Resume - I have been working in a Piping related discipline for more then 15 plus years a...

Misco Jobs

Resume #26399

CONTACT INFORMATION:
View contact information...

CAREER OBJECTIVE
* Learn Client's increasing product line to be able to innovate through incremental design improvements
* Develop technical skills in a fast paced technical environment
* Develop personal skills to meet the requirements of an increasing responsibility and experience level

INTRODUCTION
I am experienced in doing the following activities:

* Generate conceptual designs or customise existing designs for proposals or projects from customer or internally generated specifications and prepare design layouts using 2D or 3D drawing packages.
* Locating of equipment's in the working area provided, considering various criteria, like Accessibility, Pipe length, Installation etc.
* Prepare a good Piping and Mechanical Engineering design using PDMS or AutoCAD software to produce piping layouts, Isometrics and other piping/engineering related doc.
* Generate Initial stage Manual free hand sketches with reference to Modules and equipment layout, Spec, Civil/Strl. Drg. etc.
* Tank Farm or Rig Platform drawing and design generation of Piping Isometrics.
* Preparation of fabrication isometrics (spool Isometrics)
* Bill of Material Take-off and consolidation of BOM using Excel of QMS
* Modelling and Preparing of Pipe Support details and sketches.
* Building of Catalogues components as per project requirements.
* Review for Checking of pipes and for possible clashes.
* Verify design where necessary to formalised in product design files and Product Design Documentation.
* Present design drawings to engineering staff during internal design reviews.
* Prepare and review detail drawings (selecting raw material as necessary) prepared from design layouts.
* Make necessary engineering changes to product drawings.
* Participate in investigation and disposition of non-conformances.
* Generate equipment assembly, test, handling, storage, rework, maintenance and commissioning procedures as required.
* Provide necessary support to the various internal departments (manufacturing, shop, planning, QA, commercial, purchasing, assembly etc) as equipment is progressed through the facility.
* Attend Field service where required during onshore/offshore installation.
* Carry out general engineering duties as identified by the relevant group leader or engineering manager.

AREA OF EXPERTISE:
I am well capable of preparing all related drawings / doc. using PDMS or AutoCAD software. I have great knowledge on most Material and standards.
I have high work initiative and can take up responsibility and work with less guidance as a task force member. I have a speed to work in PDMS or AutoCAD and have a reasonable knowledge on the software for 5 years.

PRESENT EXPERIENCE:
Presently working in Sembwang Marine And Offshore Engineering, Singapore, as Senior Piping Design Draftsman from Oct. 2002 Till Date. I have joined the design team in the process of developing all the equipments and piping layout plans including Pipes and Pipes supports, Isometrics and P&ID up to As built stage. I have successfully completed handling the following projects assigned to me:-
Halfdan Field Development Phase III Project, Panyu offshore well head platform Devon Energy China and currently I am assigned to do the "Bill of Material " for ERHA FPSO Project. The BOM's are generated by means of QA software system (Quantity Management System)

Singapore Oxygen Air liquide Pte Ltd (SOXAL)
Period Served: Jan 00. to Sept. 02
Designation: Piping Draughtsman

At SOXAL I have work with the Project Teams, mainly supporting Expansion project and New plants base on customers/owners requirement. Jobs including preparing Tender drawings, sketches, MTO for piping in plan or isometrics. Attending daily Site or Technical and Construction meeting and discussion. Document control in accordance to ISO 9002 Standard. Daily site inspections and progress report on any outstanding work to be carried out the next day. Coordinating with Site staff and contractors regarding construction matters.

Esso Refinery Singapore Pte Ltd
Period Served: May. 95 to Mar. 97
Designation: Piping Draughtsman

During my appointment at Esso I was involved in the preparing and assisting the Technical Inspection Team in Line Walk Pipe Tracing and putting up proposal for repair work by means of developing Isometrics and Layout plans on existing pipes and equipments. Checking of piping installed on site and submitting daily progress reports.

Zenecon Engineering Plt Ltd
Period Served: May. 90 to Jan. 95
Designation: Piping Engineer / Site coordinator

I was a Site coordinator cum Piping Engineer having a group of Drafters and Site supervisors under my instructions. I was involved in the daily site meeting and inspection. Coordinating all site issues including pipes clashes, sites and space constrain due to other services or structures problem. Daily checks that all safety and standards all followed during fabrications and constructions. Prepare drgs and docs needed for approval by Consultants and Owner.

