Resume - A hardworking and highly competent Electrical Engineer

Misco Jobs

Resume #27756

CONTACT INFORMATION:
View contact information...

PROFILE:
A hardworking and highly competent Electrical Engineer with extensive commissioning, startup & maintenance experience on POWER PLANT, REFINERY, PETROCHEMICAL, OIL & GAS projects, who has developed skills in:
- pre-commissioning, commissioning and startup;
- construction and turn around maintenance leading;
- preventive and scheduled maintenance;
* fault finding, repair, testing and operating on all electrical equipment from petrochemical, refinery and oil and gas industry;
* demonstrated strong leadership and mentor, excellent communication and decision-making skills in multi-task, team player environment;
* able to empathize and work with people of differing backgrounds and culture.

WORK EXPERIENCE:
April 2004 –up to present: OKPAI COMBINED CYCLE POWER PLANT, Okpai, Delta State, NIGERIA
Electrical Supervisor, working for the client (AGIP – Nigeria) for Construction and Commissioning Department at Okpai - 480MW Combined Cycle Power Plant.
* Responsible for inspection of electrical works during plant construction, prepare the punch list of electrical systems at the completion of construction, in ensuring safe checkout of protection systems and board functionality prior to energisation, then to put into operation HV switchgear, large motor drives, MV and LV switchgears, etc. Supervise the activities of the designated work area contractor in pre-commissioning of various items of electrical equipment of the power plant project. Supervise pre-commissioning activities to support system completion, then the commissioning of electrical equipment of the power plant. (210 MVA-15.75kV Alstom generators, 15.75/330kV-205MVA step-up transformers, ABB - HV circuit breakers and electronic protection relays, diesel engine generators, MV and LV motors, service transformers, battery chargers and UPS panels, etc).

January 2003 – December 2003: BELEMA GAS INJECTION PROJECT, Shell Production Facility, NIGERIA
Electrical Supervisor, Maintenance Department.
* Involved with the maintenance of the electrical equipment from Belema Gas Injection Plant located in Niger Delta (swamp): Kato gas-engine driven generators, diesel-engine driven generators, electrical equipment for Solar Gas Turbine and HP compressors, air compressors, centrifugal and reciprocal pumps and compressors, alkaline and acid batteries with their chargers, MCC equipment, Gutor UPS, HVAC system, variable speed drivers, interface panels, etc.

February 2001-December 2002: ELEME PETROCHEMICALS Co. Ltd. Port Harcourt, NIGERIA
Electrical Superintendent. Electrical Maintenance Department Technical Backup Service.
Responsible for:
* Supervising the specific electrical works for the following petrochemical plants:
Olefins Plant, Polyethylene Plant, Polypropylene Plant, Power Plant, Utilities & Offsites;
* Supervising specific maintenance electrical work on all electrical equipment in petrochemical complex from Power Plant generators (GE type, 50MVA, 11kV) to HV substations (33kV) down to low voltage systems, including the testing and commissioning of all types of protection relays; Performed low and high voltage switching, isolation and earthing of installations.
* Supervising and executing specific work in the electrical workshop;
* Supervising and carrying out routine and preventive maintenance for all electrical equipment: 11kV and 3.3kV brushless generators, step-up and step-down power transformers, a large number of high and low voltage motors, switchgear and MCC rooms, etc., etc.
* Supervising electrical and instrumental repairs of HVAC systems;
* Troubleshooting electrical equipment;
* On job training of the electrical personnel.

March 2000 – November 2000: ESCRAVOS GAS COMPRESSION PROJECT – PHASE 2, Chevron Production Facility, NIGERIA
Electrical and Instrumentation Superintendent for a construction company (WECO, Port Harcourt, Nigeria):
* Responsible for the specific electrical and instrumentation work for construction of the gas compression plant at Abiteye, Delta State, Nigeria. The new plant includes two 780 kW- 4120 V generators, HV and LV switchgear, MCC room, Solar turbine control panel, PLC control cabinet for the gas compressor, local PLC panels, safety system panel, different field instruments (to control flow, pressure, temperature, level), lighting and grounding system.
* Involved in pre-commissioning, commissioning and start-up of the gas compression plant at the end of construction.

