Resume - I have successfully completed innumerable complex and difficult Tasks/projects a...

Misco Jobs

Resume #26976

CONTACT INFORMATION:
View contact information...

OBJECTIVE
I am a very hard working Executive and an excellent decision maker and have successfully completed innumerable Tasks/projects which are either abandoned or not taken-up due to their complex nature and high-risk factor by adopting methods not tried earlier with immense benefit to the company, I am at present working for. I can shoulder still higher responsibility to bring any company to heights untouched earlier which is otherwise impossible to achieve by conventional means.

SUMMARY
- Empannelled by United Nations as one of the expert (view www.google.co.in search MM Hazarika)
- Strong knowledge of all oil field related jobs.
- Exposure to project management and strong administrative jobs.
- Looking for an opportunity to design a new generation of bits but commited to my son to develop.
- An expert on oil field drilling and work over operation.
- Over 30 yrs of experience on various jobs relating to completing jobs which otherwise impossible to achieve by conventional methods

EXPERIENCE
1971–1973 M/s United Engineers Sibsagar
Design Engineer
- My main job to design pre-fabricated steel structures, M/s Staging etc.
- Including general maintenance and repairing of all types of Machinery.

1973–1975 Oil India Limited(Ex-BOC) Dibrugarh
Trainee Drilling Engineer
- Within 3 months of my training I was selected to take independent charge of both Drilling & Workover wells out of the whole batch of trainee.
- Confirmed in the post of Drilling / Workover engineer in the year 1975.

1975-1978: Oil India Limited (Ex-BOC) Dibrugarh
Drilling Engineer
Mainly exposed to exploratory Drilling wells and critical work-over wells.
Achievement: Highly successful in seeing various problems from angles not seen earlier.

1978–1982 Oil India Limited(EX-BOC) Dibrugarh
Senior Engineer (Drilling)
- Permoted to the post of Sr. Engineer(Drilling) w.e.f. 18-05-1978.
- Mainly exposed to exploration drilling & critical Work-over wells.
- Transferred to the position of Sr. Engineer(Drilling)- equipment for about six months.
- Transferred to the position of 'Techinical Control / Operation Officer', a rank in management group w.e.f. 24/10/1980 and hold the position for 2 years.
Achievement: Brought down overtime of the entire organization to half. Pumping of crude oil to various refineries resumed following long shut down due to Assam agitation to save the Company from a imminent collapse. The identity was restored.
Suptdg. Engineer (Drilling)
- Promoted to the post of suptdg. Engineer (Drilling) w.e.f. 30/08/1982.
I have been credited with the following during my tenure as Suptdg. Engineer (Drilling).
- Saved at least 15 rig days at each well drilled under my supervision.
- Did the fastest ever achieved (6 days) rig move of BHEL-E-1400 rig with limited man power.
- Completed drilling to a depth of 3300m just only in 17½ days with BHEL-E-1400 rig which is a record.
- Introduced many modifications to BHEL-E-1400 AC/ACR rigs for elimination break downs.
- Successfully completed a complex casing patch job using a new technique.
- Associated myself in drilling the deepest well of OIL.
- Successfully completed number of abandoned wells.
- Tackled number of Blow-outs successfully under my direction.
- Unlimited number of Fishing jobs successfully completed under my direction.
- Worked in offshore rig (deep water) "PETREL" in western Andaman as a 'Drilling Supervisor" for a short period when the well was in a critical stage and was about to be abandoned in 1985-86. The well was later drilled to its targeted depth successfully.
- When the company unable to exploit the newly discovered find at Bagapani even with the help of district authorities and two rigs remained idle, self overcome the situation in favour of the company by winning the locals of their rightful demands.
- Lunched use of Journal bearing bits in India.
- Introduced underbalanced drilling in OIL.
Dy. Chief Engineer (Drilling)
Promoted to the post of Dy. Chief Engineer (Drilling), Rajasthan Project on 23/12/89.
- Over-all head of Planning Section.
- To draw-out tender documents (NIT) for all types of Onshore rigs and its associated services and evaluation of offers.
- Preparation of various contract documents connected with OIL well drilling.
- Keeping contracts with DGH, CC Clearance committees, World Bank officials for Planning purposes of the Project.
- Simultaneously holding the post of Manager (Mines).
- Over-all in-charge of all Drilling and Workover operations being carried out by M/s. OIL INDIA LIMITED, in Thar Desert.
Achievement: 1) Established the field at 'Rajasthan Project' which was unable to explore even by renowned international companies due to complexity of the field. Challenge over-come with better ideas never thought of earlier single handedly.
M/s Enron earning profit on their Kharsang field, Assam which was loss making one against the background that the option was rejected by their counterpart with full back-up from geological & production set-up at U.S.A. but overpowered during discussions held at their Delhi office on offering alternate methods of production by me, an idea given on individual capacity.
2) Experimented use of PDC bits for use in our Assam field which were failures in all attempts made by individual companies to sale their products and successfully transffered the technique to Assam saving valuable rig time and cost.

