Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #26232 next resume »»
CONTACT INFORMATION:
View contact information...

PROFESSIONAL EXPERIENCE

Qatar Petroleum, Doha, State of Qatar (Arabian Gulf) 09/99 – Present

Lead Mechanical Engineer 05/01 – Present
Additional LPG Tanks and Associated Facilities Project

This project involves the design, engineering and site fabrication of 3 x 100,000 m³ LPG (propane) tanks and associated refrigeration facilities at Mesaieed Industrial City, Qatar. The second phase consists of the conversion of existing 2 x 58,000 m³ propane storage tanks to butane service. Overall contract value is US$ 150M. Managed and directly participated in the execution of all mechanical engineering aspects of this project from front end engineering design (FEED) through to detailed engineering, construction and commissioning (EPC). Coordinated consultant and contractor screening, capability analysis and selection. Supervised review and approval of specifications, basis of design, equipment bid evaluations, shop & field acceptance tests, layouts and connecting to existing facilities. This new facility has been successfully commissioned in early 2005. The conversion phase of this project is in progress.

Senior Plant Engineer (on several multidisciplinary projects) 09/99 – 04/01

Managed the concept definition phase of projects and overall project development, including production of execution plans, designs, procurement strategies and construction criteria. Responsibilities include management of the conceptual, preliminary and detailed designs of facilities based on approved Statement of Requirements (SOR). Additionally development of Scope of Work (SOW), specifications and basis of design for engineering consultancy (FEED) and construction tender packages (EPC). Coordination of tender bid evaluation and making recommendations for contract award to the Qatar Petroleum Major Tender Committee.

Coordinated the development of corporate engineering standards, procedures, engineering, and specifications. Mentored young Qatari engineers during their development towards target senior management positions.

The following are some key projects:
* Additional Slots at Khatiya North & Main to Connect New Oil Production Wells (US$ 6.9M)
* North Field Injection Station Flare Upgrade (US$ 4.3M)
* Spare Boil Off Gas Compressors for existing Propane and Butane Tanks (US$ 3.0M)
* Fuel Gas supply pipeline for Qatar National Cement Factories (US$ 1.1M)
* Consulting Package for Installation of Main Oil Loading Pumps at Fahahil (US$ 0.4M)

Coastal Aruba Refining (ex-EXXON Refinery), Aruba, Dutch Antilles 11/90 – 08/99
Turn Around Head of Engineering 6/97 – 6/99
Organised and managed a multidisciplinary team of 36 engineers, designers and inspectors to work on pre-turnaround and turnaround project activities in the refinery. The team was responsible for approximately 50 capital projects implemented during two major refinery shutdown. The pre-turnaround and turnaround activities included recruitment, training and indoctrination of additional personnel. Also, responsible for manpower management, design, document approvals, project specification, scope of work, material specification, detail engineering, material take offs (MTO) and tie-ins for several projects (approximately $45 million). Additionally, provide technical support on design and resolved technical matters during detailed engineering, procurement, fabrication, testing, installation and plant commissioning.

Lead Project Mechanical Engineer 6/93 – 5/97

Managed a multidisciplinary team of 12 engineers, designers and administrative staff responsible for financial evaluations, design, detail engineering, specifications, MTO, execution criteria, contracting, procurement, installation and commissioning of several. Coordinated, moreover, planning, progress reporting and cost control of several projects. Mentored junior, moreover, engineers as they developed into productive co-workers.

Senior Mechanical Engineer 11/90 – 5/93

Responsible for troubleshooting, repairing, modifying, specifying, selecting, installing, testing and commissioning of rotating equipment including heavy-duty compressors, pumps, blowers, and large electrical motors. Supervised, furthermore, design, repairs and modifications of heat exchangers, pressure vessels, furnaces, boilers and piping.

