Resume - NACE INTERNATIONAL Recognised CIP III Qualified Coating Inspector

Misco Jobs

Resume #31932

CONTACT INFORMATION:
View contact information...

QUALIFICATIONS

ACADEMIC
- University Degree
- Bachelor of Science (B.Sc.) with Chemistry, University of Burdwan - India

Technical

Coating & Painting
- NACE INTERNATIONAL, USA.
- CIP Session I, Session II & Level 2 (New Version) Qualified Coatings Inspector
NACE International, Houston, Texas, U.S.

Passive Fire Protection
- CHARTEK
- QC Inspector for Chartek Fireproofing Systems
- International Coatings Ltd, Essex, U.K.

Quality
- IQA/IRCA Registered Training Scheme
- Documentation, Quality Management System & ISO 9000
- Internal & Lead Auditor

Health, Safety & Environment

Safety
- Safety Instruction Course for SHIP REPAIR MANAGER
- Occupational Safety and Health (Training & Promotion) Centre, Singapore

- Safety Committee Member Training
- Singapore National Employers Federation, Singapore

HSE
-Identifying Environmental Aspects & Impacts
- Risk Assessment
- EQS Asia, Singapore

SKILLS
Development Training
- Projecting Your Professional Image
- ST College, Singapore

EMPLOYMENT HISTORY

May 2005 to present ƒç SMOE Pte Ltd, A SembCorp Utilities Company, Singapore, SEA
QA/QC Senior Engineer - Lead Corrosion Protection

December 2004 to May 2005 ƒç Hyundai Engineering Construction Co., Ltd., in Tripoli, Libya.
QA/QC Engineer - Corrosion Protection

October 2003 to November 2005 ƒç Consortium of Technimont SpA, Milan, Italy & Saipem s.a. - Paris, France
QA/QC Engineer - Lead Corrosion Protection

December 1997 to October 2003 ƒç Punj Lloyd Limited, New Delhi, India
QA/QC Engineer - Coating & Insulation

January 1992 to December 1997
M/s. B. B. Engineering, Durgapur, West Bengal, India
Senior Executive - Workshop

WORK EXPERIENCE SUMMARY

INTERNATIONAL EXPOSURES:

On-going International Projects with my present organisation in Singapore:

* Bohai FPSO Project, China. Owner / Client - Conoco Phillips.
Works: Construction of Top Side Modules & Integration - consists of Construction, Hydro test and Commissioning of Process Piping along with Structural Steel, Insulation, Coating, Passive Fire Protection, erection and installation of Equipments, electrical & instrumentation works.

* Third Transmission Pipeline Project, Bongkot, Thailand. Owner - PTT. Client / Consultant - Bechtel International. Consortium - SMOE Pte., Ltd., - Singapore & Saipem s.a. - France. Works: Construction of Living Quarters & Process Modules for Offshore Platform System - consists of Construction, Hydro test and Commissioning of Process Piping along with Structural Steel, Insulation, Coating, Passive Fire Protection, erection and installation of Equipments, electrical & instrumentation works.

* Erha FPSO Project - Nigeria Deep Sea Water Project. Owner - Exxon Mobil (ESSO Exploration & Production Nigeria Ltd.). Prime Contractor - Saipem s.a., Paris, France. Works: Construction of Top Side Modules & Integration - consists of Construction, Hydro test and Commissioning of Process Piping along with Structural Steel, Insulation, Coating, Passive Fire Protection, erection and installation of Equipments, electrical & instrumentation works.

Previous International Projects with my previous organizations:

* Western Libya Gas Project, Onshore Mediterranean Sea, Tripoli, Libya. Owner - AgipGas BV Eni. Consortium - Snamprogetti SpA, Italy & Hyundai Engineering Construction Co., Ltd., Seoul, South Korea. Works: Construction of Onshore Gas Process Terminal - consists of Construction, Hydro test and Commissioning of Process Piping, Storage Tanks, LNG Tanks along with Structural Steel, Insulation, Coating, Passive Fire Protection, erection and installation of Equipments, electrical & instrumentation works.

