Resume - A Mechanical Engineering PhD graduate seeking engineering and research work as a...

Misco Jobs

Resume #2577

CONTACT INFORMATION:
View contact information...

Nationality: Malaysian

PERSONAL PROFILE

Seeking engineering and research work as a Mechanical Engineer preferably specialising in the area of condition monitoring, maintenance engineering, failure analysis and prediction, remote / on-line sensing technology and material properties tests and evaluations. A quick learner and a confident team member with good inter cultural communication, organisational and interdisciplinary skills. Accommodating, extrovert, adaptable and adventurous person.

EDUCATIONAL BACKGROUND

1999 - Present University of Southampton, United Kingdom
PhD Mechanical Engineering (Expect to finish May 2003)
PhD research project entitled 'Influence of Debris formation on electrostatic charge generation within tribocontacts' sponsored by the United States Navy (Office of Naval Research) and Smiths Aerospace. The University of Southampton has used electrostatic sensors to successfully detect precursor signals prior to significant adhesive wear failure of oil-lubricated contacts. The charge measured is thought to relate to lubricant degradation, surface charging and debris formation. This PhD research project aims to establish the charge levels and mechanisms associated with wear debris formation in oil lubricated contacts. The overall objective is to establish the degree of contributions of wear debris of different materials and morphologies to charge detected within a lubricated contact as well as downstream. The main application of this research is the remote real time / online condition monitoring of oil-lubricated mechanical systems. Main skills gained include:

* Real time / on line data acquisition, analysis and processing,
* Remote sensors design and development,
* Material tribological wear testing,
* Project management, technical writing and presentation

1997 - 1999 University of Salford, United Kingdom
BEng Mechanical Engineering (Second Class Upper 2:1)
Final year project was an experimental project entitled 'The Effects of Salt Contamination in Grease on the Wear of Bearings'.

1996-97 Centre of Preparatory Studies/ITM, Shah Alam, Malaysia
First Year of BEng Mechanical Engineering Degree course

1994-96 MARA Science College, Kuala Lumpur, Malaysia
Advanced Levels (A Levels) - Mathematics, Physics, Chemistry
International English Language Testing System (IELTS) - Band 7.5

WORK EXPERIENCE

Oct. 1999 - Present Fluid Mechanics Tutor & Lab Instructor for Undergraduate
Part time job during PhD research studies. The work involves tutoring Fluid Mechanics to first and second year undergraduate students. It also involves instructing and supervising laboratory experiments and supervising three undergraduate final year project students.

June 1999-Sept 1999 Cost Estimator - Forest City Signs, Altrincham, Manchester
Summer Job. Estimator of the material, assembly and labour cost for road signs and traffic products.

January-June 1999 Food Counter Assistant - Selfridges & Co., Manchester, England
Part time job during term time. Customer services as well as cashing job.

June-Sept 1998 Credit Controller - Herbody Limited, Cheshire, England
Summer job. General accounts auditing, debt recovery and some customer relations.

June-Sept 1996 Temporary Teacher - Malaysian Ministry of Education, Malaysia
Summer job. Teaching Year Two (14 year olds) secondary school students Science and Mathematics.

ADDITIONAL SKILLS

* Standard software - Microsoft Office, WordPerfect, Microcal Origin and Windows operating systems.
* Engineering software – Matlab, AutoCAD, Coulomb Finite & Boundary Element Electric Field Modelling and ANSYS Finite Element Analysis. Turbo Pascal, Data Acquisition softwares
* Surface analysis tools - Scanning Electron Microscope (SEM), EDX Analysis, Surface Profilometry.
* Various types of standard mechanical wear and material mechanical properties testing.

PROFESSIONAL COURSES

* 'An introduction to the processing and analysis of vibration data', University of Southampton, Institute of Sound and Vibrational Research, 17-19 January 2000.
* 'Electron Microscopy and Analysis' University of Southampton Electron Microscopy Centre, 2000.

AWARDS RECEIVED

1999 - Present - University of Southampton PhD Scholarship
1993 - Malaysian Public Services Department (JPA) Undergraduate Overseas Study Sponsorship, School Society Chairman of The Year
1992 - Sarawak State Government Academic Excellence Award
1989 & 1991, 1990 - Best Student and Runner up Best Student respectively

INTEREST & EXTRA-CURRICULLAR ACTIVITIES

Interest: Traveling - has traveled extensively in Europe, North America, Asia and Australasia. Amateur photography in architecture and landscape with intermediate skills. Outdoor activities and social events.

