Resume - Quality, Safety, Health, Environment and Security Professional w/ 17+ years in I...

Misco Jobs

Resume #24754

CONTACT INFORMATION:
View contact information...

EXPERIENCE
December, 2004 - Present
ExxonMobil (Mobil Producing Nigeria)
Port Harcourt, Nigeria
Safety and Quality Systems Implementation Consultant

Serving as a contracted Safety and Quality Systems consultant for ExxonMobil joint venture's drilling group in Nigeria on a rotational basis. Primary areas of responsibilities include, providing guidance to multiple contracted safety and quality systems consultants on two semi-submersible and four jack-up mobile offshore drilling units, operated by three different drilling contractors under contract with ExxonMobil.
Assure that ExxonMobil and the drilling contractors quality and safety management systems are bridged and in compliance with contractual agreements to provide operation efficiency.
Conduct internal quality and safety verification audits on each of the six units to assure that the ExxonMobil, Operations Integrity Management Systems, (OIMS) along with the contractors QHSE systems are being implemented to assure that the ExxonMobil Corporate operational and QHSE objectives are met.
Conduct pre-operational rig acceptance inspections to assure that drilling units meet ExxonMobil standards, SOLAS, MODU, and other regulatory requirements as established by the International Maritime Organization (IMO) and national regulatory bodies. (Department of Mineral Resources)
Assure that vessels supporting the Drilling Department, under the direction of Marine Logistics are maintaining compliance and fulfilling contractual obligations when in the field.
Advise field safety training supervisors in addressing QHSE compliance issues on a case by case basis.
Primary focus is to assure that the overall efficiency of operation is maintained at a high standard, QHSE programs continue to be a value added service and advise on QHSE measures to further reduce losses and increase profitability.

July 2003- December, 2004
Hornbeck Offshore Operators
Covington, Louisiana, USA
Director of Quality, Health, Safety, Environment and Security

Reporting directly to the Vice President on a frequent basis to strategize compliance, evaluate safety analysis, new programs, value-added services and corporate loss control trends.
Responsible for directing two regional QHSE Managers and multiple contracted security safety and quality systems contractors in the development and implementation of quality, health, safety, training and security programs for a fleet of twenty-eight tug and barge units and twenty-three Offshore DP / Support Vessels in support of offshore drilling activities.
Evaluate Company QHSE and Security needs analysis and risk potential reports from QHSE Managers to assist in the tactical and financial application of programs.
Develop Total Quality Management systems to obtain ISO 9000 and 14000 certification through American Bureau of Shipping and assure compliance audit are conducted as scheduled.
Assure that all elements are in place to assure that all the International Maritime Organization's resolution for vessel and facility security programs are constantly in compliance.
Direct teams in HAZOP, HAZID or Root Cause Analysis studies and determine cost effective solution for financial returns on capital expenditures for the approval of the Board of Directors.
Evaluate vetting documents for accuracy during contract negotiations to normalize capitol expenditures and negotiate shared costs for insurance or additional labor costs.
Development, implementation and instruct managers on behavioral based safety management issues to produce proactive employee skill development programs.
Evaluate bridging documents between Operator's and Subcontractor's existing safety, fire prevention, security and training programs.
Lead QHSE Department in Hazard Analysis, Hazard Operability Studies and Safety Case studies for new and existing operations.
Direct the development of corporate emergency drill, training and inspection criteria on an ongoing basis.
Evaluate the risks as presented by project team leaders on new-build vessels and shipyard modifications.
Advise on modifications to meet international standards under the IMO and evaluate the management of change process.
Work closely with Human Resources and Claims Directors in the application of risk management and mitigation.
Manage CALMS, Claims and Loss Management Systems program under the authority of the I.T. Department.
Manage HR Prospective with the HR and Claims Department.
Assure contractual compliance with legislative and QHSE portions of contracts awarded by operating oil and gas companies.

