Resume - A highly experienced Pre-Commissioning, Commissioning, Start-Up and Field Engi...

Misco Jobs

Resume #29679

CONTACT INFORMATION:
View contact information...

EDUCATION:
1968 Degree – Marine Engineer, (Ship Engineer)
1967 Federal Diploma: Marine Engineer, (Ship Engineer) - Theoretical
1966 Training College for Marine Engineer, (Ship Engineer)
College Diploma

1962 Diploma of Electrical Instrument Maker

STRENGTHS:
A highly experienced Pre-Commissioning, Commissioning, Start-Up and Field Engineer, Coordinator, Supervisor, Shut-Down planner, having worked on many varied projects, who is hard working, industrious and motivated by achievement and can be relied on to "get the job done".
- Extensive experience in project pre-commissioning, commissioning and start-up of major projects.
- Extensive experience HSE audits and inspections, Safety meetings with Subordinates and Contractors.
- Start-up co-ordination during plant modification, turnarounds and shutdowns
- Extensive experience as Shut-Down planner.
- Skilled production and process trouble shooter, capable of conceiving realistic and practical solutions maximising cost effectiveness
- Extensive management and supervisory skills experience with good man-management skills including employee training, safety training and management.
- Competent in document and procedure writing skills with extensive technical contact interviewing, section and recruitment skills.
Employment Summary:
- 35 years pre-commissioning, commissioning, start-up, operating in oil and gas petrochemical and metallurgical plants.
- 21 years project commissioning, start-up and operating in oil and gas and petrochemical plants.
- 14 years project commissioning, start-up and operating in metallurgical plants

EXPERIENCE SUMMARY:
- Gas treatment plants, Atmos crude oil distillation, vacuum distillation, platformers, naphtha & distillate hydrotreaters, tankfarm operation & blending, naphtha cracking, gasscubbers, degasifiers-CO2 removal plants, visbreakers, sulphur/amine plants, merox plants, naphtha rerun units, H P reaction vessels.
- Pressure testing, line blowing, line flushing, steamblowing, pitting testing, punchlisting of process lines.
- Steam generators, Water tube boilers, flame tube boilers, demin water plants.
- Waste heat boilers.
- Waste water treatment plants = Tanks, Horizontal/inclined screw conveyers (Classifiers), Sludge/mudpumps, cyclones, mixers dosing pumps.
- Boilerfeed water treatment plants.
- Closed Cooling system = Overhead air fin cooler with variable speed fans and fixed speed overhead air fin cooler with louvre airflow control.
- Steam turbines, gas turbines, gas compressors, air compressors, air dryers, positive displacement pumps, centrifugal pumps, submergible pumps, diesel pumps and generators, multistage pumps, screw conveyers, skimmers, airrators.
- Cryogenic storage, propethane reactors, catalyst preparations, catalyst blending
- Furnaces, incinerators, ground flares, including dry out and bake out.
- Flocculant blending, hydraulic systems, positive slurry displacement pumps.
- Utilities/offsite: Instrument air compressors and dryers, waste water treatment,
H2 – N2- O2 systems, Firewater systems, Potable water, Sandfilters, Safety shower systems, Steamline blowing (pitting test)

EMPLOYMENT HISTORY:
March 2005 - July 2005 TOTAL OIL Refinery
Antwerp BELGIUM
Commissioning-Co-Ordinator/Engineer Supervisor and Shut-Down planner.

April 1988 - July 2003 W A Refinery
Collie WA
Commissioning-Co-Ordinator/Operations Supervisor and Shut-Down planner.

