Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #33514 next resume »»
CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS
* 1998 - 2005 Ph.D. Electrical Engineering, "A Proposed Rational Fuzzy Model Implemented by Neural Networks Using Hybrid Genetic Learning Algorithms for Modeling and Identification," Alexandria University, faculty of engineering, Alexandria, Egypt.

* 1994 ¡V 1998 M.Sc. Electrical Engineering, "Multiprocessor Application A Developed Multicomputer System for Parallel Processing and Application on Process Identification and Autotuning". Alexandria University, faculty of engineering, Alexandria, Egypt.

* 1989 - 1994 B.Sc. Electrical Engineering, communication and Electro-physical section, with grade Very good with degree of honor, Alexandria University, faculty of engineering, Alexandria, Egypt.

PUBLICATION
* "NSNFRM: construction of neuro TSK new fuzzy reasoning model using hybrid genetic ¡V least squares algorithm" published in the Proc. of the 21st national radio science conference (21st NRSC' 2004), Mar. 16-18, 2004, Cairo, Egypt.
* "Modeling and identification of Nonlinear Systems Using Genetically Constructed Neuro New Fuzzy Reasoning Model" published in the Proc. of the 7th IEEE international conference on intelligent engineering systems, INES 2003, Mar. 4-6, 2003, Assiut-Luxer, Egypt.
* "GNNFRM: Genetically constructed Neuro new fuzzy reasoning Model", published in the Proc. of the eighteenth national radio science conference (18th NRSC' 2001), Mar. 27-29, 2001 Mansoura, Egypt.

* "NNFRM: Neuro-New Fuzzy Reasoning Model Interpreted as General Case of Fuzzy Reasoning Model"; published in the Proc. of the seventeenth national radio science conference (17th NRSC' 2000), Feb. 22-24,2000 Minufiya, Egypt.

* "Effective implementation of a parallel software on a multiprocessor system"; published in the Proc. Of the fifteenth national radio science conference (15th NRSC' 1998), Feb. 24-26, 1998, Helwan, Cairo, Egypt.

TRAINING COURSES
* "High Performance PM Implementation / Maintenance-3755" Honeywell Automation college at Phoenix, AR USA 29/11/1999 through 8/12/1999.
* "Programmable Logic Controller SIMATIC S5 -Basic course" SIEMENS Cairo 10/11/1996 to 14/11/1996.
* "Programmable Logic Controller SIMATIC S5 -Advanced course "SIEMENS Cairo 17/11/1996 to 21/11/1996.

Part ¡V time Employment
„Ð 2007- Present Part time supervisor for master degree in the field of automatic fault detection and isolation for instrumentation and process in Alexandria University, faculty of engineering, Alexandria, Egypt.
„Ð 2005- Part time lecture in faculty of engineering, Tanta University, Tanta, Egypt Preparing courses, delivering lectures and supervising projects.
„Ð 2002- Present reviewer for the IEEE Transaction on Systems, Man, and Cybernetics.
Employment History and Responsibilities
„Ð 1995 - Present
Alexandria petroleum company, Po. Box. 3 Elmex, Alexandria Egypt. Fax: 202 4451605 Tel.:202 4452100 Alexandria Egypt.
* 2004- Present Section Head Engineer Instrumentation and control Department.

Responsibilities and Duties
− Maintain Distributed Control System DCS Honeywell TPS 3000, PLC System, ESD, and local control panels for burners and compressors.
− Supervise engineers and technicians maintenance teams in day to day troubleshooting work.
− Provides technical and troubleshooting support to all system users.
− Manages systems backup and recovery.
− Supervise the corrective and preventive maintenance schedules for the plant.
− Prepare spare parts for: DCS, PLC System & Field equipments.
− Monitors distributed control systems performance and maintain, modify and tune of hardware, operating systems or network systems to improve system efficiency and performance and ensure maximum availability of systems.
− Installation and inspection of Hydrogen Recycle Local panel compressor ALLEN BRADLY MICRO LOGIX 500.
− Preparing and delivering training courses for systems users. Ensures that all relevant staff training is up to date with system changes.
− Preparing and delivering training courses for engineers and technicians in other companies in all subjects of instrumentation and control systems.

