Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #33903 next resume »»
CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
* Master of Engineering In Metallurgy from IIT –Roorkee * Graduation in Mechanical Engineering-1989) * Qualified in Radiography Level II, Ultrasonic Level II,and Trained in Magnetic Particles Test, Dye Penetrate Test* Internal ISO 9001–Auditor * Fellowship GATE(UGC)—1990-1991

Working with PETROFAC-SHARJAH
AGIP-KCO-Kazakisthan is a Oil, Gas & Sulfur EP project having materials with low temperature (Minus 40 deg C) and sour service application. Scope of supply also includes structural material with low temperature application. Function and responsibility included:
* Checking vendor documents like, Inspection and Test Plan, NDE procedure, Weld Books(WPS&PQR), Material certificates, PWHT, PMI, Hydro test Procedures,PMI for Pressure vessels, Cladded vessels, Column, Air cooler, Shell and Tube heat exchanger, welded and seam less pipe, valves fabricated items and various skid mounted packages.
* Participation in vendor evaluation and assessment before awarding the contract.
* In depth knowledge in welding, material properties and heat treatment characterstics
* Participation in Pre Inspection Meeting at various vendor locations
* Coordination with Third Party agency and review/commenting the inspection reports and Release note.* Stage inspection and final inspection as per Inspection and test plan.
* Visited GMMOS,FAB TECH in Dubai, ADYARD in Abu Dhabi, and OFMECO MONTOVA in Italy for stage inspection.* Coordination with Client for technical discussion on Quality related documents and document approval.
* Reply on various technical queries of Client and vendor.Name of company: Technip-Rome-ItlayExperience: From April 2003-Feb 2005 Project: Gas to Liquid (GTL project) SASOLWork Area: Material Technology (QA/QC, Inspection) This EPC project involved new technology, for converted Gas to Liquid, under the process license of SASOL, Stone & Webster. Supplemented by stringent specification of SASOL and Chevron. Project involved wide variety of material like Carbon steel, Low alloy steel (P3,P4,P5), Stainless steel & Cladded material.Being the sole Material engineer in this project, had to alone check all quality related documents and replying to various client & vendor queries Responsibility included:
* Checking the vendor documents like, QAP, Inspection and Test Plan, Fabrication and Quality Control Plan, NDE procedure, Weld Books (WPS &PQR), Material certificates, PWHT, Hydro test Procedure etc, applicable for Hydro Cracker Reactor, pressure vessel, Column, Air cooler, Shell and tube type exchanger and various skid mounted unit and fabricated items.
* Participation in Pre Inspection Meeting at various vendor locations* Coordination with Third Party agency and review/commenting the inspection reports and Release note* Dealt with various material & equipment for GTL project with different stringent services.* Replying to vendor queries in line of Construction code and Project specification.* Participating in Pre Inspection Meeting.
* Visit vendor fabrication shops SEWON, SUGJIN CHANGWON in Korea, for stage inspection Name of company: GEI-Hamon Inds.
Experience: April 1997-April 2003.
Projects: Relaince Jamnagar, IOCL Panipat, GAIL, BPCL etcWork area: Inspection, WeldingDesignation: Senior ManagerGEI -Hamon–An ISO 9001,ASME U Stamp organization- is involved in manufacture of ASME coded pressure Vessels, Air-Cooled heat Exchanger, shell and tube type heat exchangers, cladded pressure vessels, auto claves, reactors. Responsibility included:
* Finalizing Quality Assurance Plan based on customer Specification
* Detail & stage inspection from material identification to Hydro test and monitoring of NDT activities.
* Responsible for WPS, PQR and, WPQ, Qualification as per ASME SEC IX,.EN 288,ASME B 31.3 etc.
* Making Welding Qualification Procedure with NACE requirement like hydrogen induced cracking (TM0284) SSCC cracking (TM0177).
* Welding consumables selection for each project
* Preparation of the Weld Books comprising of weld map, suitable process, welding instruction.
* Preparation of chapter of welding control & post weld heat treatment in ASME U stamp manual.
