Resume - I have total Twenty-one years hand on working experience in Electrical maint. an...

Misco Jobs

Resume #30506

CONTACT INFORMATION:
View contact information...

EDUCATIONAL QUALIFICATION
1 SSLC 1979 Govt of Kerala – Board of Education
2 HSC 1981 St.Thomas College, Kozhencherry, Kerala.
3 NCTVT (Electrical) 1983 Govt of India ministry of Labour

TOTAL WORKING EXPERIENCE Twenty one years
Oil & Gas Fields Eight Years
Power Stations Five Years
Steel Plant Six Years
Edible Oil Company Two Years

SAFETY COURSES:
HSE Induction, First Aid, H2S Awareness, NORM & LSA, Emergency Response, Safe Act/ condition audit, Safe Handling of Chemicals, Electrical Equipment in Hazardous area, Permit to work, Electrical safety Rules (ESR) and electrical Safety Operational procedure (ESOP)Training: LM-2500 Gas Turbine Operation training course attended in Salalah power station, Oman Computer Knowledge: Words, Excel, Impower & Benchmate

EXPERIENCE
Position Electrical Supervisor (Transition)
Period From February 2005
Company Conoco Phillips, CSDGL Gas plant, Syria
Job Responsibility -: Working as an Electrical Supervisor in Conoco Phillips CSDGL Gas plant Transition Dept. Preparing System Dossiers, Plant Inspection and make a smooth Transition to the CSDGL gas plant from Conoco Phillips to Syrian Gas company (SGC).

Position Sr.Electrical Technician
Period December 2002 to November 2004August 1996 to April 2001
Company Shell – Al Furat petroleum company, Syria.
Job Responsibility : Worked as a Authorized Electrical Person (AEP +) in the central production facilities (CPF) and various outstations of TANAK Oil & Gas Filed of AFPC, on 29-27 ON/OFF cycle which including High Voltage & Low Voltage Isolation and De-isolation, Fault finding and trouble shooting of the electrical equipment in the Oil & Gas field as per A.F.P.C HSE policy including PTW, ESR and ESOP. Schedule all planned and corrective maintenance activities and familiar with all safety and Permit to work procedures associated with working on process equipment located in Hazardous area and good understanding of a special requirement for company standard. Fault finding and trouble shooting of the power and control circuit of various types of HV & LV Breakers (ACB, VCB, OCB and MOCB), Transformers, HV and LV motors up to 6.6 kV, various types of starters and control panels, GAS Compressor, Heater Treater, V.R.U Plant, Cathodic protection systems, HVAC system, Batteries (Lead Acid &Alkaline) and charging system etc. Operation and maintenance of Generation and distribution systems (3.3 KV, 20 KV and 66KV) including start up, Synchronizing and feeder operation of Gas and Diesel Generators (415 V, 1000 KVA) and solar turbines (3.3 KV- 3 MW). Operation and maintenance of substations (3.3KV, 6.6KV, 20KV & 66KV) are including switching program and feeder operation etc.

Position Electrical Technician
Period May 2001 to May 2002
Company Petroleum Development of Oman (PDO), Oman.
Job Responsibility: Worked in the onshore Oil and Gas field in P.D.O - Fahud on 62-29 on/off cycles. Which including operation and maintenance of electrical equipment associated with the Oil and Gas field as per P.D.O - H.S.E policy. And also conversant with Electrical permit to work system (EPTW), Electrical safety Rules (ESR) and Electrical safety operational procedure (ESOP). Operation and maintenance of Gas and Diesel Generators and solar turbines including start up, synchronizing and load sharing of the generators. Faultfinding and trouble shooting of the generators protection system, Auxiliary system and Excitation system. Maintenance and trouble shooting of various kind of high voltage and low voltage equipment such as 6.6 kV motors up to 1250 HP, various kind of LV motors, M.O.V.s, breakers, control panels, Gas Compressor etc. Operation and maintenance of various high voltage equipment, such as BBC, ABB circuit breakers, and operation maintenance of Sub stations (11 kV and 132 kV) are including switching program and feeder operation. Maintenance of lead Acid batteries, alkaline batteries, UPS system and Batteries charging system etc.

