Resume - More than 26 years experience directly involved in the offshore oil and gas indu...

Misco Jobs

Resume #2783

CONTACT INFORMATION:
View contact information...

EMPLOYMENT EXPERIENCE
October 2000 to Present
Phillips Petroleum Offshore Company
Site Structural Engineer
Responsible to site manager for all aspects of structural/ civil engineering during fabrication of Bayu Undan DPP and CUQ integrated decks (15,000 tonnes & 11,500 tonnes resp). Principal achievements include:-
- Completed reviews of floatover and load out designs at critical stages, liaison with all contributing parties to ensure consensus agreement and commonality of design detail.
- Developed load out procedures with HHI engineers. Obtained Marine Warranty Surveyor approval. Specified analysis requirements for inclusion in procedures. Platforms were floatover installations and a critical consideration was reliability of deck support and leg mating unit tolerances.
- Key involvement in the successful completion of the decks by application of sound structural engineering principles to site queries and clash resolution. Working with designers operating PDS model to produce solutions to clashes, fit up and other problems.
- Rationalized engineering problems to produce timely and cost effective solutions, enabling area mechanical completions to proceed on schedule.
- Proactively assisted HHI with craneage and erection procedures during fabrication of decks which were built in 'blocks'. Utilizing 3D PDS model for clear understanding of erection sequences and clearance problems.
- Supervised HHI production of fabrication Weight Report, advised and assisted HHI to develop weighing procedures for the two decks.
- Participated in craneage and yard handling procedures at Samsung Heavy Industries during fabrication Bayu Undan FSO during visits to their Koje fabrication yard.

April 2000 to November 2000
Brown and Root Energy services.
Principal Engineer
- Developed procedures for installation of replacement riser on Liverpool Bay wellhead platform. Performed structural analysis of jacket with revised modelling in order to obtain Lloyd's approval.
- Lead structural engineer Shah Deniz topsides pre FEED. Collaborated with drilling consultants to produce conceptual topsides structure layout preliminary weight report and weight estimates for installation on jacket in the Caspian Sea. Concept was that the topsides would be fabricated remotely and trans-shipped via Volga- Don canal to Caspian Sea.

Between March 1999 and April 2000, took one year sabbatical.

April 1997 to March 1999
Brown and Root Energy services.
Principal Engineer
Initially in Central Projects Group responsible for performing detailed structural design assignments on Sangu Field topsides in Bangladesh and re-certification work on Amoco Northern North Sea fields. Key achievements were:
- Development of procedures for caisson replacements after corrosion failures at NW Hutton.
- Represented Halliburton Energy Services as company technical structural adviser during due diligence evaluations for proposed operation of NW Hutton platform.
- Preparation of design calculations for topsides of Sangu platform, liaison with PDMS/ Triton draftsmen for issuing of AFC drawings to fabricator.

December 1994 to April 1997
Intershore Durban South Africa (AMEC)
Lead Structural Engineer (Topsides)
Responsible for production of detail design of topsides for Chevron Cabinda Phase 2 an EPC contract Supervision and preparation of detailed engineering calculation packages for primary, secondary and tertiary structural steelwork also responsible for design of fabrication supports, temporary build structures, roll ups and response to site queries. Coordination of the interface between EPC contract (Intershore/Amec) and Transportation and Installation contractor (Saipem) as well as the load out contractor (Econofreight). Project engineering for development of green field construction yard including load out quay, foundations for jackets and topsides and main facilities for fabrication and load out of Cabinda project modules.

FEBRUARY 1989 TO SEPTEMBER 1994 - GOODWYN A PLATFORM - WESTERN AUSTRALIA.

December 1992 to September 1994
WOODSIDE OFFSHORE PETROLEUM
Lead Structural Engineer - Goodwyn A Project
Lead Structural Engineer during the final phase of the project responsible for all aspects of Jackets and Topsides Structural Engineering, including completion work, change control, structural integrity, report production, as built drawings, preparation of safety case, offshore job card production and hook up support. Topsides design representative during offshore installation.

During the pile remedial program which lasted 15 months responsible for project engineering for completions work on Modules, project engineer for combining drilling "mini modules" into two lifted modules of 1200 and 2000 tonnes.

Installation engineering on new 200 tonnes "Amenities Module" for Goodwyn.

