Resume - I am a Chemical Engineer from Texas A&M University-Kingsville. I have my Masters...

Misco Jobs

Resume #2490

CONTACT INFORMATION:
View contact information...

Objective: To work in chemical/petroleum industry in areas of process development.

Education:
2001-2003 Texas A&M University-Kingsville.
Master of Science in Chemical Engineering, Dec 2003 GPA 3.55/4
1995 – 1998 Pune University, India.
Bachelor of Science in Chemical Engineering.
1992 – 1995 Pune University, India.
Diploma in Chemical Engineering.

Academic coursework:
Chemical Engineering Thermodynamics, Rheology of oil fields Fluids, Optimization, Simulation, Process Heat Transfer, Process Dynamics and Control, Air Pollution and Control, Gas Purification, Separation Process.

Project's:

• "Database design for Perturbed Chain Statistical Associating Fluid Theory (PC-SAFT) equation of state using Visual Basic" as a part of my graduate research project. This thermodynamic equation holds good for VLE/LLE for components/mixtures of long chain hydrocarbons/polymers.
• Propane Deasphalting (supercritical extraction) was studied for base oil recovery.
• Class project on "Simulation of gas treating plant using HYSIS". This involved designing and simulation of separator, sweetening unit and dehydration unit and the plant economics using CAPCOST package.
• Class presentation on "Anomalous behavior of oil in water emulsions". Creaming effect in emulsions was studied.
• Class presentation on "Effect of particle size on oil in water emulsions".
• Class project on "Design of Turbo-Expander" using Design II software. De-methanizer, de-ethanizer and de-propanizer were simulated.

Experience:
June 2002-April 2003 Texas A&M University-Kingsville.
• Working as instructor for undergraduate Math class. Job involves conducting lectures and assisting the students with their algebra and geometry coursework.

Jan 2002-April 2002 Texas A&M University-Kingsville
• Teaching assistant in the department of Physics. Assisted students in their laboratory experiments, graded reports and conducted pre-lab lectures.

September 1998 – January 2001 GEBetz (India) Ltd.
Account Engineer.
Responsibilities:
• Providing on-site expertise/technical know-how to assist in solving operating problems related with cooling water and improve plant productivity.
• Sales for the site increased from 10 million Rs to 15 million Rs. Chemicals sold were corrosion inhibitors, dispersants, copper corrosion inhibitors, non-oxidizing biocides and closed loop inhibitor.
• Responsible for chemical applications in cooling tower systems, closed cooling water systems and calculations that covers water treatment applications.
• Involved in commissioning and operation of pre-cleaning and passivation of the pipelines during plant start up.
• Chemical analysis of the water samples for the laboratory based tests like measurement of pH, turbidity, calcium hardness, chlorides, phosphates, alkalinity, Sulfate Reducing Bacteria (SRB) and Total Bacterial Count (TVC) and corrosion rates. Equipment's used were Jar test, Gas chromatography, polysonic, spectrophotometer, Turbidity meter etc.
• Commissioning and operation of process water treatment for the desalter in the Crude Distillation Unit.
• Inspection of heat exchangers for corrosion, scaling and fouling during plant shutdowns.
• Unloading, storing, transfers and chemical feed adjustments as directed.
• Supervised sand filter cleaning and localized dosing for corroded heat exchangers.
• Preparing daily and monthly reports and maintaining a variety of records, reports and logs.
• Have successfully handled towers during sweet and sour leaks.

May 1997-August 1997 Shembekar Industries Ltd.
• Design of heat exchangers and distillation columns for improvement projects.
• Assisted in preparing PFD, PID's, mass and energy balances.
• Training in oil recovery.

Additional skills:
HYSIS, Pro II, Design II, MATHCAD, MATLAB, HEXTRAN, CAPCOST, C/C++, Visual Basics 6, Oracle 8, MS Word, Excel.

Awards:
GPA Mike Baker Memorial Scholarship (Texas A&M University)

Additional Information:
• Well organized and responsible and posses' positive attitude.
• Equally comfortable in working alone as well as in a team.
• Demonstrate initiative, dependability, honesty, sincerity and result orientation.
• Willing to relocate.

References:
Available upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2901 to 2950 of 6411)

Go to Search Parameters...

Brief Description

Proficient in Excel and in Word. Proficient in Primavera Project Planning software.

A graduate of University of Port Harcourt, Faculty of Science, Department Of Geology (Bs.c Geology) Rivers State, Nigeria. Working currently as a contract staff with Shell Petroleum Development Company Nigeria Ltd.

B.Eng. Electrical Electronics. CCNA-Abuja,Nigeria. IEEE-USA Member, Networking Telephony/Data, MicroSoftExcel etc, Travelling & Visiting New places

Engineering skills, AutoCad, MS Word

Petroleum and gas engineer.

Mechanical, Estimate/proposal engineer

Chemical engineer from pune university, looking for job in oil field .1 year exeprience in production unit

Highly motivated, creative and versatile chemical engineer with an experience designing refinery plant for a gasoline production from crude oil refineries. Especially skill in optimizing heat recovery by using pinch analysis. Excellent management, negotiation and public relation skills.

Instrument Engineer working in Consolidateed Contractos International company,Qatar.Working here in pre comissioning especially in loop checking and function tests . Have experience in DCS Foxboro and PLC Triconex with Invensys Systems.Working under Chiyoda Technip joint Venture for RasGas project-2

BS Electrical Engineering, 10 yrs experience instrumentation oil and gas industry, hardworking, computer literate: MS Word/Excel/Projects.

