Resume - Planning and Cost control Engineer with 10 year experience in Oil, Gas and Petro...

Misco Jobs

Resume #2866

CONTACT INFORMATION:
View contact information...

CURRICULUM VIATE

Planning and Control Engineer

Introduction

I am an Engineer and Post Graduation Diploma in Management whose speciality is Planning and Controlling. I have about 10 year of Experience in Oil, Gas and Petrochemical Industries. My Nature of work and responsibilities are as follows:

Nature of Work and Responsibilities:

I am adept at developing project plans and schedules using Primavera project planner, Microsoft Project. I have developed plans for EPC & LSTK contracts (Engineering, Procurement, Construction, Testing, Commissioning), I additionally track and update all progress related curves and documentation including management and client reports

My duties include identifying Critical path and sub-critical paths in schedules and monitoring them closely for timely and economical completion of projects, Monitoring & updating of project schedule progress on regular intervals, identifying Deviation from original plan, Identifying Delay and hold points and reporting corrective action necessary to achieve original Planned progress.

My duties additionally relate to agreement on physical progress with client and Processing of progress invoicing, control and monitor of Sub-contractors progress and progress invoicing and developing various report of Real time information for Management which guides decision-making.: Manpower requirement and Usage, Project Planned Progress and actual progress. Hold and Delay reports, Various Graphic report (S Curves) etc.

Cost-control of the project, preparing cash flows, revenue distribution, cost distribution, cost-do date, cost to complete etc. Checking sub-contracts and Purchase orders, to ensure compliance of terms and conditions.

Identifying Cost reduction possibilities and implementing them for economic good of project.

Checking and evaluating quotation and bid from supplier, preparing bid comparison analysis, commercial and technical review of quotations and estimations, negotiation of price reductions ensuring technical and logistic integrity.

Co-ordination among Engineering, Procurement, Construction and Commissioning Teams

Identifying Schedule and cost impact of various event of project. Preparation of claim for impacts.

Contract Administration, Supervising Compliance of various contracts.

Europe Experience: Worked in ABB (Asea Brown Boveri) limited (CHHOS), Zurich, Switzerland on several projects.

1. Personal Information

Date of birth: 23rd September 1972
Age: 31
Gender: Male
Marital Status: Married
Nationality: Indian
Drivers license: Motor Vehicle

Language Proficiency
English Arabic Hindi/Urdu
Speak Excellent Basic Excellent
Read Excellent Basic Excellent
Write Excellent Good

Computer Literacy: Primavera Project Planner / Microsoft Project / Word / Excel / Access / Powerpoint / Lotus 123, Lotus Notes & Databases, SAP R3, In house software for Cost Control, Material and inventory control etc.

Home Language: English
Condition of health: Excellent
Criminal Record: None
Leisure time: Cricket

2. Training and Qualifications

2.1 Education: School

High School Diwan Ballubhai High School
Highest Qualification H.S.C.

2.2 Education: University (Engineering)

Name of University Gujarat University, L.D. College of Engineering.
Highest Qualification Bachelor of Engineering (B.E.)– Electrical

2.3 Education: Management

Name of University: IGNOU, School of management studies,
Highest Qualification: Post Graduate Diploma in Management (PGDIM)

References will be provided on request.

WORK EXPERIENCE:

Company – 1:S.A. Kent Co. Ltd., Al-Khobar, K.S.A.
S.A.Kent Co. Ltd. (SAK) is a West European KENTZ group company operating in Saudi Arabia. It undertakes EPC, LSTK projects in Oil & gas, Power, petrochemical and refining field.

Period: from 1998 to till date

Designation: Planning and Control Engineer

Project–1) Saudi ARAMCO COS (Crude offshore), COT (Crude Oil Terminal) and NGL (Natural Gas Liquefied) Refinery. Yanbu – K.S.A. Facility Expansion project

Project–2) Saudi Aramco NGL (Natural Gas Liquefied) Refinery. Yanbu – K.S.A. It is Product/Feedstock pipeline project.

Project–3) Saudi Aramco Gas & Oil Separation Plant (GOSP) – 3 & 4 at Abquaiq. It is a GOSP expansion project.

