Resume - Self-motivated young competent Mechanical Engineer with nine years experience wi...

Misco Jobs

Resume #26939

CONTACT INFORMATION:
View contact information...

OBJECTIVE
To get a challenging, full-time senior level position in a dynamic organization, in the Mechanical industry, utilizing my ability to work as team member and contribute to support. Where I can effectively put to use my qualifications, experience and skills.

PROFESSIONAL EXPERIENCE (nine Years)
Senior Engineer- Since February 2004 to till date
Punj Lloyd Limited.

Project working on: MP Gas compressor for offshore facilities, Kalimantan timur, Indonesia.
Pt. Punj lloyd Indonesia/Mp Gas Compression Facility for Total E & P Indonesie at Senipah, East Kalimantan, Indonesia/ Piping Engineer Manage the fabrication, erection and pre-commissioning of complete piping activity in the project.

Mechanical Executive – From August 2000 to January 2004
Larsen & Toubro Limited Gr. II Project.

Project working for: SBAF Project, BPCL, Mumbai (Cap. 2 x 70 TPD)
Working as a Lead Piping Engineer for Sulpher Recovery Unit (Refinery modernization project) in BPCL Refinery, Mumbai. The job is including total Piping & Mechanical works for SRU/ARU/SWS I & II & FGTU. Plant for SRU.

Project working for: SDU Project, IOCL (AOD) Digboi (Cap. 0.33 MMTPA)
Working for Solvent De-Waxing Unit Project Site at IOCL Digboi as a lead engineer piping execution to expedite the piping execution, which was on the critical path in view of the time and site constraints. Digboi was a tough site
Where Construction was first time being directly supervised by Gr. II Projects and also because of its geographical constraints.
Spearheaded piping execution, with a team of only 4 piping engineers including myself, to get back the control over the piping erection and mechanical completion and hydro testing. I was involved in day-to-day monitoring and planning of hydro test loops and also liquidation of technical audit and other checklists in close coordination with client and PMC.
Assisted the process engineer in setting up of the procedure for the piping and equipment clearances for pre commissioning. Also assisted process team for various checklist liquidation and speeding up of flushing and boxing up activities.

Mechanical Engineer – From April 2000 to July 2000
Mukand Engineers Limited

Project working for: LPG Recovery Project
Working for LPG Recovery Project Site at LPG Recovery Project in GAIL Gandhar (Gujarat). The job is including total Piping & Mechanical works for Regeneration gas Heater for LPG I was involved in Fabrication, Erection & Alignment of Radiant shell, Convection section, Arch plate, End tube sheet, Stack cone & Coils.

Piping Engineer – From July 1998 to March 2000.
Larsen & Toubro Limited Gr II Projects

Project Working for: Hydrogen Unit (Cap. 25000 NM3/Hr.)
Working for Hydrogen Unit Project Site at IOCL Baroda as a engineer Piping execution to expedite the piping execution, I was Involved in Following activities v Execution & monitoring works in Piping v Involvement of 100,000-Inch dia welding and 15,000-Inch Meter U/G Under ground systems up to 16" (with the following of Wrapping Coating),
Erection of Pigtail tube & catalyst tube.
- Pre–fabrication and Erection of Piping in Process, Utilities & Fire fighting.
Following & studying of GAD's, Isometrics & P & ID's in the process Area.
Mechanical Completion of Works Inspected by EIL Standards.
- Involvement of Painting, Insulation & Hydrotesting of Piping Loops as per EIL Standards v Pre-commissioning Activities of Flushing of Piping Systems & Charging of Utilities.
- Reconciliation of Piping Material including field Measurement of works
Handing over of Spare & Surplus Material and Correlation with client.

ASST. ENGINEER – From July 1996 to April 1998.
Apex Electicals Limited (Baroda)

Working For: Shop Fabrication
Working as a Asst. Engineer with M/s Apex Electricals Limited. (ISO 9000 organization) in Baroda (Gujarat). The job is including total Fabrication of Transformer Tanks & Vacuum test of Tanks.

IMPORTANT JOB HANDLED
- Piping Pre fabrication, erection, testing & Pre-Commissioning of Hydrogen Unit for IOCL Baroda v Fabrication & Erection of Regeneration of Gas Heater for GAIL Gandhar.
- Piping Pre fabrication, erection, testing & Pre-Commissioning of Solvent De-waxing Unit for IOCL (AOD) Digboi.

Responsibilities held in construction and contracting firm.
Execution of projects right from conception stage till handing over in a professional and systematic manner.

