Resume - Extensive electronics/instrumentation installation, troubleshooting and repair o...

Misco Jobs

Resume #3298

CONTACT INFORMATION:
View contact information...

OBJECTIVE
To use my vibration, electronics and work experience in industrial/process controls in a service-related position in the petroleum industry
PROFESSIONAL SKILLS
* Intel based computer systems; PC/XT through the Pentium classes
* Operation systems Windows 95/98/2000, Windows NT on the administrative level
* MS Office 97 Professional with Bookshelf, Orcad, Universal Diagnostics and various proprietary diagnostic software. Onspec and IsaGraf Graphical Interface for industrial plant control systems.
* ISO 9000 procedures as they apply to Quality Control and Field Service
* Setup of GE Fanuc and Genius Series PLC using triple redundant distributive network
* MMI interface with Windows and Windows NT software with PLC architecture using structured text for data acquisition and instrument control
* The use of Hart Protocol and integration software PC10 with Foxboro smart transmitters for process plant control; experience with Rosemount controls in the same capacity.
* OEM training on 505/555 Seimens PLC and programming software
* Microsoft training in Windows NT system administration
EXPERIENCE
2002-PRESENT Kavearner Oilfield Products Houston, TX
SUBSEA ELECTRONICS CONTROLS TECHNICIAN
* Analog and digital repair of Subsea (deepwater) modules to the component level.
* Power, solenoid, modem, switching, 4-20ma,multiplexer, addressing and microprocessor boards.
* Testing of fiber optic communication links, modems and control boards.
* Testing of the above assemblies to prescribed test standards and procedures.
1999 - 2002 International Electric Co. Houston, TX
SCR/CONTROL SYSTEMS TECHNICIAN
* Installation, troubleshooting and repair of SCR control systems to the component level.
* Complete installations of Power Distribution and Motor Control Systems on both land and offshore.
* Participated in numerous retrofitting of the above-mentioned equipment.
1996 - 1999 PDS Designers Houston, TX
ELECTRONICS/INSTRUMENTATION TECHNICIAN
* Temporary assignments with several Oilfield Service Companies in the Houston area
* Process Control Systems Technician: Total process system instruments/controls and display software. Also Network System Administrator.
* Commissioning of plant electronics, instrumentation control systems
* Extensive adaptive tuning of PID loops for startups and to improve performance
* Electromechanical, electronics and instrumentation; prototyping, assembly, system integration. Modifications and troubleshooting of Subsea Blowout Prevention System (deepwater). Direct involvement with engineer group responsible for development and production
* Extensive fabrication of industrial cables and connectors
* Environmental testing of the communications systems used as part of MWD control systems
Pneumatic/hydraulic assembly and testing. Calibration of electronics control consoles.
* Extensive testing and calibration of flow, level, conductivity, pressure and density equipment
* Utilization of Windows 95/00, Windows NT and Microsoft Office in systems operations and support

DONALD W. HARRIS 713-748-8461
1997 - 1998 Varco/Shaffer Houston, TX
SUBSEA EQUIPMENT FIELD SERVICE REPRESENTATIVE
* Assisted in implementing the first ultra-deepwater multiple blowout prevention control system
* Installation and service of motion compensation and riser control systems
* Installation and repair of electronic panels and control used with the above mentioned systems
* Extensive loop calibration, reconfiguring, analysis and repair of PID loop controls/instruments
* Repair of hydraulic, pneumatic and electromechanical components of all systems and BOPs
* Extensive travel internationally to provide these services
1991 - 1996 Metrix Instrument Co. Houston, TX
FIELD SERVICE SPECIALIST
* Precision calibration and testing of vibration monitoring equipment, RTD, 4-20ma current monitors/transmitters, micro controllers and other related analytical instrumentation
* Analog and digital troubleshooting of the above to the component level at the factory lab and in a field service capacity. PLCs were Allen-Bradley, Honeywell, Solar (Caterpillar) and Bentley-Nevada
* Restructured field service department procedures in reports, tests and calibration certification, database management and information recovery to obtain ISO 9000 certification
* Assisted engineering in the research, development and redesign of present and future products; from both manufacturing and field service aspects
* Startup of gas compression facilities throughout the United States and the world
* Installed the turbine monitoring system at the Pennzoil Caspian Compressor Station at Baku, Azerbaijan
1989 - 1991 Stewart & Stevenson Houston, TX
CONTROL PANEL WIREMAN
* Circuitry wiring of 50 Megawatt portable cogeneration units
* Promoted to control panel department: Performed electrical/electronic assembly of MCM/DCS, cables, wiring harness, motor control, switchgear, Woodward speed controls, Fisher Yogagawa, ITT and Rosemount instruments
* All assembly and wiring done from engineering layout drawings, schematics and wiring diagrams to meet all National Electrical Code and Military Standards
1986 - 1989 TNT Computer Service Houston, TX
CNC MACHINE TECHNICAN
* Provided repair and preventative maintenance services for company clients in Texas and Louisiana
* Troubleshooting of electronic controls and retrofit involving Mazak 6/10 series, GE Fanuc (Genius Series), Allen-Bradley, Texas Microsystems and Xycom controllers
1976 - 1986 Houston Builders and Remodelers Houston, TX
OWNER/OPERATOR
* Provided complete construction service contracts for both commercial and residential building contractors in the Houston/Galveston areas
1974 - 1987 Weatherford/Lamb Corporation Houston, TX