Project–4) Yanpet Expansion Project, Yanbu Petrochemical Co. Ltd., (A SABIC Group Company) Yanbu -K.S.A.It is a fast track project for a modern-high-tech production facility of Ethylene, Propylene and ethylene glycol.

Project–5) Kemya Olefins Ltd. Jubail – K.S.A. Kemya olefin is a SABIC (Saudi Arabian Basic Industrial Corporation) group company. It is a fast track project for a modern production facility of Olefins.

Project–6) Saudi Polyolefins Company (SPC). Jubail– K.S.A. It is SABIC Group Company establishing new petrochemical complex.

Project–7) Saudi Electricity Company-Eastern region board (SEC-ERB) 380 kV GIS expansion at FARAS and SHEDGUM– K.S.A.

Company - 2: Reliance Industries Ltd. - India
Reliance Industries Ltd. (RIL) is a India's largest private sector company in terms of revenue and profit. It is a major Player in Oil and Gas, Petrochemical/petroleum industry. It production facility produce variety of Oil and Gas, Petrochemical/Petroleum products.

Period: From 1994 To 1998

Designation: Project Engineer

Project: project is to build Greenfield petrochemical complex production facility and all utilities.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2901 to 2950 of 6411)

Go to Search Parameters...

Brief Description

Proficient in Excel and in Word. Proficient in Primavera Project Planning software.

A graduate of University of Port Harcourt, Faculty of Science, Department Of Geology (Bs.c Geology) Rivers State, Nigeria. Working currently as a contract staff with Shell Petroleum Development Company Nigeria Ltd.

B.Eng. Electrical Electronics. CCNA-Abuja,Nigeria. IEEE-USA Member, Networking Telephony/Data, MicroSoftExcel etc, Travelling & Visiting New places

Engineering skills, AutoCad, MS Word

Petroleum and gas engineer.

Mechanical, Estimate/proposal engineer

Chemical engineer from pune university, looking for job in oil field .1 year exeprience in production unit

Highly motivated, creative and versatile chemical engineer with an experience designing refinery plant for a gasoline production from crude oil refineries. Especially skill in optimizing heat recovery by using pinch analysis. Excellent management, negotiation and public relation skills.

Instrument Engineer working in Consolidateed Contractos International company,Qatar.Working here in pre comissioning especially in loop checking and function tests . Have experience in DCS Foxboro and PLC Triconex with Invensys Systems.Working under Chiyoda Technip joint Venture for RasGas project-2

BS Electrical Engineering, 10 yrs experience instrumentation oil and gas industry, hardworking, computer literate: MS Word/Excel/Projects.

Electrical High Voltage Protection Technician

Specialist of Control System in Designation of Aromatic IV Plant in Borozouieh Petrochemical Complex in Assaluyeh and in consortium with LG E&C and Toyo, Preparation of DCS/ESD Loop/Logic diagram, Instrument Location Layouts.

I have over 13 years experience related to SCR drive Disel Electric Drilling Rigs, both in Service, Manufacturing, and Preventive Maintenance.

I am currently in my 4th year (finish Sept 2003)of a Masters degree (Meng) in Mechanical & Offshore Engineering at The Robert Gordon University, Aberdeen. Since May 2002, I have worked as a Student Engineer for a large service company within the petroleum industry, Weatherford

Project Information Manager/ Intergraph PDS Administrator & Support

Have a lot of experience if field operation specifically with coiled tubing.

Vibration Analyst / Machinery Engineer. 9 Years Experience. Working on Bently Nevada ADRE and CSI RBMWare. Fluent in English.

I also have 7 years of experience in analysis packages like STAADIII & In these seven years of service, I have directly worked in multiple functions proposal Engineering & Detailed Engineering. CAESAR,CFD.I am conversant with packages PRO-E, IDEAS, CFX.

Planning and Cost control Engineer with 10 year experience in Oil, Gas and Petrochemical Industry.

I would like to apply for Network Administrator or Network Engineer post in middle east countries

Control and instrumentation engineer with good experience in project management ,construction, commissioning in power plants and chemical industries.

