Resume - I have diploma with 20 years experience in construction/maintenance. 10 years in...

Misco Jobs

Resume #27553

CONTACT INFORMATION:
View contact information...

OBJECTIVE:
Position as Electrical Technician in Oil & Gas field or processing plant where my experience, training and qualification will be an asset to your company.

EMPLOYMENT HISTORY

RUWAIS REFINERY (Takreer) Abu Dhabi 10/1998 – to present.
Working in the Electrical Maintenance Department as Electrical Technician through M/s IMECO.

Carryout daily inspection of substation equipments, transformers and motors, Electrical Operation, routine Preventive/Predictive Maintenance, Modification, Faultfinding, diagnosis, repair defects; make required tests in various electrical equipments and control circuits, HV/MV/LV Equipments and cables. Make survey of materials and spare parts to do modification activities. Maintain proper records for inspection/tests daily log books etc.

The related work on the equipments carry out based on specific standards and codes of practice are in the Condensate Processing plant and in Refinery Utility Plant are as follows.

Transformers (Different makes 33kv/11kv, 33kv/3.3kv, 11kv/3.3kv/11kv/415v)

Switchgears and protection system (sf6, vaccum, acb and mocb- ABB sace, Calor Emag, Merlin gerin, Terasaki, Seimens etc)

HV and LV Motors and starters, also with differential and partial discharge protections.

Substation Equipments and Power Distribution Systems of 415v, 3300v, 11kv, 33kv

DC/AC UPS and Battery chargers (Gutur, Chloride)

Battery Banks

Emergency Diesel Generators (Operation and maintenance)

Motor/Feeder Managers relays (G.E. MULTILIN 750,745,469,269),

Switchgear and Instrumentation Relays For motors (MM III, MM 5m)

Integrated protection and control system for power distribution net work in the processing plants

Plant lighting and plant earthing systems etc.

Presently witness in the ULG/LSGO Project pre-commissioning / commissioning and start up activities with the main contractors and vendors. Loop checking of DCS and ESD and all functional tests of electrical equipments as part of pre commissioning.

Achievements
* Follow up and witness the installation, testing and commissioning job (revamping) of 33KV Bus bar differential protection in refinery utility.
* Assisted the vendor for analysing/overhauling /testing and commissioning of existing MOCB (Calor Emag) 33KV.
* Follow up and witness the installation, testing and commissioning job of 33kv bus bar extension (using bus ducts) and related switchgears for the expansion of existing 33kv substation as part of the condensate processing plant development.

* Follow up and witness testing and commissioning of Is-Limiter 33kv.
Presently involving also in testing and commissioning of switchgears and motor starters with Multilin Relays for 3.3kv and 415v and expansion of power system facilities with respect to the Refinery expansion project.
* Participated in the Warranty Inspection of newly built substations of condensate processing plant/off sites and refinery utility.
Work involves cleaning, inspection /testing of bus bars/switchgear and protection system/ transformers etc after proper section-by-section shut down of each substation bus bars and related incomer/outgoing feeders.

Participated in the major shutdown activities of Hydrocracker/Hydroskimmer
Condensate Processing Plants and Utility Plants at 1998 and 2004.
Work involves cleaning, inspection and testing of bus bars/switchgear and protection system/ transformers etc after proper section-by-section shut down of each substation bus bars and related incomer/outgoing feeders. 33kv/11kv/3.3kv and 415volts systems.
Disconnection and reconnection of Power and Control Cables, Overhauling of Motors, Modification and relocation of electrical accessories, providing temporary power supply and isolation, 24V Hand Lamps and 240V flood lights, A/C Units, Pumps sieving M/C. Conduct test run of electrical M/Cs if required. Maintain proper record, test report etc.

Takreer [Gup], Adgas, Fertil, Zadco(off shore), Gasco Abu Dhabi 12/95 – 10/98

Worked in the Electrical Maintenance Departments as Electrical Technician through M/s IMECO.
Carryout Preventive Maintenance, Modification, and Troubleshooting of Electrical
Equipments (HV/LV), in field and Substations of processing plants. Daily Visual inspection and monitoring of Transformer yards/running Motors/ UPS and Batteries for any abnormalities, attending breakdown activities etc. Attended shutdown activities.