1999: OBAIYED GAS FIELD DEVELOPMENT, WESTERN DESERT, EGYPT
Electrical Technician, Electrical Commissioning Department.
* Involved in pre-commissioning, commissioning and start-up of the electrical equipment from the gas compression development plant: gas turbine generators (11kV, 25MW), high voltage motors (11kV, 5.3MW) that drive the gas compressors, power transformers, low voltage motors, buss-bars, power and control panels, UPS, etc.
* Familiarized with microprocessor-based automation system for control, protection and monitoring of 3-phase motors, and measurement and control of incoming and outgoing feeders (CLINK-system, made by HOLEC-HOLLAND).

1996 - 1998: ELEME PETROCHEMICALS Co. Ltd. -Port Harcourt, NIGERIA
Electrical Superintendent. Electrical Maintenance Department Technical Backup Service.
Responsible for:
* Supervising the specific electrical works for commissioning and start-up the petrochemical plants: Olefins Plant, Polyethylene Plant, Polypropylene Plant, Power Plant, Utilities & Offsites;
* Supervising specific maintenance electrical work on all electrical equipment in petrochemical complex from Power Plant generators (GE type, 50MVA, 11kV) to HV substations (33kV) down to low voltage systems, including the testing and commissioning of all types of protection relays; Performed low and high voltage switching, isolation and earthing of installations.
* Supervising specific work in the electrical workshop;
* Supervising routine and preventive electrical equipment maintenance;
* Supervising electrical and instrumental repairs of HVAC systems;
* Troubleshooting electrical equipment;
* Issuing of the material spare parts list for all the electrical equipment;
* On job training of the electrical personnel.

1990-1996: PETROBRAZI S. A. Ploiesti, ROMANIA
Electrical Superintendent. Maintenance Department. Responsible for:
* Coordinating the daily running of five electrical H.V. substations (110/6kV and 35/6kV) and a large number of electrical L.V. substations (6/04kV);
* Operating and supervising the maintenance for a large variety of electrical equipment: low and high voltage transformers, an extremely large number of induction motors and synchronous motors, low and high voltage circuit breakers, electric devices for protection, measuring and control, batteries storage with their specific electrical equipment, UPS systems, AC and DC generators, machine tools, control circuits, etc;
* Supervising specific maintenance electrical work on all equipment in the refinery and petrochemical complex;
* Supervising the specific electrical work for construction and revamping of petrochemical and refinery plants;
* Supervising the specific electrical work for commissioning and start-up of petrochemical and refinery plants;
* On job training of the subordinated personnel.

1988-1990: PETROCHEMICAL COMPLEX OF Basrah, IRAQ
Electrical Supervisor. Maintenance Department.
Responsible for the technical integrity of the following:
* Supervising specific electrical work for restoring the technical characteristics and revamping of petrochemical plants inside of the complex;
* Supervising the specific electrical work for commissioning and start-up of petrochemical plants;
* Supervising specific maintenance electrical work on all equipment in the petrochemical complex from incoming substations down to low voltage systems, including the testing and commissioning of all types of protection relays;
* Supervising the start-up and electrical and instrumental repairs of HVAC systems;
* Supervising routine and preventive electrical maintenance;
* Troubleshooting electrical equipment;
* On job training of the electrical personnel.

1984-1988: PETROBRAZI S.A. Ploiesti, ROMANIA
Maintenance Department, Electrical Engineer (shift) responsible for:
* Supervising the electrical feed power to a large variety of technological plants: refineries, petrochemicals, and rubber plants;
* Working with the electrical team on shift for routine maintenance and troubleshooting of all electrical equipment from above mentioned plants;
* Coordinating all activities of the electrical personnel on shift;
* On job training of the subordinate personnel.

1978-1984: PETROBRAZI S.A. Ploiesti, ROMANIA
Maintenance Department, Electrical Technician promoted to foreman on the following activities:
* Installation, start-up, commissioning, operation, routine maintenance and repairs, checking and starting electrical equipment consisting of low and high voltage motors and transformers, bus-bars, breakers, relays, secondary circuits and interlocks.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 701 to 750 of 6635)

Go to Search Parameters...

