Resume - More than 14 years process & project engineer experience in Oil & Gas and Oil Re...

Misco Jobs

Resume #3239

CONTACT INFORMATION:
View contact information...

Curriculum Vitae

PERSONAL DETAILS

Qualification: Master of Eng. (Chem.), RMIT University, Melbourne, 1997

Master of Eng. (Chemical), East China University of Chemical Technology, Shanghai, P.R.China, 1985

Bachelor of Engineering. (Chemical), East China University of Chemical Technology, Shanghai, P.R.China, 1982

KEY AREA OF EXPERIENCE

¡¤ Petroleum refinery processes design and unit operation
¡¤ Off shore and onshore gas plant processes design
¡¤ Chemical and petrochemical plant processes design and operation

Process tools (Software)

¡¤ Hysis, static and dynamic simulation
¡¤ Aspen
¡¤ HTRI
¡¤ PSFF
¡¤ PipeSim
¡¤ Flarenet and FlareSim

RELEVANT EMPLOYMENT HISTORY

March 2003 ¨C Current
BP-SINOPEC JV 769 ZhangYang Road, Pudong New Area, Shanghai, P.R. China

Senior Process Engineer

SSEC Project ¨C To development of an ethylene cracker and derivatives complex in Shanghai, China
Duty: (1) HAZOP team member of the OSBL part of the project, which including flare system, water supply and treatment, steam supply and power generation system, condensate recovery and treatment system, cooling water systems, waster water systems, plant and instrument air system, nitrogen and hydrogen system, feed and product tankage, refrigeration storage, liquid loading and unloading system, solids handling and storage, firewater systems, distribution systems and buildings, roads, drains and other civil requirements etc.
(2) HAZOP team member for Acrylonitrile and Acetonitrile plant flare system

July 2002 ¨C Feb 2003
Shedden-Clough JV Level 1, 355 Spencer St. Melbourne

Senior Process Engineer

Origin BassGas project ¨C To develop Yolla gas field, extract, transport, process and deliver 67 TJ/day of sales gas approximately 150 km offshore from Victorian Coast.
Duty: (1) Hot oil system design including reboilers hot oil loop control, pumping and PSVs design
(2) Condensate and LPG storage and loadout system design including bullets sizing and truck loadout system
(3) Flare drums and stack sizing etc

May. 2000 ¨C July 2002
Shedden Uhde Level 2, 355 Spencer St. Melbourne

Senior Process Engineer

Basell Polypropylent Plant Expansion ¨C A catalyst system upgrade includes the provision of new propane-propylene splitter and propylene storage facility, together with a brown-fields upgrade of the existing polypropylene plant.
Duty: (1) FEED

Shell Hydrogen De-sulfurization project ¨CEPC Phase. The process consist of a 6000 t/d reactor, HP and LP separators, heat exchangers, utilities, flare and water treating system.
Duty: (1) Engineering change register
(2) Detailed design including re-sizing all vessels, separators and heat exchangers.
(3) Fire case study for reactors and major heat exchangers
(4) P&ID reconstruction and HAZOP follow up study

BP Nam Con Sun offshore platform & onshore gas plant de-bottlenecking ¨CDesign review for BP Nam Con Son Gas Project. The project is to build an offshore platform, a 2-phase sub-sea pipeline and an onshore treatment plant.
Duty: (1) Offshore process design review and de-bottlenecking including examining all equipment and generate pressure drop curve plotted against gas flow to determine its ultimate capacity.
(2) Sub-sea pipe line capacity check and pipeline modeling.
(3) Engineering change register

Esso West King Fish Offshore Platform¨C Review the flare system, blowdown system and fire case scenario
Duty: (1) Scenario analysis, flare system and blowdown system capacity check.

Mastal Coode Island Chemical storage facility- To build a chemicals storage, ship load and unload facility
Duty: (1) FEED

April 2000 ¨C May. 2000
Liberty Risk Service Australia, Rear 773 Glenferrie Road, Hawthorn, Vic 3122

Senior Process Engineer
Duty: (1) HAZOP for ESSO Longford Gas Plant.

April. 1999 ¨C April 2000
Brown & Root AOC, Level 3, 441 St. Kilda Rd, Melbourne 3004

Senior Process Engineer

ESSO GP2/3 retrospective HAZOP Closeout
Duty (1) HAZOP

ESSO LIP project ¨C Process plant upgrade
Duty (1) FEED

Shell OP2 Project ¨C a major cracker debottleneck project at shell Chemical¡¯s olefins plant
Duty (1) FEED

