Resume - Design Engineer (Piping & Stress Analysis), Mechanical Engineering

Misco Jobs

Resume #33769

CONTACT INFORMATION:
View contact information...

Design Engineer (Piping & Stress Analysis )
(Oil & Gas / Plant Piping / Cross Country Pipelines)
A result oriented, capable, ambitious Mechanical Engineer with Piping Design & Stress Analysis and on-site experience along with leadership capabilities seeks a suitable position

EDUCATION & TRAINING
* Piping Engineering Course, Dec' 2002 Indian Institute of Technology (IIT Bombay)
* B.Tech (Mechanical Engineering), 1990 to 1994
Graduated in first Division. J N Technological University (Hyderabad-India)

SUMMARY OF PROFESSIONAL EXPERIENCE
Engineering:
* With 11 Years of experience in Consultancies / Engineering Organizations in the field of Oil & Gas, Process plants, Refinery and Cross Country Pipelines.
* Stress Analysis of 48" and 42" diameter networks and Flexibility calculations of the piping system.
* Well Experienced in Detailed Engineering and Design Calculations of Piping Systems.
* Pipeline Engineering Design, Finalizing the route corridor and developing land clearance strategy. Preparation of Route drawings, developing Alignment sheets.
* Pumping Stations, Block valve stations, Buoyancy control, Cathodic protection (Sacrificial anode / Impressed current), River crossings, Road crossings, Hydro test and Pre-test pressure calculations, Method statements, Ditch breakers, Slope breakers, Field coating.
* Compressor Station, Pressure reduction skid / Filter separators / Gas Coolers / Fuel Gas System / Instrument Air System / Vent Stack / Gas Heaters / Metering skids / Pressure Control stations
* Preparation of Test packs and Performing Hydrostatic test including Commissioning.
* Design experience of Developing Piping Systems, Piping Layouts (heavy & complex) and Isometrics with Material take-off.
* Design and Selection of Pipe Supports for Hot and Cold services.
* Working knowledge of National / International (ANSI / API / ASME / SHELL / PDO / TotalFinaElf / Gasco) engineering standards / codes, statutory and recommendatory requirements.
* Plan and manage projects, and Prepare Material, Cost and Timing estimates, report and design specifications for machinery and systems.
* Fully conversant with ISO 9000 Standards and Practices.
* Preparation of Technical & Procurement specifications.
* Sizing & Designing of Flow lines & Cross Country Pipe Lines according to API-5L or 15L specification
* Construction Engineering and Engineering support to Fabrication Workshop including Practical experience in site for three years.
* Departmental interaction with concerned disciplines like Process, Equipment, Civil, Electrical and Instrumentation and QA / QC.
* Keenly involved in conceptualization and evolving of Design department for Oil & Gas unit in Galfar Engineering and Contracting.

Tender and Material Procurement:
* Preparation of Material Specification * Placing Indents & Inviting Quotations
* Preparation of Piping & Equipment engineering packages
* Technical Evaluation of tenders & Recommendation
* Design checking of vendor drawings * Technical bids & Vendor development.

PROFESSIONAL BACKGROUND
June' 2004 to Till date ILF & Partners LLC, Muscat – Oman.
Mechanical Engineer (Piping & Stress Analysis)
* Sohar Pressure Reduction Terminal and outlet gas pipelines of consumers for Oman Gas Company (OGC)
* Gas Heaters / Filter separators / Metering skids / Control stations
* Eastern Gas Distribution System for Dolphin Energy Ltd. (DEL)
Abu Dhabi (UAE)
* 42" diameter pipeline network for base case
* 48" diameter pipeline network for swap option including hot tap
* Stress Analysis of 42" diameter pipeline network
* Compressor Station – Al Ain
* Hot tappings
* Pressure reduction skid / Filter separators / Gas Coolers / Fuel Gas System / Instrument Air System / Vent Stack
* Piping / Equipments specifications and datasheets
* Pigtrap integrity evaluation study for Abu Dhabi Oil Co. (ADCO)

Feb' 2002 to May' 2004
STA Joint Venture (Stricher, Haudstaut&Timmerman, Günsayl, Alarko) (Turkey)
Pipeline Engineer
* Supervising engineering team of 4 engineers and 5 draught men.
* Worked for the 42" diameter BTC (Baku-Tbilisi-Ceyhan)
Crude oil Pipeline in Turkey.
* Supervision of Construction including QA / QC.
* Stress analysis.
* Handling service contracts for Petroleum Development Oman
(PDO) on deputation.

