Misco Jobs
|
Go to Job Seeker's Center »»
|
«« previous resume
Resume #33424
next resume »»
CONTACT INFORMATION:
View contact information...
QUALIFICATIONS
- 20+ years of industry experience
- Six Sigma Black Belt, IADC Well Control Certification, Rig Inspection Training.
- 4 years operational supervisory experience. (Libya)
- 7 years as Site Cavern Engineer in a major storage focility.
- Gaslift design, installation, diagnostic and repair experience.
- Design and operational experience relating to gathering systems: test and inlet separation, desalters, degassing and dehydration facilities, detailed inspection programs of pipelines and vessels, multiphase flow study of field gathering systems. Hazop review.
- Workover design and execution.
- Extensive experience dealing with all aspects of sweet and sour, high pressure oil and gas operations.
- Reserves and reservoir engineering: well testing, deliverability and reserve calculations relating to both exploratory and production environments.
- Reservoir engineering and simulations studies relating to reserves, field development and enhanced oil recovery projects.
- Appraisal experience relating to acquisitions.
- Canadian and British Citizenship (wife - Cambodian)
PROFESSION
Professional Engineer
B.Sc. Petroleum Engineering 1979 with honours
University of Tulsa, Oklahoma
Petroleum Technologist, BCIT 1978
EMPLOYMENT HISTORY
DynMcDermott Petroleum Operations Company April, 1998 to Present
Site Cavern Engineer – West Hackberry
Supervisors: John Farquhar/Steve lowery - Cavern Integrity and Operations Managers
- Monitor pressure performance of petroleum storage caverns. Report on all pressure trends and anomalous readings.
- Workover program design, execution of coiled tubing sandlift operations, cement and acid jobs with general rig support activities as needed.
- Acts as liaison between the site and New Orleans Engineering concerning site technical problems, Hazard Operations Analysis (Hazop).
- Adaptation of Digital control system output for use as Cavern Integrity Test data gathering system.
QUANTUM TECHNOLOGY CORP. August, 1994 to March, 1998
Chief Engineer
Supervisor: Dr. Calvin Winter
- Design, assembly, testing and installation of liquid helium and nitrogen cryogenic systems for a world-wide market. Marketing and customer support.
Independent Contractor (Quantum Technology) April, 1993 to August 1994
- Assembled, installed and repaired cryogenic equipment. Assignments in Australia, Italy, Isreal, Philippines, Switzerland and Spain.
ZUEITINA OIL CO. (Libya) March, 1989 to March, 1993
Senior Production Foreman, Intisar 103D
Production Supervisor
Supervisor: Art Hrupchuk
- Train, schedule and supervise 61 Libyan and expatriate personnel involved with the day-to-day operations of five oil fields in the 103D area. Of primary importance was the day to day operations of large retrograde condensate miscible flood project.
- Train Libyan personnel in the supervision, scheduling and the testing of all production wells. Redesigned the gaslift, separation and metering systems to optimise field production and minimise manpower requirements.
- Design and supervise the construction and installation of a large high pressure separator vessel for emergency vessel replacement.
- Schedule and conduct internal and external inspections of vessels pipelines and storage facilities utilising various non-destructive testing techniques.
- Supervise the replacement and overhaul of all gaslift valves and subsurface safety equipment.
- Maintain and repair all production and water injection facilities.
- Schedule, supervise and conduct bottom hole pressure surveys and wellbore surveys.
- Schedule and conduct well casing and vessel integrity tests.
- Monitor and maintain crude oil storage facilities.
- Supervise bulk automotive fuel storage and handling facilities.
PHH PETROLEUM CONSULTANTS March, 1987 to October, 1988
Senior Consultant - Reservoir Simulation
- Prepared company marketing materials, maintained contacts with client base.
- Prepared and executed petroleum reservoir simulation studies.
- Assisted in the preparation of Indonesian acquisition evaluations.
BOW VALLEY INDUSTRIES December, 1984 to March, 1987
Senior Reservoir Engineer
Supervisor: Ian Herring
- Performed reservoir engineering studies relating to the development and reserves for Western Canadian, Indonesian and Middle East properties.
- Acted as a technical liaison between BVI, its field offices and operating partners involving properties in the North Sea, Middle East, and USA.