Sep. 1996 ¨CApril.1999
Nufarm Limited, 103-105 Pipe Rd, Laverton Nth, Vic 3026

Project Engineer

Ester plant extension Project ¨C To upgrade batch operation to semi-continuous operation
Clean caustic project ¨C To produce food grade caustic
Brine washing project ¨C Washing process upgrade
HCL Synthesis Project ¨C To produce HCL from recovered H2 and CL2 gas
HYPO upgrade Project ¨C Process upgrade
Upgrade Effluent Plant ¨C Reduce effluent discharge and improve the effluent quality

Duty: (1) Application of process engineering expertise in the design, specification, construction, startup, and qualification of process equipment and process unit operations for the site.
(2) Responsibilities include technical planning, verification and validation analyses, cost estimates, price quotes and risk analyses, and supportability and effectiveness analyses for process systems improvements.
(3)To liaise and coordinate with contractor in preparation of all the necessary documentation and drawing

Process Engineer
Duty: (1) Commissioning HCl Acidification Plant
(2) Commissioning Na 2,4-D Spry Dryer Plant

Plant Engineer
Duty: Engineering responsible for Herbicide Plant, HCL Acidification Plant, Spray Dryer Plant and Ester Plant.

Feb.1985 - Mar.1991
Shanghai Oil Refinery, Shanghai, P.R. China

Project and process Engineer
Involved in the following project
¡¤ Furfural Solvent Extraction Plant Project
¡¤ 3 Million Ton/Year No. 3 A/V Distillation Plant Project
¡¤ 400000 Ton/Year Visbreaking Plant Project
¡¤ LPG treatment and separation Plant Project
¡¤ Evaluation of F.C.C. Plant Catalyst Cycle System Performance
¡¤ Evaluating Catalysts Performance for Reformer Plant
¡¤ Evaluating No.1 and No.2 A/V Distillation Plant Performance for Processing Different Sources of Petroleum.

EDUCATION (Tertiary)

Feb.1994- Mar. 1996 Master of Engineering (Second Master Degree)
Department of Chemical and Metallurgical Engineering
RMIT, Melbourne 3001

Master degree thesis: (Refinery Project)
Reduction of Benzene in Gasoline

Sep.1982-Mar.1985 Master of Engineering (First Master Degree)
Department of Energy Sources,
East China University of Chemical Technology, Shanghai

Master degree thesis: (Refinery Project)
Study of the properties of zeolites for the alkylation of benzene with long-chain olefins at high pressures and temperatures.

Sep.1978-Jul.1982 Bachelor of Engineering
Dept. of Energy Sources,
East China University of Chemical Technology, Shanghai

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1901 to 1950 of 7055)

Go to Search Parameters...

Brief Description

B.Tech from IITK, 6 yr exp. in piping stress on CAESAR II, Triflex. Review of lines on PDMS & Smart review. worked with bechtel, chemtex, Citec(Finland)

A Logging Analyst in the Syrian Petroleum Company. A Petrophysicist in Al Furat Petroleum Company, responsible for many fields for all petrophysical operations and formation evaluations. Petrophysics section head, Wireline logging, perforation and core analysis contract holder.

Extensive Wonderware software experience including Industrial Application Server and System Platform products. Expert industrial PC skills. Extensive experience with Microsoft Virtual Server and Terminal Server products.

I have involved in petrochemical, oil/gas, and heavy industrial projects. I have strong academic achievements, excellent interpersonal skills, and positive attitude, Commitment and desire to perform engineering design. I am also exceptionally well organized and highly motivated and able to pull toge

To obtain a challenging position in your organization where my technical and management skills can be effectively honed and utilized and to gain practical experience in the realm of Civil/Structural Engineering.

Over Eight years of multidisciplinary Civil Engineering experience

Instrumentation & Maintenance industrial Engineer

Substation primary design engineer for high voltage substation

DEEE with 4 years Triconex Knowledge

I had passed bachelors degree in safety and fire engineering.Passed NEBOSH international certificate in occupational Safety and health.

I have 13 years in piping design and drafting field for Oil and gas industry

I possess hands on experience in developing EMS (ISO 14001) and OHSMS (OHSAS 18001) procedures in line with International best practices, performing HSE audits, leading EIA and Risk Assessment study teams, assisting in development of emergency response / contingency plans e.t.c,

Vast experience of planning, Management reporting, Refinery Economics,Vast experience in Petroleum Refining. Confident and result-oriented, Able to analyze and apply problem solving and decision-making techniques to achieve desired objectives within target deadlines.

16+ years experience HVAC Engineer with intension to work in Oil and Gas field

Sr. Projejct Document Controller-Exp of 12 years in Oil & Gas/Power Project Industry

Thirteen (13) years of extensive and diversified experience in managing and leading variety of upstream Oil & Gas handling, Chemical & Petrochemical Projects.

About 16 yrs of experience in the field of Civil Engineering Design, Construction & Inspection and Document Control for turn over (Piping Test Packages, Punch list & etc) & dbase management using MS Access program.

