Resume - I have been in the offshore industry for more than 23 years, my recent experienc...

Misco Jobs

Resume #3091

CONTACT INFORMATION:
View contact information...

Nationality: UK
Age: 53

October 2002 – Present Day
Position: Commissioning Manager
Working for Protomax as a consultant in the construction of three submersible swamp super drilling barges for PT ApexIndo Pratama Duta of Indonesia. In this position I have been responsible for firstly compiling and writing all the equipment and system commissioning procedures for the three vessels Maera, Raissa and Yani. Then organising and supervising the actual commissioning of the rig equipment and systems. Working closely with the classification society (BV) and the shipyard Keppel FELS of Singapore. The work is ongoing at this time and is expected to be complete in middle late May 2003.

1980- Sept 2002 Transocean Inc.
Position: Project Superintendent.
Working within the Technical Support Group based in Singapore.
Recent assignment:: Project Manager responsible for the upgrade of a company vessel from a 5k to a 7.5k high pressure mud system. The project involved upgrading mud pumps, renewal of the complete high pressure mud lines and standpipe manifolds, together with low pressure mud mixing systems, associated piping, centrifugals and mixers. Engineering, equipment selection, purchase, shipping to site and installation, together with prefabrication work was solely my responsibility and was carried out under my supervision.
The project undertaken in the field, was successful, completed within the time-frame of 14 days.
Other responsibilities included the re-commissioning of several drilling rigs for start-up on new contracts. This involved close liaison with the Singapore shipyards during special surveys and dry-docking procedures.

1980 – 2001 RBFalcon Exploration Co. Houston TX.
Positions: Piping & Mechanical Systems Team Leader; Chief Engineer, Maintenance Supervisor.
Assigned to the RBS8M and RBS8D Projects, as part of the engineering group responsible for developing and building a new generation of deepwater semi-submersible drilling rigs.
Initially, working in the Houston office during the design and conceptual engineering stages my responsibilities covered the design of the various systems for these rigs, the equipment layouts and drawing approvals. Helped draw up the specifications for the entire rig and also all its equipment, maintaining a close liaison with vendors and manufacturers. Attended many equipment factory acceptance tests on behalf of the company. These equipment manufacturers consisted of Wartsila engines, Boedewes winches, Liebherr cranes, National Oilwell, Varco, Hannon Hydraulics, Hydralift, Schottel and KaMeWa, Caterpillar, Hamworthy KSE, Alfa Laval, Halco, Halliburton, Outreach, Konsberg Simrad ships management and power management systems.

From Houston the project team transferred to the shipyard office in South Korea working closely with the Hyundai Heavy Industries engineering department and the HHI Production Management Team and also ABS classification society. During the building phase, my responsibility was to lead and co-ordinate a team of piping inspectors, mechanical inspectors and the HHI construction foremen, supervising construction and installation of rig equipment and systems within the shipyard. Later in the building phase my team expanded to include the Chief Engineer's, associated engineering staff, Maintenance Supervisors and mechanical staff assigned to operate the rig. Extensive commissioning of the equipment and systems followed involving working closely with the client commissioning team and shipyard team and classification society until hand over to our operations group and client.

This project culminated in two offshore drilling rigs capable of drilling in 8000-9000 ft of water with various concurrent-drilling operations being developed. The first rig, the Deepwater Nautilus is a conventionally moored vessel, and the second, the Deepwater Horizon a fully dynamically positioned vessel, the drilling equipment on both rigs being basically the same. The total investment by RBFalcon in this project was $600+ million.
Both the Deepwater Nautilus and Deepwater Horizon are now successfully working in Gulf of Mexico. With the Horizon being the most successful new rig in Transocean fleet for operational reliability.
A prior project was a smaller $27 million upgrade of a semi-submersible to increase its deep-water capability, this work was carried out in Singapore.

1979-1980 Zapata Marine Service
Positions: Chief Engineer, Shore Based Engineer.
Joined Zapata as a Chief Engineer and promoted to Shore Based Engineer in Abidjan, responsible for co-ordination of the maintenance and repairs to the 6 supply boats in that operation. Also worked alongside the various regulatory bodies organising and overseeing dry-docking and repairs to other company vessels from operations throughout that continent. Also worked in Canada responsible for the dry-docking and sale of two vessels to the Canadian Government.

