Resume - SCADA Specialist

Misco Jobs

Resume #2637

CONTACT INFORMATION:
View contact information...

Objective Proclivity to attain professional acclaim through a successful carrier, utilizing my vast experience in Telecommunication and Control System Engineering.
Education B-Tech in Electronics and Communication Engineering from the University of Calicut, Kerala, India. With Specialization in Computer Organization and Digital Switching Systems. Completed a project in Microprocessor based Digital Storage Oscilloscope and conducted a seminar on Microprocessor based Digital Filters as part of academic curriculum. From 1983-to-1988 Graduated with 74% marks.
Driving License Holder of UAE driving license
Professional experience Total of 14 years work experience in highly competitive and demanding positions in my professional capacity as an Electronics & Telecommunication Engineer in the following reputed Organization. Present job: SCMS Engineer From June-2001 onwards working as Substation Control and Monitoring Engineer in Al Ain Distribution Co, an affiliate of ADWEA.a) Company Profile: Al Ain Distribution Co, an affiliate of Abudhabi Water & Electricity Authority is Distributing Water and Electricity to the Al Ain Region of Abudhabi Emirates, in UAE.Activities and responsibilities: Main activities:Ø Installation and Commissioning supervision and Testing of SCMS (substation control and Monitoring Systems) such as Simatic WinCC from Siemens used in a 220/33kV Grid Station at Al Oha, MicroSCADA from ABB in 220/33kV Gridstations at Al Eraad and Mezeyad, and PSCN-3020 from ALSTOM at 220/33/11kV Grid Stations at Al Khazna. Ø Review and Comment on SCADA/SCMS Design Drawings and review / preparation of SCADA Signal List.Ø Member in ADWEA Standard Technical Specification Committee for SCMS, which prepares Technical Specification for new projects covering RTU/SCMS/SCADA etc.Ø Evaluation of Technical Specification prepared by various consultants for different SCMS, and SCADA projects and evaluation of Technical Submittals.Ø Preparation of User requirement Specification for Distribution Automation System, SCMS, SCADA Pre-paid metering System, and AMR SystemØ Site Acceptance Testing and Factory Acceptance Testing of Substation Control Monitoring Systems, Telecommunication Systems, RTUs and IEDs, Ø Co-ordination with Consultants and Contractors on new SCADA & SCMS Projects Ø Supervised the Commissioning of a dual redundant SCADA Network supplied by ABB, based on their SPIDER SCADA System controlling 40 numbers of 33/11kV Primary Substations in Al Ain Area of Abudhabi.b) Previous Job-1: Senior Projects EngineerFrom May 1998 –to- June-2001 worked as Senior Projects Engineer in Cimac Automaton Limited, JAFZ, Dubai. Designation and responsibilities: Joined as Senior Engineer Control Systems, and became in-charge of Projects Management, before leaving the job in 2001. Designed and implemented Major SCADA Projects for Dubal both in Power and Production Plants.Duties and responsibilities also include the preparation of Project Documents like Functional and Detailed Design Specification, Technical Manuals, vendor approvals, etc.Projects handled:Ø Project-in-charge for SCADA Integration of Various plant areas of –Dubai Aluminum Ltd.Designed and implemented dual redundant SCADA integration, based on RSView / GE Harris SCADA running on a 100Mbps Win-NT based dual Ethernet LAN.Fully involved in the design and implementation of the Control network with separate fiber communication networks for PLC and SCADA based on various industrial communication protocols such as DH+, Control Net, Sinec-L2, TCP/IP, 60870-101 and 103.Ø Project co-ordination activities.Designed and Implemented SCADA projects for Abudhabi Water Network, and SCADA systems for Fujairah –ENOC tank farm.Ø Dubai Cargo Village Expansion. Application Engineering, Project Management for the supply of Control Systems for Emirates Sky Cargo Project. b)Previous Job-2:From November-1996 to April-98 worked as a Plant Engineer in Juma Al Majid –CPP, Dubai, UAE. Ø In-charge for a state of the art Sand Washing and Waste Water treatment Plant. Responsible for the production and maintenance and reported to the General Manager. c)Previous job-3:From March-1993 to September-'96 worked as Maintenance Engineer in Khorfakkan Container Terminal, Sharjah. Ø Responsible for maintenance of all Electronic and communication equipment inside the port including a LAN systems and VHF radio Equipment. Ø Supervised a team of Technicians and Electricians reported to the Engineering Manager. Ø Also involved in the Installation of new Power Generators having state of the art Control System and MMI/HMI systems.d)Previous job-4: From June '88 to Jan-'93 worked in BPL Systems, Palakkad, India. Ø Started my carrier as a trainee Engineer in their R&D department, involved in development of various modules for Power Line Carrier Communication Systems including a frequency synchronization system for SSB-SC system.Ø Involved in the Engineering of SCADA Systems.Ø Promoted as their Senior Engineer Quality Assurance during my third year with BPL and played a key role in preparing Quality plan and other documentation and record formats for ISO-9000 certification. Ø Also involved in testing of Digital and Analog PABX systems, Telephones, LMU's, and FSK based DCP systems. Ø Extensively involved in Type testing and acceptance testing of communication systems as per IEC standards from accredited certification authorities such as CPRI, SAMEER, etc.
Technical Trainings Undergone Ø Two week training on PSCN-3020 at Montepellier FranceØ One Week Training on MicroSCADAØ One week Training on Simatic WinCCØ 4 day on site training on SPIDER and ABB -RTUsØ One Week Training on MAXIMO-CMMMSØ One Week Training on ArcGIS
Seminars, short time courses attended and area of Proficiency Ø Highly proficient in Windows NT, TCP/IP Networking, Structured Cabling and Fiber Optic Communication systems such as FOC, STM1 ( SDH/PDH), Etc,.Ø Capable to design and integrate SCADA and PLC systems based on various platforms. Also experienced in providing solutions to various SCADA requirements, specifications and sourcing of hardware and softwareØ Well versed in various communication protocols including MODBUS, PROFIBUS, MPI, LON, EFI.P, K-Bus, DH+, Device net, IEC 60870-101, 103.Ø Working knowledge of MS project, Oracle SQL, Java, Java Script, etc.Ø Attended Seminar on GE-Fanuc TUV approved TMR-GMR fail safe control systemsØ Carried out many SCADA Integration Projects based RSView SCADA, Intellution, Simatic WinCC, MicroSCADA, PSCN-3020, and ABB SPIDER SystemsØ Used and worked with Rslogix5, Step-5, PSPICE, WBFCONF, Modsoft, Quickpic and AutoCAD. Ø Attended Value Engineering workshopsØ ISO-9000 2001 Seminar Conducted by BVQIØ Job Instruction course for Supervisors (- Training Within Industry),

