Resume - engineering in dcs and plc system specialy YOKOGAWA CENYUM CS et CS3000 Prosafe...

Misco Jobs

Resume #2562

CONTACT INFORMATION:
View contact information...

SENIOR INSTRUMENT AND CONTROL ENGINEER

Nationality: Algerian
Age: 39 years
Sex & Marital Status: Male - Married
Min Salary: 4000 $US

2°) TRAINING AND SEMINARS:
1. TX27 PLC (Programming and maintenance given by University of ORAN (15 days).
2. SIMATIC S5 PLC Programming and maintenance given by SIEMENS Algeria (15 days).
3. Operation and maintenance of PROSAFE (QUADLOG) PLC given by YOKOGAWA Netherland (5 days).
4. Operation and configuration of DCS CENTUM CS given by yokogawa France (15 days).
5. DCS CENTUM CS Daily Maintenance given by YOKOGAWA France (5 days)
6. DCS CENTUM CS Advanced Maintenance given by YOKOGAWA France (5 days)
7. Turbine Speedtronics (SUIVIMAC II+ & MARK V) given by NUOVO-PIGNONE Algeria (10 days).
8. Advaced Maintenance of MARK V given by NUOVOPIGNONE Algeria (10 days)
9. Cimplicity Control & HMI given by GE FANUC Systems INDIA (15 days).
10. All training of Centum CS3000 given par SONATRACH Algeria (01 month)
11. Fire Fighting Training given by General Monitors Singapore (10 days)
3°) JOB SUMMARY

From 08 April 1997 at present working as senior CONTROL and INSTRUMENT Maintenance Engineer for SONATRACH (Agerian firm of Oil & Gas).
My responsibilities include:
* Under the engineering, I was directly involved in project planning, Installation, Commissioning and Start-up works particularly with DCS & PLCs Systems.
* Assist in development of a Distributed Control System (DCS) (hardware and software) using Yokogawa Intelligent Automation system (Centum CS and CS3000) with Prosafe programmable logic controller (Quadlog series)for ESD. The network involves dual node bus architecture, and fiber optic links.
* Assit in commissioning start-up and maintenance of Speetronic (control Turbine) MARK V of GE
* Assit in commissioning start-up and maintenance of fire fighting systems

4°) JOB DESCRIPTION
* Attend factory and site acceptance test (F.A.T& S.A.T)
* Calibrate loop/sequence checking and troubleshooting of process various instruments.
* Prepare loop package, inspection checklist and as built revision drawing prior for final acceptance.
* Operate, maintain and develop electrical/wiring diagram, sequence of operation, control graphic design, control loop/logic diagram and advanced computer control software.
* DCS application engineering, configuration, programming, testing, commissioning, start-up support and maintenance.
* Experience to test, install and troubleshoot ESD systems in the field such as Triconex and Moore Quadlog (PROSAFE of YOKOGAWA) ESD systems.
* Carry out all aspects of maintenance, modification, calibration and testing of Speedtronics MARK V and SUVIMACII+.
* Familiar with smart pressure, temperature, flow and level instruments manufactured by leading suppliers such as Foxboro, Yokogawa, Honeywell Fisher rosmont or ABB.
* Prepare an annual maintenance program. Identifies materials and spare parts requirements.
* Assure and organize personnel training in PLC & DCS particularly for the operation and maintenance staff.
5°) WORK EXPERIENCES:
Company YOKGAWA /JGC / SONATRACH
Position Engineering, Commissioning and Start-up Engineer
Project Hssi R'mel Pashe II revamping to YOKOGAWA DCS (Centum CS and Prosafe PLC)

Company YOKGAWA /JGC / SONATRACH
Position Commissioning, Start-up and maintenance Engineer DCS (Centum CS and Prosafe PLC )
Project Hssi R'mel South Plant

Company GENERAL MONITORS/JGC /SONATRACH
Position Instrument Supervisor and commissioning engineer.
Project Hssi R'mel Fire and Gas revamping project.

Company NUOVO-PIGNONE/ SONATRACH
Position Commissioning, Start-up and maintenance Engineer (DCS APACS and Speedtronics
SUIVIMAC II+ for PGT10 Turbine)
Project Hssi R'mel (DJB BOOSTING)

Company NUOVO-PIGNONE /JGC/ SONATRACH
Position Commissioning, Start-up and maintenance Engineer (DCS YOKOGAWA Centum CS3000 & Prosafe PLC with MULCOM Communication) and Speedtronics MARK V of GE
Project Hssi R'mel BOOSTING Project ( Installation of 11 Turbines FRAME 5 of GE)

Company A.N.A.B.I.B PLANT
Position Maintenance Supervisor.
Project Pipng Manufacture.