Sports: Cycling, wall/rock climbing, squash and badminton.
Past achievements: Research Group Secretary (2000-2003), School Chairman of the Scout society and School Prefect for two years. Biggest achievement was leading the Scout team to win the inter-school marching and gadget building competition and participating in the National Jamboree in 1993 and 1992 respectively. Committee member of various organisations and clubs.

RECENT PUBLICATIONS

* S. Morris, R.J.K. Wood, T.J. Harvey, H.E.G. Powrie, Electrostatic Charge Monitoring of Unlubricated Sliding Wear of a Bearing Steel, In print for Wear Journal.

* S. Morris, R.J.K. Wood, T.J. Harvey, H.E.G. Powrie, Real Time Monitoring of Wear Debris Using Electrostatic Sensing Techniques, Proceedings of The Institute of Mechanical Engineers Mission of Tribology Research 11, London, Dec 2002.

* S. Morris, R.J.K. Wood, T.J. Harvey, H.E.G. Powrie, 'Use of Electrostatic Charge Monitoring for Early Detection of Adhesive Wear in Oil Lubricated Contacts', Journal of Tribology, April 2002 Vol. 124, Issue 2, pp. 288-296. (Presented in the 2001 ASME/STLE Joint Tribology Conf. San Francisco).

* S. Morris, 'Influence of Debris Formation on Electrostatic Charge Generation Within Tribocontacts', MPhil/PhD transfer thesis, RJW/SM/01/01/338, School of Eng. Sciences, University of Southampton.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2351 to 2400 of 7051)

Go to Search Parameters...

Brief Description

Company representative on sales negotiations and jobs. Coil Tubing Operator on OTIS coil tubing unit. Heavy equipment maintenance, boilers, pumps, compressors, and turbines.

I am interested in exploring the possibility of Employment through your Organization. My background includes substantial Experience of 5 Years as Mud Engineer in MB Petroleum Services LLC - Muscat, Oman, Saudi Arabia, Mozambique and India.

Solid knowledge of Microsoft Office Suite, CoralDraw, Foltran, Qbasic, Visual Fox Pro and Mathcad, Autocad, Staad Pro, Sap 2000, Advanced knowledge of VISUAL BASIC applications for EXCEL, ACCES, WORD, POWER POINT, AutoCAD and STAAD PRO, electronic mail and Internet.

Fifteen years of experience in piping construction and piping engineering activities related to projects for oil production facilities, oil refining and industrial plants.

B.Eng in Chemical Engineering; Diploma in Mud (Drilling Fluids) Engineering.

Diploma in Mechanical Engineering, Diploma in Industrial Safety from Central Labour Institute- Mumbai, H2S Awareness & Rescue Operation, Safe Journey Management, Road Safety Management, Job Hazard Analysis, Permit to Work System, Gas Testing, Incident investigation & Accident reporting.

I have worked for multinational and International companies in the Middle East like General Dynamics, Babcock & Wilcox, and Delta Corporation. I look for a job as QA/QC Engineer/Specialist or Plant Manager.

I have 15+ years experience as an Instrumentation & Control Systems Design Engineer along with seven years I&C construction and commissioning experience at locations throughout the globe.

I have varied experience earned through honest means in Chemical, Oil & Gas, Petrochemical , Water treatment and other related areas by hard work, sincerity, dedication, team spirit and conviction.

A Mechanical Engineering PhD graduate seeking engineering and research work as a Mechanical Engineer.

•Ability to solve petroleum production problems involving design of petroleum production facilities •Engineering and project management experience in the oil industry •Strong planning, communication and presentation software skills

15 years experienced Mud engineer. Drilling fluids design, testing and well site engineering. Solids control equipment management

Drilling Engineer with 12 years of experience in drilling and workover supervision, including 2 years of well construction planning. Also 1 year of work as a Safety Engineer.

Electric Technical Officer (ETO)

I have over 11-year field exploitation and G&G Modeling and reservoir simulation experince and extensive competency in reservoir management, economic evaluation, reserve estimating and booking, risk analysis, welltest interpretation, well perfomance analysis and stimulations.

Slick Line Expert.

Ability to design & detail automation for DCS systems and other interfaces.

