Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #2456 next resume »»
CONTACT INFORMATION:
View contact information...

Dept of Water Affairs (SWA) Geohydrologist. Geohydrological investigations in South West Africa. IBM mainframe. Sandy aquifer investigations. Well testing. Geophysical studies.

UOFSLecturer/Researcher. Geological and geohydrological studies including mapping, aquifer (fractured/solution) testing and evaluation. Investigations included wire-line logging and groundwater geochemistry. Geological mapping of dolomites in N Cape, Karoo sequence in OFS. Small team research work. Finite element and finite difference modelling. HP mini computer; ICL & UNIVAC.

SOECOR Reservoir Engineer. Offshore oil well geophysical log analysis Schlumberger), testing and evaluation. On site project work in conjunction with engineers and geologists. WANG mini computer.

JCI Computer Geologist. Coal evaluation studies including geostatistical and geohydrological studies; computer modelling of coal borehole data. Geological database analysis and design (Cyber & NAS). Computer package investigations. Database requirements analysis and output specifications. Project work in conjunction with geologists, engineers and programmers.

Computer Sciences Limited Snr Technical Coal Analyst. Part of mining team. Evaluation studies on UNIVAC and micro computers. Analysis, design, programming (FORTRAN/BASIC) and support of general applications, including statistics and geostatistics. Computer evaluation studies and user requirements analysis for the coal industry including geohydrology. Strong client liaison.

ARMSCOR Snr Technologist. Systems manager- team of six. Operations and project management. Mainframe(IBM), mini- (Prime, PDP 11 and Gould) and micro computer applications in systems engineering. Involved in on-site weapons testing Database design and CAD applications. User liaison and support. Part of Division's management team.

GFSA Snr Geologist. Geological database analysis and design. Mainframe (ICL) and micro computer applications in geology.
Computer consultant to Geological Division: operations, support, software evaluation studies, liaison with groundwater mechanics team (mine dewatering) and GFSA computer department.

Central Data Systems Consultant. Part of mining team. Broad spectrum of geological and geohydrological computer applications' consultant to mining industry. Geographic Information Systems consulting. Hardware and software marketing. Prime mini- and micro computers.

Computer Foundation Consultant. Geographic Information Systems (GIS) consultant. GIS evaluation studies. Information systems management consulting and marketing. Sales support. Technical evaluation and support. Strategic market planning and implementation.

Geo Consultants (Recent) Private Consultant. Geographic Information Systems
(GIS) and general computer consulting and support. Computer training courses. Systems project management and project management of GIS implementations (town councils). Geohydrological and geological investigations including mapping, well field layout, aquifer testing and modelling, ongoing aquifer monitoring. General management consulting
Most current consulting is with the Dept. of Water Affairs & Forestry (DWA&F) as general- and project manager of their GIS User Support Section. This Section renders a comprehensive GIS (ESRI suite of products, including ArcGIS) support function to the entire DWA&F and its Regions. The support involves database- and general systems development (Deplphi & VB), customized applications of ArcView and Arc/INFO, ArcGIS, GIS training of DWA&F staff members, mapmaking, data conversion and editing, GIS packages (ESRI) support.
This Section also houses a Graphics Office which provides a graphical support function (design, layout, scanning) concerning publications, presentations, etc., to the entire DWA&F and its countrywide Regions. Sowtawre & hardware tools in use, include: Adobe Illustrator, -Photoshop, -Acrobat & -In Design, Painter, Corel Draw, Freehand, OmniPage, on Macintosh G4 (OS X) and Win 2000/XP computers. Operations takes place in a Novell LAN/WAN & Sun Unix environment.

QUALIFICATIONS

Degree University Subjects

Bsc UOFS Geology, Geohydrology, Physics, Maths, Chemistry
BSc(Hon) UOFS Geology, Geohydrology
(cum laude)
Msc UOFS Geology, Geohydrology
MBL UNISA

COURSES

Course Name Institute Subject

IS Methodologies
Infomet: Infomet Strategic Information Methodology
Business Analysis
Logical Specification
Physical Specification
Project Management

Tetrarch/1 Mgt. COMCON Strategic Information Technology Planning
Consulting
Methodology

Systems Administration
UNIX
Prime

Operating Systems
Windows-98/2000/ Various
XP/NT
Mac OS 7.x.x/9.x/ Self Study
10.2.3
GPS CSL
PRIMOS PRIME
ROSCOE IBM
UNIX CDS

Programming Languages
C CDS
FORTRAN Various
Pascal Various
BASIC Various

DBMS
INFORMIX DWA&F RDBMS
Ingres Polygon Systems RDBMS
Database Design Various General DBMS
MANAGE CSL Hierarchical DBMS
MIMER GFSA RDBMS
RELGRAF Vector Graph. RDBMS
INFORMATION PRIME RDBMS

CAD
GRAFTEK Vector Graph. CAD

Other
Computer Science UNISA Non-degree purposes
Project Mgt. Self Study
Louis Allen Mgt. ARMSCOR
Present. Skills Don Gray
LOTUS Various