Electrical Intrument & Control System

Lead Mechanical Engineer, 17 years of experience in preparation of Specification/ Material Requisition/ Proposal/ Scope of Work; Design Basis and calculations, Technical & Cost Evaluation; Vendor Drawing Review, Static, Rotating and Material Handling Equipment and Mechanical Packages

Senior Piping Designer with 20+ years experience. AutoCAD, AutoPlant, Excel, Access, Word, Outlook.

Wireline supervisor or wireline consultant

Geoscientist with experience of working in a multidisciplinary team in a major E and P company. Experienced in Seismic modelling and Interpretation, and reservoir modelling. Holds an M.Sc in Petroleum Geoscience.

Process Engineer with over 11 years oil and gas engineering background. Design experience of Liquefied Natural Gas import terminals and process simulation experience of base load liquefaction trains.

Structural engineer with over 14 years experience in EPC projects (grass root and revamp) in refineries, petrochemical plants, spinning mill, cement plant & other industrial units.

OBJECTIVE: To utilize my experience in manufacturing and construction. Using various software programs, and engineering disciplines, (24,000hrs) Of AUTOCAD experience.

More than 14 years process & project engineer experience in Oil & Gas and Oil Refinery.

CAREER OBJECTIVE A suitable, challenging, and rewarding position in Petroleum Engineering.

Working Experiences as Senior Process Engineer from 1992 - 2003 in LNG/ LPG Plant of PT. Badak NGL in Bontang East Kalimantan Indonesia. I have been working for PT. Badak NGL over 20 years. Previous Job experienced in PT. Badak as Senior Production Planning Engineer from 1983 - 1991.

ERP Consultant (functional and technical) : MFG-PRO and Progress, Axapta, Movex, SAP Software Development Project Manager : Visual Basic, Oracle, Access, SQL-Server

I have multilingual skills and am fluent at Russian, Turkish and good atdrilling

Proactive and skilled professional with a solid supervisory background and experience developed on projects in Venezuela

Good Capability and ability to get goal the project with safety, quality, planning and costing

Using FEM packages (COSMOS, ALGOR) to analyze structures and components (Stress, Stiffness, Fatigue, etc). Document drafting and review (Calculations, P&IDs, MITPs, etc.).

More than 23 years experience as Sr. rotating techn/foreman in the refinery, responsible for the repair, troubleshooting, modification, preventive and predictive maint. of all rotating equipt.; ensure safety, planning, scheduling of personnels, preparations of tools and spare parts.

Stress Analysis of critical lines connected to static as well as rotating equipments like exchangers, columns, reactors, pumps, compressors. Super high pressure steam lines, lines connected to ‘cold box’ (Cryogenic lines), and expansion loop sizing for rack lines, analysis of pressure safety valves

A highly experienced MBA professional with exceptional interpersonal and communication skills and an external extensive background in the following broad-based competencies: Procurement/Supply Chain Management Strategic Planning; Contract Negotiation; Business Development

Wire line logging: done a special six months course on wire line loggingIn which I Have studied all the logs their specifications, uses, tools, interpretation etc, like gamma ray, sp log sonic log, neutron porosity logResistivity & conductivity log, density &photo electric factor log etc.

Crude oil storage tank construction experience as per API 650/653

i am looking for dimensional survey engineer job. i have complite Diploma in Marine & Offshore Technology.i have been work for Keppel fels Shipyard 3yers. Dyna-Mac shipyard 1.5years. now working for Norce offshore in Indonesia for DLB Projct.

I Mr. Noel C. Atienza 12 almost 12 years experience in oil and gas as a senior mechanical technician, including as a machinery supervisor. I'm permanent residence in singapore

a great job seeker of electrical field

Pipeline Integrity Engineer / Project Engineer / Design Engineer

Technical Assistant to Reservoir/Production/Petroleum Engineering.

BSc Chemical Engineer Having Six Year experience in Petrochemical Industry

Currently working in SNC LAVALIN ENGG INDIA LTD. Mumbai and deputed to SNC LAVALIN EUROPE B.V. BRANCH to Shaybah, saudi arabia as a PDS ADMINISTRATOR. My job profile is related to Piping Engineering and PDS(PLANT DESIGN SOFTWARE),RIS (Relational Interface

Controls and Instrumentation Engineer / ESD-Triconex & DeltaV SIS/ 6+year Exp

Provide structural engineering, construction management, real estate due diligence and expert witness services.

Innovative Professional with 26 years of progressive experience in engineering design, maintenance planning and management, including 16 years in the Oil/Gas industry.

Over 18 years experience in construction, installation and mechanical assemblies, heavy

My background has 15 years of Heavy chemicals, Dyes, Petrochemicals process safety and Refinery Construction HSE experience in India as well as foreign countries Recently acquired NEBOSH Qualification

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 [ 39 ] 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out