M/s SAUDI LETCO CO, Jeddah, KSA. 7/89 – 9/93

Worked in Construction, testing and commissioning of various electrical Projects of the Company as Electrical Forman.
The Technical work experience consists of Supervising and managing HV/LV construction and Installation of Power Distribution Substations, Testing & Commissioning of Transformers, Motors, Power Cabling, UPS and Battery Banks, MCC, Emergency Generators, ATS, Fire Water Pump and its Control Panels, Lighting System, Earthing System etc. Also Prepare correspondence for daily work scheduling, material invoices, manpower controlling/allocation and Problem solving meeting with senior level staff and consultants etc.

M/s Kolsite Machine Fabrik Ltd Delhi INDIA. 6/83- 4/89 Worked as Service Engineer for the Maintenance of Polyethylene Extrusion Plants. Have Technical Work Experience in Maintenance of Motors and its controls, Thyrister Drives, Power Controls Centre etc.
Kerala State Electricity Board (KSEB) INDIA. 3/81-5/83
Worked as a Trainee Overseer in the Maintenance Division of Kerala State Electricity Board for 11KV Power Distribution Network Systems.

EDUCATION:
Diploma in Electrical Engineering (3Year Course) 1981
Thiagarajar Polytechnic, Alagappanagar, Kerala, India.

Computer SKILLS MS Office, Knowledge of MAXIMO

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1751 to 1800 of 7055)

Go to Search Parameters...

Brief Description

HND , ELECTRICAL/ ELECTRONICS ENGINEERING (Power and Machine Option)

I finish my contract in South Africa as Safety Advisor on “Polaris” Barge (Acergy) for his dry dock. I obtained my master's degree (Engineering and Chemical safety) in 2003. My career really started In 2005 in the off-shore, on the drillship “Pride Angola” where I sailed for 3 years.

I am an instrumentation and automation engineer with over 5 years experience in oil&gas, refinery and petrochemical fields, covering detail design and site installation/ precommissioning/ commissioning activities.

B-Tech in mech with 7.5 years of experience in plant design arena

Eletrical enginer for 8 yrs experince as chief enginer

Civil Structural Engineer

I have near eight years experience in field of piping design of refinery, oil and gas with position as piping lead engineer & assistant manager, furthermore I am fluent PDS, PDMS, Smart Plant Review, Plant Design Review, AutoCad, Microstation, Microsoft office, etc.

weldin inspection

Having a Diploma in Mech. Engg. with 18 years of Experience in Designer

Energetic and productive professional with broad-based experience in Maintenance Planning, Shutdown Planning and Project Management in Line with the Computerized Maintenance Management System.

I have total Twenty-one years hand on working experience in Electrical maint. and operation fields in various organization.

Control Electrical HV &LV equipment and Instrumentation Installation & Test, Cable wiring

Seeking a challenging career as a Reservoir/Petroleum/Production Engineer in an E&P Company

15 years of progressive experience and responsibility with documented success in the areas of drilling, workover, completions, engineering, operations and supervision at various organizational levels. I’m seeking a challenging position as a Drilling &/or Work-over Engineer / Superintendent.

18 years experience in process design of refinery and petrochemical units.

Over 14 Years in Maintenance planning, Shutdown/Turnaround Planning in petrochemical Industries. And also in Maintenance of various Rotating and Static Equipment ;Construction Planning including costing.

A consulting petroleum engineer / project management position in a challenging environment which requires significant technical expertise. Available for immediate travel, domestic or worldwide.

I am a Chemical Engineer having more than 18 years experience in various Oil Processing / Gas Treatment / Petrochemical Process Plants . I have 6 years of Onshore / Offshore Oil / Gas Plants Operational Experience as a Production Supervisor.

Job Title : Software Enginer Education : Ordinary Degree in Bachelor of Science Previous Employer: Motorola Australia Software Centre

Expert in understanding permeability of the carbonate reservoirs. With this help reservoir engineers can do their well level simulation rather easily. Fees are charged for every foot of well data studied. Work will be done at the place of the expert.

More than fourteen years hands-on and supervisory experience in Petroleum Refineries in Qatar, Saudi Arabia and Pakistan. Have been analyzing samples from all streams of different units. Have been acting as Lab. Group Leader during Group Leader's leave/absence.