Chief Manager(Project)
Promoted to the post of Chief Manager(Project) w.e.f 01/01/98.
- Over-all Administration and its timely execution of the Project (GVP) which is being carried out most meticulously.
- Completed the project with utmost austerity. Saved approx. Rs.10 crores from the estimated cost of Rs.55.00 crores for the Project(ONGCL incurred @ 200 Cr.).
- Successfully completed a complicated fishing operation with a modified tool in the deepest well drilled at Ganga-valley(Loc.GKBA).
- Entire drilling operation is handled single handedly.
Achievement: 1) All actions towards Administrative and Technical aspects carried out in a way never experimented earlier most successfully saving hundred of cores of rupees to the organization with a set-up which was 1/5th of the general manpower requirement for executing such a huge project.
2) When unable to proceed with the project work to drill a lone well(Location GKBA), the project faced imminent shut down due to Naxalite activities, self overcome all odds under gunpoint.

EDUCATION

TRAINING
- Passed Higher Secondary School Leaving Certificate Examination from Sibsagar Government Higher Secondary & Multipurpose School in the year 1966.
- Obtained B.E. (Mechanical) Degree from Jorhat Engineering College under Dibrugarh University with 64% marks in aggregate in the year 1971.

- Took a course in "Advance Drilling Technology" by
P. Moore, USA.
- Took another course on "Drilling Technology" in
DPTC, Aberdeen, UK for 2 months.
- Took a course on Human Resource Development in
Administrative Staff College, Hyderabad,India.

PAPER WRITTEN/PUBLISHED
Authored three technical papers on the following subjects.
- A new technique of casing patch-up (SPE 17017).
- Effect on penetration rate by blanking-off a nozzle in a tricone bit (SPE 17016).
- How a better rate of penetration can be achieved by blanking-off a nozzle in a tricone bit (SPE 17102).
- A number of papers written recently yet to be published.

MEMBERSHIP APPRECIATION
- SPE, WWF (India), Member (Life) Administrative Staff College, Bella Vista.
- Selected for the SPE Membership Development award for 1990.
- Selected as one of the experts in Drilling Technology by Citizen Ambassador Programme, a foundation headed by President of USA as its Chairman to represent a World Body.
- A member of Technical group (S.P.E.) and Internationally addressing problems being faced by the Drilling Industry, which cover all subjects connected with Administration and highly Technical aspects over networking.

- During my over thirty years of service in OIL INDIA LIMITED from 1973 till date, I have gathered sufficient experience in both technical/ field as well as administrative jobs. Throughout my stay in OIL. I have discharged my duties to the satisfaction of all and received appreciation including Cash Awards for my contribution to the Company.

PERSONS FOR REFERENCE
Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 901 to 950 of 7051)

Go to Search Parameters...

Brief Description

Senior Structural Engineer with 13 years experience - Offshore with SACS & StruCAD*3D, Onshore (refinery) with STAAD.Pro

SCADA and Automation and I&C Engineer

Mechanical Engineer with18 years experience to projects/plant maintenance (rotating/static equipment)in Oil & Gas-7 years, chemical/petrochemical-8 years and food process-utilities maint.-3 years.

