Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #2867 next resume »»
CONTACT INFORMATION:
View contact information...

Dear Sir/Madam,

It is my pleasure to introduce myself to you as an Electrical/Instrumentation/Controls Engineer.

I have varied experience earned through honest means in Chemical, Oil & Gas, Petrochemical, Water treatment and other related areas by hard work, sincerity, dedication, team spirit and conviction. I have played very important roles in many successful projects, some of them completed ahead of time, in a wide gamut of areas both in India and abroad and am continuing to do my very best in Singapore. After my graduation from the most accredited University in India and serving many reputed Government, Public and Private Limited Companies in India for 9 Years including my assignments outside India, I migrated to Singapore in July 1997.I have since then been serving the best Private and the topmost Enterprise 50 Company until October 2001, in Singapore. After a brief stint of 2 months in another reputed company, I am now a Senior Electrical & Instrumentation Project Engineer for a top Government Linked Company in Singapore.

I am delighted to see vacancies in your Company and would like to offer my candidature since your requirements match my profile. As requested, I have enclosed my resume for your kind perusal.


Education: 1984 to 1988

First Class 4 Years Bachelors Degree in Electronics & Communication Engineering from the University of Madras, India

Professional Membership & Achievements:

1. Member, Instrument & Control Society, Singapore.
2. Member, IEEE,USA.
3. Confirmed and promoted earlier with greater responsibilities due to excellent demonstration of work ethics, knowledge & attitude by all Employers in Singapore and most of them in India.
4. Selected & Deputed by the Employer in India in 1996 & 1997 from a special brand of skilled Engineers to Netherlands, United Kingdom & Philippines for Inspection & Factory Acceptance Tests of Switchgear room, Training/Orientation of Erection/Testing activities & Inspection of Living Quarters Module respectively for some prestigious Oil & Gas projects.
5. SOC [ Safety Orientation Course ] Certificate Holder
6. Have played key roles in 4 Oil & Gas, 1 Water treatment (Sludge treatment works), 1 Petrochemical (Training centre) projects which were completed, some of them ahead of scheduled completion.
7. Acquired good knowledge in all requirements of Electrical/Instrumentation/Controls works in Singapore including Codes and Standards.

Targets for the next 5 Years:

1. To pursue Postgraduate/Doctorate programmes in Engineering/Management studies.
2. To apply for Professional Engineers (Electrical), Singapore Membership
3. To become a Chartered Engineer
4. To independently manage projects in the capacity of Project Manager.

Expected Salary: Negotiable

Professional /Working Experience - Summary:

Srl No Employer Designation Period Salary per month excluding perks & Bonus
1 SembCorp Industries, Singapore [ Present Employer ]{Confidential} Senior Project Engineer [ Manager Grade ] 18/12/2001 till date S$3500/-
2 Plant Engineering & Construction Pte Ltd, Singapore Senior Project Engineer 1/11/2001 to 14/12/2001 S$3200/-
3 Salcon Group of Companies, Singapore Project /Senior Project Engineer 21/7/1997 to 26/10/2001 S$3040/-
4 Larsen & Toubro Ltd, India Project /Senior Project Engineer/Senior Project Executive 17/8/1992 to 14/7/1997 Indian Rupees
5 Hindustan Organics Ltd, India [ A Government of India Enterprise ] Instrument Foreman [ Engineer Grade ] 12/11/1990 to 14/8/1992 Indian Rupees
6 Uptron India Ltd, India [ A U.P. State Government Undertaking ] Control Systems Engineer 17/2/1990 to 7/11/1990 Indian Rupees
7 J.K.Synthetics Ltd, India Assistant Engineer 17/10/1988 to 14/2/1990 Indian Rupees

Professional /Working Experience - Details:

A] Senior Project Engineer ( Manager Grade ), SembCorp Industries, Singapore
{Confidential}

1. Completely responsible for Electrical & Instrumentation/Control portion for Government & other Clients Projects / Tenders in the areas of Petrochemical/Chemical/Oil & Gas/Transportation/Power Plants, Singapore and the SE region.
2. The present Employer is a reputed and leading Design/Engineering/Consulting/EPC conglomerate serving many Government /Multi-national Clients in Singapore on EPC basis and have a formidable International presence with strategic mergers, acquisitions and Joint ventures.
3. Completely responsible and a Lead Engineer for a Petrochemical Project which includes Design/Engineering of Safe guarding systems, Process Distributed Control Systems, Field Instruments for Pressure, Flow, Level, Temperature, Analytical applications. Scope of work includes Design / Engineering complex control systems for Vendor packages such as Compressors, Furnace, Flare, Various Pumps, Hydraulic systems, CCTV, etc and Fire Gas Detection Systems. Very good knowledge obtained in all kinds of Instrumentation & Control systems.