QUALIFICATION: Secondary Level

Other Qualification: Certificate course in 2d/3d software AutoCAD.
from Nee Ann Polytechnic
PDMS and QMS program (In-house Training)
Microsoft Certified System Engineer(MCSE)
from Informatics Singapore

ADDITIONAL INFORMATION
I have a high work initiative and take up challenging project schedules to meet project requirements.
I can coordinate with other disciplines, can communicate well in English, I have a trust and will to learn in engineering field. I can prove as an valuable asset for the employer, when given an opportunity.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5201 to 5250 of 6411)

Go to Search Parameters...

Brief Description

I have experience with SCADA system using Citect and RSView (Allen Bradley) as Man Machine Interface (MMI) and control system such as Allen Bradley PLC5, SLC500, ControlLogix, SimaticS5 and SimaticS7.

I have worked in the Petrochem/Oil and Gas industry for 20 years. Vast knowledge of all support qualifications, document control, purchasing, expediting and subcontracts work.

Expertise in Project Engineering, Cadd Management & related fields.

I have been working in a Piping related discipline for more then 15 plus years and have experience in Engineering design for Offshore Platforms, Refinery Projects, Process Plant, Wafer Plant and also in the Architectural Building & Mechanical Engineering Industrial.

Marine Engineering, Risk Assessment, Lloyds Surveyor, Project Management FPSO Projects worldwide

Petroleum Engineer, with 5 years experience in International Services Company for Oil and Gas Exploration and Production. Within a complete Integrated Study Team, performed Engineering analysis in six Venezuelan and Mexican Fields.

Lead construction engineer (structural, methods, lifting, marine)

Currently employed as the primary Electrical Engineer. Engaged with improving safety, training, documentation, and implemeting preventive maintenance goals.

•Nebosh International certificate in Occupational Health and Safety , Membership Examaination of The Institution of Fire Engineers UK., Fire Officer course from National Fire Service College Nagpur India

I am a bachelor degree holder in engineering, with vast experience in oil and gas construction projects on rotating/static equipment erection and installation, equipment inspection , operation and maintenance.

Allen Bradley Processor Class- Certificate, Siemens Processor Class-Certificate, GE Processor Training- Certificate, First Aid/ CPR, Microsoft Excel training Class, Arc Flash Training, SAP, MP2, MS Project

i have complited a MSc degree from pune univeristy,worked as a geologist in geotechnical field,wel known to GPS ( Trimble Geoexplorer 3 )

A proactive leader with extensive reliability centered maintenance management and hands-on experience in the repair, overhaul and troubleshooting of mobile equipment, initiate change and reengineering of quality improvement processes while maintaining a positive, safe and productive environment.

Telecom Transmission Engineering, Computer and Electronics

I am a Fire & Safety Engineer,Presently working as an ENGG. (F & S) [Fire Station Incharge] in a PETROCHEMICAL INDUSTRY with having an experience of 2yrs , Have done 4yrs Bachelor of Engineering in FIRE & SAFETY, Presently persuing P. G. Diploma in Industrial Safety.

With more than ten (10) years of extensive experience and knowledge in Pipe stress calculation and support design of oil & gas, petrochemical, refinery, chemical, LNG, LPG, onshore, nuclear power plant and subsea piping projects.

M.Sc. Environmental Engineering and B.Sc. Civil Engineering holder seeking more experience. Although I do not have long working experience, I assure you that I am a keen learner and will work hard for the department if I am selected.

In-service / shutdown inspection of most of the static equipments in a plant, such as pipe works, pressure vessels, hydrogen crackers, reactor vessels, storage tanks, reformer tubes, risers, topside structures, well head parts, valves, etc. , Inspection of all plant construction related activities

LAB CHEMIST ANALYST

I could do a job that deal with Operation Geologist and Development Geologist

Engineering graduate experienced in installation ,pre-commisiioning ,commissioning

Electrical Engineer, Six Sigma, Lean, Manufacturing

Over 25 years Quality Management Supervision experience in the Oil & Gas and Heavy Engineering construction.