* Shell LNG Receiving Port & Terminal Project, Hazira, Surat, India. Owner - Shell International. Consortium - Technimont SpA, Milan, Italy & Saipem s.a. - Paris, France. Works: Construction of LNG receiving Port & Terminal including Cryogenic Tanks & Piping, Structural Steel, Civil, Instrumentation & Electrical Works, Equipments erection & Installation.

* MSPF - Once through Hydro Cracker Unit (OHCU) Project. Client - IOCL Panipat Refinery. Prime Contractor - Daelim Industrial Company Ltd., Seoul, Korea. Consultant - EIL. Works: Construction, Hydro test and Commissioning of Unit Piping along with Structural Steel, and Equipments.

WORK EXPERIENCE SUMMARY

INTERNATIONAL EXPOSURES:
Previous International Projects with my previous organizations:

* FUJAIRAH WATER & POWER PROJECT (Pipelines), Abu Dhabi (UAE). Client - UAE Offsets Group. Prime Contractor - Technip, GmbH, Germany. Consultant - Fichtner. TPIA - Bureau Varitas. Works: Construction of 9 nos. Water Storage Tanks.

* SULPHUR RECOVERY UNIT (SRU) & VIS BREAKER UNIT (VBU). Client - Chennai Petrochemical Corporation Limited (CPCL), India. Consultant - EIL. Prime Contractor - Petrofac International, USA. Works: Construction, Hydro test and Commissioning of Unit Piping and Storage Tanks Including Structural Steel, Civil Works, Instrumentation, Equipments erection and related Piping.

* SULPHUR RECOVERY UNIT (SRU) & VIS BREAKER UNIT (VBU). Client - Chennai Petrochemical Corporation Limited (CPCL), India. Consultant - EIL. Prime Contractor - Petrofac International, USA. Works: Construction, Hydro test & Commissioning of Unit Piping & Storage Tanks Including Structural Steel, Civil Works, Instrumentation, Equipments erection& related Piping.

* SULPHUR RECOVERY UNIT (SRU), OFF SITES & UTILITIES PROJECT. Client - IOCL Guwahati Refinery, India. Consultant - EIL. Prime Contractor -Siritec Nigi sPa, Itally. Works: Construction, Hydro test and Commissioning of Unit Piping and Storage Tanks including Structural Steel, Civil Works, Instrumentation, Equipments erection and related Piping.

* DABHOL LNG POWER PROJECT. Client - ENRON. Consultant - Bechtel. Prime Contacctor - Lintech / Skanska International. Works: Construction of 03 nos. 160,000 Cu.m. capacity LNG Cryogenic Storage Tanks and Regassification Unit, part of 2184 MW capacity distinguished power project.

* MSPF - Once through Hydro Cracker Unit (OHCU) Project. Client - IOCL Mathura Refinery. Consultant - EIL. Works: Construction, Hydro test and Commissioning of Unit Piping along with Structural Steel, Civil Works, Instrumentation and Equipments erection.

* LPG CRYOGENIC PAKAGE. Client - Reliance Petroleum Ltd., Jamnagar Refinery. Consultant - Noevel LGA / DNV. Works: Construction of 01 no. LPG Cryogenic Storage Tank and related piping works.

* Marine Tank Farm Project. Client - Reliance Petroleum Ltd. Jamnagar Refinery. Consultant - Bax Counsel. Project management - Bechtel India Limited, S.A. Works: 23 nos. of Crude Oil Storage Tanks and related piping works.

WORK EXPERIENCE SUMMARY

- 13 years of total experience in protective coatings
- New construction onshore & offshore, Oil & Gas, Refineries, Steel & Power Plants projects
- Maintenance contracts onshore and offshore locations
- Shutdown contracts onshore and offshore locations
- Special skills in
- Coating, Painting & Linings
- Passive Fire Protection
- Thermal Sprayed Aluminium