Refineria ISLA S.A. (ex-SHELL), Curaçao, Netherlands Antilles 08/85 –10/90
Senior Rotating Equipment Engineer

Responsible for condition monitoring, fault diagnosis, predictive maintenance and repair advise on rotating equipment systems. Managed, moreover, specification, selection, installation, testing and commissioning of rotating equipment such as heavy-duty compressors, pumps, blowers, and large electrical motors. Managed, furthermore, a team of 3 technicians responsible for rotating equipment vibration data collections.

Lago Oil (EXXON Refinery), Aruba, Dutch Antilles 08/82 – 07/85
Mechanical Engineer

Supervised selection, engineering, design, repairs, modifications of heat exchangers, pressure vessels and piping. Coordinated financial evaluations, design, engineering, specifications, contracting, procurement, installation and commissioning of small projects (less then $500,000).

OTHER KEY ACCOMPLISHMENTS

* Acted as manager for Maintenance (300 staff) and Project Engineering & Construction (30 staff) departments.
* Managed a fast-track project to replace two package boilers (150,000 T/D) and combustion systems. (approximate budget US$ 12M).
* Coordinated the project to increase the crude furnace tubes service life under high naphthenic acid operating conditions. Activities included upgrade of convection tubes, radiant tubes, cross-over piping and outlet piping (approximate budget US$ 7M).
* Supervised engineering, procurement and installation of internals of several fractionation towers internals within tight schedule (approximate budget US$ 5M).
* Lead the specification, selection, installation, testing and commissioning of two 2,500 BHP multistage refinery Vacuum Bottom Residue pumps (approximate budget US$ 4M).
* Implemented a mechanical seal standardisation and modification program reducing inventory costs and pumps leakage by 50% (approximate budget US$ 2.5M).
* Coordinated engineering, specification, rebuilding, modification, installation, commissioning and start-up of 3,000 BHP reciprocating compressor to maximise compression of 1000 psig hydrogen without exceeding the crankshaft, main bearings, synchronous motor and piston rod load limits (approximate budget US$ 2M).
* Developed and managed the metallurgical upgrade of two 12 MW turbo generator main steam condenser units. The original main condenser was failing prematurely (within one year) due to changes in the cooling water condition. This tube, tubesheet and channel material upgrade, increased the equipment run time from one year to over four years (approximate budget US$ 1.5M).
* Supervised the, selection and installation of T-28 John Crane dry mechanical seals at two refrigeration propane centrifugal compressors to replace existing oil film seals (approximate budget US$ 1M).
* Managed re-design of bottoms pumps impeller and casing modifications to reduce power consumption while increasing capacity.
* Implemented preventive and predictive maintenance program for rotating equipment, reducing equipment Mean Time Between Failure (MTBF) by 100%.

COMPUTER SKILLS
Literate with basic Microsoft applications and Competent in using the underlisted engineering software in a design environment.

* Scheduling Software: Project Manager, On Target.
* MS Office including Word, Excel, Access, PowerPoint and Outlook
* CEASAR II by COADE – Piping Stress Analysis Program.
* PVElite by COADE - Pressure Vessel Design and Analysis Software.
* PIPEPHASE by Simsci – Process System Design and Analysis.
* TANK by COADE – Tank Design and Analysis.

LANGUAGES SKILLS
Writes and speaks English fluently. Also, competent in both written and spoken Dutch and Spanish.

EDUCATION
MBA in General Management1 (Brunel University, United Kingdom, 1997)
M.S. in Rotating Equipment Engineering (University of Simon Bolivar, Venezuela, 1990)
B.S. in Mechanical Engineering (University of Tulsa, U.S.A.,1982)

PROFESSIONAL AFFILIATION
* ASME - Member-American Society of Mechanical Engineers

