Resume - Education: Master in Chemistry Various certifications on Drilling Technology an...

Misco Jobs

Resume #2503

CONTACT INFORMATION:
View contact information...

EDUCATION: Master of Science (M.Sc Chemistry)

TECHNICAL QUALIFICATION:

BASIC TRAINING ON DRILLING TECHNOLOGY

* Obtained Training in Oil & Gas Training Institute on Drilling Fluids Technology.
* Advancement in Drilling Fluids Technology by M/S MESSINA INTERNATIONAL.
* Mud Technology (Oil Based Mud) M/S DRESSER.
* Solid control Engineering and Application by M/S DRESSER.
* On Job Training as Field Chemist (Formulation and testing) at Well Site.
* Six-Month Course on Cementation Technology (as Chemist) By Oil& Gas Training Institute.
* Cementation Technology Course by M/S HALLIBURTON.
* Cementation Technology Course by M/S MESSINA INTERNATIONAL.
* On Job training as Lab. Chemist in Cement slurries design Laboratory.
* Working in Production lab, Water analysis, Oil analysis and core analysis.

TRAINING ON DRILLING TECHNOLOGY ON MUD, CEMENTATION AND ACIDISATION IN CANADA

* Six weeks Training on Cementing Fundamentals and Foam Cementing in NOWSCO WELL SERVICES CALGARY CANADA from November 1987- December 1987. Formulating the recopies and analyzing the water samples.
* Extensive Training on Mud, Cementation and Stimulation Technologies by ALBERTA ADVANCED EDUCATION EDMENTON CANADA from August 1990-December 1990 and attended courses on the following areas: -

Well Operation /Engineering by ADAMS PERSION ASSOCIATE CANADA.
Acid zing, Cementation and Hydraulic Fracturing School (Analytical testing & formulation in Lab. by M/S FRAC MASTER.

Sand Production management Mud technology, Hydraulic Fracturing, Cementing technology and Formation damage by PERTEOUS ENGINEERING LIMITED.

Production Operation by Oil & Gas Consultant International Inc.

Basic Measurement School by Petroleum Industry Training Services.(PIT)

International Instructor Training by NOTHREN ALBERTA INSTITUTE OF TECHNOLOGY (NAIT).

CERTIFICATES:

* Advantage Reporting & Engineering for Fluids from Baker Hughes INTEQ from Aberdeen.
* Drilling Fluids Course Baker Hughes INTEQ.
* Managing HSE from Baker Hughes INTEQ
* One Trax Reporting from MI Drilling Fluids.
* Advancements in Drilling Fluid Technology from Messina
* Certificate from Canadian Petroleum Training Institute on Lost Circulation-Formation Damages and Air drilling.
* Certificate on Oil well Cementing from Dowell Schlumberger.
* Certificate on Production Operations from Oil & Gas Consultant International.
* Certificate on Basic H2S Alive.
* Certificate on Sea Survival Equipment.
* Certificate on Finger Injury Prevention from Schlumberger
* Certificate on Stop Program from Schlumberger.
* Certificate H2S Alive from PITS.
* Certificate on Solids Controls Equipments and Applications from Swaco.
* Certificate on Well Control from OGTI.
* Certificate on International Training Program from NAIT.
* Certificate on Hydraulic Fracturing.
* Certificate on Skills in supervision.
* Team work: Getting People to work together
* Improving personal Effectiveness
* Creative thinking
* Skills in supervision by Pakistan Institute of Management.
* Team work: Getting People to work together by PIM.
* Improving personal Effectiveness by PIM.
* Creative thinking course by PIM.
* DOS, Windows, Microsoft office, Window 98.

AFFILIATIONS: Society of Petroleum Engineers (SPE)

WORK EXPEERIANCE: More the 15 Years Experience as Mud Engineer testing mud formulations and Mud Chemicals Cement and Cement additives as per Recommended Practices of API and OCMA.

