Resume - Resume for the job in maintenance or operation field.

Misco Jobs

Resume #2826

CONTACT INFORMATION:
View contact information...

Geologist with 20 years Practical Experience

I am performing my duties as Maintenance Shift Leader in Procter & Gamble Pakistan from Jan 1999 up to date in maintenance department.
Job description about rotary equipment
* Fault detection and maintenance of Centrifugal, vacuum and Reciprocating type pumps.
* Fault handling And Maintenance of Stem Generator
* Operation and Maintenance of Screw type compressor
* Preventive maintenance of soap boiling plant
* Maintenance and operation of power generator
Job description about static equipment
* Maintenance of soap Sponefication plant
* Maintenance of Heat exchangers (shell & tube and plate & frame type)
* Maintenance of Globe valve, Ball valve, Safety valve, Pressure control valve, Temperature Control valve, pressure Regulator etc.
* Designing and Fabrication of broken parts of equipments.
Regarding fabrication I have full command
On following machines
Lathe, Milling, Shaper, Surface Grinder, cylindrical Grinder Jig boring machine, Jig Grinder, Gear Hobbing, Shaving.
Shut down job experience.

I have performed my services in LASMO oil field during their shut down for instrumentation work under supervision of OMV ENGINEER.
I worked there at Finger type Slug Catcher (180ft) because I was involved during installation of it and I was also involved during Calibration and installation of off skid instrument
Instrument that was calibrated by our team
Pressure control valve
Temperature control valve
Temperature indicator (Rosemount)
Pressure indicator (Rosemount)
Shut up valve.
Computer Knowledge

Maintenance leading software MPII
MS Windows 98 & 2000
Auto CAD Release 14&2000
MS Office 97 & 2000

Special Trainings
Trainings regarding safety

1. Basic HS&E
2. HS&E DMS
3. Work & Safety
4. First Aid Procedure
5. Basic H.S.E (Held in Lasmo by OMV safety system owner)

Trainings regarding Quality

1. QA Induction
2. Total Quality Fundamental
Note: (All the Trainings Held on Hub Plat except Basic HSE)

Qualification

Technical Qualification

1998 Three-Year Diploma of Associate Engineer (D.A.E) in Precision Mechanics & Instrumentation Technology with First Division from "Pak-Swiss Training Centre Karachi."
Academic Qualification

1995 Metric Technical School Certificate (T.S.C) With A-one Grade from "Sindh Board of Technical Education Karachi."
Extra Qualification

I am doing one-year Diploma in well drilling from WDI
Course Content

1. Elementary Geology 4. Petroleum Exploration.
2. Drilling techniques 5. Introduction of HS&E
3. Introductory of geo physic 6. Drilling fluids and Mud.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1951 to 2000 of 6410)

Go to Search Parameters...

Brief Description

Working knowledge of marine diesel propulsions and electricity generation systems. Familiar with mighty power engines. Knowledge of support systems such as fuel centrifuges, air compressors, pumps, hydraulics, refrigeration, heating, and air conditioning.

Provide diverse engineering technical support for research, reporting and production. Work history includes oil and gas production, oil and gas debt and equity capital transactions, and oilfield equipment.

I have worked both on and offshore for 30 years. I have also worked in shipyards, including writing commissioning procedures, commissioning equipment and writing preventative maintenance procedures. I have current offshore survival and medical certificates. I am immediately available.

Multi-disciplined sub sea engineer, extensive experience gained in the design, selection, operation, maintenance and acceptance testing of well control equipment, working in a variety of different environments to the standards specified by the manufacturer, drilling contractor and operator

I have been in the offshore industry for more than 23 years, my recent experience has been with new build drilling rigs as Commissioning Manager; Team Leader Mechanical and Piping Systems; Project Superintendent. Previous 14 years experience was with the British merchant navy as an engineer officer.

Seeking a full time position to actively contribute to the technical achievements of a company in the oil and gas industry

QA/QC Welding Inspector

Resume for the job in maintenance or operation field.

More than 26 years experience directly involved in the offshore oil and gas industry. Experienced in detailed structural engineering, fabrication and installation of offshore platform topsides including floatover installations and Floating Production Platforms.

SCADA Specialist

25 years in Oil& Gas, Power and Petro-Chemical Industries. I am a multi disciplined QA/QC professional. Safety oriented, team oriented, quality oriented, and production oriented. I have organizational and managerial capabilities. I would look forward to an opportunity to serve your interests.

Eleven years of experience in design, development, testing and implementation of Application Software.

BS in civil engineering and MS in structural engineering. Have worked as a civil/structural design engineer for 14 years in petrochemical plants design and construction. Skilled with MS office, Staad-Pro & Risa3d. Familiar with AutoCAD. Contract only.

Senior Networking Engineer

Casing design and selection, cement slurry design, BHA design, hydraulics calculations, BHA design, drill bits, drilling fluids design, solids control equipment, drill strings, well control methods, surface equipment, directional drilling. Schlumberger Drilling Office Software & TDAS.

Did M.Tech in Petroleum Engineering and B.Sc. Engineering in Mechanical discipline.

5 year experiance in rotating equipment field. Experiance includes service, manufaturing, engineering, sales and marketing

Working in siemes power generation having 11 year exp.

Broad experience in mid-stream and upstream oil and gas production and facilities. B.S. double major Petroleum and Chemical Engineering. M.S. Environmental Engineering

To seek a challenging position that will utilize my expertise in the field of Process instrumentation. And have an opportunity to work with highly professional group of people, hence to achieve personal growth, satisfaction & welfare of our organization.