1999 to 2002 Asian Brown Bowery, (ABB) (Soimi spa-ITALY)
Piping Engineer
Designing and Detailing of
* Shurtan Gas Chemical (Ethylene & Polyethylene) Plant, Kashkadharya, UZBEKISTAN
* Managed multi discipline design engineering team consists of 3 engineers and 4 draughtsmen.

1994 to 1999 Bharat Heavy Electricals Ltd, (BHEL-India)
Project Engineer (Design)
Successfully Designed and of Engineered of
* 240 MW Power Project, Kayamkulam –INDIA.
* HRSG, CPP Expansion project for Hind. Petroleum Corporation Ltd, Mumbai, INDIA
* CPP expansion Power Project for Russep Power Project, (OMAN).

COMPUTER SKILLS
Engineering Applications * PDMS * CAESAR-II * CAE-PIPE * Auto CAD
Tools * MS word * MS Excel

ADDITIONAL INFORMATION
* Work effectively independently or as a part of team.
* Strong communicational and interpersonal skills.
* Availability: One month
* Expected Salary: Negotiable

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2101 to 2150 of 6541)

Go to Search Parameters...

Brief Description

Corrosion Engineer with 5 years of experiance in DownStream Oil and Gas

Over 8 (Eight) years of experience in Construction Welding Inspection, painting Inspection,NDT, QualityControl/Qality Assurance, surveillance, execution, co-ordination,hydro testing and destructive testing in the field of refineries,petro chemicals, fabrication yards and offshore platforms.

6 years exp in piping design engg field

I have been working infield of structural Design since last Eight years-using modern technologies and software. I done RCC , Steel & Precast Structures in commercial, residential & industrial Area

M.Sc. Geologist, looking for a job in oil industry

Electrical Design, Feasibility Study, Safety Audit, Procurement, Installation, Punchlisting, Commissioning / Start-up & Maintenance Experience in Oil & Gas (Petroleum Refinery) Industry - Project & Maintenance Departments

Rotating equipment Engineer, 12 years of experience in petrochemicals plant(Polypropylene plant experience spheripol & novolen technology)

Do all activities of SHE for all units running at the refinery such as safety committee, HAZOP studies, EIA, Inspections, Audating, work permits

Analysis Estimation-Officer 10 years as operations engineer in power plant

Electrical Engineer, Transformer especiallist, excellent project management, supervised High Voltage test field project C$ 20 M, excellent computer skills including networks administration

Master Qualified Instrument Engineer with 10 years experience of detailed design engineer

Working as Mechanical Maintenance Supervisor.

Masters Degree in Metallurgical Egg with Specilisation in Welding Egg. Prepare, Review & Approve Welding Procedures as per various Codes / Standards. API 510 Pressure Vessel Inspector.· Trouble shooting of welding and related issues.

Inst. Engineer with 13 years Inst. Design experience in the field of Oil. Petrochemical Refineries. Attended FAT/ SAT, Hazop etc.

Operation Drilling Engineer - Drilling Superintendent - Drilling/Completion/Work Over Supervisor

PDS, CADWorx, Rebis AutoPlant

HSE Officer

A senior Process Analyzer Specialist with twenty – five years of experience in the Petro Chemical Industry. Strengths include: design work, upgrades, start–up assistance, works to meet tight deadlines and budgets; pays close attention to detail.

Fully experienced in all aspects of maintenance of oil and gas production facilities, hands on experience of major overhauls of rotating equipment which includes operation of GE frame 5 Gas turbines.Responsible for supervision of all disciplines to ensure safe and efficient maintenance proceedures.

I hold a Bachelors Degreein Petroleum Engineering. I also have a 2 year hands on Rig experience with Transocean and 4 year LWD Engineering with Major companies.