Electrical High Voltage Protection Technician

Specialist of Control System in Designation of Aromatic IV Plant in Borozouieh Petrochemical Complex in Assaluyeh and in consortium with LG E&C and Toyo, Preparation of DCS/ESD Loop/Logic diagram, Instrument Location Layouts.

I have over 13 years experience related to SCR drive Disel Electric Drilling Rigs, both in Service, Manufacturing, and Preventive Maintenance.

I am currently in my 4th year (finish Sept 2003)of a Masters degree (Meng) in Mechanical & Offshore Engineering at The Robert Gordon University, Aberdeen. Since May 2002, I have worked as a Student Engineer for a large service company within the petroleum industry, Weatherford

Project Information Manager/ Intergraph PDS Administrator & Support

Have a lot of experience if field operation specifically with coiled tubing.

Vibration Analyst / Machinery Engineer. 9 Years Experience. Working on Bently Nevada ADRE and CSI RBMWare. Fluent in English.

I also have 7 years of experience in analysis packages like STAADIII & In these seven years of service, I have directly worked in multiple functions proposal Engineering & Detailed Engineering. CAESAR,CFD.I am conversant with packages PRO-E, IDEAS, CFX.

Planning and Cost control Engineer with 10 year experience in Oil, Gas and Petrochemical Industry.

I would like to apply for Network Administrator or Network Engineer post in middle east countries

Control and instrumentation engineer with good experience in project management ,construction, commissioning in power plants and chemical industries.

I am a Chemical Engineer from Texas A&M University-Kingsville. I have my Masters degree in Chemical Engineering .I have earlier worked with BetzDearborn Ltd. in water treatment field for a 27000 MT refinery. At present I am looking for a job in the Chemical/Petroleum sector.

I would like to express my interest in joining your company if there a vacancy for me as an experienced mechanical engineer graduated from K.F.U.P.M in 1993.

Looking for a mechanical working environment, with open atmosphere, welcome new idea.

Objective: Process Engineer where I can contribute technically to a growing, global and environmentally conscious energy firm. Currently a student of M.S. Chemical Engineering at Oregon State University Expected graduation date-June 2003.Worked as a process engineer in a refinery for three years

Lead Inspector For Pipe mill team for Kinder Morgan project ,Anadarco petrolium project from last six months.good command on handling team. For Onesty first priority

I am a graduate civil engineer.I am proficient in: Pdms11.6, Staad pro (Certified by engineering staff college, Bangladesh), Etabs, AutoCAD, Micro Station-V8, Microsoft Visio & Ms Office.

Planning, Scheduling, Computerized Maintenance Management System - CMMS,

I believe my experience and solid record of achievement make me an ideal candidate for any engineering position within your organization. My enthusiasm for the position and my interest in working for your Company were strengthened as a result of searching.

Diploma course in autocad, working as a design engineer for past 1 year

I am a hard worker, willing to learn a new thing, initiative and creativities problems solver. I have qualities such as good personality, strong communication skills, and excellent ability in team working. I can communicate well with other people and enjoy being part of a team-work, especially if it

I am an Electrical (Electronics & Communication) Engineer determined to get thru in expediting the Projects on the basis of self learning and self motivation I have the hands on experience while working as a Sr .Application/Project Engineer in Innovative Automation and Engineering Private Limited),

I am qualified Mechanical Engineering having 6 years of Experience in the field of Mechanical Design of Static Eqpt such as Pressure Vessels, Heat Exchanger, Column, Reactors, Indirect Hype Heater, Storage Tank etc. Well versed with International codes like ASME SEC. VIII Div.1 & 2, UHX, TEMA, PD550

Solid academic formation in petroleum engineering. Native Spanish speaker, proficient in English. Computer literate in Autograph (Esp design), FoxPro (inventories), and MS Office. Available immediately, willing to travel and / or relocate.

Analyzer Engineer

Instrumentation and Control Engineer

Lifting Equipment Inspection Engineer, Senior Welding Inspector, Material Inspector, Product Inspector.

I have 1 year field experience and 2 year off-shore process design experienced.

B.E,HAVING SKILLS IN PDMS 11.5,UNDERSTANDING P&ID'S ,preparation of piping layouts

Welding , QC , WPS , PQR , WQP, Inspection , NDT

Process Design Engineer (B.E. Chemical)

40 years, Production, Workover, Drilling Supervision, Land and Offshore

Degreed chemical engineering with an Engineer-In-Training certification and two years of process engineering experience.

I am a self motivated and well inspire graduate of Geology. With Junior to intermediate level job experience in Petroleum geology. With interest in reservoir engineering, mud logging, well logging, reservoir geology, wellsite geology, log interpretation, data entry and field engineering

I have very good experience in field management in installation, commissioning of rotating equipments and auxiliary systems such as pumps, diesel generators, compressor etc. and pipe works including piping systems. In selecting the types and standards for static equipments.

Instrument/Process Control engineer with more than 17 years of experience in Plant/Project engineering, construction and commissioning of Gas/Condensate and petro chemical industries.

17 years experienced engineer

More than 22 years (16 years in India and 6 years in Saudi Arabia) in Electrical Power/Substation/ Managerial/ Electro-Mechanical /Petrochemical/ Geographical Information System (GIS), fields.

Have a strong :Managerial and technical skill, leadership skill, agent of change, interpersonal and intrapersonal skill, Communication skill, Good motivator, Familiar with API and ASME Codes Standards, Familiar with P&ID, Familiar with ITP, Familiar with Rotary and Static Equipments, Installing Rota

Senior Planner / Scheduler

First Prev 51 52 53 54 55 56 57 58 [ 59 ] 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out