Misco Jobs	|  Go to Job Seeker's Center »»   |
	«« previous resume Resume #25706 next resume »» CONTACT INFORMATION: View contact information... Position Applied For: Painting Inspector Cum Supervisor Latest Salary: Dh 6,500 Pm PROFESSIONAL / EDUCATIONAL QUALIFICATION CAREER 1) B. Com. Graduation 2) B Gas Course Done In Abu Dhabi. 3) Knowledge Of Computer Applications. TOTAL WORK EXPERIENCE (TECHNICAL / OPERATION): 1 5 Years Experience Working Experience In Detail As Below With Following Process Plant. 1) Presently Working With Ramsis Engineering In Ruwais, Abu Dhabi. Position Held: Painting Inspector Cum Supervisor Tenure Period: From 8/6/03 Till Date Responsibility: scope of work and responsibility includes the monitoring and implementation of all related painting/coating/lining works involved in the construction packages managed under co project department. This also includes the major painting works associated with the major overhauling of crude oil storage tanks in oil and gas co under control environment conditions with strict quality control and handover of the same to the area authority on the completion. Main duties also includes the supervision of all painting works carried out in compliance with co painting spec/manuals and also the quality control works as per the quality control plan, completing all necessary inspection requirements, inspection reports, daily logbook of work done and maintaining permanent records for each activity for the project work. Contribute with other construction engineers in the project so as to achieve smooth and safe implementation of the project works. 2)AHMED MANSOOR AL- A'ALI CO. BSC(c), Kingdom Of Bahrain. Position Held: Painting Supervisor Tenure Period: From 23/5/99 To 28/2/2003 The Project Job Involved In Kingdom Of Bahrain As Below 1) Supervision of painting of 12 Nos. Potable Water Storage Tanks for Ministry of Electricity and Water. 2) Supervision of painting works for upgradation of existing Fume Treatment Plant for the extension of Alba (Aluminium Bahrain). 3) Supervision of painting works for modernize instrumentation and control LSFO and FCCU complexes of Bapco (Bahrain Petroleum Company) 4) Supervision of painting works for Anode Baking Kiln-2 conversion project of Alba. 5) Supervision of painting works for Decommissioning of RJ1 Satellite communication Antenna of Batelco at Earth Station. 6) Painting works of Structural steel works for Hidd Power Plant Phase – 1 & II for Ministry of Works. 7) Maintenance of West Elevated Storage Tank (Internal) at West Riffa Blending Station. 8)Maintenance of Refinery Roundabout Elevated Storage Tank (External) 9) Blasting and Painting works of Roof structure for Silo-1 and Silo-2 for ALBA. 10) Maintenance of Elevated Storage Tank at Sanabis for Ministry of Electricity and Water. 3) CAPE EAST WLL., Doha-Qatar Position Held: Painting Foreman Tenure Period: From 17/3/1998 to 16/3/1999 Responsibility: supervision and painting work of heavy structural coating, tank lining and industrial blasting and painting of all fabricated heavy structures. Proper utilization of manpower as per the requirements at different sites. 4) NAM PREMATOR WLL, Hidd, Kingdom Of Bahrain. Position Held: Painting Foreman Tenure Period: From 16/8/1994 To 15/5/1997 Work Involved In Tank Blasting And Painting, Hull Blasting And Painting In Asry Shipyard Bahrain. View contact information... «« previous resume next resume »» Search Results (Resumes 4101 to 4150 of 6541) Go to Search Parameters... Brief Description Qualifications: Teesside University: 1st Year HNC Instruments, Cleveland College: BTEC National Cert Engineering, BTEC First Cert Engineering. Instrument , marketing , service, installation, sales, suppoet Production engineer, with strong knowledge in Rod Pumping, ESP, Gas Lift and softs related. Also production and inyection follow-up, project evaluation. Additionally experience in managment and operation. Automation engineer with 7 years of international experience in PLC/HMI Creating the Spool drawings for fabrication purpose using the Spoolgen Software.Input Files Taken from PDS, the Output is generated in Microstation,Checking the Generated Drawings & Documentation preparation. Civil Engineer. Developing the 40 + retail outlet fro IOCL.IBP, Essar Oil in India. Application Manager - Control Valves and Engineered Products Project Engineering & Management Near 13 years of professional work experience in the oil and gas industry, working experience on the on/off shore in Iran and extensive experience in oil and gas unit processing, reservoir engineering and well completion engineering. 3 Years Diploma in Mechanical Engineering with 11 years experience in valve Engineering i.e. Sizing, Selection, Maintenance, Repair and Implementation of all types of industrial valves. I am doing job in wireline logging in H L S Asia Ltd in India on the post of an operator. I am doing independent cased hole and open hole jobs on onshore and offshore and driving LMV and HMV. A wide on-offshore range of experience in heavy equipment maintenance. Managing and supervising day-to-day preventive maintenance (P.M.) using a computerised maintenance management system. (C.M.M.S.) Modify equipment and machinery using management of change documentation (M.O.C.) to improve rel Experienced in Construction of Offshore/Onshore Oil &Gas plants in the field of Fabrication, Installation, Hydrotesting & Pre-commissioning of In-plant/Well Head Piping and cross Country Pipe Line. Qualification: Bachelor of Engineering (Mechanical) Petroleum Engineer having work experice for five years with a gians multinationals lioke Halliburton & Schlumberger in Reservoir & Production Engineering Areas Experienced Senior Electricial Technician in oil refinery. Familiar with maintenance motors, transformers, generators and protection for the sames, frequency converters, power regulators, installing and programming PLCs etc. Chemical Engineering / Chemistry graduate from the University of Minnesota Mechanical engineer-Masters-2 years experience as research assistant-proficient in development and usage of Finite element codes and packages-actively looking for a job. The purpose of this resume is to define and highlights the skills and ability to work as a Planning Engineer. I secures 5 year of working exp. as Maint. Planning Engineer and Proj. Plan