I graduated from the University of Oklahoma, USA (Msc Petroleum Engineering), I have been working for the Algerian oil company SONATRACH as a Reservoir Engineer since Feb 2005. I can assure you that I am reliable and hardworking, ambitious and highly motivated individual

15 years in the Canadian Oil and Gas Industry, I have a well rounded understanding and knowledge of the industry. I have worked as a mud engineer providing technical service to the Western Canadian Foot Hills region. Have a great understanding of oil base fluids, water based and advanced Gel/Chem

Junior Well SIte Geologist, Junior Pore Pressure Engineer

6 years experience in Drilling Rigs,shipping &Oil & Gas field as a Piping Designer.

chemical engineer with 6 years experience on oil and gas production platform in Persian Gulf, commissioning and start up alongside with SHELL company

Automation engineer

Experienced, skilled, self-motivated, petroleum geologist with strong 2-D/3-D seismic interpretation and prospect generation background in South Louisiana and South Texas. Team player with strong workstation skills and ability to provide quality interpretations. Seeks a position to work on diverse

Petroleum Engineer with almost 6 years Experience

Senior Chemical Engineer - professional with more than 20 years work experience in Oil refineries-execution, running and shutdowns, Industrial projects, Construction, Manufacturing, Water treatment plants, Projects management, QC/QA Management, Internal auditing and latterly specialist Educator

Simulation Engineer

with computer proficiency in SESAM, ABAQUS, PATRAN, FLEXCOM, ASAS, SACS, FEMGV, STAAD Pro, AutoCAD, and MathCAD

Managing multidisciplinary Sub Surface Team in respect of strategic planning, coordination and monitoring of sub surface activities

Expertise in analysis of Chemicals, petrochemicals, petroleum products using instruments like ICP-OES, GC, HPLC, AAS, FTIR, CS Analyzer etc. Having expertise in SPC / SQC techniques, LIMS and SAP QM module. Research in Petrochemical and petroleum products. Worked for Chevron Oronite lube additive co

Project Engineer / Manager

Petroleum Engineer with experience in Chemical Treatment.

I graduated from Technology Industry School in 1988. I worked for PT Arun LNG.Co. for 11 year since Nov.1989 to March 2001. I have been working for Qatar Petroleum as Senior Laboratory Techinician since March 2001 to present.

vender inspection, Inspection of internal & external coating for steel pipes, pipe fabrication (LSAW&HSAW), NDT methods witness(RT,UT,MPT & LPT).

A good worker, I do my best.

I would like to inform you that I (RAVI KUMAR PALLELA, S/o RUDRAYYA) completed my degree in B.E (Production) discipline with 70.3% in First Class with Distinction from Swami Ramanand Theerth Marathwada University, Nanded in the year 1999. I Have More than 6 ½ Years experience in CAD/CAM area.

Highly qualified in 3D modeling and design as well as control and instrumentation

Worked as marine engineer, certification from Uk, maintenance and operation of machinery

Having more than 12 yrs experience in safety field. Ready to accept any new challange. could able to work any pressure environment.

I am Mechanical/Pipeline Engineer working in the Oil and Gas Industry for more than a decade now.

Quality Assurance, Quality Control, Construction, Project, ISO 9001, System Development, Implement, Audit, Corrective & preventive actions, Continuous improvement, Oil & Gas, power & petrochemical industries

Senior process engineer O&G; 19yrs exp. FEED, basic & detailed eng, operations. Troubleshooting, P&ID, C&E, risk assessment, HAZOP. Units: compression, dehydration, oil/water separation, cond. stabilisation, hydrates, gas/water injection. Computer skills: Hysis, ProII, Pipephase, HTRI, Flarenet.

Area of expertise is ranging from Preliminary and Details Design, Construction

Design Engineer (Piping & Stress Analysis), Mechanical Engineering

9 years in Pipeline Engineering, Project Management/Engineering Co-ordination for Conceptual, Bid & detailed design / engineering, & construction, Analysis and Design of RCC & STEEL Structures.

• Field Instrumentation Eng,PLC ,DCS RS3 rosemount oil and gas 7years

A well experienced senior level QA/QC Engineer, Welding/Coating inspector

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 [ 43 ] 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out