View contact information...
«« previous resume next resume »»
Search Results (Resumes 751 to 800 of 7051)Go to Search Parameters...
Brief Description
25 years of professional experience in the Front-end and Detailed Design and Engineering, Projects Engineering, PMC, Factory & Site Acceptance Testing, Supervision of Installation, Testing and Commissioning of state-of-art DCS, SCADA, Safety Shutdown and F&G Systems and field instrumentation
TQM facilitator & instructor /Lead teams to resolve to improve process/ 4 yrs offshore Maintenance Supervisor /2yrs manager offshores field/ 4yrs CMSM coordinator/6 yrs contol management stocks
Contracts Int. Experience in Construction, Management and Administration (EPC), Materials Manager (PMC), Materials Control, Procurement & Expeditor; Fluent in English, conversational in French, Russian. Seeking to continue professional career effectively utilizing my skills and gained experience.
More than(18) years in piping design & construction. Specialize in stress analysis of piping system using Caesar 11. Worked in oil refineries, onshore & offshore, gas plant & petrochemicals e.g. Saudi Aramco & Saudi Basic Petrochemicals ,Petromin Shell & Jeddah Oil Refinery.
More than 10 years’ experience of coordinating structural projects and technology development acquired during the Master and Doctor Courses in Civil Engineering and working as engineer in construction, aerospace, offshore and onshore industries.
Working as a Rotating Machinery Specialist with specialist skills in machinery Componenant condition monitoring by Vibration analysis (CSI RBMware), Bentley Nevada DM2000 online monitoring system, Adre data collection, Flexware performance analysis, Ultrasonic check by CSI sonic scan and etc.
Lead Process Engineer for Oil& gas Offshore/Onshore projects for Conceptual, Basic /FEED and Detail Engineering, Optimization and De-bottlenecking
I have a total of 13 years of experience working as an Engineer in the Petroleum Industry. For the last 10 years I have been working as a Process Engineer handling all aspects from Conceptual Engineering through to the Detailed Engineering Phase. I am seeking work as a Senior Process Engineer.
Involved in commissioning and pre-commissioning activities.
To secure a long/short-term contract, or permanent position. In Construction, Maintenance, Commissioning etc. My current position is as an Electrical/Instrument Engineer (as to the above position I am negotiable).
Fourteen years of combined experience in petroleum engineering and G&G (U.S. & international.) Experience includes integrated 3D reservoir modeling, numerical simulation, reserves assessment, field development, and reservoir studies.
„Ï A thorough understanding of risk engineering and Health Safety and Environmental (HSE) management systems in petrochemical, chemical, oil & gas industries, gained in a consulting environment. „Ï Consulting experience related to Process Safety Management & Fire Audit, Dust Explosion
Chemical Engineer, P.E. Petrochemical Design Background Experience
Rotating equipment / mechanical maintenance technician / Commissioning technician
Structural Designer
diploma in mech.eng, NVQ-level -3
Twenty five years in the Oil and Gas industry all of which was in the discipline of Project Services and Controls, providing leadership in Estimating, Cost Control, Planning, Scheduling, Contract Administration services. In-depth exposure in Heavy Oil, Natural Gas, Petro-Chemical, Compressor Package
PETROLEUM GEOLOGIST with experience in exploration, development, acquisitions, divestitures, and operations. Experienced in clastic, carbonate and salt environments. Available to travel for either permanent or contract work.
Suitable to work in process/operation area as technician (field & panel op) supintendent, etc.
Over 23 years experience in engineering and project management in Oil & Gas, refining, and petrochemical environment. Extensive knowledge in particular aspects of project engineering, mechanical and maintenance engineering. Key engineering competences include procurement of major capital equipment.
Over twenty-five years of work experience in the Oil, Gas and Petro - Chemical Industry,
Over 24 years global experience in reservoir development and management of oil and gas condensate fields.
Snr Project Engineer with Lead Process Engr / Manager and multidiscipline experience over 20 years in major international oil / gas & petrochem projects with leading Engineering and Operators in Europe ,US, Africa (Nigeria) and Mid East.