References will be provided on request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1951 to 2000 of 6411)

Go to Search Parameters...

Brief Description

30 years experience in all types of heavy industry, the equipment used, predominately in coatings and linings. Experienced in all phases of construction projects. Supervised numerous larger projects, overseen and implemented safety, inspection.

Working knowledge of marine diesel propulsions and electricity generation systems. Familiar with mighty power engines. Knowledge of support systems such as fuel centrifuges, air compressors, pumps, hydraulics, refrigeration, heating, and air conditioning.

Provide diverse engineering technical support for research, reporting and production. Work history includes oil and gas production, oil and gas debt and equity capital transactions, and oilfield equipment.

I have worked both on and offshore for 30 years. I have also worked in shipyards, including writing commissioning procedures, commissioning equipment and writing preventative maintenance procedures. I have current offshore survival and medical certificates. I am immediately available.

Multi-disciplined sub sea engineer, extensive experience gained in the design, selection, operation, maintenance and acceptance testing of well control equipment, working in a variety of different environments to the standards specified by the manufacturer, drilling contractor and operator

I have been in the offshore industry for more than 23 years, my recent experience has been with new build drilling rigs as Commissioning Manager; Team Leader Mechanical and Piping Systems; Project Superintendent. Previous 14 years experience was with the British merchant navy as an engineer officer.

Seeking a full time position to actively contribute to the technical achievements of a company in the oil and gas industry

QA/QC Welding Inspector

Resume for the job in maintenance or operation field.

More than 26 years experience directly involved in the offshore oil and gas industry. Experienced in detailed structural engineering, fabrication and installation of offshore platform topsides including floatover installations and Floating Production Platforms.

SCADA Specialist

25 years in Oil& Gas, Power and Petro-Chemical Industries. I am a multi disciplined QA/QC professional. Safety oriented, team oriented, quality oriented, and production oriented. I have organizational and managerial capabilities. I would look forward to an opportunity to serve your interests.

Eleven years of experience in design, development, testing and implementation of Application Software.

BS in civil engineering and MS in structural engineering. Have worked as a civil/structural design engineer for 14 years in petrochemical plants design and construction. Skilled with MS office, Staad-Pro & Risa3d. Familiar with AutoCAD. Contract only.

Senior Networking Engineer

Casing design and selection, cement slurry design, BHA design, hydraulics calculations, BHA design, drill bits, drilling fluids design, solids control equipment, drill strings, well control methods, surface equipment, directional drilling. Schlumberger Drilling Office Software & TDAS.

Did M.Tech in Petroleum Engineering and B.Sc. Engineering in Mechanical discipline.

5 year experiance in rotating equipment field. Experiance includes service, manufaturing, engineering, sales and marketing

Working in siemes power generation having 11 year exp.

Broad experience in mid-stream and upstream oil and gas production and facilities. B.S. double major Petroleum and Chemical Engineering. M.S. Environmental Engineering

To seek a challenging position that will utilize my expertise in the field of Process instrumentation. And have an opportunity to work with highly professional group of people, hence to achieve personal growth, satisfaction & welfare of our organization.

Hi, my name is Pervez Iqbal, I am a mechanical engineer with 7+ year experience in my work. I am searching a job for myself in the US. My work status is permanent resident/green card.Currently I am living in California, but willing to relocate near my job area . I have work experience in CAD/CAM de

Material Selection,Welding Procedure Specification(WPS), Non Destructive Test Procedure(NDT)

Experienced and Professional I&C Engineer

More than 7 years seismic acquisition, processing, Interpretation and reservoir Geophysics experiences with several major seismic companies and seismic processing contractor company.