Brief Description

Having 13 years of exprience in maintenance construction and design field of all types of instruments in oil and gas industry.preference given for offshore / on shore ON/OFF duty jobs.

Instrumentation engineer B.E (Electronics) with experience in Engineering /Design in the field of instrumentation. My experience in the sector of EPCM’s and E&P includes the supervision of different Oil and gas Projects in the upstream and downstream sector, incl: insta; Erection and commissioning

Have wide-ranging experience in Oil & gas (both Onshore & Offshore), refinery and petrochemical industries with good exposure towards Distributed Control Systems, Safeguarding Systems, Fire & Gas Systems and various types of Field Instruments.

I am a 3D PDS piping designer I work in various field of engineering, mostly oil & gas I have also knowledge in structural designing

Geologist, with 18 years of experience in the hydrocarbon sector, working in Venezuela, Trinidad and Tobago, Brazil and Mexico. Good command of computers. Experienced working and studying in a multicultural and diverse environment - Excellent interpersonal, communication and teamwork skills.

Degree: B.E. (Architect) Construction, Civil Works and Buildings expertise & HVAC installation.

14 year experience in detail engineering of static equiment like pressure vessel, columns, heat exchangers and packages

Looking forward to join an Organization where I can pursue a Successful career by utilizing my skills and abilities to the maximum extent with full potential.

Petroleum Economist

As you will see from my CV & With my proven ability & experience to develop various studies, reports, calculation and design of instrumentation & control system and maintain the highest quality standards whilst also minimising costs.

Over 12 years of Piping detailed engineering experience in PDS-3D working Environment, exposure of SmartPlant Review, PDS-Piping Coordination, drafting tools AutoCAD/MicroStation, Piping stress analysis (static) by Caesar II, Piping material procurement and excellent skill in MS Office applications.

Hands on experience on High Pressure Mobile Hydraulic Systems (Closed Loop & Open Loop Systems), which includes Variable & Fixed Displacement Hydraulic Pumps & Motors, Various types of Hydraulic Valves, Proportional Valves, and Electro Hydraulic Actuators, Hydraulic Cylinders.

Lead offshore structural engineer

Electrical Engineer with wide experience of erection, commissioning, troubleshooting and maintenance

Experienced Professional Mechanical Engineer with 15 years diverse professional experience in Oil & Gas Industry - Project/Design/Operations Engineering, Rotating & Static Equipment sizing and selection, Commissioning Activities, and associated technical skills.

Piping DEsign Engineer with 13 years of experience in the field of refinery, petrochemicals, fertilizers. Experience in layouts, materials, stress analysis. Presently working with KNPC, Shuaiba Refinery, Kuwait

Technical Professional with over 20 years global experience in Petroleum Engineering, Intervention Services, Project management, On-site Supervision, Proposal and Report preparation, Contract preparation and Administration.

A hardworking and highly competent Electrical Engineer

A petroleum geologist proficient in interpreting and integrating well logs, core analysis data, petrology, 2D and 3D seismic, well test and production data to develop prospects and drilling opportunities leading to the economic production of hydrocarbon.

QA design and Quality Control including conduct of coordination and various inspection activities on mechanical packages in UK, Europe, USA, Middle East and Far East. Computer system / procurement activities.

My objective is to start a new career in Indonesia that would allow me to expand on my twelve years of sales, marketing and contract experience in the service sector for the Indonesian Oil, Gas and Geothermal business after retiring from Schlumberger.

Charted Engineering marien & mechanical engineering with PHD in Engineering management,20 Years experience as senior corrosion engineer in mining and petroleum industries. With 15 years in engineering management. Specialist engineer coating and Cp design.

I am a Project Manager/Mechanical Engineer with 33 years experience in both, International & local projects.

2003-2004 Veco Engineering Abu Dhabi 2002-2003 ABB s.r.l. Romania 2001-2002 ABB s.r.o. Czech Republic 2000-2001 T.I.A.b , Romania 1999-2000 Progeco Sistemi Group, Italia 1998-1999 I.P.I.P. , Romania 1980-1998 Upetrom S.A. Romania

Directing and maintaining the QHS&E efforts of the Region, to conform to Company policy, regulatory, and customer’s requirements. Developing Region policies, procedures, and related documentation. Interact with client HSE departments to ensure understanding of HSE Systems.

