Resume - Technical Professional with over 20 years global experience in Petroleum Enginee...

Misco Jobs

Resume #28024

CONTACT INFORMATION:
View contact information...

PROFESSIONAL EXPERIENCE:
Dec Jan. 2004 - Present, Synergy Technology Co., Athens, Greece
Technical Professional Consultant

Analyzed drilling, logging and production data, to select candidate wells for intervention operations. Designed optimized production enhancement treatments (hydraulic fracturing). Conducted personnel training on optimized design, safe and effective placement of treatments, using advanced 3D, real-time analysis and evaluation techniques and systems, in W. Siberia, Russia for Major Oil Companies

Aug. 2000 - Dec 2003 and Dec. 1981 - Dec. 1992, Halliburton Energy Services (HES), Duncan, OK, USA
Technical Professional

Worked in all geographical and reservoir environments (USA, Egypt, Greece, the Netherlands, Italy, United Kingdom, Angola and Russia) and on many types of operations projects which required creativity and innovation, and which had positive operational and financial results:

- Designed, supervised and or analyzed over 300 Hydraulic Fracture treatments (2001-03) including unique coal frac job which was done inside a coal mine in Belgium, which resulted in government decision to develop the gas with wells drilled from the surface after mines were closed.

- Designed and supervised numerous matrix acidizing treatments.

- Experienced in Frac Pack Completions and Operations, unique 100 mesh sand job in the N. Sea, which resulted in decision to proceed with development of shallow gas wells.

- Creative solutions to unique problems: Formation damage problem in Gulf of Suez well caused by anti-foam additive in the diesel completion fluid. Designed surface manifold (patented in the UK) which allows multi-stage Fracture Acidizing without stopping. Re-aligned and repaired parted casing of geothermal well in Italy.
- Designed many wellbore clean-out procedures utilizing Nitrogen foam and coil tubing. Wells went back in operation at record time and reduced costs.

- Extensive experience in well cementing operations: casing, liner, squeeze, balanced plug,, lightweight (N2 foam, glass beads), expanding, etc. Majority of jobs had very good CBL, and minimum annular gas problems.

- Developed training material and conducted internal and external training courses in hydraulic fracturing design, real-time monitoring and analysis. Utilized the Fracpro 3D Fracture Simulation System. Clients were very satisfied. The evaluations were very positive. The trainees have able to improve operations by reducing costs and improving production.

- Prepared training material and trained personnel on the proper analysis and evaluation of the Rate step-down-test, which when done and analyzed properly eliminates premature treatment terminations.

- Conducted numerous well tests while assigned to Well Testing Dept. for one year.

- Re-designed marketing brochures for downhole tools, which included quarter cut-outs and specifications. These brochures are the standard used today. Marketing was up scaled. Company image improved.

- Sealed-off artesian water well in Italy, which was placed on production by explosives used in seismic exploration. Successful operation prevented: bad publicity, flooding of adjacent farmland, lawsuit for damage to rice crops. Saved considerable financial resources.

- Solved many extremely difficult lost circulation problems, which occurred during drilling operations (well could not be maintained full). Drilling resumed and offshore rig costs (50,000/day) were saved.

- Prepared numerous high quality technical proposals and cost estimates, which were priced correctly and won the contract work in the bidding process.

- Authored numerous design and analysis reports (all are confidential or proprietary).

- Maintained daily contact with clients

- Conducted materials testing for cementing, fracturing, acidizing, and prepared lab reports.

- Managed the company operations in Greece from 1990-91, with the highest field operating profit (86% ) whereas many company operations in Europe, Africa and M. East showed 5-30 profit or losses.

- Negotiated and executed 3 two-year service contracts in Greece: Cementing, Stimulation and Well Testing.

Aug 1999 - May 2000, National Exchange Carrier Association (NECA), Whippany, NJ, USA
Manager - Demand Databases

- Managed and analyzed the Tariff Element Tracking Database, using the SAS Software. Database used to set the tariffs charged by 1400 independent telephone companies in the USA.

- Utilized Geographical Information Systems (GIS), MapInfo/Map Basic and the FCC's Synthesis Proxy Model to determine how the FCC policy of forward-looking cost mechanism will affect the Universal Service Fund (USF) receivables of client telephone companies.

-Wrote ANSI Basic Computer programs, used to create user configurable telephone network maps, and also estimate the cost of upgrading the network for Universal Broadband Internet Service.

June 1993 - July 1999, Resources Engineering Systems (RES), Cambridge, MA, USA
Technical Consultant

- Consulted with clients worldwide on the design, execution and analysis of hydraulic fracturing treatments.

- Incorporated data handling and analysis feature in Fracpro, which automated the Rate Step-down Test in Fracpro. This analysis is necessary for proper Net-Pressure matching, and is in standard use worldwide.

- Trained personnel on the use of the Fracpro 3D System at various Operating and Service Companies: Pemex, INTEVEP (PEDVESA), Halliburton, Western Co, BJ Services, Agip, Wintershall, RWE-DEA, etc.