Adaptable to various working conditions including a multi-national workforce and a minimal supervision. I enjoy learning new skills and want to improve my drilling skills in international posting. I’ll be a good asset for my employer as I am a proven team player available to work world-wide.

Planning / Project Controls Manager , PMP certification, Primavera 3.1 / 6 professional user, Civil Engineer, Cost Control and Claims experience

Project Manager/Construction Supervisor/Contracts Manager/Claims Manager/Cost Engineer/Construction Manager/Site Supervisor/Civil Engineer/Quantity Surveyor etc.,

Buyer, Purchasing Agent, 38 Yrs. Material Handling and Purchasing Experience

Project management, commercial management quantity surveying

Automation/Electrical/Instrumentation/Supervisor

Seven years experience in quality control and quality assurance, welding inspection, Nondestructive tests (RT, UT, PT& MT),destructive tests (tensile,bend,hardness, macroscopic, impact, corrosion,...), in the fields of (Pressure Vessels,Boilers,piping, steel structure , tanks & Pipelines) at gas &

Drilling Crew

Excellent experience, coupled with a strong quantitative and analytical background, makes me an excellent candidate

Quantity surveyor, estimation and land surveying works

Consultant, Project Management, Mechanical, Marine Engineering, HSE and Quality.

Rotating Equipment Repair and Refurbishment of Rotors and other Internals of Compressors, Steam Turbines, Gas Turbines and Screw compressors. Over 10 years with OEM worshop as Works Manager of Service shop and Head of Technical Services. An ASME Authorized Global Training Instructor.

Geologist with good expertise in planning, follow-up and reporting of geotechnical and geophysical site-/soil-investigations.

EDP Data Management and System Analyst

Rotating & reciprocating equipment technician

To contribute strong background in project management, civil engineering, contracts and along with unique drive for excellence and success to your firm in a Planning & Control Engineer position.

Mechanical Engineer with 8 yrs experience in Material Management/MATERIAL CONTROLLER/MATERIAL COORDINATOR

Work History: July 2002 to December 2002 PDVSA INTEVEP Trainee August 2001 to October 2001 PDVSA INTEVEP Trainee Education: UNIVERSITY ESTUDIES Petroleum Engineer: Central University of Venezuela. Faculty of Engineering. School of Petroleum.( March 2003)

To obtain a challenging position that utilizes proven experience and skills.

Excellent interpersonal, oral and written communication skills, Good computer skills (MS-Word, MS-Excel, MS-Power Point, MS-Access, Oracle etc.). Excellent knowledge and Training on ISO 9001, ISO 14001, OSHA and OHSAS 18001. Master degree, Diploma in Safety, Training on HSE.

Electrical engineer (electronics) experience in the equipment of the Processing and quality control Activity area: Petroleum (2D & 3D land seismic data acquisition), skills: problem solving, self motivated, able to work under pressure in a challenging and a diverse cultural environment

A dedicated team player with excellent problem-solving skills. Valuable mechanical engineering experience in a variety of work environments: fabrication, project management, design in high tech, aerospace, automobile and offshore industries, cost control, QA/QC. AutoCAD, SACS, Inventor, Solid Edge

I’ve experienced in pipeline projects, sewage network system, drinking water network system hydraulics, river water and air quality models and EIA studies, etc.

B.Sc., industrial Engineering with 10 years experince. in project organization , planning and control, contractor for the construction and utility project, line production planning and control. Quality control and assurance, maintenance, system analysis and inventory control.•gripe with relevant int

B.S. Industrial technology from Ball State University. DCS training at Honeywell Automation College. Took 2 graduate school classes in pursuit of a Master's in Business Administration. 3 Years of refinery experience. Experience as an Operator, DCS Specialist, Project Management and Safety Audits.

11 years of experience in the Oil & Gas, Carried out various endeavours including feasibility study, basic engineering, detailed engineering, construction engineering and the supervision of yard construction and offshore installation.

Trad qualified Fitter and Turner with extensive experience in the repair and maintenence of pumps and pumping equipment.

First Prev 101 102 103 104 [ 105 ] 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out