I am an Instrumentation Engineer, having 15.5 years of experience in the field of instrumentation from Project execution to maintenance in Refinery and Petrochemical Industries. Having work experience in SAP R/3 plant maintenance module (PM) to carry out day to day maintenance.

I have 15 years experience in Oil and Gas Industries as Electrical Maintenance supervisor, 5 years an Electrical Commissioning Supervisor, 5 years in Electrical construction and hook up and 5 years at the Electrical Workshop.

11+ years experience (10 years with Landmark, 1+ years with Schlumberger) as G&G consultant worked on OpenWorks, GeoFrame, Petrel suite of applications. Currently working with Schlumberger helping clients in Petrel and GeoFrame workflows, presenting new features & updates, Petrel Testing & Training

Experienced in gas lift design, well optimization, nodal analysis, well integrity, surveillance techniques, trouble shooting, water shut-off, formation damage evaluation and treatment, interpretation of production logging , PVT & multiphase flow, water injection project, and witness rigless operati

Engineering Manager, Project Manager, Engineering Specialist

Actively seeking a position in „o PROJECT ENGINEER „o With an organization needing a professional demonstrating ability in providing consistent, cost effective methods improving quality of products while meeting best engineering practices

1. Oil and gas EPC experience for four years. 2. Design and engineering of static equipment. 3. 10 plus years' experience in mining industry. 4. Expertise in maintenance of static, rotating and utility systems. 5. Bachelor's degree in Mechanical Engineering and Master's degree in Maintenance Mgmt.

Chief Engineer STCW95 unlimited with Master's Degree. Experience on drillships, AHTS, tugs, etc. Ability to manage all engineering operations on board the drilling vessel to ensure proper operation and maintenance of propulsion machinery, drilling equipment and others whilst at sea and in port.

Project engineering and management, electrical and process engineering, project cost control and schedule, business development, power generation equipment, Russian speaking, technical translations, oil & gas, minerals and metals, FEED (front-end engineering design)

A qualified and experienced valves, piping and vessels engineer who is looking to return to mainstream engineering applications ideally as a contractor working overseas. Knowledgeable in the design and manufacturing of pressure vessels and pipework as well as valves/controls used in pressurised

A dynamic professional with more than 24 years of rich experience in Marketing, Sales, Business Development, Planning, Procurement, Process improvement, Manufacturing and Man Management.

Instrument and Control Systems Engineer, WorleyParsons, Qatar

Field operations and producing technology, Workover & Completion, Production Optimization, Water Flooding, Well Test Design and Interpretation, Artifial Lift Design and montoring, Well Planning and Development drilling, Strong software skills

8 year experience in materials, corrosion, thermal insulation and piping for the oil and gas industry, including FPSO’s, Offshore production platforms, Offshore offloading buoys, Onshore plants, LNG terminals.

A result-oriented professional with nearly 14 years experience in Piping Design, Operation & Maintenance, Quality Assurance and Relationship Management. Handled a varie

I am a Chemical Engineer and have a master's in Heavy Crude Oil Refining. i also have a master's in Work Health and Safety. I have extensive experience in Oil Refineries in the Construction and Maintenance of new plants. i am willing to travel.

SEASONED MAINTENANCE AND PROJECT MGMT. PROFESSIONAL

Senior Drilling Engineer

8 years' experience in petroleum refining; process modeling; profitability studies; production planning; LP (linear programming); PIMS; HYSYS; Petro-SIM; CrudeManager; Spyro; ProcessBook; DataLink; MS Office; M.Sc. in chemical engineering (specialized in petroleum processing)

Workover & completion supervisor

Over 20 years of experience in Plant Operations or Maintenance.

I possess over 15 years’ of experience in Project Management, Instrumentation & Automation, Operations & Maintenance, Installation & Commissioning and Man Management.

