Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #29686 next resume »»
CONTACT INFORMATION:
View contact information...

EDUCATION ATTAINMENT:
March 1977: Graduated
High Vocational in Electrical Power
Institute of Technology and Vocational Education (Tak Campus)

March 1975: Graduated
Vocational in Electrical Power
Nakornpathom Technical College

TRAINING:
A. Graduated 1980: Maintenance Air Condition
Telephone Organization Training Center of Thailand

B. Graduated 1988: Management
Kasetsart University, Thailand

CAREER RESUME AND EMPLOYMENT HIGH LIGHTS:

A. Company: TECO-BARCLAY MOWLEM JOINT VENTURE
Inclusive Date: August 19, 2004 – Present
Designation: Building Service Engineer

Project: Taiwan High Speed Rail Project (Taiwan)
Job Description: Supervise to inspection Test & Commissioning E&M equipments as such
Transformer, Generator, UPS/CBS, HV Switch gear, LV Switch gear,

LMCP, MCCB, Air condition system, Fire Pump, FA/PA system, Elevator, lighting, Sewage treatment system, interface system. etc.

B. Company: CB & I (Thailand)
Inclusive Date: February 2, 2004 – July 31, 2004
Designation: E&I Supervisor
Project: Trans Thailand Malaysia (TTM) Gas Pipe Line system

Job Description: Supervise to installation cable tray, conduct, junction box, control panels,
Instrumentation, hook up, air tube, cable pulling, cable wiring and
Termination, gas protection system, loops test and field calibration, etc.

C. Company: Danieli Hellas s.a.
Inclusive Date: November 12, 2002 – November 15, 2003
Designation: Electrical Supervisor
Project: Halyvourgiki (Greece)

Job Description: Conducted to installed cable tray & conduits, switch boards, PLC panels,
Control box, cable pulling, cable termination and pre test electrical Equipment, etc.

D. Self Employee: Sub contractor
Inclusive Date: July 5, 2001 – July 5, 2002
Designation: Manager
Project: Gas seal system (PTT – Off shore), General

Job Description: Conducted to installed lighting, switch, receptacle, cable tray, conduit, cable
Pulling, cable wiring and termination, checking the actual construction,
Wiring test, signal test, field inspection quality control, etc.
Maintenance Electrical & Instrument system

E. Company: S.E.I. Strumentazion Electrotecnica Industriale S.p.A.
Inclusive Date: September 12, 2000 – April 30, 2001
Designation: Electrician Foreman
Project: Shurtan Gas & Chemical Complex (Uzbekistan)

Job Description: In charge of field instrumentation loops test, loops checking and field
Calibration and pre commissioning as such Pressure transmitter, level
Transmitter, flow transmitter, control valve, thermocouple, resistance
Temperature detector (RTD), limits switch, and gas detector, etc.

- Measurement and simulate checking signal out put of instrumentation
- Checking instrument air piping by leak test
- Checking impulse lines by hydraulic test
- Checking interface & interlock system
- Wiring test in the field and Marshalling Cabinet
- Full operation PLC (HIMA ELOP II)
- Prepare As-built drawing and document all loop diagram, P&I diagram and interconnection in Marshalling Cabinet

F. Company: Siam Bio Industry co,. ltd.
Inclusive Date: January 5, 200 – September 5, 2000
Designation: E&I Supervisor
Project: Food Plant (Angthong)

Job Description: Supervise the daily activities of the maintenance personal
- conducted preventive check-up all machines and accessories for running condition
- Conducted physical inventory of equipment and power tools of company

G. Company: Tosplant Engineering (Thailand) co,.ltd. (TOSHIBA GROUP)
Inclusive Date: March 1, 1996 – December 31, 1999
Designation: Electrical Supervisor

Projects: Thai Sankyo, Thai Sanko Tochemi, Thai Sanshin, Toshiba Production Plant
(Thailand), Siam Strip Mill, Toshiba Device Display (Thailand), Toshiba
Semiconductor (Thailand)

Job Description: In charge and supervises as team to all E&I Foreman, charge hand for quality and conformity with specification at the filed installation and materials used
- Supervise in the actual construction and control schedule progress
- High Voltage construction;
- Control installed Substation 115 KV, 230 KV, GIS system, assembly electrical equipments, gas tube, gas insulation switch, main breaker, transformer, switch gear, harmonic filter, SVC system, control panel, protection panel, PLC panel, cable pulling, cable termination, cable wiring

