Resume - Have about 25 years of experience in logging operations (Open hole, Cased hole a...

Misco Jobs

Resume #26575

CONTACT INFORMATION:
View contact information...

OBJECTIVES:
Seeking assignment in open and cased hole log data interpretation, wire line logging service and petrophysical research studies.

CORE COMPETENCIES:
Petrophysicist with wide range of working experience in open hole, cased hole and production logging data interpretation.
1. Log quality check / control of petrophysical data.
2. Qualitative interpretation of open hole, cased hole, production logging data for taking on the site decisions.
3. Quantitative interpretation of open hole logs for formation evaluation, reservoir characterization and formation parameter estimation.
4. Qualitative / quantitative estimation of reservoir parameters using CMR logs.
5. Petrophysical analysis using work station based software (GEOFRAME).
6. Capable of handling following Geoframe modules:

- Data load module for loading data from different media.
- Composite log display module for display of logs.
- Well Edit module for depth match, depth shift match and log Splice.
- Preplus module for environmental correction.
- ELANplus module for petrophysical analysis and estimation.
- Ressum for reservoir parameter estimation.
- Playback of CMR log.
- Re-computation of CMR log output with changed parameters.
- Playback of Dipmeter, FMS and FMI log data

7. Quantitative interpretation of production logging data.
8. Data acquisition for Open hole, cased hole and production logging services.

PROFESSIONAL PROFILE:
Interpretation of well logs:

Have about 10 years of experience as a log analyst. Have sound knowledge in interpretation of open hole, cased hole and production logging data.
* Presently using ELAN plus (Geoframe) software for interpretation of open hole logs for the last three years, otherwise used inhouse software LOCPROC.
* Analysed the open hole and production log data of fields in India, mainly
Mumbai High field, Lakwa and lakhmani field of Assam Arakan basin and
Ahmedabad and Mehsana area of Cambay basin. Issued formation evaluation report for exploratory and development wells.
* Made qualitative use of log data from CMR, FMI to facilitate interpretation of open hole logs.
* Quantitative interpretation of production logging data from flow meter, fluid density and temperature tool were made leading to study of production profile, injection profile, fluid loss if any. Detection of other well problems such as cross flow, thief zone, casing leak, packer leak etc have been made using temperature, fluid density, continuous flow meter tool data along with water hold-up meter, noise logging tool data and tracer survey data.
* Cement evaluation, casing corrosion etc using CBL, CAST, USIT etc.

Data acquisition:

Worked for about 13 years as a Logging Engineer for acquisition of well log data for open hole, cased hole and production logging jobs.
* Recorded data using resistivity tools (DLL, DIL), porosity tools (CDL,CNS, BHC etc)
along with Gamma Ray and Caliper log for open hole logging.
* Have experience of recording data from fluid density, temperature, flow meter, noise logging, water holdup meter, HP pressure gauge in producing / injecting wells.
Recorded data using CBL tool for cement evaluation behind casing, Multi arm casing caliper to study casing condition and free point indicator tool to detect stuck point for tubing / drill pipes.
* Have experience in perforation jobs for conventional and under balance perforations.
* Have experience in setting Bridge Plugs / Packers using wire line equipment.

Supervision / management of logging activities:

Worked for about three years for coordinating logging programs with logging service companies. Preparation of logging suits for exploratory and development wells, and financial evaluation of workload.

EDUCATIONAL QUALIFICATIONS:

Acquired graduation degree (B.Sc.with Physics, Chemistry, Mathematics) from Delhi University, Delhi (India) in Ist division.

Acquired post graduation and doctorate degree ( M.Sc. and Ph.D in Physics) from Kurukshetra University, Kurukshetra (India). M.Sc. was completed in Ist division.

TRAININGS RECEIVED:

Have received number of in-house trainings. Some of them are as given below:

1. Training on DDL-V logging unit, Dec 9-12,1991 at Ahmedabad. (Facalty HLS India)
2. Training in Unix, C, C++ and computer net working, May 24 – June 18, 1993
at NCST, Mumbai. (Facalty NCST)
3. Basic Petroleum Geology, Sept 7-11,1998 at Dehradun. (Facalty ONGC)
4. Advances in well log applications, Oct 6-10, 2003. (Facalty Mr.O.Serra)

TRAINING ABROAD:
During 1985, received training in "Operation repair and maintenance of Sodesep Production Logging Unit and related equipment". The duration of the training was six weeks and was conducted by engineers of M/S Sodesep, at Vitrolles in France.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 51 to 100 of 6429)

Go to Search Parameters...