CORE RESPONSIBILITIES

Project Management

- Title, function, responsibilities and authorities
- Key contacts for co-ordination
- Scope of work, project contractual requirements such as milestones and completion schedule
- Design engineering, fabrication and construction sequence
- Review specification (including all amendments and pertinent appendices), applicable codes and standards
- Conflicting requirements, project field change requests, technical deviations and engineering change notices
- Pre-job conference records or minutes of meetings
- Attend ad-hoc clarification meetings with client
- Review tender documents for paint supply subcontract
- Attend tender clarification meetings with paint vendors
- Review paint vendor priced & un-priced (technical) documents
- Perform audit at paint vendor facility to assess capabilities
- Submit assessment report & recommendations on potential paint vendors
- Attend technical & commercial negotiation meetings with paint vendors
- Attend paint vendor finalization meeting
- Review paint vendor documents
- Project history or track record
- Project specific site technical representatives resume
- Key personnel - title, function, responsibilities and authorities
- Daily report or log
- Specific field tests & reports
- Laboratory test reports
- Review tender documents for blasting & painting subcontract
- Attend tender clarification meetings with subcontractors
- Review subcontractor priced & un-priced (technical) documents
- Perform audit at subcontractor facility to assess execution capabilities
- Submit assessment report & recommendations on potential subcontractor
- Attend technical & commercial negotiation meetings with subcontractor
- Attend subcontractor finalization meeting
- Review subcontractor documents
- Project history or track record
- Project organization chart
- Resume of key personnel
- Key personnel - title, function, responsibilities and authorities
- Manpower histogram
- List of plant, machinery, equipment, tools, inspection instruments & site office facility
- Procedures
- Inspection test plan
- Daily progress report
- Daily inspection report
- Review company procedures and inspection test plan
- Ensure effective utilization of subcontractor resources
- Monitor subcontractor performance
- Monitor project schedule planned VS actual
- Identify areas in critical path, cause and effect
- Establish, implement & monitor recovery plan
- Attend quality surveillance with client
- Conduct co-ordination meeting
- Conduct weekly meeting with subcontractor
- Review & verify subcontractor monthly valuation
- Advise contracts department on variation orders & claim
- Constant co-ordination with project management team

CORE RESPONSIBILITIES (Continued)
GENERAL OVERVIEW

- Cause and effect of corrosion
- Protection, maintenance and prevention of corrosion
- Design and material selection
- Anti-corrosion protective coatings
- Surface preparation methods
- Mechanical surface preparation during pre-fabrication and onsite portable centrifugal blasting
- Open air blast cleaning
- Vacuum blast cleaning
- Hydroblast cleaning
- Wet blast cleaning
- Hand and power tool cleaning
- General uses of coatings / linings / wrappings
- Painting
- Galvanizing
- Thermal Sprayed Aluminium
- Passive Fire Protection
- High performance internal linings
- Tape wrapping
- Cement linings
- Self leveling compounds
- Anti-skid deck coatings
- Type of coatings commonly used and the major components of coatings
- General physical and chemical properties of the generic types of coatings and application process of coatings / linings
- Calibration of inspection and test instruments
- Using coatings inspection and test instruments
- Defects affecting performance of the applied coatings
- Causes for most common coating defects
- Inspection of defects on coated surface
- Acceptable and unacceptable defects
- Identification of defects and implementation of repair procedure
- Premature failure analysis of coatings
- Protective coating inspection standards for field and shop applications
- Internal spin blasting and spray painting methods
- Plural spray method
- Hot spray method
- Documentation

Enforcement and verification of work performed in accordance with specification, manufacturer recommendations and applicator coating procedure.

- Witness applicator qualification or trade test and paint system qualification
- Measure ambient conditions, surface temperature and air quality requirements
- Inspect location and suitability of access for areas of work
- Inspect type of blasting equipment and tools to be used
- Inspect type and size of blasting media
- Inspect metal surface imperfections / defects
- Test indication of oil or water in compressed air
- Test conductimetric analysis of water-soluble ionic contamination of blasting media
- Inspect pre-cleaning or solvent cleaning of surface
- Measure compressed air pressure
- Inspect degree of cleanliness required
- Measure surface profile of blast cleaned surface