March, 1995 - July, 2003
Smedvig Asia Ltd.
Bangkok, Thailand
Quality, Health, Safety and Training Manager

Reporting to the Managing Director and Operations Director on a frequent basis to discuss training compliance, safety analysis, new programs and corporate loss control trends for eleven, mobile offshore drilling units operating in four countries.
Evaluate vetting documents for accuracy during contract negotiations to normalize capitol expenditures to negotiate shared costs for insurance and additional labor costs.
Responsible for managing three regional QHSE Supervisors in the development and implementation of fire prevention, training, quality, health, safety programs, practices and procedures.
When requested or required by contractual obligation, assisted operating companies, Unocal, PTT-EP, Chevron-Texaco, ESSO, Shell and BP in conducting safety equipment and management systems audits on Production or LQ platforms at various stages.
As a lead member of the audit team my duties included platform commissioning inspections prior to online production, online platform safety and design inspections. Focusing on pressure vessels, maintenance records to verify validity of hydrostatic and NDT testing, and general platform safety equipment and systems.
Develop quality assurance plans for new build and shipyard modification projects.
Evaluated Corporate maintenance programs to assure critical items are highlighted and frequently inspected.
Assisted PTT-EP and POGO in training Asian field safety officers in concepts of safety audits and inspections.
Submit accurate training needs analysis and risk potential reports on a timely basis to the Company, drilling and production departments of various operators.
Conduct frequent offshore training, safety and fire prevention audits as required by operating oil companies or regional legislative bodies.
Lead teams in HAZOP, HAZID and Safety Case studies for Smedvig new build projects and assist operators in safety case studies for tension leg platform and spar platforms.
Determine if cost of engineering or modifications designs to reduce losses is financially viable to the capital return and submit conclusions to Corporate.
Supervise, direct and liaise with three regional safety & training coordinators and eleven rig safety and training officers to assure fire prevention, safety and training compliance.
Submit statistical, safety and training information during contract bids and assure contractual obligations are adhered to.
Development of programs to achieve and maintain ISO 9001 and ISO 14001 certifications.
Development of computer database for training, safety, health and fire prevention monitoring programs. Develop, maintain and control issue of all level 1, 2 and 3 Quality Systems manuals.
Development, implementation and instruct employees on behavioral based safety issues to produce a proactive employee skill development programs.
Develop bridging documents between Operator's and Subcontractor's existing safety, fire prevention and training programs.
Evaluate fire and emergency team leaders during offshore and tabletop drills in conjunction with operators and subcontractors.
Act as Assistant or Regional Incident Commander during all drills and actual emergency events.
Audit service providers QHSE and training management systems as a part of the tendering or bid process.

1991-1995
Marine Spill Response Corporation
Savannah, Georgia
Lead Responder Safety and Training

Responsible for oil spill response safety, fire prevention, safety training and ready state safety.
Conduct initial safety briefings; perform site monitoring and surveys to establish site safety plans, projected calculations for the spread of contamination and established decontamination areas.
Trained 370+ subcontractors in Hazardous Waste Operations and Emergency Response. Directed subcontractors in safely deploying response equipment, enforce safety regulations and submit accurate reports on safety issues.
Instructed crews in maintenance of fire prevention and safety equipment onboard three, 110' purpose built emergency spill response vessels and three, 60,000 BBL Tanker Barges.
Assure safety audits, fire and life safety equipment and training reports are accurately submitted on a routine basis.
Facilitated training on corporate fire and life safety procedures, in addition to evaluating periodic emergency drills.
Established compliance programs under the OSHA voluntary compliance program for shore side facilities and preposition locations.
In addition worked closely with local and State and Federal legislative bodies with regards to reporting emergency readiness drills and training compliance.
Coordinate and conduct all industrial hygiene, fire prevention and safety training functions as required.
Maintained and tracked waste storage and disposal records.
Managed employee exposure records, medical evaluation and hearing conservation programs.
Maintain all employee exposure records and medical evaluation program findings.
Evaluated and designed fire protection systems and equipment to assure such met legislative requirements.
Served as Secondary Incident Commander advisor during initial stages of tabletop drills and actual emergencies.
Establish personnel and equipment decontamination sites and assures that decontamination equipment is maintained at sufficient levels.

