Resume - 30 years experience in all types of heavy industry, the equipment used, predomin...

Misco Jobs

Resume #3154

CONTACT INFORMATION:
View contact information...

RESUME

CERTIFICATIONS AND QUALIFICATIONS:
NACE Coatings Inspector (#2491)
Level II ANSI-N45.2.6 (ASTM-D-4537) Nuclear Coatings Inspection
U.S. ARMY CORPS OF ENGINEERS Construction Supervisor / Quality Management
SSPC Supervisor/Competent Person for Deleading of Industrial Structures
Environmental/ Safety and Health (120 hours)
30 years experience in the coatings and linings industry and the equipment used in application

EXPERIENCE:
E.E. DOEER & ASSOC. 4/03 to present
Coatings Inspector at Missouri Dept. of Transportation – Bridges

WILLBROS ENGINEERS 06/02 to 4/03
Safety Coordinator (3 sites) at Explorer Pipeline Expansion Project – Pipeline/Tanks

INSPECTION SERVICES INC 08/00 to 6/02
Quality Control Manager at Vought Aircraft Industries - Factory
FBE Inspector for Canyon Express Project on the Castoro 10 Laybarge - Pipeline
Coatings Inspector for onshore and offshore projects - Offshore

KENNEDY COATINGS INSPECTION 10/99 to 8/00
Coatings Inspector -B/P Amoco-Shutdown, coating austenitic stainless steel to prevent (CCSC) - Refinery

KTA-TATOR, INC (Safety/Coatings and Linings Inspection) 06/97 to 10/99
Tennessee Department of Transportation – Bridge
Indiana American Water Company – Water Treatment
Pate Engineers – Tanks / Pipeline
Marathon Oil Company – Chemical / Refinery
Public Service Electric & Gas – Elevated Tower
Tatman and Lee – Tanks / Pipeline
Parkhill, Smith and Cooper – Elevated Tower

AMERON INTERNATIONAL (CMS DEPT.) 05/95 to 06/97
Assisting Field Service Department in the Houston area
Field Service Rep. at Trinity Industries in Greenville, PA and Mt. Orab, OH - Factory
Project Manager on maintenance program at Atlas Processing in Shreveport, LA – Refinery

WILLIAMS POWER CORPORATION 08/93 to 05/95
Compliance Engineer / Safety Rep. At Tennessee Valley Authority – Fossil
Job Superintendent at New Brunswick Nuclear Plant – Nuclear
Job Superintendent at Corps of Engineers, Morrilton, AR – Lock and Dam

AMERON INTERNATIONAL (CMS DEPT.) 05/91 TO 08/93
I.N.E.L. Nuclear facility – Nuclear
Inspection / Management on fuel tanks at Amoco Refinery – Tanks, Pipeline
Inspection / Management of maintenance program on offshore platforms - Offshore

1972 to 05/91 Apprentice to job superintendent with various coatings contractors in Houston area.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1951 to 2000 of 6635)

Go to Search Parameters...

Brief Description

Maintenance and calibration of field instrument, DCS and PLC installation, configuration, commissioning, and maintenance.

I am mechanical engineer with 14 years experience in preventive & predictive maintenance for reciprocating & rotating machinery in the oil & gas industry. I have computer & software skills for office and maintenance applications. I have BS Mechanical Engineer degree from the UIS University.

Over eighteen years in QA/QC, inservice and T/A inspection, inspection planning and refinery reliability tasks.

Multi disciplinary engineer

Marine Engineer with 30+ years experience in operating, designing, installing and commissioning marine systems

3 year Diploma holder in electrical Engineering 13 years total experience as senior Industrial Electrician in which 3 years are in LPG plant. Ready to work anywhere.

Thirteen years of continuous experience as Planning Engineer spread out in the field of Project Management, Engineering, Fabrication, Construction, Commissioning and Plant Maintenance for projects such as Oil & Gas Offshore Platforms, FPSO, Petrochemical, Desalination and Power Plants.

I am a well-organized and reliable Instrument Engineer with over 25 years experience within the Petrochemical, Nuclear, and Power & Water Industries. My project involvement has included offshore & onshore maintenance, inspection, construction, and commissioning at technical and supervisory levels.

Over 20 years supervision, construction, design – Pharma., Petro/chem, Micro and Food. Self starter, hands on in fabrication/construction supervision, trouble shooting, scheduling/conflict resolution of different trades on complex plant construction.

Mechanical Engineer (MOS) Refinery and Petrochemical Equipment Degree. Level II SNT-TC-1A for Magnetic Particle, Dye Penetrant, xRay examination, Project Manager course in U.K.

Presently working as a CONTRACTS ENGINEER for the last several years with a Multinational Company in the Gulf. Seeking higher and prospective opportunities.

Development and Implementation of MMI Scada Systems ,Developing Logic and Control Systems, Commissioning and Start-up Assistance, Supervising Electrical and Instrumentation Departments, Design and Engineering Automated Control Systems

-20 years of North American & international Petroleum engineering experience, including reservoir simulation. Strong technical skill ,ability to communicate effectively, -updated several large simulation models, and developed new reservoir simulation models for multiple oil fields.