- Assess surface cleanliness of blast cleaned surface
- Assess surface cleanliness soluble salt contamination on blast cleaned surface
- Inspect coating material storage conditions
- Inspect type of coating material to be used
- Monitor thinning, mixing, induction time and pot life
- Inspect type of coating application equipment and tools
- Monitor application method, type and pattern
- Measure wet film thickness by notch gages
- Non-destructive measurement of dry film thickness of non-magnetic coatings applied to ferrous surface
- Non-destructive measurement of dry film thickness of non-conductive coatings applied to non-ferrous surface
- Destructive measurement of dry film thickness of coatings
- Monitor re-coating and final curing schedules
- Test MEK resistance of Inorganic Zinc Rich Primers by solvent rub
- Test film hardness
- Measure the adhesion of coatings applied
- Test pull-off strength of coatings applied
- Test discontinuity (holidays or pinholes) of nonconductive coatings and linings

Health, Safety & Environment

- Understand local and international legal and HSE regulations
- Project specific HSE requirements
- Witness tool box briefing, safety surveillance & safety audit
- Attend monthly management safety committee meeting
- Conduct project safety co-ordination committee meeting (Permit to work system)

Administration

- Delegation and distribution of responsibilities
- Employee recruitment
- Employee training needs & wellness programs
- Employee appraisal
- Constant interaction, counseling & team building session

OBJECTIVE
Obtain a position that will allow the utilization of my skills tempered by over fifteen years of professional experience in Coatings and, ultimately, to become a long term, highly valued employee of a successful organization.

PRESENT REMUNERATION
USD 3000 per month for 10 Hours work per day.
Over Time paid @ 1.5 for work after 10 Hours (Monday to Saturday).
Over Time paid @ 2.0 for work on Sunday & holidays.

PERKS
Fully furnished family accommodation + Free Transportation + Bonus + AWS + 30 Days paid annual leave with to & fro family air tickets.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 6001 to 6050 of 6432)

Go to Search Parameters...

Brief Description

Familiar with International Codes and Standards such as AWS, ASME, API, ASTM, BS, ASNT, JIS and good knowledge in welding processes like GTAW, SMAW, SAW, FCAW/GMAW with specialization in aluminium / titanium welding process and procedure.

Planning Engineer (Mechanical), having 7 years experience in Industrial construction and Shutdown Maintenance Planning/Scheduling activities in the various Oil&Gas, Petrochemical, Refinery projects in middle east. Currently working as Planning Engineer with a MNC based in Doha, Qatar.

Porficient in use of Trimble SPS instruments and rovers. I have done road surveying, underground utilities, The current project I am working on is under budget and ahead of schedule

I'm hardworking,trustworthy, quiet but can communicate well, can handle stressfull situations and most of all a very good team player.

Bilingual Electronic Engineer with some experience in pattern recognition and ultrasonic sensors, seeking an entry level position. Background in networks and telecommunication systems theory. Experience in Analog and digital circuit simulation, Visual Basic and C language programming.

NACE INTERNATIONAL Recognised CIP III Qualified Coating Inspector

Pipeline / HDD Engineer with 7 years global experience

A computer literate with proficience in the use of various product management softwares to monitor and control stock movement. Ability to work without supervision and also to work under pressure. An innovative person who always explores better ways of doing things positively and team player

6 Years experience in PVT oil and condensate sampling, analysis, simulation, calculation, interpretation, flow assurance and EOR studies, Extensive field and laboratory experience; operations and supervisory.

Geologist

Qualifications: Diploma of Engineering, Engineering Tradesperson Mechanical (Trade Papers)

I am able to work independently as well as work in a team. I have high qualifications and achievement throughout my studies period. I believe I can make a difference with my skills and qualifications in your company.

Over six years experience as a professional geologist with training in petroleum geology, mining geology and geochemistry

Mechanical Supervisor / Project Manager

With 20yrs of my experience, I have developed a sound background in infrastructure civil project and management, methods and procedures, which includes Commercial & Residential buildings, Roads, bridges, Tunneling, Dams, Environmental Remediation and Extensive Construction Quality Assurance/Quality

I'm a P.Geo with a B.Sc. Hons in Geological Sciences and 5 years experience (dominantly exploration), varying from core logging to project planning. I set high standards for myself and I work extremely hard to complete anything I set out to do. I'm organized and I pride myself on perfection.

To secure a full time Mechanical Engineering position in which I will utilize my technical and interpersonal skills to further the company and myself.

Trained in handling Emerson Process Management (formerly Fisher-Rosemount Systems) DeltaV Digital Control Systems (DCS) with Foundation Fieldbus field instruments at Emerson Process Management main Headquarters in Austin, Texas U.S.A. and Asia Pacific main Headquarters in Pandan Crescent, Singapore.

