Resume - Qualification; B.Sc (chemistry), Skills; plant operation, precommissioning and c...

Misco Jobs

Resume #28241

CONTACT INFORMATION:
View contact information...

* EDUCATION QUALIFICATION:
Graduate In Chemistry In 1993 From Sardar Patel University, Vallabh Vidyanagar, Gujarat.

* WORK EXPERIENCE:
11 Years - at present I am working with N-PARAFFIN PLANT of NIRMA LTD. Alindra Site, Savli, Baroda. Since January 2005 to till date, as a PRODUCTION TECHNICIAN.

- NIRMA LTD., BARODA complex is a fast track grass root Petrochemical Complex, and N-Paraffin Plant having 65000 MTPA AND technology supplied by M/S UOP Inc., USA

- ABOUT WORKING SECTION & NATURE OF WORK.

Prefractionation And Unionfining (Hydro-Treating) Section Removing Light Fraction (C 7- C 9) & Heavy Fraction (C14 –C 17). Finally get the Heart Cut (C 10- C 13) of Kerosene by Distillation.
And In HYDRO TREATING: - Remove Sulfur And Nitrogen from Feed stock by HYDRO-TREAATING in presence of Nimox Catalyst With High Pressure System. (85 kg/cm2.)

- Worked with Gulf Stabilizers Industries, Jubail, Kingdom of Saudi Arabia as a DCS Operator since 3rd August 2001 to June 2004. (From commissioning)

* THE COMPANY:
- Gulf Stabilizers Industries is a joint venture between Great Lakes Chemical Corporation, U.S.A. and Al-Zamil group of Ind., Saudi Arabia. The Company is engaged in the manufacturing of Polymer Additives and its intermediates having capacity of 4000 MTPA. The process is operated batch wise by as well as continuous.
Implementing DCS of Yokogawa Centum CS-3000.

* Worked in VAM ORGANIC CHEMICALS LTD. as Sr. Plant Operator / Panel Operator From Feb. 2000 to August 2001. DCS System Fisher Rosemount Delta-V. (from commissioning)

* Special experience of commissioning of (DIESEL HYDRA DE-ULPHORISATION) at Plant owned by INDIAN OIL CORPORATION LTD, West Bengal from MARCH'' 99 To JAN'' 2000 as a ''Commissioning Operator.''

* Worked in METROCHEM INDUSTRIES LTD. in H-ACID DIVISION as a PLANT OPERATOR & then I was promoted as Plant Chemist for a period of 1year & 7 Months (SEPT''97 To MARCH''99)
(from commissioning)

* Worked at BHARAT STARCH INDUSTRIES LTD. Plant located near Padra, Karkhadi.(THAPER GROUP) of companies for a period of 1 year & 6 months (Oct'' 95 to Sep'' 97) as PLANT OPERATOR & then I was promoted as a DCS Operator.

* Worked at GUJARAT STATE FERTILIZERS & PETROCHEMICALS LIMITED, Baroda for a period of one year &six months (April 94 - Oct 95) as a Plant Operator.

* JOB RESPONSIBLITIES:
* Ensure normal operation of plants and equipment:
* Handling High Pressure Hydrogen 4-Stage 4-Cylinder Double Acting Reciprocating Compressor. (80 kg/cm2 pressure).
* Handling High Pressure High Speed Sundyne Pump. (100 kg/cm2 pressure).
* Handling High pressure Hydrogen Service Single Stage Double cylinder double acting reciprocating compressor. (90 kg/cm2 pressure).
* Handling Hydro treated Reactor (Two bed with interbed Quench) with Nimox (Nickel Molybdenum Oxide) on alumina base (85 kg/cm2 & temp. 3300c).
* Routine checkup of all processing equipments, machineries, Fire and safety equipments.
* To look after all the plant parameters, monitoring and controlling process parameters ensuring safe and smooth operations by minimizing down time and maximize production.
* To solve problems by means of effective communications.
* To ensure process parameters as per safety standard / guidance.
* Tanker loading and unloading etc.

* COMMISSIONING ACTIVITIES:
* Thoroughly knowledge in review & analysis of PFD & P&ID.

- Handled activities starting from erection, pre-commissioning, commissioning which includes hydro testing, flushing, blowing, vacuum test, calibrations, and equipment trials, leaks testing Plant start-up, emergency shutdown & trouble shooting.

- Preparing SOP for pre-commissioning and commissioning activities.

