Resume - More than 13 years experience in design and operations. Knowledgable in Process ...

Misco Jobs

Resume #26362

CONTACT INFORMATION:
View contact information...

More than 13 years experience in the field of process design and plant operation. Conceptualisation and preparation of process scheme, feasibility study and detailed project reports. Preparation of Process Flow Diagrams, Piping and Instrumentation Diagrams, Line list, equipment data sheets. Technical bid evaluations and selection of process equipment and vendor packages. Hydraulic simulations heat and mass balance and equipment sizing calculations, HAZOP reviews and implementation, preparation of Operating Manual. Experienced in various plant controls and operations. Knowledgeable in process engineering software such as HYSYS, PIPESIM, PIPEPHASE, PIPENET and other spreadsheet calculations for equipment and pipe line sizing. Preparation of bid packages and manhour estimates.

MARCH 2002 - DATE TECHNIP
Doha – Qatar

SR. PROCESS ENGINEER

2005 QATAR PETROELUM
Involved in the detailed design of the new control building in Halul mainly for the utilities required inside and outside the new control building.
Prepared loss prevention documents such as hazardous area classification drawings, safety layouts, escape routes and project specific fire and safety philosophy.

2005 QATAR PETROCHEMICAL COMPANY (QAPCO)
Trouble shooting of the compressor knock out drums liquid carry over in the compression section of the ethylene plant.
Scope covers the preparation of study report identifying the possible causes of the carry over and fouling as well as recommending possible solutions.

2004 TOTAL E&P QATAR
Design of a dedicated firewater/deluge system for TOTAL E&P facilities in Halul Island (Flare Knock Out Drum deluge system)
Pipenet simulations to determine number of spray nozzles and required and nozzles configurations as well as firewater demand calculations
Preparation of data sheets for deluge valve skid and spray nozzles
Preparation of Simulation Report
FEED study on installation of new closed drain drum in Halul island
Preparation of study report, PFDs, P & IDs
Closed drain drum sizing and line sizing

2003 - 2004 OCCIDENTAL PETROLEUM of QATAR
PS-1R tie-ins and piping modifications to accommodate new import risers and pig receivers
Installation of additional Crude Export Pumps
Preparation of Hazardous Area Classification Drawings
Installation of Multiphase Flowmeters (MPFM) to various remote wellhead jackets
Detail design of new remote water disposal wells
Study of Process Control Issues for PS-1 HP and LP separators and liquid handling facilities
Topsides, risers and flowline modifications for various wellhead jackets

2002 QATARGAS LNG PLANT
ESDV valve monitoring and leak detection
Conceptual study on Fixed Firewater Spray System for existing sulphur handling facilities
Firewater/deluge system simulation using Pipenet software
Fuel gas supply line to IPP Calculation of the blowdown rate of the fuel gas pipeline system using HYSYS software

1999 – 2002 ABB LUMMUS SAUDI ARABIA
Al- Khobar, Kingdom of Saudi Arabia
PROCESS ENGINEER

2002 Arabian Consulting Engineering Centre (subsidiary company of
ABB Lummus in Saudi Arabia)
Man hour estimate to develop FEED package and detailed engineering design for various projects
Involved in the Front End Engineering for Saudi Chevron Philips tank farm expansion
Pipelines simulation using Pipephase software and calculation of gas compressor horsepower requirements for Saudi Aramco Core Venture Studies

2001 Arabian Consulting Engineering Centre
Pressure drop/hydraulic calculations for National Gas Distribution Company (NGDC) and Jeddah Refinery Custody Metering Installation projects
Checking /Revision of P&ID's for Jeddah Refinery Custody Metering Installation project

2000 – 2001 Saudi Aramco Oil Facilities Planning Department (Pipelines Group)
Assigned as a planning/process engineer, tasked to develop a long-range pipelines facilities master plan.
Plans and conceptualises pipelines configuration and required facilities to accommodate the company's 15-year forecasted increase in oil, gas and NGL production
Performs pipelines simulations of different scenarios to identify the most economical and safe pipelines routes and configurations
Develops technical presentations and reports to be presented and reviewed by Saudi Aramco's management

1999 – 2000 Ibn Zahr MTBE Plant
Worked as the lead process engineer in the design / upgrade of Utilities Plant of the biggest MTBE Plant (Ibn Zahr) in the Kingdom of Saudi Arabia