Detailed as under: -

Presently working with MI Overseas Pakistan as consultant Mud Engineer formulating and running KCL PHPA mud and Sildril mud (Silicate mud). Worked with operators like OPI and Premier since 1st Oct 2002.
Worked as a consultant Mud Engineer in MI Swaco Canada for CIJV for a land rig in Newfoundland Canada from July – August 2002.
From December 1997 to April 2002 worked as Drilling Fluid Engineer with Baker Hughes INTEQ (BHI) Middle East Region and worked as under:

1. Since December 2001 to April 2002 worked as Mud Engineer in Thailand off shore on Tender and Jack up Rigs with operator PTTET and Unocal. Running low solid Lignosulphonate Mud and Oil Base mud (OMB).
2. Worked as Drilling Fluid Engineer as Rotator Mud Engineer in Azerbaijan with operator Salyan Oil for running the OIL BASE MUD (OMB) from Dec 2001 to March 2001.
3. Worked as Drilling Fluids Coordinator at Baker Hughes INTEQ office at Baku, Azerbaijan, coordinating Work Over operations and Drilling operations. Designed Mud programs for Salyan Oil and GBOC (Georgia and British Oil Company.) Arranging bulking equipment and solid control equipment for Salyan Oil Drilling Operations from Feb 2001 to June 2000.
4. Worked as Drilling Fluid Engineer in (BH I) Pakistan and performed duties with various operators like LASMO, BHP, POL, PREMIER, HUNT, HYCARBEX, OGDC, PTTET, UNOCAL AND BIRTISH GAS from May 2002 to December 1997. Worked on high-density mud and also worked on KCL PHPA, Aqua Drill (KCL PHPA Glycol) and Oil Base mud.

Worked as Mud Engineer with IDF Dowell Schlumberger since September 1996 to November 1997 in Middle East. At off shore Jack up rigs and land rigs in Qatar, Oman and Dubai. Also worked with Coil tubing Drilling unit for re-entry in the horizontal section of old verticals wells in Dubai off shore.

Worked as Mud Engineer in Arabian Drilling Company (ADC), Saudi Arabia on their Khafgi off Shore operations. (Worked on oil base mud (OMB).on high angle directional wells from July 1995 to September 1996.

Worked on as Mud Engineer in OGDC and formulated various Mud System and also worked in Analytical and Quality control Lab from March 1990 – Feb 1996.
Tested various Cement slurries as per well simulated conditioned. Conducted analytical work on oil and water samples..
Worked as Part time Instructor of Mud and Cementation subjects in Oil & Gas Training Institute (OGTI) and designed a course on Cementing Technology.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1551 to 1600 of 6994)

Go to Search Parameters...

Brief Description

Maintenance supervisor / Reliability specialist / Project Management

Broad base of experience within the Pulp/Paper, Pharmaceutical/Chemical and Bio-Technology industries involving design, engineering, construction, and commissioning. Management of projects (automation, instrumentation and electrical/instrumentation systems), quality, personnel and resources.

Developing & producing plot plans using PDMS 11.2 (CLS), pipe modelling (PDMS-PMS), Equipment modelling (PDMS-EMS), producing Piping Study & General Arrangement Drawings(PDMS-CAST), Producing Isometrics(Isodraft) & used Review Reality station for reviewing the plant model.

Certified ( Project Controls, AACE, #1366), published Engineer (BSPE and MBA) with over 15 years of direct field experience in Operations, budget design, Inventory control, Drilling Engineering, Oil Well Fire Control, Well design and Turnkey Bid estimates.

Education: Master in Chemistry Various certifications on Drilling Technology and Oil and Gas operations. Worked as Mud Engineer with MI Overseas. BakerHughes INREQ and IDF schlumberger in middle east. Worked as lab chemist with QGPC Qater, Mud Engineer with ADC Saudi Arabia ETC

Pr. Management-Estimating man hours, developing WBS CBS, Progress measurement techniques, monitoring by Primavera, project control, invoicing. Engineering-Prep. basic Instr data sheet, detailed ENGINEERING of DCS, FGS, SDS, control logic, SAFE. Commissioning -Elect system of process platforms

I am experienced in long & short range mine planning, scheduling, budgeting, design of safety procedures & standards, production & destress blasting, mine backfill, ventilation, ground control, geomechanics modeling & design of stable openings (using the bifurcation theory in mechanics).

Senior controls and Scada Systems Analyst

Mechanical Engineer Bsc. Hons. Project Engineer. Commissioning Engineer

Directional Driller with horizontal experience in shale and lime. Also have workover and completion experience,

Piping Stress Engineer

Registered civil engineer with Master’s degrees and 5 years of work experience primarily in structural design

Experience on process design of oil and gas industry units, engineering and tender documents preparation. Well familiar with process codes and standards and design requirements

Piping Engineer

Programming/maintenance of PLC/DCS controllers and SCADA systems. Maintenance of electrical/electronic and pneumatic/hydraulic instrument equipment. Maintenance of fire/gas detection systems (turbines, oil/gas production facilities). Excellent communication and management skills.