1989-1991
Seafarers International
Jacksonville, Florida
A/B Tankerman / Trainee Third Officer Unlimited Tonnage, Tankership endorsement

Responsible for navigation watch, operations and ships safety and security acting in the capacity of a Third Officer trainee. U.S Coast Guard endorsement for various tankership operators in the United States Merchant Marine and Military Sealift Commands Ready Reserve Fleet.
Operated vessels in various parts of the world, working with multi-culture crews for various major petroleum carriers.
Coordinated weekly fire and emergency drills, meetings and safety training with all crewmembers.
Inspected all shipboard fire protection and safety equipment on a scheduled basis.
Prepare safety meeting topics and co-chair meetings.
Assure that work permits and equipment is isolated prior to conducting maintenance or repairs.
Set up confined space entry rescue equipment and monitor crews working in enclosed spaces.

1985-1989 Active Duty 1989- 1991 Reserve Status
Mississippi Army National Guard
Meridian, Mississippi
Nuclear Biological and Chemical (NBC) Contamination Control NCO

Responsible for training 115 officers and enlisted soldiers in all aspects of nuclear, biological and chemical contamination control, monitoring and protection.
Responsible for ensuring that all monitoring equipment is calibrated and maintained in a ready state for rapid deployment.
Establishing decontamination stations for aircraft, motor vehicles and other field equipment.
Conduct land and air monitoring for contamination to determine if the area is clear for occupation, as well as the level of PPE required.
Lead teams into areas to disable potential and active explosive devices.
Project and calculate down wind and forecast range of contamination.
Awards: (2) Army Commendation Medals (2) Army Achievement Medals, (6) Letters of Commendation (4), Letters of recognition
2 Honorable Discharges, Promoted to E-6 Staff Sergeant at age 21
Held 3 additional Military Occupational Specialties and level 4 top security clearance.

SECONDARY EDUCATION
International Loss Control Institute Det Norske Veritas, Singapore
Associates of Loss Control Management, 1998

Columbia Southern University, Orange Beach, Alabama
Bachelor of Science in Occupational Safety and Health, 1996

COMPUTER SKILLS
Extensive use of Risk and loss control management soft ware to include, HR Prospective database, CALMS, claims management system, Synergy, Loss control database, and other custom designed risk assessment software.
Microsoft Excel 4.0, Microsoft Word, Windows 98, 2000 and Power Point, Microsoft Access, WordPerfect 2.1, Macintosh Systems 7.0. All Lotus systems. URL development and design.

CERTIFICATIONS / MEMBERSHIPS
Certified Corporate Security Director, Hudson-Trident USA 2004
Certified safety Professional, American Society of Safety Engineers, 1995
Certified Safety Executive, World Safety Organization Malaysia 2002
Registered Safety Director, World Safety Organization Malaysia 2001
Affiliate Advisor World Safety Organization Malaysia 1999
Licensed Systems Auditor, International Loss Control Institute, Singapore 1998
Accredited Safety Auditor, Det Norske Veritas, U.S.A 1996
Lead Quality Systems Auditor, Det Norske Veritas, Singapore 1996
Certified Loss Control Manager, Det Norske Veritas, Indonesia 1996
Professional Member, World Safety Organization, 1999
Professional Member, International Loss Control Institute 1996
Professional Member, American Society of Safety Engineers, 1995