* ASSETS:
- Experience in pre-commissioning & commissioning of a chemical plant. During this period, active participation in commissioning of the following systems: -

- Fired Heaters, Reactors, Distillation columns, Vacuum system, Steam Generation system, Chilled water, Refrigerant liquid system, Ammonia Chilling System, Tank farm, centrifuge, filters & Dryers, multi stage
Pumps compressors, Auto claves, high pressure and high temp. Reactors, hydrogen bullets, heat exchangers, turbine, charge heater, flare header, ammonia bullets, various type of valves and etc…

- Handled different types of pumps, compressors, distillation columns, reactors, filters, centrifuges, etc.

- I am thoroughly conversant in operation of DCS, emergencies, startup & shutdown of plant, monitoring of process parameters ensuring proper safety measures in all operations.

- Knowledge of handling chemicals like Methanol, Steryl Alchohol Toluene, Methyl Ethyl Keton, Cyclohexane Phenols, Methyl Acrylate, HCL, H2SO4, Acetic Acid, diesel, ethylene oxide, TMA, KOH and etc.

I have ability to work with international force with good communication skills.

* DCS HANDLED:
* Yokogawa Centum CS - 3000
* Fisher Rosemount (Delta - v)
* Fisher Rosemont (RS -3)
* Yokogawa Centum CS - 1000.

* TRAINING ATTENDED:
* Operation & monitoring of Yokogawa CS3000 system Conducted by the Middle East (Duration - One Week)
* ISO 9000:2001awarness course conducted by Steve Hills Associates, U.S.A.
* Permit to work system course likes cold work, hot work, vessel entry incident reports conducted by Gulf Stabilizers Ind.
* To operate fire extinguishers and fire hose handling.
* To wear SCBA set. (Self-continent breathing apparatus)
* Use of fire fighting equipments by conducting mock drills with team of SABIC and civil defense.

I played a vital role in all Commissioning and Pre-Commissioning activities in all the Systems Mentioned Above.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 3201 to 3250 of 6390)

Go to Search Parameters...

Brief Description

CFD (Pursuing), SAP (Maintanance)

HSE SUPERVISOR AND MAINTENANCE PERSONNEL

Mechanical

I am a graduate of Mapua Institute of Technology –Manila completing the course of Bachelor of Science in Mechanical Engineering. I also went through a long experience in technical works and responsibility aside from my Tertiary Level experience, Don Bosco Technical Institute –Makati gave me the know

I graduated from University Putra Malaysia with a Bachelor in Chemical Engineering. I majored in Process Engineering and have done equipment designing for my final year project. I active in my co-curricular activities. I can speak 6 languages and is computer literate.

Done Electrical Engineering, i can work in any kind of hard circumstances, i want to use my engineering knowledge in to the work...

I want to apply for the post of Petroleum Engineer with major interest area being drilling engineering. I have the theoretical knowledge of Drilling, Well-Logging, Reservoir Engineering, Well-Completion, Well-Testing, Gas Engineering, Polymer Engineering, Software Engineering, Petroleum Exploration.

Wellsite Geologist with 25+ years haved worked as comp man, DD, mudlogger, etc

I have completed my engineering in Electronics and Instrumentation and i have computer hardware knowledge and i worked for a us process i can work in any shift as i was use to it and i am a harworker and i can graspe things easily once given training i can prove myself and i very interested to work

I am chemical engineer with 14 years experieced in corrsion inthe industrial water treatment, process units, coating, cathodic protection, and chemical injection.

Mechanical/piping design experience with knowledge of several CADD tools and computed based softwares use in this field.

Energy conservation, energy audit

Skilled Engineering Project Manager for multidisciplinary EPCM services for the oil and gas industry, accountable for maintaining good client relations and satisfaction. Positions accountable for safety in design, time and cost/benefit management.

To obtain a Full Time Chemical Engineering, Chemist or Quality Control position starting from February 1, 2003.

An innovative and intelligent Electronic Engineering Graduate who is hardworking, self-motivated and responsible. An articulate and outgoing personality that remains confident and good-humored under pressure especially when meeting tight deadlines set by the oil industry.