More than two years of experience in inspection works as a QA/QC Welding Inspector. Extensive experience gained in major onshore/offshore oil and gas construction projects, covering all methods of structural and piping fabrication, erection and inspection (Modules, CPP Decks/Topsides, Jacket & LQ).

young and energetic graduate with professional experience in Land Surveying

I am a Civil Engineering Graduate from NED University, Karachi, Pakistan and hold a Master's degree in Environmental Engineering from USA. I have extensive professional consulting experience spanning over 10 years of EHS management and controls, involving Due Diligence reviews and audits, Environme

PLC, HMI, C/C++, PHP, JAVA, mySQL, microcontroller, Embedded, Firmware,DSP

I am doing Masters Graduation from Anna University, Chennai India and is eager for a position from which I will gain valuable experience in the industry. I will finish the course by April 30th

CMIOSH - Sr. Industrial Hygienist : Expertise in writing & implementing OH Procedures, conducting HSE Training, Inspection, Audits, Risk & Industrial hygiene Exposure Assessment & Monitoring etc. Able to work with little guidance, hold good inter-personal relations & transparent communication skill.

Fire Prevention, Job Safety Analysis, Hazard Analysis, TOR,

A geophysical graduate with 8 years marine survey experience, coupled to business, project and people management skills. Currently working for an international consultancy, integrating geophysical and geotechnical surveys into engineering projects worldwide.

I have 5 years experience in power station operation and maintenance Gas turbine(GE LM 6000 PC&PD),steam turbine(Mistubishi 300MW)

Projects Management / Technology Consultant / Business Development & Management of Information Systems

I'm a Strategic Marketer for Oil Pipe line for Baosteel Iron and Steel in Indonesia, and currently trying to flap my wings abroad for experience and better salary

Experienced project manager - Oil & Gas/Offshore

HND holder in Mechanical Engineering Technology. Have Experience in Offshore Equipment Maintenance and Services. Pipeline design and Construction. Design of Machine elements and Petroleum Drilling and Production.

Have international experience in project planning/scheduling, cost estimating/control, and project procurement.Hold advanced education and research background in project management and international construction management, and proficient knowledge and skills in applying P3, PRISM, and CONVERO.

Mechanical Diploma Holder. OBJECTIVE: A career in technical sector that provides me lot of opportunities to learn, which continuously throws us new challenges & gives me opportunity to work with best.

My skills include operation of a voriaty of heavy equipment in the areas of enviromental, paving, dirt and utility work

Specialist in Security, Safety and Risk management

Detailed experience within the Barnett Shale, including title research, abstracting, lease composition, surface and mineral acquisition.

I am an exploration geologist ,4year degree,of 3 years old field experience in gold exploration,grassroot to target delination including project management

HSE ENGINEER

With a Chemical Engineering degree and 5 years experience in Oil & Gas, Water Treatment, Quality Control and Project Management, I possess strong analytical, quantitative, communication, management and problem–solving skills. My initial objective is to build on these skills, gaining full chartered

Experienced in Project and Mechanical Engineering and pursuing Reservoir Engineering

Female post graduate, MCA,seeking suitable post in kuwait ,having knowledge in vb, vb.net, java, c, c++, sql sever, access, html.

Senior Process Engineer with 13 years of Experience in Petrochemical and LNG process

8 Years extensive experience in QA/QC inc: India and overseas.

Specialist in Telecom looking for a job in CIS

To obtain a 2nd class welder/boilermaker position that utilises my vast experience as a welder and my experience with steel fabrication.]

Project Management Professional (PMP) Project Controls Engineer - International Oil & Gas Industry Construction Project Management experience in Cost Estimating, Planning & Scheduling and Quantity Surveying.

HSE Mechanical Engineer. Quality, Safety and Environmental issues skills.

Document Control

Seeking Chemist or Laboratory Technician Position-will relocate

Electronics, electronics of power, electromagnetic compatibility and signal processing , NDT, reliability, maintenance, instrumentation, sensors

First Prev 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 [ 121 ] 122 123 124 125 126 127 128 129 Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out