Name of company: ISGEC-Yamuna Nagar, Experience: Dec 1994—April 1997Projects: IOCL Panipat, BPCL, RIL,ONGC etc Work area: Inspection, Welding Technology
Designation: Senior EngineerISGEC- An ISO 9001 & ASME U company- is engaged in the manufacture of ASME coded pressure Vessels, shell and tube type heat exchangers, cladded pressure vessels, auto claves, reactors etc.
Responsibility included:
* Carrying out stage inspection as per approved ITP from Material Identification to Hydro-Test.
* Reviewing radiographic films and conducting the ultrasonic before attending the repairs.
* Involved with welding technology for qualification of WPS, PQR, & WPQ and any new technological development like narrow gap welding, strip cladding.
Name of company: Advani-Oerlikon Ltd
Experience: Dec 1992—Dec 1994
Worked as Application Specialist (welding Specialist). Role was to support sales team on technical front and to resolve various welding related issues.Name of company: Dayachand Engineering Industries Experience:
April 1992—Dec 1992.
Worked as Quality Control Engineer.
Name of company: R J industrial Corporation Experience:
June 1989—July 1990 Worked as quality control engineer

I assure you that all above information given by me are true to the best of my knowledge.

Further details of my work areas will be discussed when called for personal interviewRajiv Lochan Garg

View contact information...
«« previous resume next resume »»
Search Results (Resumes 1251 to 1300 of 6997)Go to Search Parameters...
Brief Description
Experiences: Oil / Gas Field Facilities, Pipeline and Production Plant Operations, Commissioning and start up
Professional Drilling Consultant
PIPING DESIGN ENGINEERING
For the past 15 years I have been employed in petrochemical piping & Power Plant design & drafting utilizing Autocad, Microstation, 3D CADWORX, Plant 4D Programs and Field surveying using Total station and 3D Leica ScanStation 2, using Cyclone and CloudWorx programs to obtain as-builts of existing f
Free! An MBA graduate with 6 years of work experience in the oil and service-related industries. Experience in ESP, HPS, VSDs, PLCs, HMIs, and SCADA systems. Additionally, I have experience in project management.
Planning Engineer, Workshop Management, Maintenance and Material control, Safety Officer, AutoCAD, Fleet Management System Software(FMS),IVMS Download, Internet Skill, MS Word, Ms Excel, Corel Draw, Primavera Project Planner (P3), Ms Project, Power Point, Ms Dos, Publisher, Page Maker, Etc
Having more than Twenty (20) years of experience in the field of Supervision and Inspection of Welding, Piping Fabrication and Installation in the Heavy Industrial construction such as Oil and Gas Plants, Power Generating Plants, Petro-Chemical and other Industrial Insta
Free! All round drilling expertise from driller up to management. Managed on- and offshore drilling campaigns world-wide. Shell Round II. Currently head of drilling rig planning, acquisition and divestment for Shell Malaysia. Analytical and problem-solving capabilities. Broad engineering background.
Subsea systems (Controls, Trees and Wellheads). Service and Manufacturing of downhole drilling tools, BHA components, DD equipment & fabrication. Project team, QS, FAT, MC & ITP. Internal/external Audits, Procedural writing and MRB’s. ISO 9001:2008. UT, MP & UT Level 2.
self starter, great communication skills, great with microsoft programs, familiar with oilfield environment
13 years of experience in Engineering Projects & Maintenance, design engineering, construction and commissioning of instrumentation in petrochemical and chemical industries involving detailed engineering including, project estimation, preparation of instrument specification, comparison statement ,pr
18 years petrochemical experience, senior engineer
10 Year experience in FEED & Detail engineering of Electrical System in Oil & Gas, onshore Plat-form, Petrochemical Plant, Automobile sector and Pharmaceutical Industries
Numerical Simulation (Eclipse/Petrel RE), Analytical tools(PROSPER/MBAL), Well testing, reserves estimation, material balance,decline curve analysis, production testing
Chemical Laboratory Analyst / Chemical Process Technician.
Quality Engineer
Seven years of Process/Project engineering experience encompassing process design, process safety management and regulatory compliance, Project scope development, Project scheduling, Project execution strategy. Areas of process design specialization include relief system design, equipment design.