- Testing HV Switch gear, Main CB, relay, transformer, control function, protection function
- Low Voltage construction;
- Control installation works as such cable tray, conduit, cable pulling, and cables wiring, cable termination, control panel, auto transfer switch board,
PLC panel, vender package, lighting, motor, transformer, generator, electrical equipments, etc.
- Testing function control system and protection system
- Instrumentation;
- Control installation works as such local panel, multi core cable, fiber optic cable, tubing, and piping, console cabinet, flow instrument, level instrument, pressure instrument, temperature instrument, control valve and orifice plate
- Loops checking and wiring test
- Measurement and simulation signal
- Preparation as built drawing and finally document

H. Company: Mee Dee Tech co,. ltd.
Inclusive Date: August 1, 1985 - December 1, 1995
Designation: Electrical Supervisor
Project: Fertilizer plant (Kanjanaburi)

Job Description: In charge and supervise industrial maintenance electrical & instrumentation

System
- Weekly preventive maintenance and repair of all Motors and its control, also electronic accessories of the company premise
- Maintenance service of concerning electrical trouble of all departments
- Mechanical repair and electrical control
- Keep completes maintenance records and report the maintenance head any sign of danger the equipment may encounter
- Coordinate with other personal in shift by giving properly information in receiving and turn over of responsibilities, guide trainees in there assignments

I. Company: Telephone Organization of Thailand
Inclusive Date: February 1, 1978 – July 1, 1985
Designation: Engineer
Project: Switching Building
Job Description: In charge in the preparation of layout plans
- In charge of the control of materials quality and workmanship of on going electrical works
- Supervise in the actual construction of the projects including materials estimate and schedule
- Installation high voltage and low voltage equipments
- Installation power cables and telephone cables
- Installation Air condition system
- Installation lighting system
- Installation Fire alarm system
- Installation Public Address system
- Preparation As-built drawing and finally documents