February 1989 to December 1992:
DAVY MCKEE MCDERMOTT
Lead Structural Engineer - Goodwyn A Project
Supervision of all design aspects relating to installation of Goodwyn 'A' Platform Topsides for Woodside Petroleum including: Analysis for Load-Out, Transportation, Lifting and Skidding of the modules. Development of installation procedures and details for six modules of up to 3500 tonnes weight and the vertical flare tower 115 metres in length.

Liaison with the Client (Woodside), Marine Warranty Surveyor, Substructure Designers, Fabricators and Installation Contractors on all matters relating to installation through the conceptual, detailed design, construction and offshore installation phases.

Performed a quality audit on Hyundai's load out proposals and engineering and produced a report recommending extensive changes and improvements, seconded to Woodside's site team to resolve these issues.

January 1992 to November 1992:
Seconded to Woodside's Korean site team as Site Structural Engineer. During this period the 115m vertical flare tower was fabricated and trial fitted to its host module using a procedure developed and agreed with HHI on site. The 2500 Tonnes of load out grillages were designed, built and installed on the two transportation barges.
Responsible for scrutiny and acceptance of all HHI's construction proposals from the point of view of safety, quality and cost.
Site structural engineer until sailaway attended all load outs and supervised construction and inspection of module seafastenings with internal repair of the barges where appropriate. Seconded to Woodside from January 1992.

April 1988 to January 1989:
BUREAU VERITAS - PARIS
Project Engineer
Following on from previous position with Stena in N Africa (see below), certification of various platforms including: finalisation of Ashtart topsides, Elf Petroland L7D wellhead jacket and topside. Warranty Survey for Kakap field in Indonesia, checking of installation procedures for jacket load-out, towing, launch and upending including conducting full analysis together detailed review of topsides load out, towing and lifting proposals.

July 1987 to April 1988:
STENA OFFSHORE
Project Engineer
Re-certification for ELF AQUITAINE of 5 platforms and 3 bridges in Tunisia in 66 metres water depth. Responsible for detailed analysis of the 12 leg drilling jacket, two 4 pile utilities jackets and two flare tripods.
Production of detailed reports which were used to develop planned inspection and maintenance program for the client. Analyses were performed using the SESAM 80 suite of programs. Successfully negotiated re-certification with Bureau Veritas for four of the five platforms the fifth was completed with BV continuing on from completion of STENA's involvement.

September 1986 to May 1987:
MICOPERI
Senior Structural Engineer
Performed feasibility study for SAGA Petroleum (SNORRE) on installation of proposed 2000 tonnes sub-sea manifold and drilling template, TLP template and anchor sub-base. Concepts developed for steel or concrete TLP mating and installation. Preliminary installation engineering for the TLP sub base and drilling template.
The result was the successful development of the field using the procedures developed during this study.

June 1985 to August 1986:
KROESE OFFSHORE SERVICES LTD
Project Engineer
Responsible for management of engineering in a specialized offshore installation consultancy, providing advice to operators on installation matters. Clients and projects included:
Marathon East Brae - very large module (6,000 - 10,000 tonnes) installation and fabrication feasibility study.
British Petroleum - heavy lift vessel evaluation and large topside (integrated deck) development feasibility study.
British Gas Corporation - Morecambe Bay - installation management for a riser protection structure on CPP1
Shell UK - Lifted jacket installation and load out feasibility study (NW Dunlin).
October 1983 to June 1985:
HEEREMA ENGINEERING SERVICES (UK) LTD
Project Engineer
Senior Structural Engineer ARCO Thames development, responsible for engineering of two 160ft water depth jackets design from initial concept through detailed design, including in-place, load-out, transportation, lifting, damage and fatigue analyses. Construction engineering at Lewis Offshore, load outs and seafastening.

March 1979 to September 1983:
BRUNEI SHELL PETROLEUM
Senior Structural Engineer
Responsible for structural integrity of BSP's 200 jackets e.g. preparation of Inspection Philosophy, NDT Inspection Procedures using divers and ROV's and other data gathering exercises. Preparation of design reports and analyses of topsides and jackets.
Design checking of jackets prior to workovers and after discovery of damage. Subsequently, formulating programs of remedial works, including fabrication and installation supervision.
Developing Scopes of Work for design verifications, design of repairs and development of procedures for various repairs from simple weld repairs to complex grouted and clamped solutions.
Arising from the above programs, development of Scope of Work and conceptual design of replacement drilling platform to be installed around 19 existing oil wells (AMDP-1). Supervision of detailed design by Earl and Wright, including a period of 8 months as Resident Engineer in their offices in San Francisco.