- Conducted perforation and near-wellbore friction study on 36 horizontal well fracturing treatments in the Dan Field, N. Sea, for Maersk Oil Co. which resulted in modification of the fracturing procedures and minimized screen-outs in soft chalk formations.

- Principal systems analyst for CementPro program. Incorporated unique returns analysis feature. This feature not available in competing software yet is the only credible way to analyze casing cementing operations.

- Contributed to establish and enhance Fracpro's market-leading position.

- Conducted pre/post sales marketing and technical support for Fracpro.

- Managed the company trade show marketing effort.

- Co-authored SPE Paper 28565, and assisted in the preparation of two published technical papers.

Aug 1979 - Dec 1981, N-Y Associates, Consulting Engineers, Metairie, LA, USA
Project Engineer

- Designed large civic projects for Municipal and Regional Governments).

- Prepared project specification cost estimates and construction contact documents.

- Presented projects in public forums to obtain financing and environmental approval.

HIGHER AND CONTINUING EDUCATION:
June 1973 - Dec. 1977, University of Massachusetts, Amherst, MA, USA
Bachelor of Science in Civil Engineering

Cont. Education Courses: Well Cementing, Geology, Log Analysis, Reservoir Engineering, Well Test Analysis, Hydraulic Fracturing, Matrix Stimulation, Downhole Tool Hydraulics, HSE, QA/QC, Management.

PROFESSIONAL /TECHNICAL PUBLICATIONS:
Cleary, M.P., Massaras, L.V. et al: "Major New Developments in Hydraulic Fracturing with Documented Reduction in Job Costs and Increases in Normalized Production," paper SPE 28565, SPE Annual meeting, New Orleans, LA, (September 25-28, 1994).

TECHNICAL SKILLS:
Engineering Software: Fracpro RES/PT, F.A.S.T.: RTA, Welltest, MBA, ViruWell, HalWin,
Productivity Tools: MS Office 2000, MS Internet Explorer
Network Operating Systems: MS Windows, 95/98/2000/XP, Win NT 4.0
Development Tools: ANSI Basic, Visual Basic 6.0, SAS

LANGUAGES AND INTERESTS:
Languages: English: Fluent Greek: Fluent, Italian: Fluent, French: Fair
Citizenship: USA, EU
Interests: Travel, Water Sports, Internet, Woodworking

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1151 to 1200 of 7050)

Go to Search Parameters...

Brief Description

I am a very experienced cementer thats is hard working, enthusiastic, reliable and trustworthy and also able to lean new things fast.

Oilfield Experience: 25 years

Instrument & electrical design and field work

Sr. piping designer/checker, total 21 years experience in oil and gas field

Autocad, Bentley AutoplanXP, Navis Works, Isogen, Excel, Access, Word

Reservoir engineer - Experience in tight sands and shale and CBM

I have more than 10 years of maintenance experience as an instrument technician

I have 15 years experience as Extraction-Production Onshore Oil & Gas Engineer (artificial lift, Sucker Rod Pumping, PCP): Section Head of Field Extraction-Production Onshore Oil & Gas, Technologist Engineer, Night Shift Engineer, Echometer, Optimization Wells, Slickline

NDT Level III

My experience in different Engineering Consultancy Company like SMEC International Ltd.as well International Contractor like Construction & Industrial equipment Ltd in St. Lucia, Caribbean Island, Strabag International assigned in Libya, Willbros International Inc.,Houston Texas, assigned in Nigeria

A highly effective Chemical Engineering Professional who meets challenges head-on and creates positive change. A creative and detail-oriented Six Sigma Black Belt, with a proven record of success in new product development and process improvement; and track record of success developing and leading

BSc in env. MSc in safety eng.

Over 25 years of teaching practical and theoretical in the field of mechanical maintenance in the Philippines and Middle East

Twenty(20) years of experience in detail engineering/FEED/PMC of petrochemical complex/refinery/major industrial projects. 11 years wotking in middle east countrirs. Familiar with international codes and standards.

A highly experienced Pre-Commissioning, Commissioning, Start-Up and Field Engineer, Coordinator, Supervisor, Shut-Down planner, having worked on many varied projects Having a Degree – Marine Engineer, (Ship Engineer)

Proven ability to provide Industry initiative and leadership. 20 years of experience. Extensive SCADA, PLC, DCS and HMI Project Management Consulting knowledge.

Field Engineer

GRADUATE DIPLOMA HOLDER (3 year fulltime study) in MECHANICAL ENGINEERING, having Certifications as SENIOR WELDING INSPECTOR (CSWIP 3.2) -TWI LONDON, NACE (USA) COATING INSPECTOR LEVEL 1 – CERTIFIED, NQA (UK London) Certificate of Training in ISO 9001-2000 QMS Auditor, ASNT LEVEL II-RT,UT,MT,PT

Petrophysicist, Log analyst

He is the Manager of Technology Development in Exploration & Production in the Corporate Direction of Strategic Planning of PEMEX. Previously, he was Well Productivity Manager in the Technology and Professional Development Vice-presidency of PEMEX Exploration & Production. Also, he has been the head

QA/QC engineer/inspector in piping/pipeline and facilities construction in oil/gas. And an HND in welding/fabrication .