Petroleum Engineer with over 30 years of experince in oil and gas fields operation and maintnanace, including design and construction of surface facilites(Pipeline)
QA/QC ENGINEER
20 years of experience in the field of computer s/w and h/w
Trade and degree qualified welding engineer and m,etallurgist with 25+ years experience in petrochem, power, onshore rig contruction and computerised welding documentation management.
Technical / Lead Safety Engineer
NDT inspector LVL II
11 years experience in offshore construction, field engineering, planning, offshore and onshore project scheduling, field supervision for installation of offshore platforms pipelines spools, pigging and hydrotesting. Preparation of installation procedures, rigging calculations, material procurement
Degree in Petroleum and Natural Gas Engineering. New Mexico Institute of Mining & Technology (NMT), Socorro NM.
Core business is scaffolding; Consulting, controlling, supports, execution business. in Oil & Gas industry and construction industry
Nearly 15 Years QA/QC composite Experince in Electrical Manufacturing as well as Construction of Oil & Gas Central Processing Platform
ASQ Certified Quality Technician with over 8 years Experience in the development and implementation of Quality plans and manufacturing procedures used in the Petroleum and natural industries for Rotary drilling equipments. Regulatory compliance, QA/QC, NDE, Material testing and Inspection
A highly motivated professional with 10+ years of diverse hands-on experience in conceptual process design, technical services and developing/upgrading of upstream oil processing facilities. Worked on petrochemical projects, oil sands technologies and water/wastewater treatment plants from front end
Piping Designer with 12+ years of experience in piping design & detail engineering involving Equipment layouts, Piping layouts, Piping isometrics, Tie-in Schedule and Pipe supports for Onshore & Offshore Oil & Gas, Power and Petrochemical Plants. Have good knowledge of all national & international c
Current Position as Air Separation Unit Technical and Process Specialist for Petronas Gas Berhad with previous experience with Air Products Chemical Incorporated and Messer Griesham. Some college from Texas Tech University, Lubbock, Texas USA.
Process Engineer Resume Oil and gas
Piping Field Engineer – Technical Office
14 years experience in welding technology ,Have extensive experience in welding(SMAW ,GMAW,FCAW ,SAW,TIG etc) of CS ,Alloy Steel ,C-Mn steel , and SS , DUPLEX STAINLESS STEEL , CU ¡VNI , NI ALLOY AND OTHER CORROSION RESISTANCE MATERIAL
PETROLEUM ENGINEER WITH 11 YEARS OF INTERNATIONAL EXPERIENCE
Level 2 UT EN473, RSO, Previous Level III PT,MT,RT. Advanced inspection in Phased Array and TOFD - Good computer skills
civil/structural engineer/manager
19 years Project/Turnaround Planning, 2 years in EP Maintenance Planning experience in O&G offshore & onshore; at senior capacity. Well versed in Planning software e.g. MS Project, Artemis & working knowledge of Primevera. Excellent in MS Office tools & MS Access.
I have worked in the Oilfield for over 16 years. Where by I have gained valuable experience in all down hole tool applications as quoted below. I have managed bases in different countries, and trained people from all walks of life. I enjoy my profession.
Chemical Engineer with Professional skills in Sea Water Desalination, Drink Water Production, Waste Water Treatment, Steam Production, Nitrogen Gas Production, Sulphuric Acid Production, Electrolysis – NaOH, Cl2, HCl Production
Skill gained over eighteen (18) years of experience on all aspects of Rotating Machinery and static equipment for onshore and offshore applications including specification and selection, contract technical evaluation, execution of modification and minor changes, design approval, witness testing, ins
Position leading to a career in Environmental Management/Planning with an International Oil Company or a recognized International Consulting Firm.
SUMMARY Exploration and appraisal geosciences professional with extensive background in domestic and international prospect evaluation and reservoir characterization. An accomplished, resourceful, and versatile oil finder with strong communication and interpersonal skills.
More than 20 years as a Petroleum/Reservoir Engineer in Exploration and Production Company with heavy emphasis on reservoir management: India (Oil and Natural Gas Corporation Ltd.), Kuwait (Kuwait Oil Company), Abu Dhabi (Zakum Development Company) and Oman (PDO-Shell).
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   [ 16 ]   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com