Resume - Instrumentation, Control system, quality and compliance Engineer, fluent in Engl...

Misco Jobs

Resume #28163

CONTACT INFORMATION:
View contact information...

OBJECTIVE: Instrumentation, Control system and quality engineer

PROFESSIONAL EXPERIENCE PA, USA
11/ 2000 - 2003: Automation & Validation Solution
Automation and Validation Engineer
Developed User requirement Standards.
Developed, revised, and executed validation protocols for Installation, Operationnal,and Performance Qualification.
Generated factory Acceptance Test(FATs) and standard operating procedures, Task Summury and Exception reprots, user and functional requirements for plant packaging, manufacturing and utility systems for the following:
Johnson's &Johnson's "McNeil" Consumer Products Pharmaceutical Plant:
Control system for Pharmaceutical liquids Packaging lines.
Solid dose pharmaceutical processing packaging lines, Induction bottle sealers.
Faulding/Purepac Pahrmaceutical:
Generated IQ and OQ protocols for Faulding/Purepac pharmaceutical Local Area Network(VPN)
Executed approved protocols. Performed all work as defined in the protocol, completed required documentation as applicable (i.e., Amendments, TIRs and/or comments during protocol execution by adhering to cGMPs.
Verified that the TIRs generated during execution are resolved.
verified that completed test cases for accuracy and completion.
Compiled, organized, and summarized all data during protocol execution for the final test summary report.

04/2000- 11/2000: Worldwide Electronics Corp. NY, USA
Technical and Service Manager
Installation of parts of Access Control System in Staten Island University Hospital
Maintenance of Control system on field, and database management
Maintenance and upgrade of Paging and messaging system in the Hospital (SIUH)

1996-1998 SONATRACH / GENERALELECTRIC Algeria
Control System Engineer, G.E Turbine Control Command Retrofit project
Established a work plan and Schedule for each phase of the project using concurrent Engineering to suit funding and time limitation conditions for 82 Turbines MS3002J Retrofit project.
Developed a new control system specifications to enhance performance and reliability of the machines (Turbines).
Feasibility studies, System analysis, System development and implementation with the chosen contractor.

1994-1996 SONATRACH / BECHTEL
Control System & Automation Engineer, Maghreb-Europe pipe line project Algeria
Implementation of SIEMENS SCADA system from field transmitters to Man-Machine (MMI) interface in the control room.
Implementation of NT Software for data acquisition, diagnostics, and equipment management.
Testing, Commissioning and startup of the entire plant.

1993-1994 SONATRACH / NUEVO PIGNONE INC, Algeria
Instrumentation Engineer, Natural Gas Vehicle project testing and installation of electronic kits in the converted vehicle (prototype)
Monitored power Console programming to test vehicle to be converted.

1992-1993 Polytechnic Institute of Oran, Algeria
Electronics Instructor, Department of Electrical and Electronic science
Courses taught:
Basic Electronics,
Electronic Measurements and Signal Processing Theory

SPECIAL SKILLS
Fluent in English, French and Arabic
G.E Certified for Maintenance and exploitation of MS 3002J GE Turbines, SPEEDTRONIC Mark I,II,III,VI and MarkV
Experience in ALLEN BRADLEY PLCs
Experience in BENTLEY NEVADA MACHINES VIBRATION System
Proficients with word processing, spreadsheet, and graphics.
Technical writing and presentation experience.
Internet searching, uploading and downloading with Netscape and Internet Explorer, proficient with word processing, spreadsheet, graphics, AutoCAD.
ISO 9001 standards and accreditation.
cGMP and validation experience.
IEEE member

EDUCATION
1985-1991 University of Science and Technology of Oran Algeria
Bachelor of Science of Electronic Engineering (BSEE)

REFERNCES:
Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2251 to 2300 of 6411)

Go to Search Parameters...

Brief Description

I am having masters degree in instrumentation and 2 years of experience in Automation industry in which I did Develpoment, execution & commisioning of automation projects using SCADA (InTouch, Citect), PLC (Allen Bradley, Omron, Siemens) and different types of controllers and communication devices.

qualiy inspection

Instrumentation Engineer with 5+ yrs experience in Automation industry and Power Plant Industry.