* 1999-2004 Senior Instrumentation and control engineer, Instrumentation and control Department.

Responsibilities and Duties
− Maintain Distributed Control System DCS Honeywell TPS 3000, PLC System, ESD, and local control panels for burners and compressors.
− Supervise 5 technicians and 2 engineers in maintaining field equipments: (Pressure, Level, Temperature & Flow Transmitters, Control Valves & P/I Transducers).
− Perform the corrective and preventive maintenance Schedules for the plant.
− Advice the spare parts for: DCS, PLC System & Field equipments.
− Responsible for modification of PLC program and configuration necessary in 40 Ton Boiler revamp in lube oil project in Alexandria Petroleum Company.
− Supervisor for Installation, Inspection, and Start-Up of spent oil project in Alexandria Petroleum Company including:
o Installation and Inspection for Honeywell TDC3000x system.
o Installation, Inspection, and Start-Up for two hydrogen compressor.
o Installation, Inspection, and Start-Up for Burner.
o Communicating with and supervising the work of different local an international contractors and 3rd parties.
o Making all the testing and necessary changes in the shut down system SIMATIC 115H, including loop test, cause and effect check, and making the necessary changes to the PLC Program to fulfill the specification and cause and effect.
o Instructor in Alexandria Petroleum Company Training Center. Preparing courses and delivering lectures for engineers and technicians in Alexandria Petroleum Company, AMOC, ANRPC, MEDOR, MEDOM and other smaller companies. The subjects of courses and training programs are: Process Control, PID Controller, PID tuning, Control algorithms and strategies, Vibration Measurement, Compressor Control, Instrumentation theory & Pressure, Level, Temperature, Flow Transmitters, Control Valves & P/I Transducers and Installation, Calibration & Trouble Shooting.
* 1996-1997 First Instrumentation and control engineer, Instrumentation and control Department.

Responsibilities and Duties
− Supervisor for the construction, Installation, Inspection, Commissioning, Start-Up and maintenance of Bitumen project in Alexandria Petroleum Company including:
o Instrument air compressor with SIMATIC 95F PLC control, o Process air compressor with SIMATIC 95F PLC control, Burner with SIMATIC 95F PLC control, o Three Packaging machines that uses two SIMATIC 115H and one SIMATIC 155H PLCs, o control room with 4 control panels, Honeywell loop controller, shut down system which use SIMATIC 115H PLC, o Motor control center which uses speed controller for controlling the direction and speed of a large numbers of motors including induction and servo motors.
o Communicating with and supervising the work of different local an international contractors and 3rd parties.

* 1995-1996 Shift Instrumentation and control engineer, Instrumentation and control Department.

Responsibilities and Duties
− Performing the corrective and preventive maintenance schedules for DCS, PLC, field and local panel Instruments.
− Maintenance and trouble shooting of DCS: Rosemount, Honeywell 3000 and Honeywell 2000 DCS,
− Maintenance and trouble shooting of several PLCs and shut down Systems.
− Maintenance and trouble shooting for boilers.
− Maintenance and trouble shooting for furnaces.
− Maintenance and trouble shooting for gas compressors.
Experiences

* Expert in process control systems theory, applications and technology knowledge and its application in the refining/petrochemical industry.
* Process identification techniques.
* Highly capable in dynamic process modeling.
* DCS configuration and maintenance (Rosemount, Honeywell 2000 and Honeywell 3000)
* PLC SIMATIC and Allen Bradley programming, installation, testing, and maintenance.
* Developing Cause and Effect Charts.
* Field control panels designing, operating and maintenance
* Preparing preventive maintenance schedules for field instrumentation, DCS, PLCs, and Local panels.
* Instrumentation calibration, maintenance, and installation.
* Motor speed control.
* Familiar with Standards and Codes like ISA, NEC, API, and NEMA
* Supervising a team of engineers and technicians for regular and corrective maintenance of field instrumentation, DCS, PLCs, and Local panels.
* Leading team of engineers and technicians for. Installation, Inspection, Commissioning, and maintenance.
* Operations knowledge and a good ability to work with board operators.
* Instrumentation and control systems engineering; develop P&ID's, control philosophy and alarm/emergency/shutdown and safety instrumentation systems.
* Construction support and start-up assistance.
Other Experiences and Skills
* Professional computer user.
* Professional programming knowledge.
* Computer programming languages such as VB, C++, VC++, HTML, etc.
* Computer packages such as Microsoft office, Matlab, Mathcad,..etc.
* Operating systems Dos, windows 98, windows XP, etc.
* Knowledge of UNIX.
* Maintenance Management software System.
* Operations knowledge and a good ability to work with board operators.
* Very structured and tenacious problem solver. I can take diverse technical issues and bring them to resolution
* Innovative.
* Out-of-the-Box Thinking.
* Coaching/Training skills.
* Leadership Skills.
* Committed to continuous and never end self improvement.

