Resume - Experienced in Oil and gas projects.

Misco Jobs

Resume #29826

CONTACT INFORMATION:
View contact information...

Period: From NOV 2003, MPN, Nigeria
Working in DCS Alarm Management Project for MPN as AMP Advisor in (Mobil producing Nigeria - a subsidiary Of ExxonMobil). The work involves the risk analysis of all the DCS alarms related to offshore platforms like OSO, Idoho, BRT ( LNG facilities) etc., benchmarking of alarm systems and limplementation as per MPN Alarm management philosophy.

IN ENGINEERING MAJOR CAPITAL PROJECTS

Period: December 1998 to October 2003
1.GAS Lift project, Dukhan., 2. Dukhan Consolidated Facilities Upgrade (DCFUP) Project, Dukhan
Worked with Qatar Petroleum, Qatar as Construction Engineer (Instrument and Control) Involved in preparation of Tender documents, Scope of Work, Review of Specifications, Detail Design and construction Drawings related to electrical & instrumentation and systems from the client side.
Responsible for monitoring EPC contractor for execution, supervision and progress monitoring of installation/upgrading the existing systems, inspection and Commissioning works for various stations related to new equipment, vendor packages like Instrument Air Compressor, Turbine (Solar and GE MARK V), Emergency Diesel Generator Packages, HVAC, UPS. Dehydration Units, Hot Oil Heaters with DCS, F&G, SCADA, ESD systems. Worked in home office for doing the same. Site Co-ordination with other discipline engineers, EPIC Contractor, Equipment Vendors and QP Operation and Maintenance Group.Shutdown pertaining to Instrumentation, Control and Safety systems and Equipment. Review of Vendor Drawings, Quality Control Procedures, Inspection &Test plan, vendor's data book. Done the Site Acceptance Test for the systems like DCS, F&G, ESD, SCADA, electrical LV Switchgears with intelligent module (MM5) of Bailey, Triconex, Honeywell, Allen Broadley, S&I.
Review of As built DWG's, Vendors dossier for final acceptance.
Having worked with process investigation/engineering and done several on line modification of the existing process and control/interlock systems to suit the changing plant operation requirements
Experienced with engineering specifications and applicable design standards like API, ISA for selection & control of instrumentation system
Fully conversant with complete process system and experienced with instrumentation control & interlock systems of Dehydration Units, Hot Oil Heaters and Air Compressor Units.

* Worked with M/s. Costain, U.K., as Electrical & Instrumentation Supervisor from April
98 to Nov 98 for Qatar Petroleum, DCFU PROJECT, Qatar. Supervising the Electrical & Instrumentation activities like installation, testing & Pre-commissioning, Commissioning works in Khatiyah South Degassing Station.

* Worked with ASAHI TECHNEION, KUWAIT, from October 1996 to June 1997 as Lead Instrument Engineer for Petrochemical Industries Company (PIC) Polypropylene Plant, Kuwait.

* Worked with M/s. Kinetics Technology India Ltd., Delhi, India (A Mannesman Company) as Senior Engineer from May 1995, for Hydrogen Plant at Mangalore Refinery & Petrochemicals Ltd. (MRPL), Mangalore. Have exposure to Project Co-ordination Planning, Estimation and Supervision of the Works including preparing Bill of materials, material availability as per Spec, for timely completion of project.

* Worked with M/s. Soimi (Nigeria) Ltd., - Member of Asea Brown Boveri (ABB) Group as Lead Instrument Engineer from February 1993 to December 1994 at Nigeria.

* Incharge of Inst. Dept looked after Calibration, Installation, Commissioning, Maintenance, and Co-ordination activities of Instrumentation and control systems for Fuel Gas Separators, Dowtherm Crude Heaters. Process areas like Setting Tanks. Wemco Depurator, Emulsion and Skimmer Tanks, Gas Turbine (GE make Frame V) including Smokeless Flare System at MOBIL QUA IBOE Project, EKET from the Offshore Platform well fluid.

* Calibration, Installation, Pre-commissioning, Maintenance of Instrumentation and control systems in Nigerian National Petroleum Corporation (NNPC) PortHarcourt Rehabilitation Project. Hands on experience with all types of Pneumatic and Electronic Instruments with Yokogawa Centum XL DCS System

* Techno Concepts (Instrumentation Consultants), Baroda, India as Site Commissioning Engineer from June 1992 to January 1993.

