Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #29822 next resume »»
CONTACT INFORMATION:
View contact information...

SUMMARY OF EXPERIENCE:
20 years experience in Detail Engineering. Have held position of Engineering Coordinator and Lead Civil/Structural Engineer for past 12 years. Total 11 years working experience in middle east countries.

RESPONSIBILITIES AND NATURE OF EXPERIENCE IN GENERAL
* Experience in detailed engineering of petrochemical, refinery, power, chemical, cross-country pipelines, steel mill and other heavy industrial projects.
* Supervise and provide technical guidance to a team of engineers and designers to complete the project in schedule time and resources.
* Analysis and design of steel and concrete structures using Staad-pro and other in-house software packages, prepare grading and paving layout, storm water drainage and all civil/ structural jobs associated with grassroot projects.
* Coordinate with other disciplines for design inputs.
* Estimation of manpower requirements, prepare manpower schedule, manpower loading and monitoring.
* Preparation of specifications.
* Thorough knowledge of inter-discipline coordination, project procedures, sequence of works, engineering deliverables for projects.
* Coordination of Process Licensor and Clients and negotiation and finalization of sub contractors.
* Experience in handling multiple projects.
* Preparation of ITB (Contract) documents.
* Two years site experience.
* Well experience in Quality and change management

COMPUTER LITERACY:
* General idea – Primavera, Microsoft Project
* Staad Pr0, mathcad, visio

CODES AND STANDARDS KNOWN
* American, British, DIN and Indian codes and standards.
* Fluor Daniel standards
* Dupont standards
* Saudi Aramco standards
* Shell Dep. Standards

EMPLOYMENT HISTORY:

FLUOR DANIEL CONSULTANTS B.V., Kuwait (Sept, 2003- To date)
Position- Lead Civil/Structural Engineer.

Projects worked for:
* Mina Al Ahmadi Refinery, (KNPC), Kuwait.
* Mina Abdulla Refinery, (KNPC), Kuwait.
* Shuaiba Refinery, (KNPC), Kuwait.

Nature of Project:

Provide Project Engineering Consultancy Services to KNPC to Upgrade all the three Refineries under a contract spanning 5 to 7 years based on various Work Orders.
This includes revamp and installation of new units in all the three Refineries.

FLUOR DANIEL ARABIA, AL-KHOBAR, SAUDI ARABIA (14, Nov1995 – 31 Dec1997)
(Deputed from Saudi Designers Engineering Consultants)
Position- Lead Engineer

Projects worked for:
1.Saudi Chevron Petrochemical Plant, Jubail, Saudi Arabia. Promoted by Chevron Corporation for manufacturing Cyclonhexane (372 million ton/year), Benzene (482 million ton/year) and motor gasoline (372 ton/year).
2.Middle East Battery Project, Dammam, Saudi Arabia.
3.Rabigh Steam Power Plant, Rabigh, Saudi Arabia.
Design of non-plant buildings and utilities.

SAUDI DESIGNERS ENGINEERING CONSULTANTS, (8, Feb 1994-30, April 2003)
Dammam, Saudi Arabia)

Position: Engineering Coordinator/ Lead Structural Engineer

Projects worked for:

1. IBN-ZAHR Petrochemical plant (SABIC Industries, Jubail, Saudi Arabia) – Yearly contract for engineering services for modifications and additions in existing petrochemical plant.
2. Saudi Arabia International Petrochemical Company (SIPC), Jubail, Saudi Arabia.
Partly involved in the design of feed stock pipeline, Product pipeline and tank farm.
3. Arasco Dicalcium Phosphate Plant, Dammam, Saudi Arabia.
Detail Engineering of complete Plant and utilities.
4. United Gulf Steel Rolling mill, Jubail, Saudi Arabia, (350, 000 MTPD Medium Section Rolling Mill)
Detail engineering of complete plant and utilities.
5. Al Hamrani Unsaturated Polyester Resin Plant, Jubail, Saudi Arabia.
Detail Engineering of complete Plant and utilities.
6. 120 MTPD Formaldehyde Plant, Jubail, Saudi Arabia.
7. 7 MTPD Hexamethylene Tetramine Plant, Jubail, Saudi Arabia.
8. National Industrial Gas Co. (SABIC Industries)-
9. 60 MTPD Para Formaldehyde Plant, Jubail, Saudi Arabia.
10. Precision Forging Plant For Al-Suwaidi Inustries, Dammam, Saudi Arabia
11. Waraq Paper Expansion project, Dammam, Saudi Arabia
12. Modecore Decorative lamination plant, Jubail, Saudi Arabia.

