Resume - Mechanical Engineer with proficiency in IDEAS, Nastran

Misco Jobs

Resume #26872

CONTACT INFORMATION:
View contact information...

OBJECTIVE:
A full-time position in mechanical engineering utilizing design and analysis experience along with effective teamwork and interpersonal skills.

SUMMARY
* 3000 hours of MatLab experience
* 800 hours of IDEAS Analysis experience
* 500 hours of FEMB experience
* 200 hours of PRO-E, ANSYS, NASTRAN experience

EDUCATION:
Master of Science in Mechanical Engineering
2005
University of Cincinnati, Cincinnati, Ohio
GPA: 3.7/4.0

Bachelor in Mechanical Engineering
August 1997 – July 2001
University of Pune, India
First Class with Honors

PROFESSIONAL EXPERIENCE:
I) Structural Analyst (intern) February 2005 – May 2005
Belcan Engineering Group, Cary NC

* Projects undertaken:
1) Finite element analysis of Axle casting Analysis using SDRC IDEAS. (Caterpillar Inc.)
* Performed 3-d and 2-d axis- symmetric finite element analysis for design support and analysis documentation.
* Created parabolic tetrahedral elements with higher element density at the bearing support.
* Represented the shaft as beam and connected to the axle casting using rigid spiders and gap elements to simulate roller bearings.
* Determined the stresses at the bearing supports, which result from the applied and induced loads, also provided a comparison of these stresses with the corresponding material allowable using appropriate theories of failure.
Tools: SDRC I-DEAS (v.11 m2)

2) Adaptor plate analysis (Small Wheel Loader), (Caterpillar Inc.)
* Imported and de-featured the model for meshing.
* Created a mesh using parabolic tetrahedral for the housing and extruded linear quadrilateral elements to form brick elements for the plate.
* Used spring elements and rigid spiders to support the engine and 3 pumps.
* Lumped masses were used to represent engine and pump at the respective CGs.
* Applied the loads and performed modal analysis and G-loads analysis to obtain the frequencies and stresses.
Tools: SDRC I-DEAS (v.11 m2)

3) Stick Analysis (Small Wheel Loader), (Caterpillar Inc.)
* Used quadrilateral, triangular and brick elements to create the FE model.
* Embedded 1 row of shell elements to simulate the weld.
* Modeled the doubler plate as shells and connected it through perimeter weld by extruding element edges and merging nodes.
* Applied the boundary conditions and observed the Von Mises Stresses.
Tools: FEMB, Nastran

4) Backhoe Loader Hood Analysis (Caterpillar Inc.)
* Created the finite element model using triangular and quadrilateral elements.
* Represented the welds by merging the nodes, and rigid spiders (RBE2) were used to simulate bolts.
* Performed non-linear static analysis to determine the load that will cause yielding of structures.
Tools: FEMB, Nastran.

II) Mechanical Engineer
08/2001 - 07/ 2002
Span Filtermist, Pune, India
Performed project titled 'Combination Filter Using Cyclone Dust Collector and Centrifugal Mist Separator'
* Designed and manufactured a Dust separator which would prevent machine dust from entering the mist separator which was designed to convert coolant mist back to liquid form.
* Conducted research in the field of cyclone and built an experimental cyclone dust separator
* Obtained data and formulated equations required to build the cyclone at smaller size as compared to those built in industry
* Modeled the separator in I-deas and analyzed for stresses using Ansys
* Achieved a final outcome where 80% of the chips were separated from entering the mist separator

Research Project:
September 2002 - February 2005
University of Cincinnati, Cincinnati, Ohio

1) 'Tradeoff analysis in minimum volume design of multi-stage helical gear reduction units'
* The principal aim is to present a generalized optimal design formulation with multiple objectives which is applicable to gear train of arbitrary complexity.
* Formulated the constraint equations and objective functions necessary for the optimization algorithm.
* Implemented Monte Carlo method for generation of random numbers required for starting vector.
* Generated Pareto Curves for 2-stage, 3-stage gear trains.
* Analyzed the tradeoff between surface fatigue life and volume of a three stage gear train using weighted sum method.
* Implemented Lp Norm Method to obtain best possible design from a large pool of available solutions.
Tool: MatLab