1966-1979 Ellerman City Liners London U.K.
Positions: Engineer Cadet Officer – Chief Engineer.
Attended the Marine College (Academy) for a period of three years. The first two years were spent in theoretical studies, culminating in the OND in Engineering qualification. The third year was spent in gaining practical 'hands on ' experience in various engineering disciplines. Experience on the company's many and varied merchant vessels followed, completing a further 18 months of apprenticeship, and through merit promotions progressed to the position of 3rd Engineer Officer. In 1974 I attended college for a further year and obtained the 2nd Engineer Officer's license receiving an immediate promotion to that position. In 1978 I attended college again for another year and obtained my Chief Engineers License. Shortly after, received promotion to Chief Engineer. Responsibilities and experience with Ellerman involved running and maintaining large marine propulsion plant and all the ancillary equipment the largest being 60,000 s.h.p.

Qualifications

1968 OND ( Ordinary National Diploma ) in Engineering

1974 2nd Engineering Officer License ( British DOTI ) unlimited horse power Foreign Going

1978 Chief Engineers License ( British DOTI ) unlimited horse power Foreign Going

1997 City & Guilds qualification in Computers & Computing.

Education:

* 1997 University of Sunderland, Learning World, UK
* 1966-1969 South Shields Marine College Co. Durham, UK
* 1965-1966 South West Kent College Tunbridge Wells, Kent UK
* 1960-1965 Wilderness School for Boys, Seal, Kent,

Accreditations
* UK City & Guilds Computers and Computing
* 1978 Chief Engineer Officer's Ticket (Certification/Licence)
* 1974 Second Engineer Officer's Ticket (Certification/Licence)
* 1968 Ordinary National Diploma in Engineering (OND)
* 1966 8 GCE 'O' Level passes in Maths, English, Physics, Chemistry, Physics &Chemistry, Building & Engineering Science, Engineering Workshop Processes. Materials & Engineering Drawing
* 1965 5 GCSE passes in Maths, English, Physics, Music and Technical Drawing
* 1965 4 RSA (Royal Society of Arts) passes in English, Maths, Physics, Geography

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1901 to 1950 of 6511)

Go to Search Parameters...

Brief Description

I have BSc. in Mechanical Engineering, MSc. in Mechanical Vibration of Rotating and MSc. in design of gas turbines. I have >20years of experience with Engineering and Operating Companies in O&G and Petrochemical fields as Senior Mechanical Engineer in Egypt Enppi and in Qatar QP Offshore and QVC

Over 24 years professional experience IT, SAP SECURITY, SAP IS-H*

Dear Prospective Employer,I am 2nd Engr with experience on chemical, oil and gas tanker with motor and steam turbine propulsion.

EXPERIENCE PIPELINE ENGINEER

Engaged in Engineering and design services for Hydrocarbon Processing Industry

fpso, subsea, structural, naval, project management, marine, risk management

Instrument Engineer is seeking a challenging Position for growth and career opportunity in Oil & Gas Industry. More than 13 years of experience in Preventive and break down maintenance for power plant & gas plant instrumentations with GE Frame 6 gas turbines, DCS and Mark V control systems.

I am a Petroleum Engineer with 7 years of oil & gas industry and actively involved as a Drilling Engineer with national and multinational companies. I am fully aware of well planning and execution process and actively involved in office based well planning and day to day opertaions supervision.

BE Mechanical Engineer with 5 years experience in Piping Stress Analysis

Experienced exploration / production geophysicist and geologist with major Exploration Companies

To acquire position of Production Stimulation/ Reservoir Stimulation

Hi I am an engineer with instrumentation as specility and also i have don 3 year diploma in electrical engg . I have total of 8 year of experiance in oil filed construction plus in maintanence an in quality control

Has more than Seventeen (17) Years of continuous experience in Cost Engineering and Quantity Surveying works which involved the following:

Instrument engineer with around 15 yrs of versatile experience in the field of installation,commissioning , operation amd maintenance.

Broadening experience leading to Project Manager and Executive/Board Level opportunities.

Electrical and Instrument Technician, 20 years international experience.

Drafting (Manually & computerized using AutoCAD 2D & 3D), Structural Analysis & Design of Building (Manually and computerized using STAAD & Microfeap Software’s), Construction Estimates, Plumbing/Piping Design, Surveying, Project Supervision and Computer Literate (Microsoft Word,Excel & Powerpoint)

I have total eleven years experience in Oil & Gas campanies with the five years experience in EPC PROJECT and six years experience in TURNKEY & MEP PROJECTS.

Maintenance and calibration of field instrument, DCS and PLC installation, configuration, commissioning, and maintenance.

I am mechanical engineer with 14 years experience in preventive & predictive maintenance for reciprocating & rotating machinery in the oil & gas industry. I have computer & software skills for office and maintenance applications. I have BS Mechanical Engineer degree from the UIS University.