April 1975 to February 1979:
HEEREMA ENGINEERING SERVICE - HOLLAND
Structural Engineer
Responsible for jackets, decks and foundations design for a number of structures in the North Sea including:
Two 4 pile and one 6 pile platform, 100ft. water depth (Pennzoil, Holland).
12 pile, 24 conductor drilling platform in 280ft. water depth (Elf, Tunisia).
Also, generally responsible for the structural design of facilities for jacket launching, deck lifting, module lifting, loadout and seafastening. Projects included: Phillips Ekofisk, Shell Brent B, Oxy Claymore and Beryl Alpha.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1951 to 2000 of 6543)

Go to Search Parameters...

Brief Description

PIPEMILLS,PLATE MILLS, EXPEDITOR, VENDOR INSPECTOR, TECHNICAL WRITER ON PIPE SPECIFICATIONS QA/QC CO-ORDINATOR,

30 years experience in all types of heavy industry, the equipment used, predominately in coatings and linings. Experienced in all phases of construction projects. Supervised numerous larger projects, overseen and implemented safety, inspection.

Working knowledge of marine diesel propulsions and electricity generation systems. Familiar with mighty power engines. Knowledge of support systems such as fuel centrifuges, air compressors, pumps, hydraulics, refrigeration, heating, and air conditioning.

Provide diverse engineering technical support for research, reporting and production. Work history includes oil and gas production, oil and gas debt and equity capital transactions, and oilfield equipment.

I have worked both on and offshore for 30 years. I have also worked in shipyards, including writing commissioning procedures, commissioning equipment and writing preventative maintenance procedures. I have current offshore survival and medical certificates. I am immediately available.

Multi-disciplined sub sea engineer, extensive experience gained in the design, selection, operation, maintenance and acceptance testing of well control equipment, working in a variety of different environments to the standards specified by the manufacturer, drilling contractor and operator

I have been in the offshore industry for more than 23 years, my recent experience has been with new build drilling rigs as Commissioning Manager; Team Leader Mechanical and Piping Systems; Project Superintendent. Previous 14 years experience was with the British merchant navy as an engineer officer.

Seeking a full time position to actively contribute to the technical achievements of a company in the oil and gas industry

QA/QC Welding Inspector

Resume for the job in maintenance or operation field.

More than 26 years experience directly involved in the offshore oil and gas industry. Experienced in detailed structural engineering, fabrication and installation of offshore platform topsides including floatover installations and Floating Production Platforms.

SCADA Specialist

25 years in Oil& Gas, Power and Petro-Chemical Industries. I am a multi disciplined QA/QC professional. Safety oriented, team oriented, quality oriented, and production oriented. I have organizational and managerial capabilities. I would look forward to an opportunity to serve your interests.

Eleven years of experience in design, development, testing and implementation of Application Software.

BS in civil engineering and MS in structural engineering. Have worked as a civil/structural design engineer for 14 years in petrochemical plants design and construction. Skilled with MS office, Staad-Pro & Risa3d. Familiar with AutoCAD. Contract only.

Senior Networking Engineer

Casing design and selection, cement slurry design, BHA design, hydraulics calculations, BHA design, drill bits, drilling fluids design, solids control equipment, drill strings, well control methods, surface equipment, directional drilling. Schlumberger Drilling Office Software & TDAS.

Did M.Tech in Petroleum Engineering and B.Sc. Engineering in Mechanical discipline.

5 year experiance in rotating equipment field. Experiance includes service, manufaturing, engineering, sales and marketing

Working in siemes power generation having 11 year exp.

Broad experience in mid-stream and upstream oil and gas production and facilities. B.S. double major Petroleum and Chemical Engineering. M.S. Environmental Engineering

To seek a challenging position that will utilize my expertise in the field of Process instrumentation. And have an opportunity to work with highly professional group of people, hence to achieve personal growth, satisfaction & welfare of our organization.

Hi, my name is Pervez Iqbal, I am a mechanical engineer with 7+ year experience in my work. I am searching a job for myself in the US. My work status is permanent resident/green card.Currently I am living in California, but willing to relocate near my job area . I have work experience in CAD/CAM de

Material Selection,Welding Procedure Specification(WPS), Non Destructive Test Procedure(NDT)

Mechanical Engineer in the Department for Research and Development of Oilfield Equipment

Experienced and Professional I&C Engineer

More than 7 years seismic acquisition, processing, Interpretation and reservoir Geophysics experiences with several major seismic companies and seismic processing contractor company.