Sub : Application for the post of materials engineer/materials controller/ logistics co-ordinator in materials department.

Bachelor degree in Electrical-Electronic Engineering. Had been working as metering engineer since 2003. leading the validation team for gas and liquid metering validation and also servicing.calibrating and validating all flowmeters,turbine meters and PD meters at workshop.

Utilized HYSYS simulation,• Equipment Sizing, Line sizing and Hydraulics, Pump selection, Heat & Material balance.

TWO YEARS EXPERIENCE IN MECHANICAL ENGINEERING SIZING, DESIGN / DRAUGHTING OF EQUIPMENTS & PIPING, SAFETY TRAINING & AWEARNESS IN OIL & GAS INDUSTRY WITH PROFICIENT USE OF DESIGN SOFTWARES & MICROSOFT PACKAGES.

I started my experience as a offshore engineer and now i am working on pipes and spools for a turkish factory in china

Oil & Gas Process Technology / Senior Process Engineer

I am Geologist with Master degree at Texas Tech University and I am working in Reservoir Engineer and Petrophysics. I have 10 experience at oil industry

i graduated from university in July 2001 after successfully completing bachelors and masters degrees in mechatronics engineering, i am extremely interested in a career in the offshore industry especially in the area off drilling and MWD/LWD

I am well qualified engineer, have strong administrative abilities, and also possess sound background as Quality Control Consultant. I would like to work with a company that provides strong career building opportunities as well as helps to enhance my engineering/administrative abilities.

with a master degree in engineering and more than ten years experience at level of project manager, looking for an engineering job in the field of construction or offshore engineering.

A competitive technical position in the Engineering field, where my skills can be further applied and developed.

Piping/Civil/Structural design and drafting. AutoCad 2002 certified.

HSE advisor with 12 years experience in the oil and gas industry, in on shore and off shore construction projects. Excellent knowledge about international standards and practices to achieve safe job sites.

I am a graduate surveyor from New Zealand Looking for opportunities in the exploration industry. New Zealand Graduates are world renowned for their high quality of work, a reputation I intend to uphold.

A highly qualified and experienced Telecommunication Engineer with over 13 years in all aspects of Telecom. Engineering with international companies in the middle east.

Seeking a Challenging Assignment in Instrumentation Running Maintenance / Planning / Construction Engineering opportunity leveraging my Skills, Experience With an organization as an Instrument Supervisor / Inspector / Specialist

DCS Engineer with Instrumentation background who has been involved in Power Plant and Oil & Gas jobs worldwide in an engineering and comissioning role with clients engineers.This role included leading a team of engineers and management of various systems.

As my resume indicates, my career spans more than 4 years of progressive experience and professional training in Reservoir, Production, Surface and Facilities Engineering, with experience in areas such as Research, Technology, Sales and some Field Operations.

Project Planning/Scheduling and Controls Engineer with 7 Years of rich Inter/National Experience in Oil/Gas & Chemicals (PRIMVERA known)

6 Years professional Experience in PLC, SCADA & HMI Programming

Petroleum Engineer with more than 23 years of total experience as a professional in the Oil and Gas Industry. Where I developed knowledge in Exploitation, Production, Treatment and Delivering of petroleum, gas and effluents water.

Instrumentation, Control system, quality and compliance Engineer, fluent in English, French and Arabic

Sr. Instrument Technician

I am a diploma holder in electrical engineering, having 10y experience in electrical & instrumentation designing and drafting for oil & gas, petrochemical projects. Also worked for leading companies (Adco, Adma-Opco, Enoc, Technip-Auh, Zadco etc)

Installation,Maintenace,Servicing of Diesel & Gas Engines. Maintenanceof Steam&Gas Turbine, air&gas Compressors,Pumps,Turbochargers, boilers, vessels, Exchangers and Piping. Corrective, Preventive, Refurbishment maintenace planning using SAP CMMS, MS Project. Knowledge of API,ASTM,ASME,DIN standards

Engineering executive with over 11 years of intl exp, in the positions of increasing responsibility in renowned EPCC companies in Oil & Gas and Power industries. Reputation for consistently beating the time deadlines. Fully capable of effective management of large engineering projects.