Possess Degree in Engineering and more than 10 years of Professional Experience in Project Planning and Controls through various project phases such as Front End Design, Detail Design, Procurement, Manufacturing and Construction for various Oil & Gas, Petrochemicals & Chemical projects.

I am a Petrophycisist with 8 years of experience

Multi-disciple project engineer covering, electrical, instrument, mechanical, piping work etc. Gas Turbine & High Voltage Power installation work. DCS work. Contract Management / Planning / Cost/ Commissioning, Training, Maintenance,. Vendor Inspection. Contract estimation work, QA/QC/QS.

Senior Operations Technician with over 25 years of experience as control room panel man/ field operator of LNG Plant, Jetty coordinator LNG. High pressure hydro cracker (isomax), hydrogen plant, CDU, Vacuum distillation and Visbreaker units. National Diploma in Technology Chemical Engineering

I want to work as Instrument Foreman/ Technician with good knowledge and experience in Process Instrumentation in Power plant and Desalination Plants.

Resume for Material Engineer who is Having exposure in SAP and PRIMAVERA.

My total professional experience is more than 11 years including 9.8 years of Petrochemical field of Oil refineries (PARCO & NRL Pakistan) & Oil/Gas field. Currently I am doing rotational job as Maintenance Planner with Occidental Oman Inc on Safah Oil & Gas Field Oman since July’07.

Chemical Engineering Graduate working in Oil& Gas Upstream Industry more than 4 years who seeking a position, which utilize my skills and abilities to the optimum level and which also, offers scope for personal and professional growth while being sincere, diligent and hardworking.

Drilling Fluids Consultant

I am Interested in joining your company, I am Currently working in an Oil ang Gas Safety Company as a Safety Officer/H2S Safety/Fire Tech in Offshore and Land Rigs. I am fully equipped with safety trainings and knowledgeable about the Rig Safety and Drilling Operation.

As a Reservoir Development geologist I have worked mostly with unconsolidated clastic sediments designing geological models by combining cores, well logs, seismic data and petrophysical models forward design the navigation pattern for horizontal wells drilled through these sedimentary bodies.

Professional with 4+ year’s oil field exploration rig experience - willing to travel and relocate. Enthusiastic oil safety professional with proven skills in: Oil and Gas Exploration and Characterization Petrophysics Seismic Attributes, Seismic Inversion Seismic Interpretation

Dimensions of my career profile extend to in depth knowledge of electrical design and detailed engineering activities for the project related to chemicals, petrochemicals, oil and gas plants. Qualification: Bachelor Degree in Electrical Engineering, Exp: 5+ years,

Engineer - Technical Support and Design LPG SNG GAS Operations

Participated in conducting FAT/SAT of Foxboro SCADA., Participated in conducting FAT/SAT of Ascom PDH/SDH Telecom System. Went for 15 days training for Administrator and Operator training on Foxboro SCADA System at Foxboro Rome, Italy.

Responsibilities include working in PLC systems, Microprocessor controls and various conventional pneumatics and electronic instruments, all of which require the ability to read & understanding engineering drawings such as P & IDs, loop drawing and ladder logic drawings.

I have hands-on experiene in the field of Oil&gas, refinery as well as Petrochemical for past 10 years in Indai as well as Guld. I was invloved in the Control System FAT, Power-up, SAT, Hot/Cold cut over and Maintenance.

Engr, design, & spec of process instruments with field instrumentation, PLCs, & DCS's in refineries & petro-chemical plants. Created schematics, loop diagrams, install details, location plans, & data sheets. Proficient in AutoCAD. 100+ university hours in Industrial Tech & Instrument Technology.

CADD Drafting, Geo-Tech or Digitizer

Worked in Oil/Petrochemical/Refinery projects for a period of 21 years as Manager Construction.

I'm a skilled Well Engineer with a wide experience in well construction, stimulations, completions, and workovers. Strong team management and communicational skill with experience to manage the complete well engineering process from well design to drilling execution of exploration projects.

Develop plant layout. Nozzle orientation. Check vendor prints. Prepare detailed drawings. Modeling 3D and Isometric. Job control and records. Pursue codes, standards and specifications. Assist construction. Maintains job control and records. Check work for accuracy. Prepare punch list.

14 Years of experience in OIL an Gas Industry in Venezuela Engineering experience in Oil Treatment Plants, Compressor Plants, Oil and Gas Gathering Systems, Pipelines, Rotating Equipment.

I wish to apply for a position as an Instrumentation or/and Electrical or a Process Technician. I have 22 years experience in the Instrumentation and Electrical field. I complete my T4, I pass my Instr. trade test. I write my wireman’s license and also my Elect trade test.

I am having total 15 years experience in design field, 5 years in manufacturing detail designing in valve industry-fouress, 5 years in hvac & pollution control field- abb/flakt, 5 years in design consultancy firm - chemtex- pds 4+ years exposure.a

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 [ 40 ] 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out