I here by certify that the above information are true and correct to the best of my knowledge and belief.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 1751 to 1800 of 7051)Go to Search Parameters...
Brief Description
Design Engineer ( Static Equipment )
HND , ELECTRICAL/ ELECTRONICS ENGINEERING (Power and Machine Option)
I finish my contract in South Africa as Safety Advisor on “Polaris” Barge (Acergy) for his dry dock. I obtained my master's degree (Engineering and Chemical safety) in 2003. My career really started In 2005 in the off-shore, on the drillship “Pride Angola” where I sailed for 3 years.
I am an instrumentation and automation engineer with over 5 years experience in oil&gas, refinery and petrochemical fields, covering detail design and site installation/ precommissioning/ commissioning activities.
B-Tech in mech with 7.5 years of experience in plant design arena
Eletrical enginer for 8 yrs experince as chief enginer
Civil Structural Engineer
I have near eight years experience in field of piping design of refinery, oil and gas with position as piping lead engineer & assistant manager, furthermore I am fluent PDS, PDMS, Smart Plant Review, Plant Design Review, AutoCad, Microstation, Microsoft office, etc.
weldin inspection
Having a Diploma in Mech. Engg. with 18 years of Experience in Designer
Energetic and productive professional with broad-based experience in Maintenance Planning, Shutdown Planning and Project Management in Line with the Computerized Maintenance Management System.
I have total Twenty-one years hand on working experience in Electrical maint. and operation fields in various organization.
Control Electrical HV &LV equipment and Instrumentation Installation & Test, Cable wiring
Seeking a challenging career as a Reservoir/Petroleum/Production Engineer in an E&P Company
15 years of progressive experience and responsibility with documented success in the areas of drilling, workover, completions, engineering, operations and supervision at various organizational levels. I’m seeking a challenging position as a Drilling &/or Work-over Engineer / Superintendent.
18 years experience in process design of refinery and petrochemical units.
Over 14 Years in Maintenance planning, Shutdown/Turnaround Planning in petrochemical Industries. And also in Maintenance of various Rotating and Static Equipment ;Construction Planning including costing.
A consulting petroleum engineer / project management position in a challenging environment which requires significant technical expertise. Available for immediate travel, domestic or worldwide.
I am a Chemical Engineer having more than 18 years experience in various Oil Processing / Gas Treatment / Petrochemical Process Plants . I have 6 years of Onshore / Offshore Oil / Gas Plants Operational Experience as a Production Supervisor.
Job Title : Software Enginer Education : Ordinary Degree in Bachelor of Science Previous Employer: Motorola Australia Software Centre
Expert in understanding permeability of the carbonate reservoirs. With this help reservoir engineers can do their well level simulation rather easily. Fees are charged for every foot of well data studied. Work will be done at the place of the expert.
More than fourteen years hands-on and supervisory experience in Petroleum Refineries in Qatar, Saudi Arabia and Pakistan. Have been analyzing samples from all streams of different units. Have been acting as Lab. Group Leader during Group Leader's leave/absence.
A well rounded drilling personnel with a unique experience in drilling and completion / work over operations
Over twenty years in plants, and pipeline construction, Inspection and supervision, including several overseas assignments.
Quantity Surveyor/Estimator (Mechanical)
All descriptions of skillsand experiences are listed in resume. I am available to begin work immediately.
Instrumentation Engineer with 15 years of experience in maintenance, teaching and construction
Primavera , MS Project
A self-motivated mechanic with over twenty years worldwide experience, in mechanical/ maintenance engineering’s high-pressure environments; from marine engines, top drive, rotary tables, auxiliaries, hydraulics, and rig upgrades. I am hard working, resourceful and reliable.
Working as Geosteering engineer, meeting with client, collect data, model preparation, landing section, lateral section, steering while drilling, report. Communication to all participant while drilling execution.
i am graduate mechanical engineer having 7 years expereince in piping/structure fabrication and erection in the kingdom of bahrain.we were making the items like tanks , pressure vessels,pot shell,pipe stack , pipe racks for oil and gas sector, petrochemicals and off shore products.
I have extensive experience on Electrical Engineering studies , construction , Transmission & Distribution and Oil & Gas during my assignment on Total E&P Yemen and Petomar in Angola. Designing, modifying, and implementing electrical system my daily challenging job.
ASNT L III UT AND WELDING INSPECTOR AWS CWI QC1.
I am a Structural Designer with over 7 years experience in design of offshore and onshore oil facililities, building and other civil infrastructures
Seven (7) years experience in designing fire protection systems for petrochemical plants and similar industries. I am familiar with NFPA and other internationally accepted standards.
7 years experience in Mechanical maintenance
- Good at English and drilling software.
16 years of Piping & Pipelines Project Management/Project Execution experience in the Industries like Refineries, Hydrocarbon, Petrochemical and Oil&Gas(Cross Country Pipelines, Booster Pump stations, Oil Station, Gas Station, Up-Stream flow Lines).
GRADUATE MECHANICAL ENGINNER,CSWIP 3.1 WELDING INSPECTOR CERTIFIED BY TWI,UK,ASNT LEVEL II IN RT,UT,PT,MPT,IRCA UK APPROVED ISO 9001:2000 QMS LEAD AUDITOR COURSE PASSED. MORE THAN 8 YEARS EXPERIENCE IN QA/QC,WELDING INSPECTION IN EPC OIL&GAS
Making electrical design by using program ETAP such as Load Flow Study, Short Circuit, Motor Starting, Relay Coordination, Transient, and also calculation manually as a proof of the software.
Iam a Graduate Mechanical Engineer with MBA in Poduction Management and a PG. diploma in Materials Management with around 8 + Years of Experience in various MNC's (Oil & Gas, Process/Chemical, Metallurgical, Pharmaceutical.etc.).
An enthusiastic and self motivated Production and Process Engineer, with experience on production optimization and surface equipment designing and evaluation, focused on maximizing asset production capacity and productivity in the oil and gas industry.
HSE Manager, Experience in HSE studies of seismic exploration 2D and 3D since 2004 to the date
Oil and gas mechanical technician
I have diploma with 20 years experience in construction/maintenance. 10 years in oil industries maintenance, also witness commissioning and start up of new installations in the refinery. Hands on experience in 33/11/3.3kv/440v systems.Available in one month time notice period.
Specializing in ICT/SCADA planning Proven Technical & Management Expertise with 14 years Experience overseas-Kuwait and Japan.
See resume
Resume for Project engineer position
Expert INSTRUMENTATION , SCADA, TELECOM , DCS OR SAP / ERP , DESIGN , ENGINEERING , PROJECT MANAGEMENT , OPERATION AND MAINTENANCE , TECHNICAL SERVICES , ISO’S ETC
Industrial engineer, ample experience in catalytic cracking technology and liquefied natural gas, seeks position to apply knowledge acquired as researcher over past four years. Having lived in Latin America and Western Europe, have developed effective multi-cultural skills.
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   [ 36 ]   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com