4. Project executed: Client - Nanyang Polytechnic, Ministry of Education, Singapore, Scheme: Chemical Process Technology Centre, Jurong Island, Singapore.

B] Senior Project Engineer (Engineering Coordinator ), Plant Engineering
& Construction Pte Ltd, Singapore:

1. Responsibities included setting up the E&I Engineering Division in the existing Engineering Department with Mechanical, Piping, Structural Engineering capabilities and to execute projects.
2. The Employer is a reputed group serving many Multinational Clients such as Shell, Exxon-Mobil, British Petroleum, etc in the Refinery & Petrochemical industries on EPC basis.
3. Project executed: Client - China National Petroleum Corporation, China. Scheme: Metering Skids Projects

C] Senior Project Engineer, Salcon Group of Companies,Singapore

1. Have been working in the capacity of Assistant Manager (Projects) doing complete M&E Design/Engineering & Coordination.
2. The Employer was the topmost Enterprise 50 Company for 2 years continuously, an accolade created and awarded for Singapore's best Private Ltd companies by the EDB. Also has regional presence and have carved a niche in Water treatment areas.
3. Completely responsible for Detailed Design, Engineering, Procurement, Installation, Testing & Commissioning of Electrical, Instrumentation & Control Systems such as High Voltage Switchboards, Low Voltage Switchboards, Motor Control Centres, Variable Speed Drives, Power Transformers, Lighting Systems, Emergency Diesel Generator Systems, Supervisory Control and Data Acquisition (SCADA ) Systems ( which includes PLC based Local Control Panels, Hardened MMIs, Servers & Operation Stations, Field Mounted Instruments/ Valves & others ), Building Automation Systems (which includes complete Fire Protection System & ACMV System), CCTV System, Telephone & Intercom System, Different types of Field Instruments like Pressure, Flow, Temperature, Level Instruments, Actuators, etc. and associated items like PVC/FR/Fibre Optic Power/Control/Signal Cables, Trays, Glands, etc.,
4. Responsibilities included Scrutinizing / Placing /Managing Contracts and Orders with a vast range of Supplier/Contractors. Assist in Bidding of new projects, Develop Complete Project Schedule using Planning packages and track, monitor project progress. Develop Method statements for all Electrical & Instrumentation works, Training of Client for the whole project, EOT claims saving revenue for the Employer. Assist in Bidding for new projects
5. Project executed: Client - PUB, Water Department, Singapore, Scheme: Sludge Treatment works at Chestnut Avenue & Choa Chu Kang Waterworks

D] Senior Project Executive, Larsen & Toubro Limited, India

1. Joined the Company as an Engineer and promoted earlier to Senior Engineer and Senior Project Executive levels.
2. The Employer is considered the best Public Limited Company and an Indian Multinational Organisation for its reputation, Quality of work, commitment and strict adherence to dates of completion of projects and are into many areas of works spread through-out the length and breadth, nook and corner of India. Have innumerable awards to its credit and other companies try to emulate this Employer's style of work.
3. Execute Electrical & Instrumentation portion of fast track Turnkey Oil & Gas Projects. Schedule Erection & Commissioning activities for Electrical & Instrumentation areas including Calibration. Gained Hands-on experience in typical Offshore systems like Well/Fire Shutdown Panels, Kill/Acid Panels, Cathodic Protection Systems, Gas Detection Systems, Normal/Emergency Lighting, Pressure Safety Valves, Shutdown Valves, Solar Electric Power System, Navigational Aids System, Low Voltage Switchboards, Motor Control Centers, Turbine Generators, Diesel Generators, Fire Water pumps, Lighting Fixtures, Junction Boxes, Area Classification etc,.. Do Erection & Commissioning of Electrical & Instrumentation activities in the Capacity of Site-In-Charge within the Project Contractual dates. Have successfully completed 4 ( 2 - Completed in time, 2 - Ahead of Scheduled Completion date) such Offshore Well/Production/Process Platform Projects which also involved Erection, Testing and Commissioning activities Offshore.
4. Responsibilities included Approving, monitoring & expediting progress in preparation of Engineering Layout Drawings & documents such as Instrument Hook-ups, Single Line Diagram, Loop schematics, Cable/Tube Schedules, Bill of Materials, Instrument Data Sheets prepared by the Engineering Consultant of the Project, Scrutinising /Placing /Managing Contracts and Orders with a vast range of Supplier/Contractors. Assist in Bidding for new projects.
5. Projects executed: Clients - Oil & Natural Gas Corporation (ONGC), India & Enron Oil & Gas Corporation, Schemes: I-MNTW Well Platforms, S1-Sand Well Platforms, Tapti Process/Production Platform