Geographic Information Systems
ARC/INFO, GIMS (ESRI) Geographic Information System
ArcView
ArcGIS Self Study Geographic Information System
SDE Self Study Geographic Information System

ReGIS Comp. Mech. Geographic Information System
SPANS Infovision Geographic Information System

Geological Packages
MSCEDES CDC Coal Evaluation Package
CORES CSL Coal Evaluation Package
DATAMINE MICL Mining Evaluation Package
Stats/Geostats Wits
Geostats GEOSTOKOS

Oil/Gas
Well-Log Analysis SCHLUMBERGER Geophysical Well Log Analysis
Well-Log Analysis CSIR Geophysical Well Log Analysis
Mud Course SOEKOR Oil Well Testing
Reservoir Eng. SOEKOR Oil Well Testing

Groundwater
FEA UOFS Custom Finite Element Analysis System
FDA UOFS Custom Finite Difference Analysis System

COMPUTERS

Mainframe/Minis

HP9800 Finite element analysis, contouring, geochemical analysis, aquifer analysis, HP BASIC

WANG Well-Log analysis, FORTRAN, BASIC

Cyber Database applications, FORTRAN, BASIC, contouring, Coal evaluation studies

NAS Database applications, FORTRAN

UNIVAC Database applications, FORTRAN, BASIC, contouring, statistics and geostatistics

IBM FORTRAN applications programming

GOULD Systems management, systems programming, Database applications, FORTRAN, CAD

PRIME FORTRAN, C, INFO BASIC, Database applications, systems programming, systems management, GIS, Coal evaluation studies

PDP/11 FORTRAN

Micros PC & Macintosh

Experience was gained on mainly DOS and Windows based machines in technical as well as general business applications and statistics. In the early stages of micros, work was mainly done on CP/M based machines.

Various application packages, including word-processing, spreadsheets, DBMS's, CAD, GIS, general scientific and others were used. Programming was done mainly in FORTRAN, BASIC, Pascal and C.

GENERAL

Through the MBL course experience was gained with a wide variety of real world industries and management applications, on the operations- as well as business- and strategic management levels. These includes Mining companies (Gold Fields, JCI), SASOL (Geological Division), various municipalities and small sized businesses.

Areas of interest include consultancy work in geographic information systems and information technology consulting. Project management. Geohydrological and geological studies, business activities such as strategic and business planning and marketing.

PERSONAL

Date of Birth: 16 February 1951
Marital Status: Married
Present Occupation: Private Consultant
Society Membership: GSSA