I graduated Faculty of Wells Drilling & Exploiting of Oil and Gas Reservoirs, within Oil and Gas Institute from Ploiesti

I am interested in work overseas. 15 years mechanical engineering experience in India, Malaysia, and Middle East

NINE (9) YEARS EXPERIENCES IN OIL AND GAS ENGINEERING DESIGN AND PROJECT MANAGEMENT CONSULTANCY SERVICES WITH 18 MONTHS IN THE UK

I am a recent graduate in Mechanical Engineering from the University of Washington.

Highly motivated, team-oriented individual with excellent communication skills. Two years of industry experience with Turner Construction-USA & NESPAK-Pakistan respectively. Prepared budget reports, schedules, estimates and bill of quantities and performed engineering supervision of various trades.

Surveyor

Network/System Engineer/Administrator with 4.5 yrs of experience primarily in the integration and implementation of internetworks and managing the system support team.Designed routed WAN and switched/shared LAN based on Cisco Products.

I am graduated Middle East Tecnical University as a Petroleum Engineer in 1995 and started to work in the industry in the same year. My professional bacground has covered reservoir engineering, production engineering, workover & completion engineering in Azerbaijan, Kazakhstan, Houston and Turkey.

Well organised and reliable Geoengineering professional with excellent presentation and interpersonal skills. Experience of various hardware and software.

SKILLS: M.S chemical engineering with strong background in process design, process integration, simulation skills and successful industrial experience.

Petroleum and natural gas engineering, BSc Earthsciences, MS Candidate

Finishing my MS degree in geology and am looking for a career. I am willing to travel and/or relocate. I can legally work in the US, Canada, and Europe (UK citizen).

cnc supervisor,programmer,cad/cam

QA/QC, PIPING DESIGN OR PRODUCTION ENGINEER FOR THE BOILER &OIL FIELDS

Piping layout,isometric cheking,bill of material making,auto-cad

Metallurgical and testing/corrosion/QAQC for oil and gas industry.

Onshore drilling HSE Advisor

POST GRADUATION –Completed Autonomous Post Graduate Diploma in “PIPING DESIGN ENGG. & CONSTRUCTION” From Trinity Academy of Professional Training, Pune in the Year 2007.BACHELOR OF ENGINEERING – MechanicalYear of passing – 2007Completed graduation in Mechanical Engineering from “Babasaheb Naik coll

Flexible senior mechanical engineer, with high communication skills.

To secure a challenging position where I can effectively contribute my skills for the betterment of the company, possessing competent technical skills.

Rotary engineer in reliance industries limited,strong in auto cad,ansys,pro eng

I have 21 years of professional experiences with several EPC Companies (Snamprogetti, ABB, Technip and etc.) and Clients (AGIP, CHEVRON) overseas in Civil Construction / Project Management Team.

To become an asset for your organization and to contribute to the quality and growth objectives of my workplace, in the process the endeavor will be to combine. My creative and professional skill.

Piping Engineer, Mechanical

Environmental Engineer/Scientist with over thirty years of experience with project and program management, industrial hygiene, hazardous waste and material management, modeling, monitoring, regulations, risk and technology assessment, pollution control, and environmental remediation

Fifteen years experience in the oil and gas industry. Five years overseas work experience in Libya and Indonesia. Experience working on onshore and offshore projects. Experience with a variety of equipment including centrifugal pumps, gas compressors, pressure vessels, piping.

Seeking a challenging career with in a reputed Company

This is essakkipandi, I have 6 years experiance in oil & gas industryI am working in Flour daniel India )p) Ltd,Delhi as Instrumentation Designer. I have studied Diplomo in Electrical & Electronics Engineering, Now i am lookink for Instrument designer join in USA.

Summary of Qualifications. Eighteen years of documented success in the design, oilfield and construction industry. ·Experience on project and design working extensively with the Designers and Engineers.

Engg.graduate with exp.in projects at various Breweries in India

Senior Qa/QC For Oil/Gas Projects

Qualification; B.Sc (chemistry), Skills; plant operation, precommissioning and commissioning

LP Modeling, Refinery Planning & Scheduling, PIMS, Process Simulation and Optimization

Certified PMP, with Onshore & Offshore Projects Experience with good Communication skills. Qualified Mechanical Engineer with Project Management skills & Leadership qualities.

My working career is coverd with Petrochemical plant structural detail design and offshore jacket type platforms basic and detail design.In the field of offshore i am qualified in in-place, earthquake, dynamic, spectral and determinestic fatigue, transportation, lifting and lunch analysis.

First Prev 51 52 53 54 55 56 57 58 59 60 61 62 63 64 [ 65 ] 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out