E] Instrument Foreman [Engineer Grade], Hindustan Organic Chemicals Limited (
A Government of India Enterprise ),India:

1. Responsible for Electronic Laboratory's activities i.e. servicing & troubleshooting of all Electronic Equipment in the Company such as Gas & Liquid Chromotographs, Spectrophotometers, Polarographs, Single Loop Controllers, Indicators etc,. Maintain Instrumentation Shifts of Formaldehyde, Nitrotoulene, Nitrobenzene, Pollution Control plants controlled by Distributed Control System. To upgrade, modernise plants from Pneumatic to Electronic systems. Very good experience gained in Control valves, Controllers, Primary sensing elements, etc,.

F] Control System Engineer, Uptron India Limited ( An Uttarpradesh State
Government Enterprise ), India

1. Responsible for Design / Engineer Turnkey Automation projects for Power & Mining Industries through Distributed Control Systems, Single Loop Controllers & other related Electronic Instruments. Responsibilities included were to Design, Procure, Inspect, Install, Erect & Commission Electrical & Instrumentation systems within the stipulated Project Schedule. Working knowledge gained in Distributed Control Systems.

G] Assistant Engineer, J.K.Synthetics Limited,India:

1. Responsible for Maintaining Instrumentation shifts independently of a Partially Oriented Yarn plant with a capacity of 90 Tons per shift, Do Preventive, Shutdown & day to day maintenance, Attend to Breakdowns, Malfunctioning, Troubleshooting of Electrical & Instrumentation systems such as Uninterrupted Power Supplies ( 400 Kva ),AC Drives ( 15 Kva to 240 Kva ), DC Drives, Single Loop Controllers, Indicators & Recorders. Working knowledge acquired in developing software for Inter-departmental use in dBase, Foxbase, 8085 Microprocessor Machine Language, Clipper & to attend Hardware failures of Personal computers & accessories.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 1651 to 1700 of 6635)Go to Search Parameters...
Brief Description
Experienced Oil and Gas professional with over 12 years engineering, applications, marketing experience. Self starter with experience in Electric Submersible Pumps (ESP), Variable Speed Drives (VSD/VSC), downhole instrumentation, permanent monitoring and fiber optic monitoring systems.
I am a process control engineer with over 15 years of experience of design, implementation and commissioning of process controllers for the refining and petrochemical process units. I am available to work on contract basis immediately.
I'm Egyptian Geophysicist with more than 15 years experiences in seismic data processing ( 2D & 3D). I gain experiences in well logs processing and producing synthetic seismogram. My full detailed experiences are in my CV......Regards....
A total of eighteen (18) years, Electrical, Mechanical, Piping, Instrument drafting experience in a wide variety of industrial sectors
INSTRUMENTATION TECHNOLOGIST NAIT graduate June 30, 2004. Previous experience as Plant/Process Operator in coal mine. Seeking entry-level position in the industrial field that allows use of my acquired technical training and includes exposure to a wide variety of occupational related tasks
Mechanical Engineer with Masters and experience in oil and gas. Competent in thermal systems and two-phase flow analyses. Maintenance Engineering experience with rotating and fixed equipment.
SUMMARY OF EXPERIENCE •15 years Post Degree Experience in reputed multinational Oil & Gas, chemical process industries with emphasize to project execution, plant maintenance, and workshop management and inventory control on spare and consumables.
BSC in Mech. Eng., post grad. in Petroleum Eng., reservoir engineering exp.( developing and management, black oil, gas and composition reservoir simulation, tech. and econ. eval. Studies, IOR and EOR methods-8 yrs.) and IT consulting, services and project management (12 yrs.)
Mechanical engineer specialised in naval welding with 15 years experience seeking a full time job.
Junior well engineer, Design engineer
Qualification: MSc Corrosion Control Engineering Experience
7 years piping design engineer using the latest softwares
Instrument Engineer
Bachelor's in Commerce plus Mechanical Diploma
Production engineering, production supervision of field with 50 production well+ 2 injectors. Optimization of operations, supervision of workover , reentry operations for old wells. Experience is only within Kazakhstan.
EXPERIENCED IN PIPING DESIGNER AND PLANT ENGINEERING, KNOWLEDGEABLE IN PIPING DETAILED LAYOUT, PIPING PLANS (G.A), PIPING ISOMETRICS, LINE LIST, SPECIAL ITEMS LIST, MTO’S AND SPECIAL PIPE SUPPORTS WITH RESPECT TO PLOT PLANS, LINE LIST, PFD’S, P&ID’S AND OTHER RELATED INFORMATION DRAWINGS.
Telecom engineer/technician SDH,CCTV,PABX
Petroleum Engineer with 7 years experience in the oilfield.
I have over 15 years of experience in this field and acquired enough knowledge. I had handled very challenging assignments. As an Instrument foreman I was fully involved in my business wherein I had to identify potential opportunities and gain wide knowledge.