* Assigned with Instrument Commissioning work at Gujarat State Fertilizer Company (GSFC), Caprolactum Expansion Project with Yokogawa Centum ¨C XL DCS System and Indian Oil Corporation Ltd., (IOCL), Gujarat Refinery, Udex revamping job with Tata Honeywell TDC 3000 System.

* M/s. Satwik Electric Controls Pvt. Ltd., Nasik, India as Service Engineer from March 91 to May 1992.

* Hands on experience in Calibration, Erection and Commissioning, Maintenance of Temperature, Pneumatic and Microprocessor based systems in various Sugar Mills in Tamil Nadu.India

* Electronic Development & Training Centre, Madurai as Assistant Testing Engineer from January 1984 to December 1989.

* Testing and Servicing of Medical Electronic Equipment and Activities related to Electronic Products Development.

* M/s. Mercury Electronics, Madurai, India as Electrical Supervisor from May 1981 to December 1983.

* Supervising the Productive Goods and Maintaining Machineries related to Electrical Manufacturing Unit.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1501 to 1550 of 6558)

Go to Search Parameters...

Brief Description

Pipeline Construction, Horizontal Directional Drilling, surveying, ground surveying, for number of River crossings in India & abroad

Experienced mud engineer

Over 8 yrs. experience in Inspection & QA/QC functions encompassing inspection of equipments for oil\gas and power generation projects, NDE of piping, pipelines and structural welding, qualifying WPS, PQR, WQT, dev. of inspection methodology & QA procedures for oil -gas projects

Project Planner/Scheduler/Controller with experience in the oil & gas, EPC and Construction industry. Involved in Planning, Scheduling, Project and Cost Control.

Five Years (1/2003 : Until now ) as HSE Engineer, Supporting Health, Safety, Environmental Protection, Fire security and Training Requirements Relating to the Full Range for Offshore and Onshore Construction and Operational Activities of Oil and Gas Industry in Petroleum Company.

I am an AWS CWI Certified Welding Inspector (#05110391), API 510 Pressure Vessel Certified Inspector (#27442), API 653 Above Ground Storage Tank Certified Inspector (#26681), API 570 Piping Certified Inspector (#27026), API 571 Corrosion and Material Certified Inspector (#30167), API 580 Risk-Based

Structural/piper with pdms & cadworx training

Mechanical Engineer specialized on Design of Pressure Vessels and Heat Transfer equipments for oil, gas and petrochemical Projects.

Reservoir and Production Engineer

yokogawa DCS engineer in maintenance department ,cs3000 and familiar with difrent type of PLC

I DIploma Electrical Engineer. I am also qualified for inspection and approval of Equipments in Hazardous Area Location. I have very good experience in E&I Inspection and Field Engineering - E&I.

wireline specialist and downhole gauges engineer

Mechanical/Piping descipline engineer with 6 years experience in oil&gas industries.

Mr. McKay excels at solving geotechnical and landfill problems and is available on a project specific or long term basis.

I have high experience in industrial and marine equipment: Oil Tankers, LPG, strong background in electric and electronic equipment, and base of pneumatic and hydraulic equipment. I have excellent experience in control panels, reading of electrical diagrams and modifying them

Having an Overall inspection experience of 9 years in the Paint Industry and Construction Companies, out of which 8 years in India with Multinational companies and 1 year Overseas experience in handling different projects like Petrochemical, Refineries, Oil & Gas, Chemical Plants, Wind Energy Forms,

For the past 6 Years have experience in Gulf like SAUDI and UAE. Had been worked 5years in "AL NAJIM SAUDI INTERNATIONAL COMPANY "(NASICO) at Dammam, K.S.A.

Chartered electrical engineer experienced in Instruemntation filed. Trained in QMS ISO Lead auditor course.

Mech Engineer, 10 years EPC experience in packages for oil & gas; gas dehydration, stabilization, water, effluent, pumps, utility equipment

Facility Engineer for oil and gas

Graduate in Electrical Engineering, with 14 year experience, of which 6 years in Refinery/Gas plant. Familiar with all maintenance & construction activities.