I am a graduate from a Safety Engineering Technology Program. I have twenty-two years experience in the health & safety field in the areas of mining, oil & gas, manufacturing, and construction industries.

Thirty years experience in the construction, fabrication, and pipeline industry. Have expertise in a variety of areas from years of hands on experience, to Forman, Superintendent, and Management. QC/QA, Safety, Project Management, Consultancy, (Economic/Mechanical), job efficiency, Materials.

Extensive electronics/instrumentation installation, troubleshooting and repair of subsea control systems. This was analog/digital to the component level; this was accomplished on systems controls and computer monitoring , and subsea modules to the board level repair.

Application for the post of Electrical Supervisor

25 years of experience in Production, Drilling, training and administration and costs control

Structural Engineer, PE, with 14 years experience. My experience is in the following industries: Heavy Construction, Petroleum/Oil and Gas, Pre-engineered metal buildings, Mining

To work Overseas

PIPEMILLS,PLATE MILLS, EXPEDITOR, VENDOR INSPECTOR, TECHNICAL WRITER ON PIPE SPECIFICATIONS QA/QC CO-ORDINATOR,

30 years experience in all types of heavy industry, the equipment used, predominately in coatings and linings. Experienced in all phases of construction projects. Supervised numerous larger projects, overseen and implemented safety, inspection.

Working knowledge of marine diesel propulsions and electricity generation systems. Familiar with mighty power engines. Knowledge of support systems such as fuel centrifuges, air compressors, pumps, hydraulics, refrigeration, heating, and air conditioning.

Provide diverse engineering technical support for research, reporting and production. Work history includes oil and gas production, oil and gas debt and equity capital transactions, and oilfield equipment.

I have worked both on and offshore for 30 years. I have also worked in shipyards, including writing commissioning procedures, commissioning equipment and writing preventative maintenance procedures. I have current offshore survival and medical certificates. I am immediately available.

Multi-disciplined sub sea engineer, extensive experience gained in the design, selection, operation, maintenance and acceptance testing of well control equipment, working in a variety of different environments to the standards specified by the manufacturer, drilling contractor and operator

I have been in the offshore industry for more than 23 years, my recent experience has been with new build drilling rigs as Commissioning Manager; Team Leader Mechanical and Piping Systems; Project Superintendent. Previous 14 years experience was with the British merchant navy as an engineer officer.

Seeking a full time position to actively contribute to the technical achievements of a company in the oil and gas industry

QA/QC Welding Inspector

Resume for the job in maintenance or operation field.

More than 26 years experience directly involved in the offshore oil and gas industry. Experienced in detailed structural engineering, fabrication and installation of offshore platform topsides including floatover installations and Floating Production Platforms.

SCADA Specialist

25 years in Oil& Gas, Power and Petro-Chemical Industries. I am a multi disciplined QA/QC professional. Safety oriented, team oriented, quality oriented, and production oriented. I have organizational and managerial capabilities. I would look forward to an opportunity to serve your interests.

Eleven years of experience in design, development, testing and implementation of Application Software.

BS in civil engineering and MS in structural engineering. Have worked as a civil/structural design engineer for 14 years in petrochemical plants design and construction. Skilled with MS office, Staad-Pro & Risa3d. Familiar with AutoCAD. Contract only.

Senior Networking Engineer

Casing design and selection, cement slurry design, BHA design, hydraulics calculations, BHA design, drill bits, drilling fluids design, solids control equipment, drill strings, well control methods, surface equipment, directional drilling. Schlumberger Drilling Office Software & TDAS.

Did M.Tech in Petroleum Engineering and B.Sc. Engineering in Mechanical discipline.

5 year experiance in rotating equipment field. Experiance includes service, manufaturing, engineering, sales and marketing

Extensive use of Landmark’s Drilling & Completions Engineering Software. Well-verse with data management applications like OpenWells, DIMS and Data Analyzer. Knowledge of engineering applications like WellPlan, Compass, StressCheck, CasingSeat & Insite and Insite Anywhere. Job scope includes design

Working in siemes power generation having 11 year exp.

Broad experience in mid-stream and upstream oil and gas production and facilities. B.S. double major Petroleum and Chemical Engineering. M.S. Environmental Engineering

To seek a challenging position that will utilize my expertise in the field of Process instrumentation. And have an opportunity to work with highly professional group of people, hence to achieve personal growth, satisfaction & welfare of our organization.

Hi, my name is Pervez Iqbal, I am a mechanical engineer with 7+ year experience in my work. I am searching a job for myself in the US. My work status is permanent resident/green card.Currently I am living in California, but willing to relocate near my job area . I have work experience in CAD/CAM de

Material Selection,Welding Procedure Specification(WPS), Non Destructive Test Procedure(NDT)

Mechanical Engineer in the Department for Research and Development of Oilfield Equipment

Experienced and Professional I&C Engineer

More than 7 years seismic acquisition, processing, Interpretation and reservoir Geophysics experiences with several major seismic companies and seismic processing contractor company.

Possess Degree in Engineering and more than 10 years of Professional Experience in Project Planning and Controls through various project phases such as Front End Design, Detail Design, Procurement, Manufacturing and Construction for various Oil & Gas, Petrochemicals & Chemical projects.

I am a Petrophycisist with 8 years of experience

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 [ 40 ] 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out