Ist class Chemical Engineer with vast experience in operation , Project Management , Engineering Management , Commissioning Management in Fertilizer , Petrochemical and refinery field.

Mechanic Engineer

A Uk based professional Chemical/ Process Engineer with 20 years experience in various aspects of Plant Operations and Design. Looking for ex-pat status or home based job/contract. Special interests include Environmental Engineering, solid/ liquid separations and wastewater treatment.

DCS system engineering design, configuration, installation & commissioning.

Take up Senior Corporate Management Level challenging position with multi-million Heavy industries

Develop and evaluate fire hazard analysis,various types of fire protection/detection and suppression systems, scope development, review of deliverables, identify user interface requirements and project coordination

Polyester, Nylon,extrusion,plant management, manufacturing, sales

Experienced, proficient and highly qualified Senior QA Engineer/Manager, able to provide 30 years of QA and QC experience in a wide range of disciplines within the oil and gas sector. Would consider a long term posting (if possible) in the UAE, Malaysia, Thailand, Singapore, Japan or Vietnam.

Dear Sir, I am looking for a job.Thanks for your email,

Over 30 years in oil and gas pipeline inspection. Welding and NDE CSWIP 3.2 CSWIP RT UT MT + ATTO

Petroleum engineer with 28 years experience. Primarily field exploitation but includes drilling, production, reservoir and facilities. Overseas for 14 years working on properties in Pakistan, Indonesia and New Zealand. Able to work under conditions with little support staff or management supervision

I have a Bachelors degree in Chemical Eng with over 20 years experience in Safety, Chemical Plant Operations and Process Engineering in multi national chemical companies like EXXON, Ciba-Geigy, & Shell. Presently working as Senior Process Safety Engineer with a leading company in Saudi Arabia

M. Tech (Electrical Engineering) Over 17 years experience in Design, construction and commissioning in Oil & Gas, Petrochemilcal and Power plant

32+ years Civil Engineering experience on Public Works, Utilities, Industrial, Commercial and Residential projects. Experienced in streets, highways, water systems, sanitary & industrial sewers, airports, site development, grading, drainage, underground piping and specifications

Drilling Engineer . I worked as a well site-drilling engineer, drilling supervisor, operations drilling engineer, drilling superintendent and promoted to drilling engineer specialist, after receiving PhD in Operations Management

Mechanical Engineer (degree) having over 24 years experience in Planning and Maintenance in large petrochemicals, oil/gas facilities. Specialized in Maintenance Planning and CMMS (Maximo).

I am a qualified Electrical engineer with a vast exposure of more than 21 years in the field of Detailed Engineering ,Operation /Maintenance,Erection/commissioning,Testing etc in search of a suitable job in UAE,Qatar,Oman

Sr. Piping/Hvac Designer with over 25 years of experience with a solid 3D modeling experience mainly in AutoCad. Currently studying Cadworx at home using a tutorial from Cadworx.

Mechanical/Petroleum Engineer with 20+ years of experience in artificial lift applications encompassing ESP and PCP (mainly Progressive Cavity Pumps). Development of programs to select PC Pumps and automation/controlling of PC Pump Systems based on surface data such as axial load and/or torque.

Principal Process/Facilities Engineer and Project Engineer/Manager Bachelor's Degree Chemical Engineering University of Oklahoma 1976 and MBA Studies Registered Professional Engineer American Institute of Chemical Engineers Gas Processors Association

Control, Safety Systems and Instrumentation Design / Maintenance / Operations Engineer

EXPERIENCE:Experienced in the design of the following systems: Fiscal Oil and Gas Metering,Offshore / Onshore,Fire & Gas/ESD,DCS, SCADA ,Telecommunication,Compressor Anti-Surge,Subsea Controls,Thruster Controls,Ballast Controls,Dynamic Positioning Systems,Hydroacoustics,Winch Controls.

Fifteen Years working experience on various tankers, out of which eleven years of working experience as 2nd Engineer with Shell Shipping.

I have 13 years experiance in QA/QC inspection field , i working as Piping & Structural Inspector in various projects

13 years exp electrical engineer in T&D of Power sector

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 [ 15 ] 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out