Instrumentation Engineer with 12 years experience of Instrumentation & control scope of project engineering and plant maintenance in Oil & gas,petrochemical and chemical industry.

A Design Specialist responsible for managing the setup, standards, training, design-team leadership, and coordination of Intelligent Data-centric CAD work within multiple offices and Engineering disciplines, both domestic and international. P&IDs, Piping, Smartplant, SPPID

Chemical engineer having more than 12 yrs. experience in petochemical in operation and design consultancy.Also having experience in precommissioning and commissionig of petrochemical plants.

Instrument Engineer/Inspector

Business owner, aerospace mechanical engineer, U.S. Navy military veteran.

More than 7 years experienced engineers with a PHD degree in technical construction can conduct strike-calculations and dimensioning of onshore marine constructions for oil and gas production. Skillfully use software like LS-DYNA, MARC, SESAM etc for the structural analysis.

Maintenance, Construction, commissioning for Refineries, FPSO, Offshore Platforms etc.

I am a dedicated professional who understands the importance of retaining accounts. My ability to get the job done, including quickly and accurately diagnosing and troubleshooting technical problems, has solidified the loyalty of numerous clients. I assure you, these factors, as well as the skills i

PDMS piping designer. PDMS modul design, draft, izodraft. Layout drawings and ISO sketch. Expeience in: piping design for power plants, Steam turbines, compressor plants, support design for chemical industry and refinery

I am actually working on behalf of ExxonMobil refinery in France as a system and network engineer. I have a good experience in control systems (PLC and DCs based systems) as well as in SCADA supervisory. You can find enclosed my CV with a brief description of my skills.

Worked as Material Engineer for Saudi Aramco Material Standardization Division for Equipment Spare Parts Cataloguing Project. Proficient in using SAP R/3, MACs, UNIX and ESP4.

Welding Engineer Specialist

Wellhead, X'mas Tree, Valves, Operations

Worked in Gas Dehydration, Well head, Gas Swetling, Utility & Tank Form& LPG Plants

28 YEARS OF EXPERIENCE IN ENGINEERING RELATED DESIGN AND CHECKING OF MAJOR PETROCHEMICAL, NUCLEAR, REFINERY, INDUSTRIAL AND COMMERCIAL FACILITIES UTILIZING AUTOCAD, MICROSTATION, PDS FRAMEWORKS, SMART PLANT REVIEW, TRIFORMA & BENTLEY NAVIGATOR,. WORKED ON A VARIETY OF DOMESTIC AND INTERNATIONAL PROJ

20 yrs piping detail engineering in Petrochemical/Oil and Gas / Offshore with multinational EPC companies.

Process Operations Superintendent

Team leader for Well Engineers, using probabilistic casing design & stress check software in order to design and write drilling & completion programs for deep HP/HT wells. Contract holder for drilling contractor and also active with VAR’s, WDP & other Shell initiatives.

I want drilling supervisor/Rig superintendent job

I have successfully completed innumerable complex and difficult Tasks/projects at minimum cost. At present I am working on a ‘Project’ namely ‘Rajiv cum Bush effect’ with my son (Computer Student) to revolutionize method of Production of Bits which has immense commercial value.

Over 12 years experience in oil and gas industry

As drilling fluids engineer, my experience covers a wide range of mud engineering aspect : to control the running of the mud system on the rig accordance with the operator’s requirements and in a safe manner, to ensure there are sufficent quantities of the correct materials to meet these requirement

13 years experience in oil, gas and petrochemical industrial dealing with installation, inspection, maintenance, troubleshooting and overhauling for rotating as gas turbines, compressors, pumps, gas & diesel engines, air fan cooler and heat exchangers in international companies at Egypt, Saudi Arabi

Mechanical engineer with fourteen years of international experience in engineering, consulting and construction. Extensive background with plant conceptual studies and detailed engineering in Oil & Gas industry. Expertise in designing of Pressure Vessels, Heat Exchangers, Storage Tanks

PDMS Designer with FPSO & Offshore exprience

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 [ 19 ] 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out