MARCH 1997 – DEC. 1998 ABV ROCK GROUP – KB
Riyadh, Kingdom of Saudi Arabia
PROCESS ENGINEER
1998 Site 1 & 7 (Underground Storage Facilities)
Involved in the basic and detail engineering design of the underground storage facilities
Developed PFDs and P&IDs
Performed heat and mass balance, line and equipment sizing calculations
Performed hydraulic analysis
Generation of piping line list and equipment list
Technical Bid Evaluation of pumps and vendor packages
Replied to technical queries from site engineers

1995 – 1997 FLUOR DANIEL INCORPORATED PHILIPPINES
Makati City, Philippines
PROCESS ENGINEER
Worked with this international engineering and construction company as a process design engineer and was involved in various projects such as Equate Infrastructure Project-Kuwait, Procter & Gamble-Vietnam, Shell Bitumen Plant and Philippine Geothermal Incorporated.
Conceptualises and develops process schemes as may be required by the project
Prepares Process Design Basis
Prepares process flow and piping and instrumentation diagrams (PFDs and P&IDs)
Performs heat and material balance, line sizing and pump sizing calculations
Generates piping line list and equipment list
Generates miscellaneous equipment data sheets
Vendor drawing review
Plant as-built

1991 – 1994
Worked as a process operator in various operating plants in the Philippines and Saudi Arabia.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 3301 to 3350 of 6444)

Go to Search Parameters...

Brief Description

More than three years of industry experience including asset evaluation, reservoir simulation, annual reserve reporting, long term depletion strategy, enhanced recovery evaluations, expert witness testimony, economic evaluation and forecasting.

6 years of experience in the oil & gas industry as Plant Operator, Control Coom Operator and Production Supervisor at the Kharyaga Oil Field (North of Russia).

M.Tech (HSE), B.Tech (Safety and Fire Engineering) specialized in oil and gas sector

Petroleum Engineer

I am Technician of all types electrical switchgear panels.

onshore & offshore "jack up " Drilling supervisor /foreman

A Team Leader,Conveyor Attendant, Operator/Mechanical Technician, Responsible for Flow wrapping machines/Nordenmatic 400 for the production of Tooth Paste. Also responsible for raw material delivery using a valve system in a control room. Mechanical Engineering Technician lll certificate holder.

BE( Elect & Instrumentation) / Diploma In Industrial Safety / Diploma In (Elec & comm) with 2.5 yrs of Exp In Steel Plant

16 years in Planning/Scheduling/Project Controls for Power/Waste Water/Mining & Metals/Oil, Gas and Petrochemicals projects from concept to commissioning, particularly in multinational, multi cultural and consortium environment in India, Indonesia, Saudi Arabia, USA, Singapore, Bahrain and Canada

I have ~9 years of refinery operations experience ( diversified )

Subsea Controls

Dynamic and result-oriented professional with over nine years’ multi-discipline experience in the Oil/Gas industry. Exposure thus far has amalgamated my strong technical background with the ability to interpret commercial aspects of contracts and project strategies.

More than 13 years experience in design and operations. Knowledgable in Process Simulation softwares such as HYSIS, PIPESIM, PIPEPHASE and PIPENET and line and equipment sizing calculations. Preparation of P&IDs, datasheets and Cause & Effect charts. HAZOP, HAZID participation.

Mechanic specialist

Welding Inspection, QA/QC Documentation, Pipeline construction, Fabrication and Installation

Nearly Eight years of Professional work experience in Project Management / Customer Services, of which Six years in Project Planning and Execution.

Over 8 years in the field of detailed engineering of Piping systems, which comprises preparation of plot plans, equipment layouts, piping layouts

Electrotehnical diploma, Operator computer license, Help programmator Fox-Pro license

Stress Engineer Proficient inNastran,Ansys, Ideas,NISa (Finite Element analysis software),C++,C,Visual Basic, Fortran etc

Working as an Engineer in the Instrument Maintenance Section of Karnaphuli Fertilizer Company (KAFCO), Bangladesh since October 2002 with all kinds of instruments such as transmitters, controllers, PLC, DCS, etc.B.Sc.Engg (Electrical & Electronic Engineering) from Bangladesh University of Engineerin

Effective planning and organizational skills including interacting with people, from upper management through hourly workers at various technical levels.

