Resume - 15 years experienced Mud engineer. Drilling fluids design, testing and well site...

Misco Jobs

Resume #2466

CONTACT INFORMATION:
View contact information...

Date of Birth March 31st,1964

Place of Konya-Turkey
Birth

Education 1982-1987
Middle East Technical University Petroleum Engineering
Department BS Degree.-ANKARA

Professional 1987-1992
Experience TPAO Research Center
Acidizing and hydraulic fracturing of oil wells in laboratory bases. Workover fluids design for various gas and oil fields.

1993-1996
TPAO Research Center
Drilling fluids laboratory and well site engineering. Drilling fluid additives quality testing and drilling fluids problem solving studies. Experienced in the wellsite about water based (fresh water, lime mud, sea water, saturated salt water, KCl-Polymer) and oil based drilling fluids. Experienced in, testing of drilling fluid properties according to API Specifications and management of solid control equipments

1996-1998
Kazak Turk Munay Ltd.
Drilling Fluids Specialist
Programming of drilling fluids and chemicals for the wells being drilled in Aktau, Aktubinsk, Atyrau and Ural licenses. Laboratory planning and testing of drilling fluids from the wells drilled and being drilled and quality control of the chemicals.
Preparing tender documents and tender documents evaluation for the Drilling Fluids Engineering Service. Training of mud team of Kaz Nigri according to API specified testing equipments and testing procedures. Organization of drilling fluids engineering service contractor for a qualified mud team for the drilling operations. Wellsite engineering and controlling of the drilling fluid engineers, especially, in Elemez and Laktibay fields. Responsible for the chemicals inventory management for all licenses.

1999-2001
TPAO Research Center
Drilling fluids laboratory and well site engineering. Drilling fluid additives quality testing and drilling fluids problem solving studies. Experience in the wellsite about water based (fresh water, lime mud, sea water, saturated salt water, KCl-Polymer) and oil based drilling fluids. Experienced in, testing of drilling fluid properties according to API Specifications and management of solid control equipments.

2001-Present
TPAO Drilling Department (KM ERD PROJECT- 6 ERD Wells)
Responsible for the drilling fluids (IOBM and AOBM) planning of K.Marmara Underground Gas Storage ERD project. Participation in Basic Engineering Study which was done by Horwell Engineering Co. Preparing tender documents for the drilling fluids engineering service, laboratory equipments and mud chemicals. Tender evaluation and after than participation in Engineering Study which was jointly done by TPAO and Baker Hughes Inteq project teams. Managing the installation of 4800 bbl capacity mud plant for two different oil based muds. Responsible for the modification and upgrading of rig circulation system and solids control equipments of F-320 Romanian Drilling Rig which will be used in ERD project. Drilling Fluids Advisor for TPAO Project Management and well site engineering during the drilling of top holes.

Summary of Testing and Planning of Drilling Fluids-TPAO
attended Formation Evaluation-TPAO
courses Pressure Control-TPAO
Pressure Control-Berentest, Atyrau-Kazakhstan
Solids Control Equipment Seminar, Swaco-Houston
Advantage Engineering, Baker Fluids-Houston
Advanced Drilling Fluids Systems, Baker Fluids-Houston
Schedule & Cost Control in Project Management,
UCTEA Chamber of Petroleum Engineers
IWCF Pressure Control Certificate (Expiry Date: 21th Nov. 2004)

Professional UCTEA Chamber of Petroleum Engineers. (Turkey)
Memberships

Computer Windows 98-NT-2000-XP operating systems.Windows Office Applications
Experience

Languages English (written and spoken good)

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1651 to 1700 of 6519)

Go to Search Parameters...

Brief Description

I am chemical engineer seeking position is Production, process and design. I am harworking and good learner of new technology. I have excellent interpersonel skills and organisational skills.

I am a mechanical engineer with experience in the Power Generation industry. I have worked for Siemens/Westinghouse as a field engineer, managing gas turbine upgrades and repairs. Also I have worked for Air Products supervising hydrogen plant construction and operations. My background also includes

A result oriented professional with proven abilities in plant Electrical & control system. Preventive & Breakdown Maintenance in the field of Oil & Gas and Petrochemical Industry. Installation, Maintenance & Trouble shooting of Electric drives, HT & LT Switchgears & Protection Relays, Control Panels

Master of Engineering ¡V Petroleum Systems, University of Regina, Canada

IIW-qualified welding engineer with eight years of progressively responsible inspection and engineering positions. Comprehensive knowledge of fabrication standards and codes , welding , Post-weld heat treatment (PWHT) , mechanical and Nondestructive testing (NDT), pickling/passivation and painting

Electronic/Diesel Hydraulic/Controls Technical Writier with field and military experiance.

Drilling Technician

A seasoned subsea systems engineer with a detailed understanding of trees, controls and manifolds from front end feasibility and conceptualisation to offshore installation and commissioning.