- Invoicing/contractor invoice clearing.
- We shall also prepare erection procedures for submission/approval to Customer and for implementations by sub-contractors for important activities v The entire plant may be split into sub-systems. He shall intimate to the Customer as and when the sub-systems are mechanically completed for his punch listing and arrange for liquidation of the same.
- On completion of the pre-commissioning, We shall intimate to the Customer about his readiness for commissioning of the plant and obtain Mechanical Completion Certificates as per the conditions of the Contract.

- Coordinating the construction activities and Progress Monitoring by day-to-day interaction with Customer/ Consultant, Engineering Office and Construction Sub-Contractors.
- Finalization of Milestones in Construction Billing Schedule for LSTK Projects and Invoicing based on the same.

OTHER FIELD EXPIRIENCE
- Fully supervised the Installation of Catalyst tube & Hair Pin tube Supporting Grids of Naphtha Reformer, As part of Hydrogen Unit in IOCL Baroda.
- Preparation of QAP, Job procedures and Inspection test plans as per specification and Bid requirements and documentation accordingly.
- Familiar with WPS & PQR
- Involved in the Pre commissioning activities of Solvent De-waxing Unit of IOCL Digboi Refinery & Hydrogen unit of IOCL Baroda Refinery v Familiar with Codes like ASME SEC IX, ASME SEC II, ANSI B 31.3, API 650 and EIL Specifications regarding Piping, Welding, Material, Surface preparation & Painting, Hot & Cold Insulation, Jacketed Piping, Steam tracing, Storage Tank Fabrication, etc

FINAL DOCUMENTATION
Marking of site changes in drawings, documents and sending the markup to Engineering for as built document, Marking up includes layout drawing.

OTHER SKILLS
Possess sound knowledge of computer. Working knowledge of Excel, AutoCAD-2000 and other related day-today office Software Programs. Worked with Windows 98, Office 2000.

EDUCATIONAL QUALIFICATION
Diploma in Mechanical Engineering

Professional Qualification
Training in AutoCAD 2000 from Unique CAD Centre
Safety Training for Lifting workshop level 3

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 4301 to 4350 of 6411)

Go to Search Parameters...

Brief Description

EOM Steam Turbine Testing Supervisor, Worldwide Co. Service Rep, Schedule, Plan, Assign Personel, Execute, Document, Vibration/Temperature Analysis- Install, Commission, Overhaul- Generator, Switchgear, Pump, Gear, Compressor, Expansion Turbine, Electronics, Telemetry, Condenser, Boiler, Superheater

I’m a Geoscientist with over 5 years of experience in the areas of: Seismic Exploration and Operations and Subsurface Geology in the field of Oil and Gas Exploration. I have master’s degree in Geophysics (Seismology) and Bachelor’s degree in Geology.

Drilling & work Over Supervisor, Master degree, 5 years experience in Offshore & Onshore operations

Maintenance Engineer

Total experience of 5 years in industrial sector which includes refineries and valve manufacturing companies.

I’ve worked offshore in the South Pars gas reservoir in Iran as a Drilling and Production Engineer on board the Sagadril-2 /SPD-10 & Sagadril-1 /SPD-11

Bs.D Qualified Mechanical Egnineer Experienced in Piping and Pipeline Construction and Precommissioning

Senior Telecoms Technician, radio, satellite, rigger, cisco, networking, cabling, management, hf, vhf, uhf, microwave, tracking, it skills, wireless

5 years of experience as Drilling Engineer for Major Operator company in Denmark (North Sea Project) and as Drilling Supervisor for operator company in Turkmenistan.

PETROLEUM ENGINEER WITH 6 YEARS EXPERIENCE IN DRILLING, COMPLETION AND WORKOVER

16 years exp. in Design/Drafting, Softwares AutoCad 2004, Microstation J/V8, IRASB, AutoCad Overlay, HVAC system layouts Duct layouts, Equip,Layouts, Utility/Fire prot.sys layouts,Steel Structural detail drgs, Familiar in Int.stands.Exp.in High Rise, Industrial/Commercial Bldgs, Housing, Airports

Electrical engineer with experience in oil field electrical construction works. Possess IRCA cerification for Quality Management System and MS project and autocad 2000 certification

CERTIFIED WELDING INSPECTOR, ASNT LEVEL II IN UT,PT, MPT, WORKED IN SAUDI ARABIA, QATAR IN CONSTRUCTION AND SHUTDOWN PROJECTS - OIL AND GAS.

Chemical Engineer with experience in production with a reputed Petrochemical industry as Engineer (Production). Responsible for operation and maintenance of Production section which includes a Hydrogen plant using Catalytic steam reforming process and an Auto-oxidation plant for peroxide.