LANGUAGES
* Arabic and English

HOBBIES
* Reading, Listening to audio courses, and walking.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 1 to 50 of 6790)Go to Search Parameters...
Brief Description
Free! Don Westacott Chief Petrophysicist reservoir characterization and development of conventioanl and unconventional oil and gas reservoirs within US domestic and global sedimentary basins.
Free! Petroleum Engineer with 12 years of progressive experience gained from active involvement in all phases of oil and gas exploration and production(Deep Water and Onshore. Vast experience in Well and Reservoir Surveillance, Integrated Production Systems Modeling, Production Engineering and Technology
Free! Planning / Scheduling,Project engineering,Subcontracts administration,Primavera, Open Plan,MS Office,Pipeline design/construction/replacement
Free! I am an experienced exploration consultant, advisor, manager, educator and research scientist. I have extensive experience in exploration play, prospect and basin risk analysis and in designing exploration strategy and organizational structure
Free! Experienced Supervisor in the Electric Submersible Pump Industry
Free! As an ambitious, inquisitive, self motivated engineer, I have been working as a workover & completion engineer since 2004. Cementing, acidizing, fishing, drilling, offshore gas well completion, deep shore well completion are the main subjects of my experience.
Free! A Professional Engineer with more than 27 years oil & gas experience. P. Eng Status current
Free! If you are seeking a project expert in the energy, oil, and gas industries, who brings a comprehensive background beginning in on-site project management, and expands into in-country executive, driving new business, contracts and client relationships. I would be an excellent candidate for your consi
Free! HIGHLIGHTS: Geology, Oil sands, Heavy oil and bitumen recovery, Drilling, Well logging, Advanced Petroleum Technology; Methodical, efficient thought procces, positive and professional attitude, job task planning and organizing
Free! I have been working in this field for over 10 years now. Done work in both maintenance and construction in the past. In dealing with the Start-up/Commissioning of various projects, I have gained knowledge of Computer control systems, DCS, PLC, Pneumatics and dealing with customers one-on-one.
Free! Helicopter view, fast analysing, creative in finding solutions, mind setter for safety
Free! I am a geophysicist with over 5 yrs experience in the oil and Gas industry with experiences in Seismic Processing contractor QC, 4D Seismic analysis, Basin Sweep Prospect analysis
Free! Instrument Engineer and technician with 27 years experience in design, installation, commissioning, start-up, operations and maintenance of oil and gas facilities worldwide.
Free! 19 years in Oil and Petrochemical with Project Management, Commissioning and Maintenance/Reliability background as well as all associated mechanical equipment and safety system. BS in ME and MS in Engineering Science. in English and Mandarin.
Free! Experienced Safety engineer, CSP. Bilingual Spanish/English. Authorized to work in the European Community.
Free! Experianced in budgeting and planning, Experiance in leadership and mentoring of apprentice instrument hands,
Free! 15+ years experience HSE oilfield operations. Experience includes seismic, drilling, completions, construction with extensive exposure to heli-portable. Experience in North Africa, all areas of Canada including Artic. Client rep for large oil/gas producers.
Free! E&I Supervisor with 28 years service in all divisions of the electrical industry
Free! Good communication skills, Able to work with no supervision. Self Motivated,team leader. Extensive organising,work prioritisation and related Skills. Proficient using Maximo and Federal Supply System. Knowledgable with Excel,Microsoft Access,Windows Xp
Reservoir Engineer, Heavy Oil Recovery, EOR, Production Optimization, Simulation Studies
Lead process engineer
Twenty years instrument and control systems experience includes positions as: lead instrument and control system engineer on onshore and offshore design and construction projects for oil and gas plants, refineries, pipelines and chemical plants