I am a Chemical Engineer from Texas A&M University-Kingsville. I have my Masters degree in Chemical Engineering .I have earlier worked with BetzDearborn Ltd. in water treatment field for a 27000 MT refinery. At present I am looking for a job in the Chemical/Petroleum sector.

I would like to express my interest in joining your company if there a vacancy for me as an experienced mechanical engineer graduated from K.F.U.P.M in 1993.

Looking for a mechanical working environment, with open atmosphere, welcome new idea.

Objective: Process Engineer where I can contribute technically to a growing, global and environmentally conscious energy firm. Currently a student of M.S. Chemical Engineering at Oregon State University Expected graduation date-June 2003.Worked as a process engineer in a refinery for three years

Lead Inspector For Pipe mill team for Kinder Morgan project ,Anadarco petrolium project from last six months.good command on handling team. For Onesty first priority

I am a graduate civil engineer.I am proficient in: Pdms11.6, Staad pro (Certified by engineering staff college, Bangladesh), Etabs, AutoCAD, Micro Station-V8, Microsoft Visio & Ms Office.

Planning, Scheduling, Computerized Maintenance Management System - CMMS,

I believe my experience and solid record of achievement make me an ideal candidate for any engineering position within your organization. My enthusiasm for the position and my interest in working for your Company were strengthened as a result of searching.

Diploma course in autocad, working as a design engineer for past 1 year

I am a hard worker, willing to learn a new thing, initiative and creativities problems solver. I have qualities such as good personality, strong communication skills, and excellent ability in team working. I can communicate well with other people and enjoy being part of a team-work, especially if it

I am an Electrical (Electronics & Communication) Engineer determined to get thru in expediting the Projects on the basis of self learning and self motivation I have the hands on experience while working as a Sr .Application/Project Engineer in Innovative Automation and Engineering Private Limited),

I am qualified Mechanical Engineering having 6 years of Experience in the field of Mechanical Design of Static Eqpt such as Pressure Vessels, Heat Exchanger, Column, Reactors, Indirect Hype Heater, Storage Tank etc. Well versed with International codes like ASME SEC. VIII Div.1 & 2, UHX, TEMA, PD550

Solid academic formation in petroleum engineering. Native Spanish speaker, proficient in English. Computer literate in Autograph (Esp design), FoxPro (inventories), and MS Office. Available immediately, willing to travel and / or relocate.

Analyzer Engineer

Instrumentation and Control Engineer

Lifting Equipment Inspection Engineer, Senior Welding Inspector, Material Inspector, Product Inspector.

I have 1 year field experience and 2 year off-shore process design experienced.

B.E,HAVING SKILLS IN PDMS 11.5,UNDERSTANDING P&ID'S ,preparation of piping layouts

Welding , QC , WPS , PQR , WQP, Inspection , NDT

Process Design Engineer (B.E. Chemical)

40 years, Production, Workover, Drilling Supervision, Land and Offshore

Degreed chemical engineering with an Engineer-In-Training certification and two years of process engineering experience.

I am a self motivated and well inspire graduate of Geology. With Junior to intermediate level job experience in Petroleum geology. With interest in reservoir engineering, mud logging, well logging, reservoir geology, wellsite geology, log interpretation, data entry and field engineering

I have very good experience in field management in installation, commissioning of rotating equipments and auxiliary systems such as pumps, diesel generators, compressor etc. and pipe works including piping systems. In selecting the types and standards for static equipments.

Instrument/Process Control engineer with more than 17 years of experience in Plant/Project engineering, construction and commissioning of Gas/Condensate and petro chemical industries.

17 years experienced engineer

More than 22 years (16 years in India and 6 years in Saudi Arabia) in Electrical Power/Substation/ Managerial/ Electro-Mechanical /Petrochemical/ Geographical Information System (GIS), fields.

Have a strong :Managerial and technical skill, leadership skill, agent of change, interpersonal and intrapersonal skill, Communication skill, Good motivator, Familiar with API and ASME Codes Standards, Familiar with P&ID, Familiar with ITP, Familiar with Rotary and Static Equipments, Installing Rota

Senior Planner / Scheduler

First Prev 51 52 53 54 55 56 57 58 [ 59 ] 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out