HUDSON'S BAY OIL AND GAS COMPANY LTD./DOME PETROLEUM LTD. June, 1980 to December, 1984
Supervisor: Dr. George Besserer, Manager, Enhanced Oil Recovery
Senior Project Engineer - Exploitation, Enhanced Oil Recovery,
- Conducted reservoir simulation study of the Sturgeon Lake miscible flood project.
Senior Field Engineer - Fox Creek District, Kaybob 1 and 2 gas and oil fields.
A deep, hot, sour condensate cycling scheme with heavy scale production and severe corrosion problems.
- Conducted routine BHP surveys, monitored field production.
- Designed and installed the phase 1 gaslift facilities in the field.
- Designed and conducted tubing scale removal programs.
- Produced full life production forecasts and budgets.
- Conducted 3 phase modelling study of the gathering system.
Production Engineer - Edson and Pine Creek areas.
- A deep, sour gas field with on site dehydration of gas streams
View contact information...
«« previous resume
next resume »»
Search Results (Resumes 1051 to 1100 of 7054)
Go to Search Parameters...
Brief Description
Many years of work and academic experinces with the AutoCAD software and some classes in the ESRI -GIS software.
NAME:JOHN GOODDY
Master Electrician \ Instrument Tech \ PLC Programmer
Responsible for implementing and execution of water well drilling/work over programs given by Clients. Ordering materials required for Well Construction. Organizing and controlling the rig crew. Monitoring the daily drilling activity. Communicating with Client and Company.
MEng is a Staff Petrophysicist with 14 years experience specialising in petrophysical evaluation and 4 years in wireline/LWD operations. Career history includes working currently as a petrophysicist to support logging and coring operations, and performing petrophysical evaluations
Currently working as Senior Corrosion Engineer. Experienced in routine and non-routine corrosion mitigation and control activities, Topside inspection.
I am a postgratuate with 15 years experience in Oil/Gas - design of HV and LV from 132kV, 66kV, 33kV, 22kV, 11kV, 6.6kV & 440V level
Static Equipment Mechanical Engineer
Simulation studies, preparation of detail feasibility reports, FEED package, detail engineering, HAZOP, licensor selection, debottlenecking of existing units etc.
A highly creative, goal-oriented process design engineer with strong communication and presentation skills. Demonstrated experience in design, simulation and engineering calculations. A team player and computer professional.
Senior Petroleum Engineer with Six Sigma Master Master Black Belt Proviciency. Best for Oil Company who need to IMPROVE its PRODUCTIVITY. High production, safe, with lower cost.
Gas engineer, pipeline engineer, gas distribution, transportation, metering reducing gas, midstream/downstream gas, gas facilities.
Full hands-on maintenance, Working under extreme conditions
M.Sc. Petroleum Engineer with excellent experience in Petrophysics- Specialist in Geolog Software_highly self motivated, Oriented and hard working, able to work in multidecipline, willing to travel internationally on mission
Linux/Storage Admin
Piping detail design isometric MTO and layout detailng etc
Highly skilled engineer with over 10 years experience undertaking electrical engineering projects as well as having an understanding of industrial automation
Currently authorized to work indefinitely in the United States (Green card holder). Have more than 6yrs work experience in the oil industry. Worked as a Petroleum/Reservoir engineer and well versed in EOR and secondary recovery techniques and use of commercial reservoir simulators
Currently working as a Civil/Structural Engineer in WORLEYPARSONS (ABU DHABI – UAE).
I am a fully qualified Electrical Engineer to HNC level, having served my apprenticeship with a multi-national company within the UK. I enjoy excellent health and am competent, dependable and hardworking. I am equally comfortable working on a solo project or as part of a team.
Mechanical Engineer with 12 +years expereince with experience in Front end Engineering and Detailed (FEED) Engineering, Project Management and supervision industrial projects in Petrochemical/Oil & Gas. Presently i am working in a Engineering Consulting Company in Saudi Arabia.
Having total 10 years of exp. in HSE-Safety field in Petroleum/oil/gas Project, steel, automobile plant and project at Oman , UAE, Qatar & India
Over 10 years experience in shipping industry mainly in estimation, project planning, building, design and purchase.