College Secondary college
Position Automation Teacher

6°) EDUCATION BACKROUND:
Elementary School: Khelil central School (1969- 1975)
Middle School: Khelil middle School (1976-1980)
Secondary: Ras-El-oued Academy (1980-1983)
High School: Institute of Hydrocarbon & Chemical -AUTOMATION ENGINEER - (1984-1989)

7°) KNOWLEDGE OF LANGUAGES:
Arabic: Fluent (Mother Tangue)
Frensh: fluent
English: Good Knowledge

8°) ADDITIONAL QUALIFICATION:
* Proficient in IBM PC and compatibles.
Software expertise include:
- Operating systems: Windows 95, 98,2000 and Windows NT4 server & Workstation.
- Microsoft office: MS Word, excel, PowerPoint, Access ….
- Utilities: Norton Utilities, Norton Anti-virus, MacAfee Anti-virus.
- Other Software: Intouch de Wonderware, Fix intellution,Visio Technical 5.0 and 2000
Hardware expertise include:
- Assembling IBM Compatibles PCs, excellent knowledge and experience in assembling computer (Mother Board, RAM, HD, FD, VGA Adapter, Sound Card, Video Capturing Board, SCSI and Modem.
- Controller for any SCSI device, and any other devices could be connected to a PC.
- Troubleshooting Hardware errors.
- Upgrading PCs.
Do accomplishment report and attend coordination meeting.

9°) CONTRIES TRAVELED:
FRANCE, NETHERLAND, SPAIN and ITALY.

10°) INTERESTS:
Reading, Traveling, Computers, Internet and Sport.

11°) ATTRIBUTES:
Dedicated, Self-motivated, Good initiative, Self-confidentand and assertive. Very organized and Excellent Interpersonal and communication skills.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 3951 to 4000 of 6411)

Go to Search Parameters...

Brief Description

MBA, PMP Certified, PE(Texas), looking for a senior management position in a oil & gas company.

MSc(Microelectronics and Communications Engineering), BE(Electronics and Communication Engineering) and 2 years Experience as a Development Engineer

Objective: Looking forward to work with leading oil companies as a geologist, where I can use my skills and experience acquired while working with Schlumberger and knowledge gathered during my educational period.

Objective * For employment application in engineering and construction (Design, Planning or Site Engineer) disciplines in order to exploit the knowledge in Engineering.

Seeking a position as an executive with responsibilities for better performance, skills improvement and emphasis on environment for teamwork for company as well as personnel growth.

A Process Engineer with 2 years oil and gas experience covering appointments in operational support, offshore operation and engineering design. Demonstrates first-class academic results alongside strong problem solving and communication skills.

I am currently a Reservoir Engineer working for an engineering firm in Houston, Texas. I graduated from Petroleum Engineering at the University of Alberta in May 1999. Academic qualifications include a GPA of 7.75 out of 9.00 in the year of my graduation.

It is the summing up of what I have done in my career till today.

A qualified Engineering (Electronic Instrumentation & control) professional with core strength in the area of automation.

Chartered Staff Process Engineer with over 5 years experience covering North Sea Oil & Gas Production and UK Refining. Currently responsible for both short and long term process optimization for a Chevron Texaco Platform.

Dear Sir, APPLICATION: DRILLING ENGINEER EDUCATION LEVEL: UNIVERSITY DEGREE COURSE/ CERTIFICATE: BSC MECHANICAL ENGINEERING EXPERIENCE: MOBIL PRODUCING NIGERIA - DRILLING ENGINEER

Breakdown Quantity for Project Construction, Mining and Project Control specialist.

SCADA/Automation/Electrical and Controls Engineering Management

Chemical Enginering, Refineries, Process Eng., Production, Gas, & Quality Control

Science Chemistry graduate with total 18 years experience in petroleum field in Quality control & operations. Last 12 years in Gulf countries as Petroleum Inspector- Chemist Surveyor in Marine cargo inspection business.

I am skilled in an oiled servicing company and I hold an ND in electrical/electronics engineering.

As an experienced civil/Building engineering (more than twenty years) I am willing to participate in your construction projects.