OFFSHORE WELL SERVICE TECHNICIAN
• Member of a dedicated crew to provide casing, centralization, pipe cleaning and pressure testing on offshore rigs throughout the Gulf of Mexico
•
EDUCATION
1985 - 1987 NEC - Bryman Campus Houston, TX
* AASEET I Electronics awarded Cum Laude with a cumulative 4.0 GPA
* Vice President of Sigma Epsilon Theta

MILITARY U.S. Corps of Engineers
* Trained in the repair of gas, diesel and turbine drive portable generation systems to depot level overhaul. Participated in the only firing of (4) Pershing missiles; this was a full Battalion mobilization.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1901 to 1950 of 6432)

Go to Search Parameters...

Brief Description

I am mechanical engineer with 14 years experience in preventive & predictive maintenance for reciprocating & rotating machinery in the oil & gas industry. I have computer & software skills for office and maintenance applications. I have BS Mechanical Engineer degree from the UIS University.

Over eighteen years in QA/QC, inservice and T/A inspection, inspection planning and refinery reliability tasks.

Multi disciplinary engineer

Marine Engineer with 30+ years experience in operating, designing, installing and commissioning marine systems

3 year Diploma holder in electrical Engineering 13 years total experience as senior Industrial Electrician in which 3 years are in LPG plant. Ready to work anywhere.

Thirteen years of continuous experience as Planning Engineer spread out in the field of Project Management, Engineering, Fabrication, Construction, Commissioning and Plant Maintenance for projects such as Oil & Gas Offshore Platforms, FPSO, Petrochemical, Desalination and Power Plants.

I am a well-organized and reliable Instrument Engineer with over 25 years experience within the Petrochemical, Nuclear, and Power & Water Industries. My project involvement has included offshore & onshore maintenance, inspection, construction, and commissioning at technical and supervisory levels.

Over 20 years supervision, construction, design – Pharma., Petro/chem, Micro and Food. Self starter, hands on in fabrication/construction supervision, trouble shooting, scheduling/conflict resolution of different trades on complex plant construction.

Mechanical Engineer (MOS) Refinery and Petrochemical Equipment Degree. Level II SNT-TC-1A for Magnetic Particle, Dye Penetrant, xRay examination, Project Manager course in U.K.

Presently working as a CONTRACTS ENGINEER for the last several years with a Multinational Company in the Gulf. Seeking higher and prospective opportunities.

Development and Implementation of MMI Scada Systems ,Developing Logic and Control Systems, Commissioning and Start-up Assistance, Supervising Electrical and Instrumentation Departments, Design and Engineering Automated Control Systems

-20 years of North American & international Petroleum engineering experience, including reservoir simulation. Strong technical skill ,ability to communicate effectively, -updated several large simulation models, and developed new reservoir simulation models for multiple oil fields.

I am a graduate from a Safety Engineering Technology Program. I have twenty-two years experience in the health & safety field in the areas of mining, oil & gas, manufacturing, and construction industries.

Thirty years experience in the construction, fabrication, and pipeline industry. Have expertise in a variety of areas from years of hands on experience, to Forman, Superintendent, and Management. QC/QA, Safety, Project Management, Consultancy, (Economic/Mechanical), job efficiency, Materials.

Extensive electronics/instrumentation installation, troubleshooting and repair of subsea control systems. This was analog/digital to the component level; this was accomplished on systems controls and computer monitoring , and subsea modules to the board level repair.

Application for the post of Electrical Supervisor

25 years of experience in Production, Drilling, training and administration and costs control

Structural Engineer, PE, with 14 years experience. My experience is in the following industries: Heavy Construction, Petroleum/Oil and Gas, Pre-engineered metal buildings, Mining

To work Overseas

PIPEMILLS,PLATE MILLS, EXPEDITOR, VENDOR INSPECTOR, TECHNICAL WRITER ON PIPE SPECIFICATIONS QA/QC CO-ORDINATOR,

30 years experience in all types of heavy industry, the equipment used, predominately in coatings and linings. Experienced in all phases of construction projects. Supervised numerous larger projects, overseen and implemented safety, inspection.