SENIOR PIPING / MECANICAL DESIGNER
Geotechnical Field Rep
•Extensive exposure to complex clastic environments. •Pick up formation boundaries and lithology changes; determine casing point.
A highly skilled Chemist Engineer with over 24 years experience in Oil and Gas Industry in Romania and abroad. QUALIFICATIONS: technical advisor, training supervisor, commissioning & start up engineer , shift supervisor
I have 20+ years experience in fire, safety, risk, design and testing. Of this 14 years were spent overseas.
Senior process engineer O&G; 20yrs exp. FEED, basic & detailed eng, operations. Troubleshooting, P&ID, C&E, risk assessment, HAZOP. Units: compression, dehydration, oil/water separation, cond. stabilisation, hydrates, gas/water injection. Computer skills: Hysis, ProII, Pipephase, HTRI, Flarenet.
Senior Mud Engineer as employee with Halliburton – Baroid at Port Harcourt Nigeria, working offshore Guinea Gulf in deep water Rigs.
NAval architect
Motivated and capable in team or independent work setting , Strong problem solving abilities, Mechanical aptitude, Receptive to feedback, Attention to detail with strong sense of urgency and precision , Honest and hard worker, Quick learner, Supervisory skills (managed up to 60 people),
QA/QC Inspection Engineer
I am a Petrophysicist with 8 years experience in a major independant energy company. I have worked in exploration and field development. I have a masters degree in petroleum geology and undergraduate degree in geology. I have well developed communication and interpersonal skills.
A result-oriented Instrument/Control Systems Engineer offering over 11 years of experience in the Petrochemical, Oil, Gas and Refinery industry handling operations and maintenance.
Varied geographical experience and knowledge of most mud systems used by mud companies in the industry and all type of cement slurries.
Repair, maintenance and troubleshooting onshore and offshore units (ONCC, OLU), Generators, Compressors (WAC-SS22, WAC-QB), Hydraulic units (EHPS, DAPS, OSU,OSLC), HVAC. Hook – up, setup and installation offshore & onshore equipments Corresponding with Customers and Suppliers I have
Reservoir or Production Engineer
Mechanical Engineer, with +30 yrs experience in Quality Assurance Management and Engineering Management, executed more than 10 projects in Fertilizer, Refinery and Petrochemical industry
Petroleum engineer with 20+ years of diverse experience. 4 years of multi cultural supervisory experience in North Africa. References available on request.
Process design for some of the largest Oil and Gas production systems (offshore/onshore) and pipelines (including Jamnagar Loni LPG) in India have been done directly by me in Engineers India (EIL) or withands on supervision (complete Process Design responsibility from concept to comm. of project).
Petroleum Engineer with various and quantifiable exposure in production and reservoir engineering roles. Been involved in both onshore and offshore work environment, mature and new field development, heavy/light oil and gas wells.
Static equipment like vessel, tank and heat exchanger
BS Ceramic and Cement Technology, my experience is working in the field of Refractories and insulation, i have about 12 years field experience.
corrosion and cathodic protection
Electrical Engineer with sea /offshore experience, familiar with automation, DP courses,PLC control,
Ph.D in Safety Engineering, looking simililar job either consultant, or mining, mechanical engineer or any safety related job
See resume body
Planning / Scheduling, Project engineering, Subcontracts administration, Primavera, Open Plan,MS Office,Pipeline design/construction/replacement
Objective: I would like to pursue a challenging position in the oil and gas industry working as a development geologist developing oil and gas fields along the Texas Gulf Coast.
First
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
[ 22 ]
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
Next
Last
Seach Parameters
Change search parameters...
CATEGORIES:
Engineering/Technicians;
INDUSTRIES:
Petroleum/Oil/Gas;
Change search parameters...
Keywords:
(e.g. mining engineer)
Find results with:
ANY of the words
ALL of the words
WITHOUT the words
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to
Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.
How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".
More Frequenly Asked Questions...
Employer's Center
»
Employers Home
»
Feedback
»
Help
»
Post Jobs
»
Edit/Delete Jobs
»
Search Resumes
»
Resumes By Email
»
My Account
»
Log In
»
Log Out
©1999-2009 Misco Jobs. All rights reserved. Contact:
support@miscojobs.com