Additional Safety Training Schools

Legal Aspects of Incident Investigation, Det Norske Veritas, U.S.A, 2004
HIPPA Compliance Training, USA, 2004
Incident Command and Control, Alert Training Center, Singapore 1996
Advanced Fire Instructor / Inspector Certification. M&O Training Center, Thailand 1996
Concepts of Hazard and Operability Studies in Petrochemical Operations, Thailand 1996
Process Safety Management, IBC Training Corp. Thailand 1996
Advanced Principles of Industrial hygiene, Industrial Safety Training, U.S.A 1996
Modern Safety Management, Det Norske Veritas, U.S.A 1996
Incident Investigation Team Leader, Det Norske Veritas, U.S.A 1996
SEC's Industrial and Fire/Hazmat Seminar, Safety Equipment Company, 1996
SEC's Respiratory Protection Seminar, Safety Equipment Company, 1996
Today's OSHA: Compliance Update, OSHA 1996
Ergonomic Seminar, Safety Equipment Company, 1994
OSHA Permit Required Confined Space Entry Program, 1994
Advanced OSHA Compliance Program, 1994
Offshore Survival Training, McMillan Offshore Survival Training, 1994
Air Mask Service and Regulator Repair, MSRC Corporation, 1994
Fundamentals of Classroom Instruction, General Physics Corporation, 1993
PA-80 Maintenance and Service, NATIONAL DRAGER, 1993
HAZWOPER Instructor Training, MSRC Corporation, 1993
Basic & Advanced Marine Fire fighting certification, Miami Dade Fire Academy, 1993
OSHA Compliance certification course, ELB and Associates, USA 1993

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5151 to 5200 of 6411)

Go to Search Parameters...

Brief Description

A technocrat with proven experience in the filelds of Marketing and business development, general management of multinational Industrerial valves manufacturing organizationas with an experince of 14 years.

Bachelor of Engineering with over 20 years experience in Process Automation & Control industry.

I have extensive experience in various disciplines associated with electronics. For the past two and a half years I have been employed on a semi-submersible drilling rig. In this position I worked with various PLC controls, level controls, Seimens Step5 and Step7 control trees.

I have a BA in Environmental Studies with minors in Geology and Chemistry. I have additional graduate course/fieldwork with a geochemical focus. I have worked with the Office of Surface Mining for 2 years honing my skills in map reading, data collection and manipulation, and hydrology.

Project Maneger, Civil Engineer

Power engineer with post graduate diploma in thermal power plant engineering. Handling emergencies and restoring the plant stability in short time. Trouble shooting the problems in a short span.

Study, Designing & routing of piping

Logistics, Procurement and Materials Manager (Supply chain)

M-Tech (Aerospace) and B.Tech (Aerospace) , Specilization: Computational Fluid Dynamics

A project management and business development professional with extensive experience in bid management through to contractual completion. An impressive record in winning new business, and managing and completing projects on time and under budget.

Bachelor degree in Mechanical Engineer with an experience of leadership as a Lieutenant for the Army Reserve of the United States, also graduated from a school of Engineering courses for the Army in MS. Willing to put my knoledge as an engineer for the use of the companys that can benefit them

Contracts Manager in switchgear environment (ABB) - manage 5 Project Managers - Engineers in switchgear and associated equipment projects.

Three years experience, Market modelling and forecasting and reporting, renewable energy planning and research, spreadsheet design, knowledge of carbon, gas, power and oil

Leadership in fast paced, high stress environments

Autocad, Pro-e, Ansys, good communication skills & team player

Intermediate level geologist seeks employment abroad to advance career with varied experience. Currently based in BC, Canada, I have experience in Oil Sands and Complex coal: running drilling programs, building geology models using Mincom and Minesight, database management, coal quality...

I am a mining engineer and also has a masters degree in urban and regional planning.

I am a holder of a Bsc. in Marine Mech. Eng. - Major Offshore Engineering, with good experience in wellhead engineering, maintenance, repairs and testing. I have experience in oil fields construction activities (Onshore /Offshore)

High Diploma in Chemical Engineering australian associatio certificate holder - i corr level i & ii holder assigned as a coorosion engineer and cp systems construction supervisor in pipe line water supply project familiar with cp monitoring and related topics

Age:29, Education: Chemical Engineering, University of Twente, The Netherlands. Work experience: 3 years with ABB Lummus Global, The Hague: Project Control Engineer on large EPC projects.