A well rounded drilling personnel with a unique experience in drilling and completion / work over operations

Over twenty years in plants, and pipeline construction, Inspection and supervision, including several overseas assignments.

Quantity Surveyor/Estimator (Mechanical)

All descriptions of skillsand experiences are listed in resume. I am available to begin work immediately.

Instrumentation Engineer with 15 years of experience in maintenance, teaching and construction

Primavera , MS Project

A self-motivated mechanic with over twenty years worldwide experience, in mechanical/ maintenance engineering’s high-pressure environments; from marine engines, top drive, rotary tables, auxiliaries, hydraulics, and rig upgrades. I am hard working, resourceful and reliable.

Working as Geosteering engineer, meeting with client, collect data, model preparation, landing section, lateral section, steering while drilling, report. Communication to all participant while drilling execution.

i am graduate mechanical engineer having 7 years expereince in piping/structure fabrication and erection in the kingdom of bahrain.we were making the items like tanks , pressure vessels,pot shell,pipe stack , pipe racks for oil and gas sector, petrochemicals and off shore products.

I have extensive experience on Electrical Engineering studies , construction , Transmission & Distribution and Oil & Gas during my assignment on Total E&P Yemen and Petomar in Angola. Designing, modifying, and implementing electrical system my daily challenging job.

ASNT L III UT AND WELDING INSPECTOR AWS CWI QC1.

I am a Structural Designer with over 7 years experience in design of offshore and onshore oil facililities, building and other civil infrastructures

Seven (7) years experience in designing fire protection systems for petrochemical plants and similar industries. I am familiar with NFPA and other internationally accepted standards.

7 years experience in Mechanical maintenance

- Good at English and drilling software.

16 years of Piping & Pipelines Project Management/Project Execution experience in the Industries like Refineries, Hydrocarbon, Petrochemical and Oil&Gas(Cross Country Pipelines, Booster Pump stations, Oil Station, Gas Station, Up-Stream flow Lines).

GRADUATE MECHANICAL ENGINNER,CSWIP 3.1 WELDING INSPECTOR CERTIFIED BY TWI,UK,ASNT LEVEL II IN RT,UT,PT,MPT,IRCA UK APPROVED ISO 9001:2000 QMS LEAD AUDITOR COURSE PASSED. MORE THAN 8 YEARS EXPERIENCE IN QA/QC,WELDING INSPECTION IN EPC OIL&GAS

Making electrical design by using program ETAP such as Load Flow Study, Short Circuit, Motor Starting, Relay Coordination, Transient, and also calculation manually as a proof of the software.

Iam a Graduate Mechanical Engineer with MBA in Poduction Management and a PG. diploma in Materials Management with around 8 + Years of Experience in various MNC's (Oil & Gas, Process/Chemical, Metallurgical, Pharmaceutical.etc.).

An enthusiastic and self motivated Production and Process Engineer, with experience on production optimization and surface equipment designing and evaluation, focused on maximizing asset production capacity and productivity in the oil and gas industry.

HSE Manager, Experience in HSE studies of seismic exploration 2D and 3D since 2004 to the date

Oil and gas mechanical technician

I have diploma with 20 years experience in construction/maintenance. 10 years in oil industries maintenance, also witness commissioning and start up of new installations in the refinery. Hands on experience in 33/11/3.3kv/440v systems.Available in one month time notice period.

Specializing in ICT/SCADA planning Proven Technical & Management Expertise with 14 years Experience overseas-Kuwait and Japan.

See resume

Resume for Project engineer position

Expert INSTRUMENTATION , SCADA, TELECOM , DCS OR SAP / ERP , DESIGN , ENGINEERING , PROJECT MANAGEMENT , OPERATION AND MAINTENANCE , TECHNICAL SERVICES , ISO’S ETC

Industrial engineer, ample experience in catalytic cracking technology and liquefied natural gas, seeks position to apply knowledge acquired as researcher over past four years. Having lived in Latin America and Western Europe, have developed effective multi-cultural skills.

Chemical engineer with over eight years experience in an oil refinery. Utilize exemplary leadership, time-management, critical thinking/analysis, problem resolution, written/verbal communication and human resources management skills to plan and schedule operational, production and dispatch facility

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 [ 36 ] 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out