CHEMTEX ENGINEERING OF INDIA LIMITED, BOMBAY. (18, Jan1993-1,Feb 1994)
Position: Lead Structural Engineer

Projects worked for:
* Design of main process plants for Tyvek Line-4 project promoted Dupont, USA Commissioned at Virginia, USA.

TOYO ENGINEERING INDIA LTD. (20, Sept 1989 – 11, Jan 1993)
Position: Civil Engineer

Project worked for:
1. Float Glass India Ltd. (Promoted by Asahi Glass, Japan)
2. Chambal Fertilizers and Chemicals Ltd. (Ammonia and Urea Plant)
Structural design of various off- site facilities.
3. SM Dychem Project (Ethylene Glycol Plant)
Structural design of Reactor building.

MEHTALIA AND ASSOCIATES (1, April 1989 – 9, Sept 1989)
Position: Civil Engineer

Project worked for:
1. Acrylic India Ltd.- Design of main process plant
2. U.S Vitamin Ltd- Design of plant and utility buildings.

SHAH TECHNICAL CONSULTANT, Bombay, India (1, Nov 1985 – 31, Mar 1989)
Position: Civil Engineer

Project worked for:
* Design of various city water and sewerage distribution system
* Design of water and sewage treatment plants.
* Underground and above ground water tanks, pumping stations, etc.

EDUCATION:
B.Tech degree in Civil Engineering
Calicut University

LANGUAGES KNOWN:
English, Hindi, and Malayalam.