Multi-skilled, highly motivated and tenacious candidate with extensive skills in advanced drilling techniques, drilling engineering, production technology, well completions and workovers, reservoir engineering, team work and analytical and research competencies, developed through group seminar prese

i am engineer in chemical engineering and i have 6 years experience in crude oil treatement and 01year in gas treatement ,i am supervisor

8 + years experience in Instrumentation and Control, DCS field equipments (Yokogawa DCS & Field instruments). Good Knowledge on DCS, Pressure, Temp, Flow and Level devices, Control valves, analyzers and euipments. Additional Fieldbus Knowledge.

SH&E and Loss Prevention Engineer, provide services to exploration drilling, transportation and other facilities. Acts as advisor to Field Operation Manager on SH&E issues. The services are Site & Facility Audits, Fire Protection, Hazard Identification, Risk Assessment and the implementation of Op

Seeking a quality environment where my knowledge can be shared and enriched. Searching for a better opportunity where I can implement my expertise, programming skills, project management skills and administrative skills.

I am not very sure what a resume summary should say. This resume will tell you that I am a motivated individual willing to get into the engineering field. If you have any questions please let me know.

B.Tech in Mech Engg

B.E(mechanial) with skill of autoCAD and CATIA looking for freshers job

POWER SYSTEM DESIGN

Operations, Business Developement, International experience, North Africa, Saudi, Kazakhstan, Russia.

20 years experience in DCS, SCADA, Controls, Commissioning, Design and engineering worldwide

I have BCs of process (Chemical) Engineering with five years expoerince in oil & gas plants design.

Piping field and desginer, project engineer coordinator /hdpe expert

Experienced Oil & Gas Project HSE advisor with QA/QC background. Excellent communication and writing skills, highly capable with languages and graphic presentations. Successeful in onshore & offshore construction projects in America, Europe, Africa and Asia.

To act as engineer of reservoirs, petrophysics or drilling, in oil or gas reservoirs. To generate the biggest added value to the Company contributing with effective and highly profitable solutions.

B.E(Petroleum) 4-year degree program.

workover & completion supervisor and now working as workover & completion superintendent

I am a qualified IMCA ROV Pilot Technician who has undergone training as a ROV Pilot Technician at IDESS Maritime Centre (Subic), Inc.Philippine and the 3 in 1 Electronic/ Hydraulic/ High Voltage Course at Miralco Foundation Institute Philippine.

i have 9 month experience in plc , scada. In company where i am working

I have done my B.E Electronics from a reputable university of pakistan.I have worked on PLC programming,Motor Control,Scada&DCS,Mcroprocessor&Microcontroller.In communication field Digital signal processing & Cisco networking are the field of interest.

Dedicated and disciplined, self motivated, good inter-personal relationship and team player. Ability to plan and realize set objectives, Quick learning skills, highly adaptable and service minded.

In May, I will be a graduate of the #1 ranked Petroleum Program in the nation. My numerous skills and accomplishments will aid me greatly within this exciting industry. In addition, my passion for business/economics has encouraged me to pursue a business foundations degree.

Safety co-ordinator in one of the world reknowned MNC M/s Owens Corning india ltd. Engaged in implementing safety policies, conducting departmental meetings on safety as per the countries regulation. Preparing safety audit report for top management.

I have installed, serviced, maintained, repaired centrifugal and reciprocating compressors, turbines, pumps, blowers and drivers.

Welding / Piping Inspector having more than 12 years experiance in oil & gas Field.

B E Mechanical Having 10 plus years of experience in Manufacturung, Production, Maintenance, Installation & commissioning, Inspection & Testing of CDP Fabricated Parts of Industrial M/c.

Naval Architect with 10 years experience in Inspection, QA/QC,ISO 9000,Project Management,General Administration in Marine,Oil & Gas Industry in the United Arab Emirates.

Simulation, Calculations for PSV, HE, Separator , HYSIS and Design II

CAD: Microstation V 8,Microstation 95 (ver 05.05.01.65), Microstation SE (ver 05.07.00.25),Microstation/J (ver 07.01.01.36), I/RAS B (ver 06.00I/RAS C (ver 08.00),Descartes (ver 6.0)Autocad

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 [ 67 ] 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out