Respected Sir > I am BTech in Chemical Engineer as well as Diploma in Petro-Chemical Technology. Having 2 + years of Gulf Sales experience in the Oilfield Industrial product& equipment

I have completed three years diploma in chemical . and now i work in pakistan oilfield as plnt operator last three years. and now i want join internationl level compane

Instrument Technician

Field Engineer, Strong Electrical Background

I Have 4 years of exp in design of diesel engine power train components in reputed R&D AVL Technical center,Having good knowledge in PRo-e,got 1 year special training in Graz Austria on engine design

December 2000 to 2003 Field technician in the field of power system protection. Power Industry.

B.E mechanical + piping in petrochemical /power plants + service of diesel engines + autoCAD

Certified Tester and a Bachelors Degree

Chemical Engineer with 08 Yrs Exp. in Operation/Technical Sevices/Project Execution-Erection,Commissioning and Start Up

Piping Designer

Knowledgeable in electrical technology 1&2, Three phase AC machine, Overhead line system, Electrical motor & controller, PLC, Power Supply Unit, Main Switch Board, AC Generator, Power Electronics, Electrical Sub Station,Fire Alarm System, High Voltage Underground Cable.

You can rest assured that I am mature, organized, self-motivated and possess good communication skills in my daily task activities

I consider myself responsible, available, an esaygoing person at the sometime i serius in job and my personality and i like to be sociable

service engineer with six years experience

SADRA Shipyard at Neka-Iran-Caspian Sea Manager of Planning of the Projects Work Schedule for the Khazar Semi Submersible Drilling Unit,(Project value: USD 300 million)&Oil tanker 4800dwt&Tug boat1200&4400hp&Sincro lift(Capacity3000t)&Oil storage tanks Capacity9000&6000m3)&Cutter Suction Dredger

I would like to apply with your organization for the position of an Offshore Telecommunications Specialist where I can use my extensive background and significant experience to help you obtain your company's mission.

Over 10 years of oil field production experience. With expertise in the following: supervision, operations, acidizing, fracturing, maintenance.

Engineering Professional with over four years experience in the oil and gas industry in reservoir development with expertise in the design, execution and evaluation of production projects

I have been working in this field for over 10 years now. Done work in both maintenance and construction in the past. In dealing with the Start-up/Commissioning of various projects, I have gained knowledge of Computer control systems, DCS, PLC, Pneumatics and dealing with customers one-on-one.

Background in OLGA modeling of subsea tiebacks and dry trees. Analyzed steady-state and transient multiphase flow fluids through wells and pipelines. Posses a good understanding of wax deposition and gas hydrates in flow lines.

OBJECTIVE I would like an opportunity with a world-class operation in which I could utilize my experience with advance technologies and modern production methods to achieve the profitability, quality and service goals of the organization.

I am a young, dynamic, confident result-oriented and self-motivated graduate of Chemical Engineering with two years of experience in the Oil and Gas industry.

engineering in dcs and plc system specialy YOKOGAWA CENYUM CS et CS3000 Prosafe PLC and APACS DCS of MOORE. GE MARK V and SUVIMAC II+

Over 5 years experience in Steel Structure

I got extreme training in Radiographic , Ultrasonic, MagneticParticle, and PenetrantTesting. I have 3 years of experience in Ultrasonic Testing Level II (UT).

Currently in Drafting and Design program @ ITT Tech. Over 10 years in QA & Document Data Control

All aspects of pipeline operations, surveying, vast array of computer knowledge

I quickly learn new concepts, am proficient at multi-tasking, work well under pressure, and communicate ideas clearly and effectively.

I hold MS degree in Environmental Eng and a BS degree in Civil Eng. I have hands on experience in implementing & leading ISO 14001 EMS, waste management, environmental audits, inspections, monitoring, risk assessments, EIAs, remediation studies, and for the last 6 years working in Oil & Gas industry

I'm mechanical engineer, I also have a mention in petroleum engineer, I did my practices in companies such as Repsol YPF, Pacifpetrol S.A, and I did visited Weatherford to get information for my thisis of degree.

Having Diploma(3 years) in Instrumentation Engineering with 8 years Exp. in Oil/Gas field (Offshore / Onshore) projects, commissioning, maintenance.

I have over thirty years experience working in the oil, gas & petrochemical industries on the maintenance, construction & commissioning of various rotating & mechanical equipment. The positions I have held have been hands on and supervisory, in both the UK and overseas, working onshore and offshore.

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 [ 80 ] 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out