Have wide-ranging experience in Oil & gas (both Onshore & Offshore), refinery and petrochemical industries with good exposure towards Distributed Control Systems, Safeguarding Systems, Fire & Gas Systems and various types of Field Instruments.

I am a 3D PDS piping designer I work in various field of engineering, mostly oil & gas I have also knowledge in structural designing

Geologist, with 18 years of experience in the hydrocarbon sector, working in Venezuela, Trinidad and Tobago, Brazil and Mexico. Good command of computers. Experienced working and studying in a multicultural and diverse environment - Excellent interpersonal, communication and teamwork skills.

Degree: B.E. (Architect) Construction, Civil Works and Buildings expertise & HVAC installation.

Seeking challenging Position in Project Management where I can use my Experience, Market Exposure, Management Skill and Communication to achieve the high goals set by the organisation

7+ Yrs Exp in Mechanical CAD/FEA/CAE/CFD

I have 10 years of experience in E&P business, evaluating basins interms of potential, play maturation, volumetrics,maturing prospects, interpreting seismic data, building geological and facies model, well operation, seismic inversion, fluid substitution modelling, porosity estimation, AVO analysis.

Well Service / Wireline / Snubbing / Workover Supervisor

Over 18 years of combine experience in Oil and Gas mostly in Engineering Design projects from FEED to Detailed design for Offshore and Onshore projects, Subsea structures, Structural Piping design, Mechanical, Electrical and Civil work, and other similar structures and equipment details, assemblies

Field & office design, using PDS program, review drawing before send to approved

Procurement Buyer – at Snamprogetti Romania a company of Saipem Responsibilities: - responsible for the process of Liquidated Damages

Senior workover & completion operations supervisor with 7 years experience in HPHT oil wells in different workover activates, gained master degree in petroleum technology, BSc degree in Petroleum Engineering & recently warded IWCF certificate drilling supervisor level.

SUMMARY OF EXPERIENCE Eleven (10) years of very sound technical proficiency as a “Sr. Piping Designer / Draftsman”in the Oil & Gas Field, Petrochemicals Refineries, Piping, Tank farm Area’s, Platform Piping, Jacket Piping, Pipe Racks & Process Equipments, Cross Country Pipelines including pumping s

Hands on experience on High Pressure Mobile Hydraulic Systems (Closed Loop & Open Loop Systems), which includes Variable & Fixed Displacement Hydraulic Pumps & Motors, Various types of Hydraulic Valves, Proportional Valves, and Electro Hydraulic Actuators, Hydraulic Cylinders.

Diploma in Electronics And Telecommunication Engineering. 18 years experiance in instrumentation field ,specially caliberating ,servicing ,repairing electronics instruments

Specialist in QA/QC-E&I, having more than 17 years experience in large size Electrical and Instrumentation construction works

Bachelor of Engineering (B.E) ¨C Electrical and Electronics (1996 to 2000), with 72% at Bharathiyar University, Coimbatore, Tamil Nadu, India.Master of Business Administration(MBA) ¨C Annamalai University,Chidambaram, Tamil Nadu, India.

Experience in Design and engineering of Pressure Vessels, Heat Exchangers, Columns, Reactors, Storage Tanks as per National and International Codes like ASME Section VIII Div. 1 / Div. 2, TEMA, API 650/620, API 660, API 661, WRC ,UBC, IS 875, IS 1893, ASCE, IBR and etc.

Project Controls Estimator

Power Industry Plant Manager - Over 35 years of progressively diverse experience encompassing electric utility generation operation and maintenance, reliability improvement and facility management

i have worked with many multi national firms.I want to obtain a position of Plant manager/Maintenance manager/Service manager in your company. I have done courses under shell company Safety awareness. Incident and injury free. Defensive driving. Safety induction.

35+ years as Drilling Engineer, Drilling Supervisor, and Drilling Superintendent

Project Engineering, Construction, Contracts, Commissioning, Start Up.

Piping DEsign Engineer with 13 years of experience in the field of refinery, petrochemicals, fertilizers. Experience in layouts, materials, stress analysis. Presently working with KNPC, Shuaiba Refinery, Kuwait

Technical Professional with over 20 years global experience in Petroleum Engineering, Intervention Services, Project management, On-site Supervision, Proposal and Report preparation, Contract preparation and Administration.

A hardworking and highly competent Electrical Engineer

A petroleum geologist proficient in interpreting and integrating well logs, core analysis data, petrology, 2D and 3D seismic, well test and production data to develop prospects and drilling opportunities leading to the economic production of hydrocarbon.

QA design and Quality Control including conduct of coordination and various inspection activities on mechanical packages in UK, Europe, USA, Middle East and Far East. Computer system / procurement activities.

My objective is to start a new career in Indonesia that would allow me to expand on my twelve years of sales, marketing and contract experience in the service sector for the Indonesian Oil, Gas and Geothermal business after retiring from Schlumberger.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 [ 24 ] 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out