2) Modeling of Butterfly Valve
* Modeled the assembly using Pro-Engineer (v 2000 i2).
Tools: Pro-Engineer

3) Design and analysis of periodic shaft for gear mesh vibration control
* Performed literature survey in this field.
* Developed a MatLab code for the uniform shaft and periodic shaft using finite element techniques and observed 20% attenuation in the vibration response at the bearing supports due to periodicity.
* Modeled and analyzed a periodic shaft using ANSYS to validate the results.
Tools: ANSYS, MatLab

4) Modal analysis of rotor.
* Calibrated the hammer, selected and located the sensors to complete the set-up for the test.
* Collected response data for impact testing of unbalanced rotor using UC- X-Modal software
* Measured SIMO responses using HP- FFT VXI Analyzer
* Tracked order using MAP Demo (UC –SDRL) software
* Generated the report and presented the results in front of 60 people.
Tools: Xmodal, Mapdemo, MRIT.

COMPUTER SKILLS:
Platforms: Windows 95/98/2000/NT/ME/XP
Programming Languages: C, C++, MatLab, HTML
Application Software: PRO-E, I-DEAS (certificate course at UGS, Milford, Ohio), FEMB, ANSYS, Nastran, AutoCAD, M.S Office

AVAILABILITY/ RELOCATION:
* Available to work full time within two weeks.
* Willing to relocate anywhere in United States.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 5851 to 5900 of 6411)

Go to Search Parameters...

Brief Description

Project Engineer Automation Controls Instrumentation PMP Certified 9+Years exp Plant Automation PLC SCADA DCS Project Manager CAP

Free! Lead Electrial Planner, Safety & Environmental Manager, QA Manager

Capable working with minimum supervision as solids control and drilling waste management eng, Mechanical skill, computer and management.

Welltest, Snior Operator, Supervisor. 5 years experience. Worked Worldwide.

Experienced Electrical Superintendent seeking employment within the Australian construction industry, where hopefully my varied knowledge and experience can make a positive contribution to any prospective employers and also where I can continue to further develop myself within the business.

Project Engineer wit BSc of Chemical Engineering and experiences in oil and gas

M.Eng graduate engineer, over 6 years international experience in contract management / procurement and project controls for multi disciplinary oil / gas / LNG projects in Asia and Africa, with contractors and operators

Perform concurrent duties of a project manager which involve the management of several Aramco and non Aramco projects in close coordination with the client and/or his representatives and with the engineering design team

Mechanical Engineer with proficiency in IDEAS, Nastran

A dynamic accomplished Information Technology Professional with unique combination of experience in Networking and Hardware. Strong Analytical, Organizational and problem solving skills. Ability to identify Operational Deficiencies, skilled in applying Technology and Administration practices to impr

Mechanical engineering finite element analysis composites ansys Master's

3 Years of experience in Substation Automation field. Worked with Areva, ABB, Siemens & GE systems.

Time served pipefitter with 12 years experience.

PLANNER SMELTER

Very good exp on Document MAnagement, Administration and Trouble shooting.

Automation, Control, Electrical, Instrument, Field service engineer

Mud engineer/ mechanical engineer/ hse advisor/ compliance and standard/ maintenance supervisor/ general inspector and supervisor

I completed my Master in Business Administration, and have more than eight years working experience in the mining industry.

AutoCad Mechanical Desktop AutoCad Inventor 3D Modeler

PDMS-11.6, PDS-7.1, Autocad-2006, CAEPIPE 5.11, Pro-E Wildfire2.0

Handled operations Batch Chemical Processes, Fermentation, Distillation, Extraction, Evaporation, Plant Utility Section, Pumps & Compresors, Safety of 3M's and Housekeeping, Maintenance & Overhaul of Operations, Troubleshooting, Startup & Shutdown of the operations in the cGMP environment etc.