Possess Degree in Engineering and more than 10 years of Professional Experience in Project Planning and Controls through various project phases such as Front End Design, Detail Design, Procurement, Manufacturing and Construction for various Oil & Gas, Petrochemicals & Chemical projects.

I am a Petrophycisist with 8 years of experience

Multi-disciple project engineer covering, electrical, instrument, mechanical, piping work etc. Gas Turbine & High Voltage Power installation work. DCS work. Contract Management / Planning / Cost/ Commissioning, Training, Maintenance,. Vendor Inspection. Contract estimation work, QA/QC/QS.

Senior Operations Technician with over 25 years of experience as control room panel man/ field operator of LNG Plant, Jetty coordinator LNG. High pressure hydro cracker (isomax), hydrogen plant, CDU, Vacuum distillation and Visbreaker units. National Diploma in Technology Chemical Engineering

I want to work as Instrument Foreman/ Technician with good knowledge and experience in Process Instrumentation in Power plant and Desalination Plants.

Professional with 4+ year’s oil field exploration rig experience - willing to travel and relocate. Enthusiastic oil safety professional with proven skills in: Oil and Gas Exploration and Characterization Petrophysics Seismic Attributes, Seismic Inversion Seismic Interpretation

Dimensions of my career profile extend to in depth knowledge of electrical design and detailed engineering activities for the project related to chemicals, petrochemicals, oil and gas plants. Qualification: Bachelor Degree in Electrical Engineering, Exp: 5+ years,

Engineer - Technical Support and Design LPG SNG GAS Operations

Participated in conducting FAT/SAT of Foxboro SCADA., Participated in conducting FAT/SAT of Ascom PDH/SDH Telecom System. Went for 15 days training for Administrator and Operator training on Foxboro SCADA System at Foxboro Rome, Italy.

I have hands-on experiene in the field of Oil&gas, refinery as well as Petrochemical for past 10 years in Indai as well as Guld. I was invloved in the Control System FAT, Power-up, SAT, Hot/Cold cut over and Maintenance.

Engr, design, & spec of process instruments with field instrumentation, PLCs, & DCS's in refineries & petro-chemical plants. Created schematics, loop diagrams, install details, location plans, & data sheets. Proficient in AutoCAD. 100+ university hours in Industrial Tech & Instrument Technology.

CADD Drafting, Geo-Tech or Digitizer

Worked in Oil/Petrochemical/Refinery projects for a period of 21 years as Manager Construction.

I'm a skilled Well Engineer with a wide experience in well construction, stimulations, completions, and workovers. Strong team management and communicational skill with experience to manage the complete well engineering process from well design to drilling execution of exploration projects.

Develop plant layout. Nozzle orientation. Check vendor prints. Prepare detailed drawings. Modeling 3D and Isometric. Job control and records. Pursue codes, standards and specifications. Assist construction. Maintains job control and records. Check work for accuracy. Prepare punch list.

14 Years of experience in OIL an Gas Industry in Venezuela Engineering experience in Oil Treatment Plants, Compressor Plants, Oil and Gas Gathering Systems, Pipelines, Rotating Equipment.

I wish to apply for a position as an Instrumentation or/and Electrical or a Process Technician. I have 22 years experience in the Instrumentation and Electrical field. I complete my T4, I pass my Instr. trade test. I write my wireman’s license and also my Elect trade test.

I am having total 15 years experience in design field, 5 years in manufacturing detail designing in valve industry-fouress, 5 years in hvac & pollution control field- abb/flakt, 5 years in design consultancy firm - chemtex- pds 4+ years exposure.a

Engineer with 25 years experience working with pumps, compressors and gas turbines in offshore, petrochemical, refinery, power generation and water injection projects

DCS Start-Up and Commissioning Field Engineer I&C Field Engineer I&C Technician

Looking for world wide employment as a Drilling Fluids Engineer, Salesman or a stock point management position for expediting chemicals and materials to drilling locations.

Experience of controls system for example: DCS, ESD, F&G, HIPS. OFFSHORE, ONSHORE, FPSO, DESIGN, CONSTRUCTION, COMMISSIONING, MAINTENANCE, HAZOP, SIL, FEED.

I have had twenty years experience in the Petroleum Industry ranging from Drilling, Production, Completion, and Work-over engineering in all types and configurations of wells and drilling units/production platforms both onshore as well as offshore. I have worked in Canada, Saudi Arabia and Thailand.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 [ 40 ] 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out