Brief Description

Drilling Engineer, 17Y experience in conventional drilling and 2Y as a Directional Driller

Senior Production Technologist

I hold the B. Sc. and Master’s degrees in Geophysical Engineering from Polytechnic University of Tirana (1977), Albania. Thirty years of diversified experience in well logging, administrative projects, and quality control. Providing petrophysical support to the integrated study

30+ years of EPC and consultancy Process experience. Conceptual design, Simulation (Hysys / proII) of oil & gas and refinery processes. Expertise in oil & gas gathering stations, gas sweetening, dehydration; Water treatment and injection systems; NGL units employing Turbo-Expanders; Refinery units.

More than 30 years experience in civil structural design, consulting and supervision in upstream, downstream, and pipeline of oil and gas fields

Experienced on all refinery products and intermidiates. Competent assessor for ISO 17025

Free! Canadian professional engineer with 18+ years engineering experience including design, sizing, and specification writing of various static and rotating equipments in Oil Sands and industrial environment. In depth knowledge of API 610, 650, 579, ASME B16.5, B31.1, B31.3, B31.4, CSA Z662 & B51, ASTM.

Senior control and instrumentation engineer

M.E. + 18 years of experience + AWS CWI + NACE CIP -1 + API 510, 570 & 653 + ISO 9001 & OSHA 18001 Lead Auditor Training Courses

Indian, working for U. S. Dollar Seven hundred twenty million hydro-carbon handling project in NIGERIA and received excellent employee award Seeking Director / ManagerHSE/Environmental/Civil Education: Ph.D. (IIT Bombay) and Safety Diploma

Designing , Praparation & Checking of high pressure transmission pipelines

„w Trained competence through training in Electrical Design Software Analysis (EDSA) and Project Management Techniques

Petroleum Reservoir Engineer,

Experienced in multidiscipline project engineering.

Senior Mechanical Equipment Engineer, 23 years in LNG, Oil, Gas and Petrochemical with Project Management, Commissioning and Maintenance/Reliability background for heavy gas turbines, compressors, turboexpanders as well as all associated mechanical, instruments,electrical equipment and safety system

More than 28 years as a Petroleum/Reservoir Engineer in Exploration and Production Company with heavy emphasis on reservoir management: India (Oil and Natural Gas Corporation Ltd.), Kuwait (Kuwait Oil Company), Abu Dhabi (Zakum Development Company) and Oman (PDO-Shell).

Project Manager with 26 years experience managing Oil and Gas FEED, EPC, PMC, EPIC, and EPCM projects . Responsible for Senior Project Engineers, Contracts Administrators, Project Controls Engineers, Safety Engineers, and QA/QC personnel. Worked with and managed expatriate and multi-cultu

I am a graduated, experienced, professional marine engineer. 29 plus years of valuable engineering hands-on experience in the Maritime and Offshore Industry.

A dynamic professional with over 2 decades (25 years) of rich experience in Project Machinery Planning & Execution, Erection & Commissioning, Maintenance, Quality Assurance, Process Enhancements and Man Management.

I am holding a Master degree in Chemistry. I have 19 yeras of experience in Oil and Gas Industry. I worked as Drilling Fluid Specilaist for 11 years in Offshore and 3 years in land rigs. 5 years I worked as Refinery Quality Control Department. I have working for Oil and Natural Gas Corporation Ltd,

A B.Sc. Chemical Engineer with over 23 years of experience in oil&gas and Petrochemical Industry, I am specialist for different Petrochemical processes (Steam Reformer,H2/CO production-purification with Cold Box or PSA, Chlorine production and liquefaction…), commissioning and start-up. I am able to

22 years of experienced geophysicist/exploration specialist

ArcGIS 8.x/9.x, ArcGIS Server, ArcObjects, Virtual Earth, C#, VB.NET, ASP.NET, VB6

Geoscientist

Honor degree in Mechanical Engineering form UK and have gained more than twenty five years experience in the fields of major sub-sea assets management, assets integrity, offshore operations, projects and contracts management, inspection, maintenance and marine related projects.