Position Maintenance Electrician
Period June 1993 to August 1996
Company Ghubrah Power Station, Muscat - Oman
Job Responsibility: Worked as Maintenance Electrician in Gas Turbine Electrical Maintenance Dept. Including breakdown maintenance, Routine maintenance and Shutdown jobs of the ALSTHOM FRAME-5 (24 MW x 9) and GE FRAME-6 (36 MW x 2) Gas Turbines. Faultfinding and trouble shooting of the Turbine Auxiliary system, Generator excitation system. H.V and LV Breakers, HT and LT Transformers and all other electrical equipment's in the power station.Operation and maintenance of the STEWART AND STEVENSON LM-2500 Gas Turbine (20 MW) at Salalah Power Station.

Position Switchboard Operator (Control Room Operation)
Period January 1992 to April 1993
Company Nizwa Diesel Power Station, Nizwa -Oman
Job Responsibility: Worked as a switchboard Operator in Nizwa Diesel power Station, which consists of Control Room operation including start up Synchronizing and Load Sharing of the various capacities of the Diesel Generators (KHD, SKL, RUSTON and MIRLES BLACK STONE). Feeder operation and all switchboard operation up to 11 KV distribution systems.

Position Maintenance Electrician
Period September 1990 to January 1992
Company Marico Ind Ltd, (Edible Oil Company), India
Job Responsibility: Worked as Maintenance Electrician which includes breakdown, preventive and shutdown maintenance of the Continuous process plant (HV and LV breaker, AC and DC motors, various types of starters OCB, ACB, and MCC'S)

Position Maintenance Electrician
Period November 1983 to August 1990
Company Hemanth Steel Pvt Ltd, Jalgaon - India
Job Responsibility: Worked as Maintenance Electrician, which includes operation and maintenance of Slipering induction motors and Control System (500HP to 1000HP motors). Faultfinding and trouble shooting of the Electrical Control Panels, Battery and Charging System, UPS system etc. Operation and maintenance of Chilling plants and Low voltage Generators (415 V -1500 KVA).

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1751 to 1800 of 7050)

Go to Search Parameters...

Brief Description

HND , ELECTRICAL/ ELECTRONICS ENGINEERING (Power and Machine Option)

I finish my contract in South Africa as Safety Advisor on “Polaris” Barge (Acergy) for his dry dock. I obtained my master's degree (Engineering and Chemical safety) in 2003. My career really started In 2005 in the off-shore, on the drillship “Pride Angola” where I sailed for 3 years.

I am an instrumentation and automation engineer with over 5 years experience in oil&gas, refinery and petrochemical fields, covering detail design and site installation/ precommissioning/ commissioning activities.

B-Tech in mech with 7.5 years of experience in plant design arena

Eletrical enginer for 8 yrs experince as chief enginer

Civil Structural Engineer

I have near eight years experience in field of piping design of refinery, oil and gas with position as piping lead engineer & assistant manager, furthermore I am fluent PDS, PDMS, Smart Plant Review, Plant Design Review, AutoCad, Microstation, Microsoft office, etc.

weldin inspection

Having a Diploma in Mech. Engg. with 18 years of Experience in Designer

Energetic and productive professional with broad-based experience in Maintenance Planning, Shutdown Planning and Project Management in Line with the Computerized Maintenance Management System.

I have total Twenty-one years hand on working experience in Electrical maint. and operation fields in various organization.

Control Electrical HV &LV equipment and Instrumentation Installation & Test, Cable wiring

Seeking a challenging career as a Reservoir/Petroleum/Production Engineer in an E&P Company

15 years of progressive experience and responsibility with documented success in the areas of drilling, workover, completions, engineering, operations and supervision at various organizational levels. I’m seeking a challenging position as a Drilling &/or Work-over Engineer / Superintendent.

18 years experience in process design of refinery and petrochemical units.

Over 14 Years in Maintenance planning, Shutdown/Turnaround Planning in petrochemical Industries. And also in Maintenance of various Rotating and Static Equipment ;Construction Planning including costing.

A consulting petroleum engineer / project management position in a challenging environment which requires significant technical expertise. Available for immediate travel, domestic or worldwide.

I am a Chemical Engineer having more than 18 years experience in various Oil Processing / Gas Treatment / Petrochemical Process Plants . I have 6 years of Onshore / Offshore Oil / Gas Plants Operational Experience as a Production Supervisor.

Job Title : Software Enginer Education : Ordinary Degree in Bachelor of Science Previous Employer: Motorola Australia Software Centre

Expert in understanding permeability of the carbonate reservoirs. With this help reservoir engineers can do their well level simulation rather easily. Fees are charged for every foot of well data studied. Work will be done at the place of the expert.