Mechanical Engineer,University Politehnica Bucharest

Technical and Application Engineering Support for the new concepts being introduced and promoted.

Having +10 years of Gas Processing, Fertilizer & Petrochemical Plants operational and supervisory experience.

Over 8 years experience as a piping team member and leader involved in oil, gas and petrochemical plants. Participated with famous European companies (Foster wheeler, Lurgi, Davy Process Technology, AKPG Kvaerner) as the main contractor, sub contractor or consortium member

Having a good experience in Export Business, Purchasing, Design, Material Planning, and Scheduling. An executive with experience in Business Development, Negotiations, Operations, Planning and Scheduling with a solid perspective of organizational priorities, potential and limitations.

Mechanical Engineer with 4.5 yrs experience in Oil & Gas Industry

Masters in Industrial Chemistry , Master¡¦s Thesis -Oil well Cementing and Fluid loss admixtures for better fluid loss control and zonal isolation in oil wells. High Temperature High Pressure Filtration Cell, Consistometer, DLS, Zeta potential, TOC, GC, HPLC, Rheology, Spectrophotometers.

Wonderware Integration Expert & also In Sap xMII

Petroleum Engineer with experience in ESP & PCP installation, Well testing, Workover & Completion

My skills among others include good use of tools and ability to troubleshoot

Piping Design Stress Analysis Engineer

Calibration of Instruments,online routine and corrective maintenance,troubleshooting, field calibration, calibration in workshop, commissioning, precommissioning

Planner with primavera 3.1

Instrument engineer

Sr Rotating Equipment Engineer

Structural PDMS Designer

20 years experience in Production/Operations onshore and offshore. Ex Marine Engineer officer.

Process Engineer (Chemical Engineering)

I HAVE +10 YRS EXP IN A PETROLEUM LABORATORY OF OIL REFINERY IN INDIA,HAVE KNOWLEDGE OF TESTING ALL PETROLEUM PRODUCTS.

To seek holistic and enriching exposure in the field of technology and management with an organisation that is dedicated to say in the forefort of excellence.

I have over twenty years of experience, comprising of mechanical, piping and HVAC design, project management, construction supervision, mechanical systems startup and commissioning and board /computer drafting including PDMS, Intergraph ISDP 3D, AutoCAD and FLEX CAD on various marine, offshore pet

Pursue a career in the, Chillers Systems, Refrigeration, Air conditioning,

Proven professional experience in Manufacturing Processes in Ethylene, Ethylene Oxide, EthyleneGlycol and Ethylene Benzene, Process Design and Optimization. Experience with process control objectives to optimize unit operations.

I have degree in Civil engineering and 6 years experience with Oil & Gas Industry(Kuwait,Qatar,U.A.E,Georgia).I have valid driving licence of Qatar/U.A.E/Oman.Execution of Pipe rack foundations,Static/Rotary euipment foundations,Turbine,Boiler,Flare foundations, Control bldg and Sub station bldg.

• Over 15 years of experience in Petrophysics (Exploitation and Reservoir characterization)in clastic and complex carbonate reservoirs. • Detailed experience of acquisition, quality control, interpretation and evaluation of petrophysical (wireline, LWD and core) data.

Seeking a challenging and rewarding Chemical Engineering position with a progressive company.

handle the Project Independently, Installation Instruments* Loop Checking* Site Design *F&G System *Pre Commissioning Activities Erection of DCS,PLC *Knowledge of Analyzer System *Experienced in Senior levels *Good Leadership quality *Good interpersonal relationship

Electrical Engineer with experience in system design and maintenance planning of electrical facilities including motors, motor starters, switchgears, power distribution, and cabling.

pipelines engineer, mechanical engineer

I am presently working as a field service representative for Ecolochem International,Inc. Presently assign in an Onshore Gas Plant for Shell Exploration Philippines. I work also as a assistant driller for Sedco Forex Sclumberger.

I am a Mechanical Engineer with Master degree in Mechanical Engineering,

Objective Secure employment in the petroleum industry working in reservoir exploitation, well planning, and/or completion operations.

German R. Leal Mechanical engineer with 15 years industrial experience in Petrochemical and Oil Plants. HRSG Boiler/Plant. Piping Engineering and Design (PI&D), Flow Sheet, Plot Plan. ASME B31.1;3, 5,8, 11 ASME BPV Sect VIII. Stress Analysis CAEPIPE, Auto Pipe.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 [ 48 ] 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out