Hi, my name is Pervez Iqbal, I am a mechanical engineer with 7+ year experience in my work. I am searching a job for myself in the US. My work status is permanent resident/green card.Currently I am living in California, but willing to relocate near my job area . I have work experience in CAD/CAM de

Material Selection,Welding Procedure Specification(WPS), Non Destructive Test Procedure(NDT)

Experienced and Professional I&C Engineer

More than 7 years seismic acquisition, processing, Interpretation and reservoir Geophysics experiences with several major seismic companies and seismic processing contractor company.

Possess Degree in Engineering and more than 10 years of Professional Experience in Project Planning and Controls through various project phases such as Front End Design, Detail Design, Procurement, Manufacturing and Construction for various Oil & Gas, Petrochemicals & Chemical projects.

I am a Petrophycisist with 8 years of experience

Multi-disciple project engineer covering, electrical, instrument, mechanical, piping work etc. Gas Turbine & High Voltage Power installation work. DCS work. Contract Management / Planning / Cost/ Commissioning, Training, Maintenance,. Vendor Inspection. Contract estimation work, QA/QC/QS.

Senior Operations Technician with over 25 years of experience as control room panel man/ field operator of LNG Plant, Jetty coordinator LNG. High pressure hydro cracker (isomax), hydrogen plant, CDU, Vacuum distillation and Visbreaker units. National Diploma in Technology Chemical Engineering

I want to work as Instrument Foreman/ Technician with good knowledge and experience in Process Instrumentation in Power plant and Desalination Plants.

Resume for Material Engineer who is Having exposure in SAP and PRIMAVERA.

My total professional experience is more than 11 years including 9.8 years of Petrochemical field of Oil refineries (PARCO & NRL Pakistan) & Oil/Gas field. Currently I am doing rotational job as Maintenance Planner with Occidental Oman Inc on Safah Oil & Gas Field Oman since July’07.

Chemical Engineering Graduate working in Oil& Gas Upstream Industry more than 4 years who seeking a position, which utilize my skills and abilities to the optimum level and which also, offers scope for personal and professional growth while being sincere, diligent and hardworking.

Drilling Fluids Consultant

I am Interested in joining your company, I am Currently working in an Oil ang Gas Safety Company as a Safety Officer/H2S Safety/Fire Tech in Offshore and Land Rigs. I am fully equipped with safety trainings and knowledgeable about the Rig Safety and Drilling Operation.

As a Reservoir Development geologist I have worked mostly with unconsolidated clastic sediments designing geological models by combining cores, well logs, seismic data and petrophysical models forward design the navigation pattern for horizontal wells drilled through these sedimentary bodies.

Professional with 4+ year’s oil field exploration rig experience - willing to travel and relocate. Enthusiastic oil safety professional with proven skills in: Oil and Gas Exploration and Characterization Petrophysics Seismic Attributes, Seismic Inversion Seismic Interpretation

Dimensions of my career profile extend to in depth knowledge of electrical design and detailed engineering activities for the project related to chemicals, petrochemicals, oil and gas plants. Qualification: Bachelor Degree in Electrical Engineering, Exp: 5+ years,

Engineer - Technical Support and Design LPG SNG GAS Operations

Participated in conducting FAT/SAT of Foxboro SCADA., Participated in conducting FAT/SAT of Ascom PDH/SDH Telecom System. Went for 15 days training for Administrator and Operator training on Foxboro SCADA System at Foxboro Rome, Italy.

Responsibilities include working in PLC systems, Microprocessor controls and various conventional pneumatics and electronic instruments, all of which require the ability to read & understanding engineering drawings such as P & IDs, loop drawing and ladder logic drawings.

I have hands-on experiene in the field of Oil&gas, refinery as well as Petrochemical for past 10 years in Indai as well as Guld. I was invloved in the Control System FAT, Power-up, SAT, Hot/Cold cut over and Maintenance.

Engr, design, & spec of process instruments with field instrumentation, PLCs, & DCS's in refineries & petro-chemical plants. Created schematics, loop diagrams, install details, location plans, & data sheets. Proficient in AutoCAD. 100+ university hours in Industrial Tech & Instrument Technology.

CADD Drafting, Geo-Tech or Digitizer

Worked in Oil/Petrochemical/Refinery projects for a period of 21 years as Manager Construction.

I'm a skilled Well Engineer with a wide experience in well construction, stimulations, completions, and workovers. Strong team management and communicational skill with experience to manage the complete well engineering process from well design to drilling execution of exploration projects.

Develop plant layout. Nozzle orientation. Check vendor prints. Prepare detailed drawings. Modeling 3D and Isometric. Job control and records. Pursue codes, standards and specifications. Assist construction. Maintains job control and records. Check work for accuracy. Prepare punch list.

14 Years of experience in OIL an Gas Industry in Venezuela Engineering experience in Oil Treatment Plants, Compressor Plants, Oil and Gas Gathering Systems, Pipelines, Rotating Equipment.

I wish to apply for a position as an Instrumentation or/and Electrical or a Process Technician. I have 22 years experience in the Instrumentation and Electrical field. I complete my T4, I pass my Instr. trade test. I write my wireman’s license and also my Elect trade test.

I am having total 15 years experience in design field, 5 years in manufacturing detail designing in valve industry-fouress, 5 years in hvac & pollution control field- abb/flakt, 5 years in design consultancy firm - chemtex- pds 4+ years exposure.a

Engineer with 25 years experience working with pumps, compressors and gas turbines in offshore, petrochemical, refinery, power generation and water injection projects

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 [ 40 ] 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out