Engr. in Petroleum Refinery and for the const. of Pet.chem. & Steel Plant respectively. B.S. CHEMICAL ENGINEERING UNIVERSIDAD METROPOLITANA, Caracas – Venezuela • Minor: “Oil/Gas & Petrochemicals, Production Engineering” • Graduation Date: February 2002 • GPA: 3.55 / 5.00 N°10 in 21 graduates. • Excellent interpersonal skills • Excellent leadership abilities • Thorough individual with good analytical skills • MS Power Point presentation skills • 4 years experience spanning academia and industry Degrees in BSc(GEOLOGY) and BCom(FINANCE). Experience in E&P companies undertaking economic modelling, reservoir performance and completions, and development geology. Bachelor of engineering degree in metallurgical and materials engineering (b.eng). grade: second class upper division. Engineering background consisting of manufacturing, project organization, and design disciplines. Experience with factory and marine environments, office and fieldwork, and ability to interface with a variety of people. A Chemical / Process Engineer Over 5 years of experience in petroleum industry, including, but not limited to various aspects of management and monitoring of the oil fields, wide usage of environmental engineering, performing general overall supervision, conducting communication with vendors and consultants. An engineering position with potential for professional growth and advancement. Mechanical Field Engineer; 5 years experience; Industries: Construction, Oilfield Services & Transportation; Areas of Interest: R&D, Field Engineer, Project Management Chemical/process engineer Seeking a long-term position in the field of Information Technology or Consulting where I can learn and grow in a fast paced and rewarding environment. Working Experience with CADCENTERS PDMS and INTERGRAPHS PDS-3D in various aspects of Basic and Detail Engineering including Project Planning and Implementation right from Development of Plot Plan, Equipment Layout, Piping Layout, to Isometrics, Design Review and Material Take off. I am now looking to apply my many skills in a pipe drafting position. And along with my drafting and field experience I am confident that my newly obtained skills in assisting fabrication coordination of this project will be of great use in the design phase of all future projects. AutoCAD Site Safety I'm a reservoir engineer working for rashpetco(JV.of BG&EGPC)for the following topics:runing eclipse 100 simulation,kappa saphir wt analysis,prosper nodal analsis,mbal(MB software),gap(netwark),floviz,reservoir coupling,office,pvti,schudule,pss,petrel ,controlling the multi segmented wells I am Engineer, MBA, Speak 4 languages, Excellent Computer Knowledge, I have done several courses in the Petroleum Industry. I've worked in a Shell Petroleum Refinery in the Engineering Area, Inspection, Maintenance, and Projects. Also in Economy of the Refinery working on the MIS and KPIs. I am a Petroleum Engineer that possesses technical expertise in petroleum economics evaluation, and reservoir engineering analysis with some reserves booking experience. In addition, I am very eloquent with Microsoft's office software and all windows environments. Cuban Petroleum Engineer looking for work. As a Manager/Project Manager, I have over 12 years of experience managing various design build projects and services business in OEM, Pipeline and Water treatment industry Executes design preparation and construction drawings of piping system and supports and pipeline design. Background demonstrates intensive exposure in conceptual design and studies, detailed designs, cadd drafting, isometric and general plan reviews, & MTO Solid management experience in professional Procurement (purchasing, quality control and logistics) Moniitoring and implementation of all related painting/coating/lining works involved in the construction packages managed under co project department.this also includes the major painting works associated with the major overhauling of crude oil storage tanks in oil and gas co under control environm I am a chemical engineer with 15 year experienced in oil, gas processing and petrochemical plants (Polyethylene-LLDPE/HDPE/LDPE). Extensive experience in gas separation, purification, refrigeration, all type of compressors. Day to day activities of production plant and catalyst manufacturing. 7 years experience in the oil filed, (Mudlogger, Data engineer and a pressure engineer) The past 16 years has been in the Oil & Gas and Mine Industry, with the reminder being associated with the Onshore – Offshore Oil & Gas Plant industry. Experience has been gained in all aspects of Engineering Piping Design & drafting activities with the emphasize on piping plan, isometric, pipe spoo Ten Years Of Effective Managerial/Sales Experience At The Professional Level I am in a position to take full and independent charge of major plant overhauls related to boiler and its auxiliaries, intake equipment, fuel gas station and fuel oil handling station Electrical Technician/Cell Phone Technician Project Management Electrical Engineer - Design and Estimation Oil and Gas Drilling Professional First   Prev   51   52   53   54   55   56   57   58   59   60   61   62   63   64   65   66   67   68   69   70   71   72   73   74   75   76   77   78   79   80   81   82   [ 83 ]   84   85   86   87   88   89   90   91   92   93   94   95   96   97   98   99   100   Next   Last Seach Parameters Change search parameters... CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas; Change search parameters... Keywords: (e.g. mining engineer) Find results with: ANY of the words ALL of the words WITHOUT the words Save this search parameters... Post job with this search parameters... Frequently Asked Questions What's the most effective way to perform a search? Go to Advanced Search 1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results. 2. Enter one or two of the most important keywords. Click 'Search' and look through results. 3. To search within results add more keywords. How can I find resumes that contain specific exact phrase? To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD". More Frequenly Asked Questions...
Employer's Center » Employers Home » Feedback » Help » Post Jobs » Edit/Delete Jobs » Search Resumes » Resumes By Email » My Account » Log In » Log Out
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com