Operations, Technical, Leadership, Surface, Underground, & International Experience

analyst

Skills summary: Gas and Oil Separation Plant (GOSP), Produced Water Treatment Plants, Installation of diesel Engine Power plants, Mechanical construction works such as Piping, tanks, Ducting, structurals, etc.

Bachelor of Engineering (Electronics & Communication) ,A.I.V.,A.M.I.E.

P&PCM, MBA, B.Arch

I am holding Diploma in Electrical engineering. In total have 7years of experience, 2.5years in Enginnering Industry and 4.5 years in Cement Industry

7.5 Technical experience, guidance and command in all analytical and environmental based activities, services, management and techniques.

Degreed Electrical Engineer with Pro/E Wildfire 2.0 and Pro/Cabling training

Analytical: Good use of both traditional `wet’ chemistry and modern instrumentation techniques such as HPLC, GC, FTIR, ICP, MS etc. Broad knowledge of oilfield chemicals and their chemistries, mode of action, active constituents and formulations. Good understanding of statistical quality control

I did both undergrad and master's in mechanical engineering with broad range of experiance both in mechanical engineering along with IT

I am a Coiled Tubing Engineer and Supervisor. I have worked both on and offshore for Schlumberger and Halliburton in various parts of the world over the past 5 years and have a very good track record.

IIT Graduate - SAP Implementation Exp - 2 yrs

Piping, PDS, PDMS, PSDS Designer Over 9 years experience in the field of Mechanical, Piping Engineering Design / Drafting and Construction. A variety of successful projects for power, industrial, chemical, petrochemical, oil & gas, refinery, pharmaceutical and cement plants.

Operations Supervisor

AUTOCAD, HYSYS (PROCESS SIMULATION AND MODELING), H.S.E COMPETENCE PROFICIENCY (SPDC AND NISP), BACHELORS DEGREE IN CHEMICAL ENGINEERING- SECOND CLASS UPPER DIVISION.

Pre-Commissioning of pipelines, Decommissioning Platforms GOM, Project Management

As shown in my resume, i have a bit of experience in Petroleum Refinery and as a chemical engineer, my strongest areas are in Process engineering calculations, Process control, Material and energy balance calcultions and knowledgable in economics and Business areas of petroleum production.

Electrical Engineering, Computer Hardware, Quality Assurance/Quality Control, CMMS

A dynamic professional with over 10 year of experience in Project Planning, Cost Control, Estimation, Quantity Surveying, Co-ordination and execution of MEI&P Projects. Proficient in Primavera Project Planner V3.1 & 6.0, Office XP/2000 and In-house soft wares for Client / Sub-contractor Billing

Electrical Engineer

Installation, calibration and maintanence of mudlogging sensors. Entire Mulogging services, drill cutting collection, identification and description, identification of over pressure zones

Passed Bachelor of Engineering in 2002 and then completed my MBA. I am working as a senior design engineer in Instrumentation & automation field of Larsen & Toubro Limited organisation.

Management Graduate with Bachelors in mining engineering, excellent knowledge of SAP, Internet, Microsoft office etc. Sales in Oil and Gas, Energy sector, Training Expert. Good experience of handling people.

Bachelor degree of Business Administration graduate and very well know MS - Office, other computer languages also.

A hands on Mechanical Supervisor/ Team Leader, with managerial and technical experience, specialising in Rotating Equipment. A total of 20 years spent working for Dresser Rand in the energy conversion business. Additionally, considerable experience in training all levels of the workforce and mgmt.

A fully qualified GIS specialist with experience in the delivery of major asset management projects. Adaptable to business requirements, with management experience. Well versed in the use of ESRI ArcGIS 9.1, WINGS 2.4.10, AutoCAD 2008, Corel Paint Shop Pro XI. IT literate.

E-Business,E-Tendering,International Business Development

Desired employment / Occupational field Financial & Economic / Project Analyst

FELONY conviction disclosure! Experienced metrologist, industrial electronics repair, computer/network systems analyst looking to reenter tech industry.

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 [ 118 ] 119 120 121 122 123 124 125 126 127 128 129 Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out