I am experienced in Air separation Units (Oxygen plants, Nitrogen plants, Argon plants) and Carbon dioxide plants. I am a plant manager and looking after all the activities involving in mafucturing and selling

I am Diploma Engineer in electrical and post diploma holder in Instrumentataion & control having 28 years experience in petro chemical, Heavy chemical , Oil & gas industries in a diffr\erent position in project, maintenance of instrumentation.

Instrumentation Automation Engineer 9+ Yrs Exp

Seeking very challengeable, risky and more responsible jobs to acquire a technical/management position where engineering experience and managerial skills will significantly contribute to product and process development

Control room operator, commissioning, precommissioning, plant start up, normal shut down, fire and gas, process, production, turbine.

Technical and sound Instrument engineer

15 years in the oil and gas industry including WesternGeco and Halliburton – Landmark Graphics Corporation. Areas of expertise include seismic data management, seismic and well data loading and conversion.

I am a Senior Instrumentation Technologist with 15+ years experience in the Instrumentation Engineering field; and I am well versed in project execution from FEED through to commission and start-up with a strong emphasis on efficiency and safety.

IT , Hysys,English language

Duties and Responsibilities:

Senior coatings/painting inspector

I am an Instrumentation and Control Engineer with a Doctorate Degree. I am experienced in designing and developing advanced controllers

Rotating equipment Engineer

QA/QC Inspection Engineer

Over Eight (8) years of total experience in Process Engineering which includes Basic Engineering, Detailed Engineering for Oil & Gas Offshore (fixed platform) & Onshore Processing Unit, Underground Gas Storage Facilities, Hydrogen Generation Unit, Naphtha Splitter Unit and Flow Assurance Study fo

Electrical commissioning technician / completions

I have spent 12 Years working as a DC Surveyor / Piping Designer in an onshore/offshore environment. Two of the main construction projects that I have been involved in was the BP Holstein and the Chevron Tahiti Spars. I have also spent a substantial amount of time working in petrochemical refineries

Considerable expertise in dealing with corrosion control of oil and gas installations, resulting from over twenty years of relevant experience in upstream, midstream and downstream activities in oil and gas industry.

Control System professional with 18 years experience and PMP and Six Sigma Green belt certified

Acting as QA/QC Manager/Cordinator (Welding, Inspection & NDT), with more 15 years of experience in the Middle East and European Union in the field of Oil & Gas and power piping projects. Experienced in work with multinational engineering companies (ALSTOM. TOTAL, KAVAERNOR¡K)

Experienced Instrumentation & Control system Engineer, interest in Projects, Proposals and Commissioning

Surface and Interfecial Sciences, Condensed Matter Physics, materials Sciences, UHV Techniques, Analytical Chemistry.

I have 12 years experience in drilling oil wells(development and exploration) and operation monitering. I have a bachelors degree in mechanical engineering.

Drilling/Energy Professional, functional/technical business experience on IT, project management, operations, sales, supplier summit, strategic development. Oracle Certified Professional (OCP) DBA and EIT Texas. Strengths - drilling, workover, Petroleum engineering, IT implementation, Oracle

Become an expert in the field of Computer & Information Technology and hold a high position with broad decision-making authority

Project Procurement Manager

reservoir engineer

Environmental, Health and Safety Specialist and Industrial Hygienist experienced and Certified by the Board of Certified Safety Professioals

Experienced, highly knowledgeable and enterprising engineer with wide ranging expertise in mechanical engineering, project management, and maintenance management.

Master Degree (5 years) in Geology. 5 experience years in oil rigs, 2 as mud engineer

Coordinate Engineering and design activities on the Project across all involved disciplines for the assigned Project. Ensure effective cross-discipline coordination and resolve cross discipline problems. Preparation of project schedules

Maintenance of process control instrumentation systems and start-up and shutdown activities associated with LNG, Petrochemical, Fertilizer, and Refinery in India and Qatar.

PDS & PDMS – Piping, Equipment , Structure & Support Modeling (MDS)

Mud Engineer with 8 years of experiences.

Mechanical Engineer With 5 Years Exp.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 [ 32 ] 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out