May 1980 - March 1988 Total Oil Refinery
Sydney, Australia
Off-Side & Production Supervisor

May 1979 - May 1980 ICI Australia
Sydney, Australia
Commissioning Co-Ordinator/Control Room Operator

July 1973 - April 1979 Total Oil Refinery
Flushing, (Vlissingen) The Netherlands
Commissioning Engineer/ Production Supervisor

August 1969 - March 1973 Gulf Oil Refinery
Rotterdam, The Netherlands
Senior Process Technician

January 1967 - July 1969 V.N.G. Shipping Lines
Rotterdam, The Netherlands
Assistant Engineer and 5th Engineer

ADDITIONAL QUALIFICATIONS:

Issued By: Qualificate Achieved:
- St John Ambulance First Aid Certificate
- Rotterdam Fire Brigade Fire Fighting and B.A. Certificate
- Department of Labour and Industry - New South Wales Power Hoist Drive
- W A - Computer Centre Document Development
- W A- Computer Centre MS Windows NT
- W A- Computer Centre SAP Management including:
- Payroll Functions
- Risk Event Reporting
- Shut Down Planning
- Material Management
- Contract Management
- Business Event Menu Usage
- PM Material and Service
- Honeywell Honeywell TDC 2000,3000, 4500
- I.T.C. Work Place Assessor
- Management Technology Education - Perth Management Skills for Supervisors and Managers
- W A- HR Equal Opportunity, Bullying, Harassment and Discrimination in the Workplace
- Development-Dimension International Working Through Conflict
- Development-Dimension International Communicating with Others
- W A - Training Centre Atmosphere Testing – Gas Testing
- 3CM Pty Ltd People Development Workplace Trainer and Workplace Assessor

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 651 to 700 of 6635)

Go to Search Parameters...

Brief Description

Ph.D in Safety Engineering, looking simililar job either consultant, or mining, mechanical engineer or any safety related job

See resume body

Free! Planning / Scheduling, Project engineering, Subcontracts administration, Primavera, Open Plan,MS Office,Pipeline design/construction/replacement

Objective: I would like to pursue a challenging position in the oil and gas industry working as a development geologist developing oil and gas fields along the Texas Gulf Coast.

Maint Planning, Materials management, warehouse, plant maint, turnaround, project

Ph.D in Geophysics, over 12 years industry experience in offshore and onshore seismic 2D/3D data analysis, processing and interpretation

Reservoir/Geoscience Technician

Completion/Workover Supervisor

I am a mechanical engineer possessing over 15 years of rich experience with the Oil and Gas sector and Petroleum Industry. The basic areas of my expertise are Planning & Development, Project Management & Execution, Design and Detail Engineering.

Having qualification CSWIP 3.2 & Bgas grade2 from TWI - U.K

Petrophysicist, 11 years experience. Strong well log interpretation in vertical and horizontal wells. Thorough knowledge of Wireline / LWD tools. Experience in Clastic and Carbonate reservoirs. Expertise in core-to-log reconciliation and neural networks. Co-author on two books on well-logging data a

Degree in Instrumentation, National University Indonesia, graduated 1993. 14 years Experiences in Oil & Gas Business as an Instrument engineer.

Inspection head in ExxonMobil Campana Refinery Argentina. 26 Years of experience in fixed Equipment Inspection. In charge of all Fixed Equipment Inspection and QA/QC including Contractor Management, new hired Inspector training, Technology improvement and cost control. Expertise in Coke Drum Inspect

Instrumentation ICSS commissioning specialist

SPECIALIST IN PRECOMMISSIONING, COMMISSIONING AND START-UP

CONTROLS AND SOFTWARE SPECIALIST

My experience includes expert-level competencies in Mechanical Design Engineering, in Piping Materials Specification, in Pipe Stress Analysis and in Piping Items & Mechanical Package Procurement for Refineries, Off-shore Oil & Gas Platforms, Petrochemical Complexes, Chemical & Pharmaceutical Plants,

INSTRUMENT ENGINEER

Senior Reservoir Engineer with 20 years experience in Reservoir Simulation and reservoir management. Very good experience in Well Test Analysis, reserve estimates, material balance and enhanced oil recovery schemes.

I am a Civil Engineer w/ 28 yrs experience in oil & gas, infrastructure and gen. const

I have been working for the past 22 years in project controls / planning, construction and maintenance disciplines in Oil & Gas, LNG, Fertilisers, Petrochemicals, Power and Refinery. I have a good knowledge of International Standards & working practices. Thorough knowledge of Primavera (P3).