15 years of experience with visible/near-IR and hyperspectral imagery, and image exploitation (I have co-authored a book on hyperspectral remote sensing). I have a Ph.D. in Geology, an M.S. in Computer Science and I will have an M.S. in Applied Math in Spring 09.

Licensed Professional Engineer, performance oriented, with extensive broad-based experience in multidisciplinary projects. Particular expertise in Instrumentation and Control Systems Engineering for Chemical and Oil & Gas Industries. Supervision of complex detailed Engineering and Procurement.

Registered Professional Engineer (P.Eng) in the Province of Alberta.

Over 30 years and broad range of experience in oil and gas exploration. Bachelor degree Geophysics/ Geology and MSc degree in Geophysics. Worked in most aspects of exploration, such as seismic survey planning, acquisition, data processing, interpretation, AVO, seismic attributesand seismic inversion

Highly Experienced Crane and Lifting Engineer

Over 20 years experience in chemical, petrochemical and oil&gas industry.

Good understanding of project management, implementation, operations of various utility systems, maintenance of chemical process industry equipments and quality assurance concepts. Good understanding of data handling and archiving processes.

Presently working as Sr APC & Opt Engineer in Qatar Petroleum Refinery. A total of 20 years experience in Petroleum Refinery industry (8 years in APC & Opt, 5 years in Technical Services and 7 years in Operations).

I have extensive experience in Oil&Gas industry and EPC, I have extensive experiencey in Rotating Equipments Design and I worked in a refinery in Egypt as the Head of the Rotating equipments for 14 years.

Having achieved many goals in my long career how MECHANICAL ENGINEER, I am interested in continuing my professional horizons by working as a FLEXURAL STRESS AND MECHANICAL PIPING DESIGN AND LEADING MECHANICAL ENGINEERING PROJECT for your respectable company.

I have over 25 years in civil and structural engineering and the construction industry.

Twenty two years experience in Project Cost Controls, Project Management, Project Engineering and Construction Inspection for the industrial, commercial, utility, petroleum and Environmental projects throughout Alaska. Experienced with Government Regulatory Agencies with Data Deliverables and repor

Advanced Process Control, Refinery experience 20+ years,

Free! Petroleum/Facility/Process Engineer with a diversified background and 24 years plus in Oil and Gas industry (upstream and downstream) - exploration and production, and Process Systems Engineering in the EPC industry. Computer applications to Oil & Gas Drilling, Production and Reservoir engineering.

Marine Engineer, Chief Engineer Unlimited

Have about 25 years of experience in logging operations (Open hole, Cased hole and Production Logging Services) and interpretation of well logs (Open hole, cased hole and Production Logging)

qa qc inspection oil gas engineer coordinator welding painting ndt auditing equipment

Accomplished PLC, HMI, automation, programmable controls specialist

A Production Engineer with over 25 years of oil and gas field experience in domestic and international operations. Solid record in building project teams in multidiscipline and multilingual work groups. Strengths include planning, organization, and communication.

In his twenty-eight years of Oil and Gas industry experience, Mr. Senulis has been responsible for finding a total of 141.5BCFG and 17 MMBO in his career at Gulf Oil, Amerada Hess, Trans-Texas, Apache Corporation, Meridian Resources and his own company, Epicenter Exploration. He has a well rounded b

Petroleum engineer with wide experience as Reservoir Engineer. This experience was obtained working more than 20 years in Venezuela as well as others three years of international experience working in USA, Holland and Trinidad

25 years experience as Water Treatment Specialist and Account Manager

+29 years of professional experience,7 years in materials laboratories and Seismological research Institutes, 22 years working for E&P oil and gas Companies in Venezuela.Expertise as Petrophysicist, background in science,extensive knowledge of computer language and application,experience in clastic

Electrical Engineer with more than 20 years of experience with PLC and HMI projects: Design, implementation and commissioning. I've worked in projectos for Food and beverage,

DRILLING ENGINEER

First 1 [ 2 ] 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out