Over eighteen years in QA/QC, inservice and T/A inspection, inspection planning and refinery reliability tasks.

Multi disciplinary engineer

Marine Engineer with 30+ years experience in operating, designing, installing and commissioning marine systems

3 year Diploma holder in electrical Engineering 13 years total experience as senior Industrial Electrician in which 3 years are in LPG plant. Ready to work anywhere.

Thirteen years of continuous experience as Planning Engineer spread out in the field of Project Management, Engineering, Fabrication, Construction, Commissioning and Plant Maintenance for projects such as Oil & Gas Offshore Platforms, FPSO, Petrochemical, Desalination and Power Plants.

I am a well-organized and reliable Instrument Engineer with over 25 years experience within the Petrochemical, Nuclear, and Power & Water Industries. My project involvement has included offshore & onshore maintenance, inspection, construction, and commissioning at technical and supervisory levels.

Over 20 years supervision, construction, design – Pharma., Petro/chem, Micro and Food. Self starter, hands on in fabrication/construction supervision, trouble shooting, scheduling/conflict resolution of different trades on complex plant construction.

Mechanical Engineer (MOS) Refinery and Petrochemical Equipment Degree. Level II SNT-TC-1A for Magnetic Particle, Dye Penetrant, xRay examination, Project Manager course in U.K.

Presently working as a CONTRACTS ENGINEER for the last several years with a Multinational Company in the Gulf. Seeking higher and prospective opportunities.

Development and Implementation of MMI Scada Systems ,Developing Logic and Control Systems, Commissioning and Start-up Assistance, Supervising Electrical and Instrumentation Departments, Design and Engineering Automated Control Systems

-20 years of North American & international Petroleum engineering experience, including reservoir simulation. Strong technical skill ,ability to communicate effectively, -updated several large simulation models, and developed new reservoir simulation models for multiple oil fields.

I am a graduate from a Safety Engineering Technology Program. I have twenty-two years experience in the health & safety field in the areas of mining, oil & gas, manufacturing, and construction industries.

Thirty years experience in the construction, fabrication, and pipeline industry. Have expertise in a variety of areas from years of hands on experience, to Forman, Superintendent, and Management. QC/QA, Safety, Project Management, Consultancy, (Economic/Mechanical), job efficiency, Materials.

Extensive electronics/instrumentation installation, troubleshooting and repair of subsea control systems. This was analog/digital to the component level; this was accomplished on systems controls and computer monitoring , and subsea modules to the board level repair.

Application for the post of Electrical Supervisor

25 years of experience in Production, Drilling, training and administration and costs control

Structural Engineer, PE, with 14 years experience. My experience is in the following industries: Heavy Construction, Petroleum/Oil and Gas, Pre-engineered metal buildings, Mining

To work Overseas

PIPEMILLS,PLATE MILLS, EXPEDITOR, VENDOR INSPECTOR, TECHNICAL WRITER ON PIPE SPECIFICATIONS QA/QC CO-ORDINATOR,

30 years experience in all types of heavy industry, the equipment used, predominately in coatings and linings. Experienced in all phases of construction projects. Supervised numerous larger projects, overseen and implemented safety, inspection.

Working knowledge of marine diesel propulsions and electricity generation systems. Familiar with mighty power engines. Knowledge of support systems such as fuel centrifuges, air compressors, pumps, hydraulics, refrigeration, heating, and air conditioning.

Provide diverse engineering technical support for research, reporting and production. Work history includes oil and gas production, oil and gas debt and equity capital transactions, and oilfield equipment.

I have worked both on and offshore for 30 years. I have also worked in shipyards, including writing commissioning procedures, commissioning equipment and writing preventative maintenance procedures. I have current offshore survival and medical certificates. I am immediately available.

Multi-disciplined sub sea engineer, extensive experience gained in the design, selection, operation, maintenance and acceptance testing of well control equipment, working in a variety of different environments to the standards specified by the manufacturer, drilling contractor and operator

I have been in the offshore industry for more than 23 years, my recent experience has been with new build drilling rigs as Commissioning Manager; Team Leader Mechanical and Piping Systems; Project Superintendent. Previous 14 years experience was with the British merchant navy as an engineer officer.

Seeking a full time position to actively contribute to the technical achievements of a company in the oil and gas industry

QA/QC Welding Inspector

Resume for the job in maintenance or operation field.

More than 26 years experience directly involved in the offshore oil and gas industry. Experienced in detailed structural engineering, fabrication and installation of offshore platform topsides including floatover installations and Floating Production Platforms.

SCADA Specialist

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 [ 39 ] 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out