I have 20 years experience across the petrochemical industry, including Petrochemical refining, offshore gas compression, FPSO experience, and fixed platform oil/gas separation and export. Supervisory/Control Room/Commissioning. In many countries, Singapore, Dubai, Qatar, Brazil, U.K.

Over 20 years of various offshore vessels, ship yards, offshore rig, gas platforms, drill ship and engine factories as Oilier, Junior Engineer, Technical Staff, Mechanic, Marine Engineer, Rig Mechanic, Maintenance Engineer, Chief Engineer, experience with expertise in following: Supervision and Tra

A professional (M.Sc.degree) well qualified Instrumentation / Process Control Engineer, with 24 years in-depth design, management, consulting, maintenance, and teaching experience; PEO and APEGGA license.

Instrrumentation design, detailed engineering, procurement, construction, commissioning

Experienced in Oil and gas projects.

Time served Electrical Engineer with 16th Edition qualification.

Danish marine geologist. Experienced in acquisition and interpretation of seismic data - scientific production of 6 papers on the topic. Seismic facies and texture interpretation. Experianced in Landmark interpretation tools. Fluvial, deltaric and coastal environment interpretation.

Skilled in using Hysys, Microsoft Office , VBA, AutoCAD, RSI Indiss, Somcon X;2. Ordinary in using ASP, HTML , C/C++, Visio, VB, CS3000, TDC3000, PKS, petrochemical process operation .

B.Sc. of Petroleum Engineering from Suez Canal university with general grade “Good“ in may 1992 Refining Eng. Branch.

Drilling Engineer: Challenge-driven and decisive professional offering nearly 16 years of experience as Drilling Engineer / Production & Operations Engineer on land, jackup, and off-shore platform drilling rigs. US & International.

PETROLEUM ENGINEER HAVING 16 YEARS OF VERSATILE EXPERIENCE IN PRODUCTION OPERATIONS.

To work for a company in the petroleum/oil field that allows professional and personal growth.

A position utilizing strengths in leadership and technical operations to accomplish Company objectives. Willing to travel and/or relocate.

Total 18 years of design and project management experience in offshore and onshore construction field. Working in M/S Oil & Natural Gas Corporation Limited of India (ONGC) since July, 1985. Documentation and project implementation under ISO 1994 / 2000 for past 4 years.

I have More than 16 years experience with pioneer engineering companies. My major experience is as “Document Data Controller/ Incharge Design Department, refineries and process industries. I am ready to join on short notice.

Extensive experience as an engineer with proven ability to be a part, manage, and provide support and team supervision for startup / acceptance testing, troubleshooting, calibration, and maintenance of systems. Experience in applying UL, NEC, NFPA, CSA, and FM codes and IEEE standards.

Professional and educational background include detailed working knowledge in the following areas: Health, Safety & Environment (professional educational background: NEBOSH National General Certificate graduated and International NEBOSH Diploma Programme started at the end of 2007)

Corporate QA Engineer

Process Engineer working with DSM(Work Exp. 5 years)

PRODUCTION CHEMISTAND FLUID BEHAVIOR SPECIALIST WITH VAST EXPERIENCE IN FLOW ASSURANCE STUDIES

my skills are coating inspector,piping inspector, welding inspector n have various ndt certificates

Diagnostic by analysis vibration, balancing, alignment, Control by infrared thermography, Intallation of on-line systems

VARIOUS FIELDS OF INSTRUMENTATION AND PROCESS AUTOMATION, COMMISSONING, PROJECTS

Cementing and stimulation engineer with previous experience as field engineer, sales engineer, and in-house coordinator.

Reservoir simulation, reservoir rock and fluid characterization, production optimization, static and dynamic test analysis

Organic chemist

A professional petroleum engineer based in Hassi Messaoud, Algeria, with over 5 years of experience in various aspects of petroleum engineering. Looking for a challenging and interesting opportunity world-wide. Fields of interest: Reservoir engineering. Production engineering. Petroleum engineering

BE with first class. Action taking, decision making, high confidence level, good team leader, good communication skills, hard working, excellent faultfing skills, logic development and control configs.

Free! Strong skills, working knowledge, and extensive experience in Petrography, Structural Geology, Geologic Mapping, Mineral Exploration, and Remote Sensing.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 [ 31 ] 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out