REFERENCES:
Available upon request

View contact information...
«« previous resume next resume »»
Search Results (Resumes 651 to 700 of 6635)Go to Search Parameters...
Brief Description
Ph.D in Safety Engineering, looking simililar job either consultant, or mining, mechanical engineer or any safety related job
See resume body
Free! Planning / Scheduling, Project engineering, Subcontracts administration, Primavera, Open Plan,MS Office,Pipeline design/construction/replacement
Objective: I would like to pursue a challenging position in the oil and gas industry working as a development geologist developing oil and gas fields along the Texas Gulf Coast.
Maint Planning, Materials management, warehouse, plant maint, turnaround, project
Ph.D in Geophysics, over 12 years industry experience in offshore and onshore seismic 2D/3D data analysis, processing and interpretation
Reservoir/Geoscience Technician
Completion/Workover Supervisor
I am a mechanical engineer possessing over 15 years of rich experience with the Oil and Gas sector and Petroleum Industry. The basic areas of my expertise are Planning & Development, Project Management & Execution, Design and Detail Engineering.
Having qualification CSWIP 3.2 & Bgas grade2 from TWI - U.K
Petrophysicist, 11 years experience. Strong well log interpretation in vertical and horizontal wells. Thorough knowledge of Wireline / LWD tools. Experience in Clastic and Carbonate reservoirs. Expertise in core-to-log reconciliation and neural networks. Co-author on two books on well-logging data a
Degree in Instrumentation, National University Indonesia, graduated 1993. 14 years Experiences in Oil & Gas Business as an Instrument engineer.
Inspection head in ExxonMobil Campana Refinery Argentina. 26 Years of experience in fixed Equipment Inspection. In charge of all Fixed Equipment Inspection and QA/QC including Contractor Management, new hired Inspector training, Technology improvement and cost control. Expertise in Coke Drum Inspect
Instrumentation ICSS commissioning specialist
SPECIALIST IN PRECOMMISSIONING, COMMISSIONING AND START-UP
CONTROLS AND SOFTWARE SPECIALIST
My experience includes expert-level competencies in Mechanical Design Engineering, in Piping Materials Specification, in Pipe Stress Analysis and in Piping Items & Mechanical Package Procurement for Refineries, Off-shore Oil & Gas Platforms, Petrochemical Complexes, Chemical & Pharmaceutical Plants,
INSTRUMENT ENGINEER
Senior Reservoir Engineer with 20 years experience in Reservoir Simulation and reservoir management. Very good experience in Well Test Analysis, reserve estimates, material balance and enhanced oil recovery schemes.
I am a Civil Engineer w/ 28 yrs experience in oil & gas, infrastructure and gen. const
I have been working for the past 22 years in project controls / planning, construction and maintenance disciplines in Oil & Gas, LNG, Fertilisers, Petrochemicals, Power and Refinery. I have a good knowledge of International Standards & working practices. Thorough knowledge of Primavera (P3).
Good communication,Self motivated,Analytical and Team player. B. Engr. Elect/electronic
Telecom Engineer transmission speciality more than 16 years experience
18 years experience: design of suppression and alarm systems, manage design, review P&ID for HPR chemical plants, CFD modeling, nuclear industry FHA, performanced-based: (fire exposure, fire endurance, smoke control) designs, firefighting experience 5 years
Position Objective: Senior Managerial position in electrical or electro-mechanical industrial firm. The aim is to bring the facility’s productivity, profitability and quality up to a highly recognized standards utilizing personnel, technology & procedures.
I am an Indian national presently seconded to Brunei Shell Petroleum, having more than 13 years of Experience in the field of Oil, GAS (Onshore and OFF shore), petrochemical plant and project experience in the field of Reliability, Inspection, Construction & QA/QC, Pipeline, Piping.
I am working from 1999 to peresent as drilling supervisor in oil and gas fields in offshore in gulf and onshore in south of iran in exploration &new well&workover wells. I have IWCF certificate.
Experience well test engineer
OIL & GAS COMMISSIONING FOR PROCESS PLATFORM / DRILL SHIPS LIKE : MOSVOLD-1/2
With Thirteen years experience for working on different types and application on line gas and liquid analyzers and gas Chromatographs all over India, Saudi Arab, Qatar in most of the industries like Refineries, Offshore sites, Fertilizers, Steel plant, Petrochemical plants etc.
Construction management, supervision and engineering of mechanical and welding works e.g. oil and gas pipelines, pig-, pump/ compressor and metering stations, industrial plants, structural steel, filling stations, town gas and water distribution systems, working on oil- and gas life lines e.g. maint
17 Year expereice in Insrumentation , GE Harris, Realflex & Invensys SCADA Systems, ABB & Invensys DCS systems.
Piping related job like draftsman or designer ability to work on microstation, have experience of near by 35 years as piping draftsman;
Mechanical engineer in Repair and maintenance of Rotating equipment such as Pumps, Compressors(Reciprocating and Screw types), Gas Turbines(Solar Centaur), Air Fans and Blowers
Consulting Drilling ,workover, ,Directional Drilling ,Mud engineer
DIPLOMA IN ELECTRONS&COMMUNICATION ENGINEER
PABX SERVICE ENGINEER
Production Engineer with 12 years of industry experience
BSc in env. MSc in safety eng.
Over 25 years of teaching practical and theoretical in the field of mechanical maintenance in the Philippines and Middle East
Twenty(20) years of experience in detail engineering/FEED/PMC of petrochemical complex/refinery/major industrial projects. 11 years wotking in middle east countrirs. Familiar with international codes and standards.
A highly experienced Pre-Commissioning, Commissioning, Start-Up and Field Engineer, Coordinator, Supervisor, Shut-Down planner, having worked on many varied projects Having a Degree – Marine Engineer, (Ship Engineer)
Proven ability to provide Industry initiative and leadership. 20 years of experience. Extensive SCADA, PLC, DCS and HMI Project Management Consulting knowledge.
GRADUATE DIPLOMA HOLDER (3 year fulltime study) in MECHANICAL ENGINEERING, having Certifications as SENIOR WELDING INSPECTOR (CSWIP 3.2) -TWI LONDON, NACE (USA) COATING INSPECTOR LEVEL 1 – CERTIFIED, NQA (UK London) Certificate of Training in ISO 9001-2000 QMS Auditor, ASNT LEVEL II-RT,UT,MT,PT
Petrophysicist, Log analyst
He is the Manager of Technology Development in Exploration & Production in the Corporate Direction of Strategic Planning of PEMEX. Previously, he was Well Productivity Manager in the Technology and Professional Development Vice-presidency of PEMEX Exploration & Production. Also, he has been the head
QA/QC engineer/inspector in piping/pipeline and facilities construction in oil/gas. And an HND in welding/fabrication .
DCS Lead Engineer
Experienced Geophysicist
10 years in Geophysicist
First   1   2   3   4   5   6   7   8   9   10   11   12   13   [ 14 ]   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com