I am NACE Certified corrosion specialist, fellow member in the institute of corrosion. I have BSc and MSc in chemical engineering and PhD in corrosion engineering with long experience in R&D, oil and gas industry.
As a Principal Process Engineer supervised and executed over 20 basic engineering designs (grassroots and revamps) of ethylbenzene, and styrene monomer units. Participated in 6 startups, 5 of which overseas. Also supervised or participated in numerous technical proposals and feasibility studies.
20 years experience in drilling/work
Experienced geologist
Engineering design, offshore and onshore pipelines and facilities, Report writing DBM, FEED, PEP
Production chemist involved in oil & gas flow assurance, development and validation analytical operating procedures, reliability plant engineering
Ammonia, LPG/LNG, freon, electrical and water systems
I am Nace certified Coating Inspector Level 3 & ACA Certified Corrosion Technologist . My basic qualification is B.Sc.( Che), Mechanical Engineer I am having Total 24+ yers of experience in the field of Coating. 10 years in Oil & Gas Inspection on offshore & Onshore
Instrumentation and control engineer and instructor Phd neural fuzzy modelling and identification, optimization using genetic algorithms
21 years experience in corrosion engineering, monitoring and applying corrosion mitigation strategies to oil/gas/petrochemical industry. Detailed experience in cathodic protection (CP), pipeline integrity, chemical treatment, corrosion monitoring, coatings and corrosion/mechanical damage assessment.
21 Years Experience of Process Engineering in Refinery/Oil & Gas
A geologist currently working with a major oil companies, specialized in reservoir characterization, formation evaluation, operation geology and geosteering in clastic reservoirs. Develop expertise while working in Australia, Saudi Arabia, North Sea, India and several other international projects.
Professional Mechanical Engineer, Gas Pipeline Engineer, Metering Station Engineer, Project planning and Control Engineer, Project Engineer, Drilling Engineer, Project Manager
My skill in maintenance and repair of heavy equipments,compressors and pumps
Reserve Management, Project Economics,Exploration Risk Analysis, Acquisitions
I exerted with different degrees the most of geophysicist tasks and particularly the supervision of seismic processing and interpretation projects. I am particularly interested in the static corrections in dunes areas. I have a personal work on the subject that has yielded good results
Petroleum Geologiwst, oil and gas exploration and production, geologic mapping
Bachelor Science degreed as Civil Engineer with 23 years of professional experience in different job positions in petrochemical, fertilizer, power plant and open coal mine, related with design, engineering, construction and maintenance of reinforced concrete structures and steel structures.
Engineer - Geologist of Oil and Gas Exploration
Senior Production Technologist
I hold the B. Sc. and Master’s degrees in Geophysical Engineering from Polytechnic University of Tirana (1977), Albania. Thirty years of diversified experience in well logging, administrative projects, and quality control. Providing petrophysical support to the integrated study
30+ years of EPC and consultancy Process experience. Conceptual design, Simulation (Hysys / proII) of oil & gas and refinery processes. Expertise in oil & gas gathering stations, gas sweetening, dehydration; Water treatment and injection systems; NGL units employing Turbo-Expanders; Refinery units.
More than 30 years experience in civil structural design, consulting and supervision in upstream, downstream, and pipeline of oil and gas fields
Experienced on all refinery products and intermidiates. Competent assessor for ISO 17025
Indian, working for U. S. Dollar Seven hundred twenty million hydro-carbon handling project in NIGERIA and received excellent employee award Seeking Director / ManagerHSE/Environmental/Civil Education: Ph.D. (IIT Bombay) and Safety Diploma
Designing , Praparation & Checking of high pressure transmission pipelines
„w Trained competence through training in Electrical Design Software Analysis (EDSA) and Project Management Techniques
Petroleum Reservoir Engineer,
First   [ 1 ]   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com