Working knowledge of marine diesel propulsions and electricity generation systems. Familiar with mighty power engines. Knowledge of support systems such as fuel centrifuges, air compressors, pumps, hydraulics, refrigeration, heating, and air conditioning.

Provide diverse engineering technical support for research, reporting and production. Work history includes oil and gas production, oil and gas debt and equity capital transactions, and oilfield equipment.

I have worked both on and offshore for 30 years. I have also worked in shipyards, including writing commissioning procedures, commissioning equipment and writing preventative maintenance procedures. I have current offshore survival and medical certificates. I am immediately available.

Multi-disciplined sub sea engineer, extensive experience gained in the design, selection, operation, maintenance and acceptance testing of well control equipment, working in a variety of different environments to the standards specified by the manufacturer, drilling contractor and operator

I have been in the offshore industry for more than 23 years, my recent experience has been with new build drilling rigs as Commissioning Manager; Team Leader Mechanical and Piping Systems; Project Superintendent. Previous 14 years experience was with the British merchant navy as an engineer officer.

Seeking a full time position to actively contribute to the technical achievements of a company in the oil and gas industry

QA/QC Welding Inspector

Resume for the job in maintenance or operation field.

More than 26 years experience directly involved in the offshore oil and gas industry. Experienced in detailed structural engineering, fabrication and installation of offshore platform topsides including floatover installations and Floating Production Platforms.

SCADA Specialist

25 years in Oil& Gas, Power and Petro-Chemical Industries. I am a multi disciplined QA/QC professional. Safety oriented, team oriented, quality oriented, and production oriented. I have organizational and managerial capabilities. I would look forward to an opportunity to serve your interests.

Eleven years of experience in design, development, testing and implementation of Application Software.

BS in civil engineering and MS in structural engineering. Have worked as a civil/structural design engineer for 14 years in petrochemical plants design and construction. Skilled with MS office, Staad-Pro & Risa3d. Familiar with AutoCAD. Contract only.

Senior Networking Engineer

Casing design and selection, cement slurry design, BHA design, hydraulics calculations, BHA design, drill bits, drilling fluids design, solids control equipment, drill strings, well control methods, surface equipment, directional drilling. Schlumberger Drilling Office Software & TDAS.

Did M.Tech in Petroleum Engineering and B.Sc. Engineering in Mechanical discipline.

5 year experiance in rotating equipment field. Experiance includes service, manufaturing, engineering, sales and marketing

Working in siemes power generation having 11 year exp.

Broad experience in mid-stream and upstream oil and gas production and facilities. B.S. double major Petroleum and Chemical Engineering. M.S. Environmental Engineering

To seek a challenging position that will utilize my expertise in the field of Process instrumentation. And have an opportunity to work with highly professional group of people, hence to achieve personal growth, satisfaction & welfare of our organization.

Hi, my name is Pervez Iqbal, I am a mechanical engineer with 7+ year experience in my work. I am searching a job for myself in the US. My work status is permanent resident/green card.Currently I am living in California, but willing to relocate near my job area . I have work experience in CAD/CAM de

Material Selection,Welding Procedure Specification(WPS), Non Destructive Test Procedure(NDT)

Mechanical Engineer in the Department for Research and Development of Oilfield Equipment

Experienced and Professional I&C Engineer

More than 7 years seismic acquisition, processing, Interpretation and reservoir Geophysics experiences with several major seismic companies and seismic processing contractor company.

Possess Degree in Engineering and more than 10 years of Professional Experience in Project Planning and Controls through various project phases such as Front End Design, Detail Design, Procurement, Manufacturing and Construction for various Oil & Gas, Petrochemicals & Chemical projects.

I am a Petrophycisist with 8 years of experience

Multi-disciple project engineer covering, electrical, instrument, mechanical, piping work etc. Gas Turbine & High Voltage Power installation work. DCS work. Contract Management / Planning / Cost/ Commissioning, Training, Maintenance,. Vendor Inspection. Contract estimation work, QA/QC/QS.

Senior Operations Technician with over 25 years of experience as control room panel man/ field operator of LNG Plant, Jetty coordinator LNG. High pressure hydro cracker (isomax), hydrogen plant, CDU, Vacuum distillation and Visbreaker units. National Diploma in Technology Chemical Engineering

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 [ 39 ] 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out