WELDING AND GAS CUTING WORKS (UNIQUE TECHNOLOGY )

I would like to apply for any entry level job that is available. I have only military experience. I served in the US Navy where I learned CPR, and damage control for on and off-shore situations. I have completed an Associates Degree in Petroleum Engineering Technician from Montana Tech University.

Project Manager for Oil and Gas Construction work. Have build Gas Plants for PDVSA, Enron, Monsanto, etc. Pipeline work For oil and gas for PDVSA, Benton, etc. in Venezuela

He has more than 25 years of experience; from his current work in hydrogeological and hydrochemical assessment, environmental monitoring, and capacity building. He has managed many projects as well as acted as team leader on various project components.

ESP, PCP, SRP Application Engineer

NEBOSH Certificate availabe. About 9-10 years practical experience in construction, operation, maintenance as HSE Advisor and Coordinator.

Construction HSE Manager with 18 years of experience encompassing the areas of Safety Adviser through to Corporate HSE Manager. Formerly a Senior ranking Fire Officer (nine years experience). Five year apprenticeship served as a mech. engineer. Degreed engineer with both off-shore and on-shore exp.

Mechanical Engineer with over 7 years experience in QA/QC of mechanical construction activities, Welding, Painting, NDT, Insulation, Implementing QA/QC procedures, Auditing

Software Developer .NET, Java SQL

Maintenance Manager Engineer Middle East Experience, Looking for work in UAE

6 Years in Power Generation, Steam Generation(HRSG) & Desalination (MSFE).

M. TECH. in chemical engineering with specilization in industrial safety and hazards mgt.

Human Resource Profession

An Experienced HSE Supervisor having worked with many Multi national companies and being recognised by those companies for the excellent job done. The Clients include Exxon Mobil, Single bouy Moorings (SBM), Qatar Gas II, British Petroleum (BP), Anadarko, Saudi Aramco, ARCO Dubai, DPC, RAKGAS, etc.

I am a machinist by trade, got into service tech., then field machining and enjoyed it.

I have an overall experience of 17 years out of which 11 years in Oil & Gas Development Projects. Presently I am working as Group Project Engineer in a Major British Exploration & Production Company in Edinburgh UK. Following are my current responsibilities:

Technical Mechanical Maintenance I am a person, very serius, inteligent, honest,i think in the people like shaf of the life

18 months of practical Extensive use of OpenWorks, Z-MapPlus, DSS and Geological & Geophysical Dataloading, Exposure to DIMS, hands on experience on ECLIPSE & SURE simulators, SUN-OS 4.1.X, Solaris 2.X., Silicon Graphics-OS, IRIX 6.5.X

Looking for a suitable post.

instrumentation engg

Dear Sir/Maddam, From information, that your company has recruitment. Because of that, I’m so interested in joining for empty position. This is my resume, CV and other document.

Commissioning

Handling key customers like Saudi Aramco, Sabic Affiliates, Saudi Electricity Company, Saline Water Conversion Corporation, etc in the western region of Saudi Arabia related to Sealing Solutions.

BSc, 10 years field/management experience in pipeline integrity, pipeline inspection, direct assessment, risk models, project management, surveys, non destructive testing etc.

Quality, Safety, Health, Environment and Security Professional w/ 17+ years in International upstream and downstream O&G sectors

I have 25 years of multi disciplined, design, engineering, and project management experience with very strong automation skills. I am highly experienced with specialize, automated process equipment systems for Oil & Gas, Petrol Chemical, Power Generation, Semiconductor,Pharmaceutical,Water & Waste

RESUME

• Extensive experience managing Document Control deparments within Engineering, Construction and Petrochemical Industries.

Site Construction Manager Oil and gas Industry. Over 20 years experience. Process plants, facilities and pipelines.

I have experience with SCADA system using Citect and RSView (Allen Bradley) as Man Machine Interface (MMI) and control system such as Allen Bradley PLC5, SLC500, ControlLogix, SimaticS5 and SimaticS7.

First Prev 101 102 103 [ 104 ] 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out