View contact information...
«« previous resume next resume »»
Search Results (Resumes 2201 to 2250 of 6390)Go to Search Parameters...
Brief Description
Provide day to day on-site supervision of drilling operations to ensure operations are performed in accordance with the Drilling Program in a safe cost-effective manner.I m responsible for Health and Safety procedures being continuously enforced
Development, maintenance and utilization of the full field reservoir simulator
I am an enthusiastic and professional Marine Engineer / Plan Maintenance System Engineer, working with AMOS and RAST Programs. I am quick to grasp new ideas and concepts, and to develop innovative and creative solutions to problems.
Total Exp. 2 years. Exploration, Drilling, Workover - offshore and onshore wells. Estimating cost of oprn., coordinating with service providers, supervising drilling operations.
PLC programming, installation and commissioning of motor drives/ process controller and instruments and have expertise in board-level repair of electronics controls and PC board.
•Leadership Quality,•Loyalty with the assigned responsibility,•Decision making •Desire to produce better results than previousability,
Drilling supervision and engineering, well control instructor, rig commessioning
Reservoir Engineer, B. Tech (Petroleum Engineering), 11+ years in reservoir simulation studies, development planning, performance review, well equipped with most of analytical aspects
Mechanical/Piping Engineer with 13 years experience in offshore industry looking for new challenge. Good communication, organisation skills. Team player. Good knowledge of piping and mechanical codes and standards, Caesar II, PV Elite, CodeCalc.
10 years experience in the oilfield Drilling and well services both on offshore and land rigs. Field Engineer experience performing installation and trouble shooting of drilling equipment.
SOECOR Reservoir Engineer. Offshore oil well geophysical log analysis Schlumberger), testing and evaluation. On site project work in conjunction with engineers and geologists. Geohydrological investigations in South West Africa (Namibia).Geophysical investigations.
Senior Piping Designer-Office & Field.Multi-industrial background: Experience in Food & Pharmaceutical, Petrochemical, Power (Nuclear & Fossil), Semiconductor (Clean Room) & Steelmaking as well as working for Consulting Engineers & Piping Contractors.
TRAINING OF DRILING LANGUGES SKILLS FRENCH. ARABIC. ENGLISH AND LETARATE OF COMPUTER WORD AND EXEL AND IERNET
Credential 9 years functional experience in Oil & Gas Engineering construction project and nine years in explosive department of Govt. of India.
I am a post graduate process engineer with over three years of experience in Oil and Gas and Petrochemicals. I have worked for FEED as well as detailed engineering in EPC and consultancy environment. I am familiar with process simulation as well as design softwares such as HYSYS, HTFS, FLARENET.
Project Management
Project Engineer :Responsible for execution of assigned projects from proposal to detail design completion.Responsible for ensuring that the package for submittal to the client meets all client requirements.
Specialist In DCS, P LC, SCADA, Turbines, Control & Instrumentation
22 yrs of experience in Govt of India, engineering consultancy firm (An ISO 9001 Company) and has wide exposure from basic engg to detailed engg of multi disciplinary mega projects related to Water and Environmental engineering, Infrastructure, Heavy Industry, Oil & Gas, Urba
SENIOR PIPELINE ENGINEER- OFFSHORE- SEVEN YEARS OF PROFESSIONAL EXPERIENCE IN DESIGN RELATED TO ALL ASPECTS OF CONCEPTUAL, BASIC AND DETAILED ENGINEERING OF SUB-SEA AND ONSHORE PIPELINES IN OIL & GAS INDUSTRIES BASED ON DNV RULES, BS 8010, ASME B 31.4. B 31.8 AND B 31.3 CODES.
Senior Piping Designer PDS
Refinery operator, panel operator, start-up all units in oil industry, 20 years in refinery industry.
Rig mechanic, mechanic supervisor, motorman, diesel mechanic
Offshore Survey - Client Representative, Project Surveyor, Party Chief, Engineer
Mechanical Maintenance Engineer/contract and Procurement Engineer
Worked for several drilling companies, service and maintenance organizations during my career. Managed large numbers of personnel in most of these companies. Known for effective time and cost saving procedures. Excellent safety record, proficient in human relation skills, self-starter, task orientat
QA/QC Engineer with more than 16 years in engineering & construction, from medium to large projects. exposed to oil & gas projects, onshore projects, industrial and building projects.
Quality engineer in offshore and onshore fields
Senior Instrument / Control & Automation Engineer for all phases of project execution (FEED, detailed design, procurement, construction supervision, commissioning assistance, handover to operation). 12 yrs offshore & onshore E&P oil & gas exp. (FFB, DCS, IPS, PLC, F&G, BN, Remote I/O, AS-i Bus)
Registered Mechanical Engineer Cert. No.61058,CSWIP 3.1 Cert. No.35530
Electronics Technician / Telecom / SATCOM / Electronic Tools
Specialised in PROJECT & PRODUCTION MANAGEMENT ,QUALITY , MANUFACTURING, HSE
Proficient in CAESAR II, Korf Hydraulics, AutoCAD, Primavera and MS Office.
ESSAR OIL LTD- FCCU (May 2005 to May 2008)
18 years in field operations, management, production engineering, gas processing. tight formations, CBM and shales.
B.Eng(Petroleum Engineering);Diploma(Object-oriented/Scientific programming);Experience in Cementing, Stimulation(CT/N2 jobs),Completions fluids/Wellbore clean-out tools
Production & Quality professional with five years of experience in chemical & petrochemical plants, working with multicultural people in a team environment.
Petroluem Engineering
Mechanical / Static / Pressure Vessel Engineer (~5 Years Oil & Gas Experience)
Worked both as technician and engineer in the field of Instrumentations, Analyzer and Control Systems
Wide range of well operations activities and also Onshore Support for Well Operations programmes / campaigns. Liaise directly with customers on and offshore ensuring that all activities, programmes and completions, etc. carried out meet the required safety and reporting standard
2yrs experiences as a Process Engineer, 2yrs and seven months experience as a Research Engineer and one year experience as a Laboratory/Chemistry instructor
I am having masters degree in instrumentation and 2 years of experience in Automation industry in which I did Develpoment, execution & commisioning of automation projects using SCADA (InTouch, Citect), PLC (Allen Bradley, Omron, Siemens) and different types of controllers and communication devices.
qualiy inspection
Instrumentation Engineer with 5+ yrs experience in Automation industry and Power Plant Industry.
Sub : Application for the post of materials engineer/materials controller/ logistics co-ordinator in materials department.
Bachelor degree in Electrical-Electronic Engineering. Had been working as metering engineer since 2003. leading the validation team for gas and liquid metering validation and also servicing.calibrating and validating all flowmeters,turbine meters and PD meters at workshop.
Utilized HYSYS simulation,• Equipment Sizing, Line sizing and Hydraulics, Pump selection, Heat & Material balance.
TWO YEARS EXPERIENCE IN MECHANICAL ENGINEERING SIZING, DESIGN / DRAUGHTING OF EQUIPMENTS & PIPING, SAFETY TRAINING & AWEARNESS IN OIL & GAS INDUSTRY WITH PROFICIENT USE OF DESIGN SOFTWARES & MICROSOFT PACKAGES.
I started my experience as a offshore engineer and now i am working on pipes and spools for a turkish factory in china
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   [ 45 ]   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com