Project Management and Engineering Experience in Oil-Gas-Refining, commercial and other industrial sectors.

qualified in six modules of different aspects of corrosion,and the confidence gained throughout the years while running my own consultancy

MWD Engineer

Control system designer / instrumentation

Civil / Structural Designer, PDMS, AutoCAD,

Quantitative Interpretation for Reservoir Characterization

13 Years Hands on Experience in Inspection (Plant Inspection) & Quality Control in Fabrication, Installation and Testing of Process & Utility Piping Work, Sub Sea Pipeline Work, Pressure Vessel and Offshore Steel Structures like Jacket, Deck, Bridge etc. in the field of Oil & Gas Development.

•Over 20 years of experience. •DCS- Delta-V , Foxboro I/A system and YOKOGAWA . •PLCs- Gould Modicon, Askawa, August Systems, HIMA etc. •Foundation Field Bus •Analytical systems Design and Engineering - Physical Property Analyzers, NIR •Field Inst. Engineering. •System commissioning.

Company representative on sales negotiations and jobs. Coil Tubing Operator on OTIS coil tubing unit. Heavy equipment maintenance, boilers, pumps, compressors, and turbines.

Diploma in Mechanical Engineering, Diploma in Industrial Safety from Central Labour Institute- Mumbai, H2S Awareness & Rescue Operation, Safe Journey Management, Road Safety Management, Job Hazard Analysis, Permit to Work System, Gas Testing, Incident investigation & Accident reporting.

I have worked for multinational and International companies in the Middle East like General Dynamics, Babcock & Wilcox, and Delta Corporation. I look for a job as QA/QC Engineer/Specialist or Plant Manager.

I have 15+ years experience as an Instrumentation & Control Systems Design Engineer along with seven years I&C construction and commissioning experience at locations throughout the globe.

I have varied experience earned through honest means in Chemical, Oil & Gas, Petrochemical , Water treatment and other related areas by hard work, sincerity, dedication, team spirit and conviction.

A Mechanical Engineering PhD graduate seeking engineering and research work as a Mechanical Engineer.

•Ability to solve petroleum production problems involving design of petroleum production facilities •Engineering and project management experience in the oil industry •Strong planning, communication and presentation software skills

15 years experienced Mud engineer. Drilling fluids design, testing and well site engineering. Solids control equipment management

Drilling Engineer with 12 years of experience in drilling and workover supervision, including 2 years of well construction planning. Also 1 year of work as a Safety Engineer.

Instrument and control system Engineer having 7 years experience in Oil & Gas field.

An Automation Engineer with 4years experience in power plant project

Electric Technical Officer (ETO)

FEM,Structural dynamics, Structural analysis, FEM softwares

I am an Experience British engineer with over 15 years of diverse engineering experience, currently working for SHELL, as an Interface Manager for the Bonga SW, 7BUSD Project. I do have strong analytical and judgemental skills, strong team player. Capable of organizing and motivating technical emplo

electronics & electrical equipment maintenance, warehousing & procurement.

PDS Designer

I have over 11-year field exploitation and G&G Modeling and reservoir simulation experince and extensive competency in reservoir management, economic evaluation, reserve estimating and booking, risk analysis, welltest interpretation, well perfomance analysis and stimulations.

Reservoir Engineer with a multi-disciplinary background and 5 years experience in Algeria, West Africa and South America, seeking a challenging career move

An enthusiastic and self motivated Production and Process Engineer, with experience on production optimization and surface equipment designing and evaluation, focused on maximizing asset production capacity and productivity in the oil and gas industry.

Current Industry: Offshore Piping/Platform/Marine Construction.

CFD coding using C++, Design and Analysis in CFD using FLUENT, Modeling and Structural analysis using ANSYS, Process flow sheeting and simulation using Aspen Plus, Batch process Unit operations and hands on experience in handling chemicals

Control Systems engineer,14+ years experience

Instrumentation and control forman

I would like to submit that I have total five year experience including four year as a Reservoir Engineer. I have great knowledge of different software which is mostly used in the oil industry. I worked as a team member for conventional Reservoir calculation and simulation as well. My basic Educatio

QA/QC PIPING ENGINEER/ INSPECTION ENGINEER.

Petroleum Engineer Ourhoud Field Development, Algeria Jun 2003 to Present

Having +10 years of Gas Processing, Fertilizer & Petrochemical Plants operational and supervisory experience.

Over 8 years experience as a piping team member and leader involved in oil, gas and petrochemical plants. Participated with famous European companies (Foster wheeler, Lurgi, Davy Process Technology, AKPG Kvaerner) as the main contractor, sub contractor or consortium member

Controls Eng. Tech.

Instrument engineer

Senior geophysicist: 2D land seismic data processing (OMEGA), meeting with clients, supervising projects, PreSTM velocity model building, full responsibility of 2D projects, Basic knowledge ProMAX processing system

Sr Rotating Equipment Engineer

Process Engineer (Chemical Engineering)

I HAVE +10 YRS EXP IN A PETROLEUM LABORATORY OF OIL REFINERY IN INDIA,HAVE KNOWLEDGE OF TESTING ALL PETROLEUM PRODUCTS.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 [ 34 ] 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out