Good communication,Self motivated,Analytical and Team player. B. Engr. Elect/electronic

Telecom Engineer transmission speciality more than 16 years experience

18 years experience: design of suppression and alarm systems, manage design, review P&ID for HPR chemical plants, CFD modeling, nuclear industry FHA, performanced-based: (fire exposure, fire endurance, smoke control) designs, firefighting experience 5 years

Position Objective: Senior Managerial position in electrical or electro-mechanical industrial firm. The aim is to bring the facility’s productivity, profitability and quality up to a highly recognized standards utilizing personnel, technology & procedures.

I am an Indian national presently seconded to Brunei Shell Petroleum, having more than 13 years of Experience in the field of Oil, GAS (Onshore and OFF shore), petrochemical plant and project experience in the field of Reliability, Inspection, Construction & QA/QC, Pipeline, Piping.

I am working from 1999 to peresent as drilling supervisor in oil and gas fields in offshore in gulf and onshore in south of iran in exploration &new well&workover wells. I have IWCF certificate.

Experience well test engineer

OIL & GAS COMMISSIONING FOR PROCESS PLATFORM / DRILL SHIPS LIKE : MOSVOLD-1/2

With Thirteen years experience for working on different types and application on line gas and liquid analyzers and gas Chromatographs all over India, Saudi Arab, Qatar in most of the industries like Refineries, Offshore sites, Fertilizers, Steel plant, Petrochemical plants etc.

Construction management, supervision and engineering of mechanical and welding works e.g. oil and gas pipelines, pig-, pump/ compressor and metering stations, industrial plants, structural steel, filling stations, town gas and water distribution systems, working on oil- and gas life lines e.g. maint

17 Year expereice in Insrumentation , GE Harris, Realflex & Invensys SCADA Systems, ABB & Invensys DCS systems.

Mechanical engineer in Repair and maintenance of Rotating equipment such as Pumps, Compressors(Reciprocating and Screw types), Gas Turbines(Solar Centaur), Air Fans and Blowers

Consulting Drilling ,workover, ,Directional Drilling ,Mud engineer

DIPLOMA IN ELECTRONS&COMMUNICATION ENGINEER

PABX SERVICE ENGINEER

Production Engineer with 12 years of industry experience

BSc in env. MSc in safety eng.

Over 25 years of teaching practical and theoretical in the field of mechanical maintenance in the Philippines and Middle East

Twenty(20) years of experience in detail engineering/FEED/PMC of petrochemical complex/refinery/major industrial projects. 11 years wotking in middle east countrirs. Familiar with international codes and standards.

A highly experienced Pre-Commissioning, Commissioning, Start-Up and Field Engineer, Coordinator, Supervisor, Shut-Down planner, having worked on many varied projects Having a Degree – Marine Engineer, (Ship Engineer)

Proven ability to provide Industry initiative and leadership. 20 years of experience. Extensive SCADA, PLC, DCS and HMI Project Management Consulting knowledge.

GRADUATE DIPLOMA HOLDER (3 year fulltime study) in MECHANICAL ENGINEERING, having Certifications as SENIOR WELDING INSPECTOR (CSWIP 3.2) -TWI LONDON, NACE (USA) COATING INSPECTOR LEVEL 1 – CERTIFIED, NQA (UK London) Certificate of Training in ISO 9001-2000 QMS Auditor, ASNT LEVEL II-RT,UT,MT,PT

Petrophysicist, Log analyst

He is the Manager of Technology Development in Exploration & Production in the Corporate Direction of Strategic Planning of PEMEX. Previously, he was Well Productivity Manager in the Technology and Professional Development Vice-presidency of PEMEX Exploration & Production. Also, he has been the head

QA/QC engineer/inspector in piping/pipeline and facilities construction in oil/gas. And an HND in welding/fabrication .

DCS Lead Engineer

Experienced Geophysicist

10 years in Geophysicist

First 1 2 3 4 5 6 7 8 9 10 11 12 13 [ 14 ] 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out