More than fourteen years hands-on and supervisory experience in Petroleum Refineries in Qatar, Saudi Arabia and Pakistan. Have been analyzing samples from all streams of different units. Have been acting as Lab. Group Leader during Group Leader's leave/absence.

A well rounded drilling personnel with a unique experience in drilling and completion / work over operations

Over twenty years in plants, and pipeline construction, Inspection and supervision, including several overseas assignments.

Quantity Surveyor/Estimator (Mechanical)

All descriptions of skillsand experiences are listed in resume. I am available to begin work immediately.

Instrumentation Engineer with 15 years of experience in maintenance, teaching and construction

Primavera , MS Project

A self-motivated mechanic with over twenty years worldwide experience, in mechanical/ maintenance engineering’s high-pressure environments; from marine engines, top drive, rotary tables, auxiliaries, hydraulics, and rig upgrades. I am hard working, resourceful and reliable.

Working as Geosteering engineer, meeting with client, collect data, model preparation, landing section, lateral section, steering while drilling, report. Communication to all participant while drilling execution.

i am graduate mechanical engineer having 7 years expereince in piping/structure fabrication and erection in the kingdom of bahrain.we were making the items like tanks , pressure vessels,pot shell,pipe stack , pipe racks for oil and gas sector, petrochemicals and off shore products.

I have extensive experience on Electrical Engineering studies , construction , Transmission & Distribution and Oil & Gas during my assignment on Total E&P Yemen and Petomar in Angola. Designing, modifying, and implementing electrical system my daily challenging job.

ASNT L III UT AND WELDING INSPECTOR AWS CWI QC1.

I am a Structural Designer with over 7 years experience in design of offshore and onshore oil facililities, building and other civil infrastructures

Seven (7) years experience in designing fire protection systems for petrochemical plants and similar industries. I am familiar with NFPA and other internationally accepted standards.

7 years experience in Mechanical maintenance

- Good at English and drilling software.

16 years of Piping & Pipelines Project Management/Project Execution experience in the Industries like Refineries, Hydrocarbon, Petrochemical and Oil&Gas(Cross Country Pipelines, Booster Pump stations, Oil Station, Gas Station, Up-Stream flow Lines).

GRADUATE MECHANICAL ENGINNER,CSWIP 3.1 WELDING INSPECTOR CERTIFIED BY TWI,UK,ASNT LEVEL II IN RT,UT,PT,MPT,IRCA UK APPROVED ISO 9001:2000 QMS LEAD AUDITOR COURSE PASSED. MORE THAN 8 YEARS EXPERIENCE IN QA/QC,WELDING INSPECTION IN EPC OIL&GAS

Making electrical design by using program ETAP such as Load Flow Study, Short Circuit, Motor Starting, Relay Coordination, Transient, and also calculation manually as a proof of the software.

Iam a Graduate Mechanical Engineer with MBA in Poduction Management and a PG. diploma in Materials Management with around 8 + Years of Experience in various MNC's (Oil & Gas, Process/Chemical, Metallurgical, Pharmaceutical.etc.).

An enthusiastic and self motivated Production and Process Engineer, with experience on production optimization and surface equipment designing and evaluation, focused on maximizing asset production capacity and productivity in the oil and gas industry.

HSE Manager, Experience in HSE studies of seismic exploration 2D and 3D since 2004 to the date

Oil and gas mechanical technician

I have diploma with 20 years experience in construction/maintenance. 10 years in oil industries maintenance, also witness commissioning and start up of new installations in the refinery. Hands on experience in 33/11/3.3kv/440v systems.Available in one month time notice period.

Specializing in ICT/SCADA planning Proven Technical & Management Expertise with 14 years Experience overseas-Kuwait and Japan.

See resume

Resume for Project engineer position

Expert INSTRUMENTATION , SCADA, TELECOM , DCS OR SAP / ERP , DESIGN , ENGINEERING , PROJECT MANAGEMENT , OPERATION AND MAINTENANCE , TECHNICAL SERVICES , ISO’S ETC

Industrial engineer, ample experience in catalytic cracking technology and liquefied natural gas, seeks position to apply knowledge acquired as researcher over past four years. Having lived in Latin America and Western Europe, have developed effective multi-cultural skills.

Chemical engineer with over eight years experience in an oil refinery. Utilize exemplary leadership, time-management, critical thinking/analysis, problem resolution, written/verbal communication and human resources management skills to plan and schedule operational, production and dispatch facility

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 [ 36 ] 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out