US Citizen, Petroleum E&P Support Advisor/Team Lead /Managing Consultant with superior Vendor-Certified Petro-Computing skills and extensive experience in Multi-Vendor/Multi-Applications User Support, Training and Mentoring for Exploration, Appraisal & Production
I have ten years experience in SITEP (ENI partner) and my qualification is Maintenance supervisor
5 Years Experience in Piping and PDS
Six years of solid experience in Process Control and Automation Engineering. Hands on expertise with Rockwell Automation, Emerson DeltaV Control Systems and AMS Device Manager. Has excellent communication, creative problem solving and effective project management skills.
Mechanical Engineer - Heat Transfer/Static Equipment
Analyzer Engineer
I am chemical engineer seeking position is Production, process and design. I am harworking and good learner of new technology. I have excellent interpersonel skills and organisational skills.
I am a mechanical engineer with experience in the Power Generation industry. I have worked for Siemens/Westinghouse as a field engineer, managing gas turbine upgrades and repairs. Also I have worked for Air Products supervising hydrogen plant construction and operations. My background also includes
A result oriented professional with proven abilities in plant Electrical & control system. Preventive & Breakdown Maintenance in the field of Oil & Gas and Petrochemical Industry. Installation, Maintenance & Trouble shooting of Electric drives, HT & LT Switchgears & Protection Relays, Control Panels
Master of Engineering ¡V Petroleum Systems, University of Regina, Canada
IIW-qualified welding engineer with eight years of progressively responsible inspection and engineering positions. Comprehensive knowledge of fabrication standards and codes , welding , Post-weld heat treatment (PWHT) , mechanical and Nondestructive testing (NDT), pickling/passivation and painting
Drilling Technician
Land surveyor in oil&gasoil field qualifications diploma in civil engg.
Construction Planning engineer, degree in Electrical Engineering, Computer Literate using primavera P3 & MS Project software. Instrumentation knowledge
Project Manager Mechanical Engineer Construction Management Quality Assurance Repair Maintenance Contract Management
A seasoned subsea systems engineer with a detailed understanding of trees, controls and manifolds from front end feasibility and conceptualisation to offshore installation and commissioning.
Project Management and Engineering Experience in Oil-Gas-Refining, commercial and other industrial sectors.
qualified in six modules of different aspects of corrosion,and the confidence gained throughout the years while running my own consultancy
MWD Engineer
Control system designer / instrumentation
Civil / Structural Designer, PDMS, AutoCAD,
Quantitative Interpretation for Reservoir Characterization
13 Years Hands on Experience in Inspection (Plant Inspection) & Quality Control in Fabrication, Installation and Testing of Process & Utility Piping Work, Sub Sea Pipeline Work, Pressure Vessel and Offshore Steel Structures like Jacket, Deck, Bridge etc. in the field of Oil & Gas Development.
•Over 20 years of experience. •DCS- Delta-V , Foxboro I/A system and YOKOGAWA . •PLCs- Gould Modicon, Askawa, August Systems, HIMA etc. •Foundation Field Bus •Analytical systems Design and Engineering - Physical Property Analyzers, NIR •Field Inst. Engineering. •System commissioning.
Company representative on sales negotiations and jobs. Coil Tubing Operator on OTIS coil tubing unit. Heavy equipment maintenance, boilers, pumps, compressors, and turbines.
Diploma in Mechanical Engineering, Diploma in Industrial Safety from Central Labour Institute- Mumbai, H2S Awareness & Rescue Operation, Safe Journey Management, Road Safety Management, Job Hazard Analysis, Permit to Work System, Gas Testing, Incident investigation & Accident reporting.
I have worked for multinational and International companies in the Middle East like General Dynamics, Babcock & Wilcox, and Delta Corporation. I look for a job as QA/QC Engineer/Specialist or Plant Manager.
I have 15+ years experience as an Instrumentation & Control Systems Design Engineer along with seven years I&C construction and commissioning experience at locations throughout the globe.
I have varied experience earned through honest means in Chemical, Oil & Gas, Petrochemical , Water treatment and other related areas by hard work, sincerity, dedication, team spirit and conviction.
A Mechanical Engineering PhD graduate seeking engineering and research work as a Mechanical Engineer.
•Ability to solve petroleum production problems involving design of petroleum production facilities •Engineering and project management experience in the oil industry •Strong planning, communication and presentation software skills
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   [ 34 ]   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com