HSE-Process Safety Manager/Specialist with wide experience of petrochemicals HSE management, PSM (Process Safety Management) including Permit to Work, Accident Investigation, etc., Environmental Management System/ISO 14001 implementation, Capital Projects Safety, Environment, and Fire protection

Commissioning, Testing and Maintenance of Generators, static excitation system , Protective Relays, 220kv Switchyard, Power Transformers, 6.6kv Switch Gear 415v Switchgear, 415VMCC

A B.Eng. degree, 2nd class honours (upper division) in Civil Engineering. He has worked with several copamies since his graduation and has acquired experience in his field of study. He is a good team player, honest, hard working and timely.

I'v the pleasure to present my c.v to all your respected well known organizations

An Oil And Gas Professional with an experience in handling technical and experience to coordinate with all related and responsible departments relating and involving to plants¡¦ operation and performance , to provide technical , service and commercial support to customers and end ¡V user¡¦s

Seismic Data Processing (Up to PSTM, using Promaxtm &Vistatm),Quality control of Seismic Data Acquisition (using Promaxtm & Vistatm).

Interested in knowing available oppurtunities awaiting.

Licensed Land Surveyor 27 years experience

Ten years working experience in the oil and gas industry, dispensing the role of QA / QC Inspector for Piping, Pipelines, Pressure Vessels, Steel Structures and Welding from fabrication and installation to pre-commissioning of oil production facilities, oil refineries, natural gas plants etc.

Principal/Lead Mechanical Engineer; Specialist consultant for rotating equipment; FEED, DBM and detail engineering in EPC; Pumps, Compressors and Turbines. Oil & Gas, Petrochemical, Municipal, Energy, Offshore / Marine

21 Years Experience in EPC/LSTK Project estimation, proposal, marketing, planning, project procurement and project management for Refinery, Petrochemicals and Fertilizer Plants like Ammonia, naphtha Cracker, PTA, Hydrocracker, DHDT, Sulphur and other units. Presently working with L&T, india.

Software analyst, Engineer (Piping Design)

I have beenb graduated from electrical and electronic enginnering and then joining Schlumberger as cementing field engineer for three years promoted three times

I have been in the electrical utility business for over 20 years,and have experience with gas and steam turbines.Frame 7FA/Frame 5 L/M.I am looking to relocate to a position in Northen Wisconsin/Northern Minnesota.

Chemical engineer, skilled in water treatment

Analytical, Satisfied by customer servicing and their satisfaction, team member.

Postgraduate in Ocean Engineering looking for postion in offshore and coastal engineering organisation

Mechanical Superintendent.

Seeking a position of responsibilities, Dynamic Challenges and opportunities for Professional Advancement in rapidly growing Competition in the field of Chemical Engineer.

B.sc Mechanical engineer having 3 years experience in multinational petrochemical company as a process engineer since 01 sept 2000 till date

6 years experience as a CAD Drafter/Designer in Electrical & Civil Engineering, specializing in AutoCAD and Microstation. Also have a second Associates Degree in Computer Information Management Systems.

I have completed my degree in BEng Hons in Mechanical Engineering and working in Dadabhoy Cement industries Limited. I am looking for jobs in Oil & Gas sector

C.V.

INSTRUMENTATION ENGINEER, having completed B.E in Instrumentation and Electronics, and Diploma in Instrumentation Technology, with overall experience of 3years, looking for a challenging and rewarding career.

I am Mechanical Engineer with first class career record. I have more than 5 years working experience in large power plant operation and maintenance. I have Boiler proficiency certificate issued by state government of India.

project management.contract management,business management.

4th Class Power Engineering Certificate and 3rd Class Power Engineening Part A1-A2

Seeking Employment in Oil and Gas Industry

By profession I am Mechanical Engineer. Presently working as a HSE ADVISOR with an Australian Organisation BHP BILLITON PETROLEUM PTY LTD at ZAMZAMA GAS PLANT Pakistan. I have done various HSE Courses including NEBOSH Certification from UK.

Gas turbine systems technician

Total of 5years experience in Quality control, Welding, Heat treatment & NDT field a QC in EPC sector

Project enginer with 5 yrs experiece

Self-motivated young competent Mechanical Engineer with nine years experience with Oil companies and leading construction and contracting firms. Have proficiency in independent project execution. Possessing a Diploma in Mechanical Engineering. Able to independently plan, and execute Projects related

Microstation CADD Civil Engineer Utilities Specialist and GIS

A Mechanical Engineer with Masters Degree in Quality Assurance Technology (M.tech).IRCA certified QMS Lead Auditor; ISO 9001:2000, ASNT Level II in RI,MT & PT NDT techniques. Around 20 years professional experience in Manufacturing, Planning and QA/QC disciplines.

Mechanical Engineering Technician, MS Project, Premavera, Auto-CAD, SAP, Microstation, Planning , Maintenance

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 [ 87 ] 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out