OBJECTIVE Seek a full time position as a reservoir engineer in the area of well performance, water flooding performance, reservoir recovery mechanism, and reservoir characterization. Especially interested in multi-discipline teamwork.

looking for QC/NDT Engineer

Front end/detail design for refineries, upstream oil & gas, petrochemical plants. Control and automation systems for oil and gas projects. Experience in managing large size engineering work. Project management, planning, cost control functions associated with LSTK projects.

Presently working as an Inspection Engineer for their contracts in P.I.C. running plants of UREA 3150MTD AND NH3 (AMMONIA) 1880MTD PLANTS at Shuaiba, Kuwait.

PhD in Process Integration, Experience in chemical process synthesis, design, and optimisaiton, research in separation processes, synthesis of batch distillation processes, reactive distillation, pressure swing adsorption

10 Years of Working Experience as Planning/Scheduling Engineer, Cost Control Engineer and Quantity Surveyor to Several Projects in Saudi Arabia, Algeria, Singapore & Japan. Expert Level in Primavera & Microsoft Office, MS Project & ACCESS.

Field of expertise includes the following: AutoCAD releases 10 to 14, 2000 and 2002. Familiar with AutoCAD, Microstation & Microsoft (office) software

Education: HNC in ships engineering. Work experience: 12 years as ships engineer on tankers, 1,5 years ass. maintenance manager of a liquid bulk terminal in Thailand with products such as styrene monomer and ethylene and 7 years as maintenance manager in this liquid bulk terminal.

• Quantitative earth scientist • Strong analytical skills • Advanced technical and computer skills • Excellent multi-lingual communication skills • Significant international experience

Strong verbal and written communications skills, highly organized, proven ability to plan, detail oriented, self-motivated, dependable, ability to interact well with customers, employees, at all levels of management. Willing and available to travel (Domestic and International)

18 yrs of EXPERIENCE in O&M FIELD AND CONSTRUTION.WORKED IN WORLDS LARGEST REFINERY PROJECT AT JAMNAGAR,ANDIN POWER PLANT,AND PRESENTLY IN INFOCOMM PROJECT.THROUGH KNOWLEDGE ABOUT POWER GENERATION AND DISTRIBUTION SYSTEMS, AUTOMATION, CONTROL ENGINEERING, MOTORS, PUMPS.

This is my resume which is appropriately suited for all engineering and operations jobs.

I have 12 years experience in the Oil & Gas industry on the IT & Telecommunications area. My last work experience was with CMS Energy Oil & Gas as the IT & Telecommunications Manager for West Africa family based in Equatorial Guinea.

Master of Science in Petroleum Egineering , Bachelor of Engineering in Petroleum Engineering

CAPABILITY THERE BY CONSIDERING THE QUALITY IMPLICATIONS OF ALL WORKS UNDERTAKEN BY RECOMMENDING ACTIONS RESPECT TO THE PROJECT SCHEDULE AND ACCEPTANCE ENGINEERING PRACTICE THERE BY MAINTAINING UNINTERRUPTED PRODUCTION WITH QUALITY AND STANDARD

Procurement & Supply Chain

A position of dynamic and energetic person to work as a "Process Engineer" with growth, potential and challenging environment to utilize my strong interpersonal abilities and technical skills for achievement of organization wellbeing.

Seismic Acquisition design and Seismic Acquisition Field Supervisor.

•Extensive hands-on, good knowledge and 4years solid working experience in Project management ,calibration, testing, design, application, installation, repair, troubleshooting and commissioning for wide-range of Electrical, instrumentation and controls of FPSO, oil and gas, petrochemicals, pharmace

Senior Geophysicist with 8 years experience in E&P company, solid background in structural and petroleum geology. Experienced in prospect generation and evaluation, total command over Windows Office suite (Word, Excel, Power point), fluent in English and Arabic.

More than three years of experience in start-up and operation of PET resin and polyester yarn plant as an Instrumentation Engineer. Hands on experience in Fisher Rosemount Delta V DCS and plant instrumentation and controls.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 [ 46 ] 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out