Process Engineer
Experience in developing PFD’s and P&ID’s to IFD and to IFC.Experience in line sizing, pump sizing, control valve sizing, relief valve sizing and vessel sizing. Experience in preparing LDT documents, Rev Lists. Proficiency in process design software like ASPEN PLUS,HYSYS, PRO II.
Trouble shooting of problems in various field instruments, DCS (Honeywell – TDC3000), I Have deep knowledge in Gas Turbine and Compressor related instrumentation systems
I have drilled over 100 wells, both explorational and development. I have directly planned and executed major drilling, recompletion, and completion programs. I have designed well logging programs. I have also participated in extensive reservoir characterization studies.
Experienced distribution center in-charge, materials planning and control handler, and warehouseman (total 14 years) and mechanical engineer in practice as power plant maintenance and engine tender. Computer literate, resourceful, constructive decision maker. Easily adapts to any working environment
Construction/Commissioning Instrumentation & Control Superintendent, or Project Management (PMC-role), or I & C Field Engineer/Supervisor, or I & C Maintenance Engineer
16 Years of Experience; Experience in managing the Quality control & Quality assurance activities for large integrated engineering projects. Exposure in vendor documents, correspondences with client, vendor, carrying on stage & final inspection with client. Exposure to International code
Planning & Scheduling by Primavera P3; Structural Design by STAAD-PRO 2004
From 2005 Clough Engineering & Integrated Solutions (CEIS) Pty Ltd
Structural draughtsman, working sice last 14 yeards, with 2 yrs. gulf experience,
Boiler Purchasing, erection, commissioning, startup, troubleshooting experience.
Versed in blasting and painting for the past 20 years
Chemical Engineer with more than 20 years experience in construction, testing, precommissioning and commissioning of utility plants in Oil & Gas, Fertilizer and Petrochemical industries.
I'm a Science Graduate. B.Sc., from Andhra University, INDIA in 1985, Working as Comissioning Engineer With LURGI team since Sep-2007. well versed with Pre commissioning, commissioning, start up, Normal/ Emergency shutdown activities and performance test of PDH (Propane D ehydrogenation) Plant.
Over 20 years (5-1/2 years in India and 15 years in Gulf) of experience in the field of Pipelines in reputed Engineering Consultancy firms. Worked as a Lead Pipeline Engineer for various PDO (Oman) and Saudi Aramco Oil/Gas cross country pipelines and in-plant pipeline tie-in projects.
Metallurgical/Materials Engineering, failure analysis of gas turbines components, remaining life assessment, gamma prime growth morphology in nickel-base superalloys, high temperature coating degradation and failure mechanism, creep behavior of the alloy, fatigue crack initiation and growth
Corrosion control, cathodic protection
Electrical and electronics engineer with 24 year experience in a major fertilizer, chemical and petrochemical industry. Also have a strong back ground in communication field
Over 16 years of experience working as a Process Engineer including 5 years as Lead Engineer supervising/coordinating engineering design teams in multidiscipline engineering companies. Has executed Conceptual Design, Front End Design and Detailed Design projects in Oil and Gas, Refineriese etc.
More than 20 years of professional experience in engineering design, construction and project management. Familiar with international standard including Saudi Aramco Engineering Stds. & design practice. Well verse in engineering software for electrical power system design analysis.
Industry and project experience in developing, analyzing, training and implementing simulation and advanced process control for refinery, chemical, and petrochemical operations.
A Senior / Chief Estimator level experienced in Oil & Gas, Mining, Power plants, Manufacturing. Representing Owner, EPC and EPCM companies, Over 25 Years.
Operations Manager/Field Engineer - Borehole Seismic
Experience in project management, design, front end engineering, installation, testing and commissioning.
I am an energetic, hardworking candidate. I am seeking an entry level opportunity.
Having, 21 years in Instrumentation Field, Maintenance, Project and Execution includes Oil and Gas and Power Plant Experience with Gulf Experience more than 7 years. Having good exposure to PLC and DCS, with Leading Role responsibility
Obtain a position with a company that is a leader in the Drilling and Completion Fluid Markets of the Oil and Gas Industry. I offer my experience in product conception, presentations, extensive research and development skills
I'm a post graduate in M.Sc., engineering Phy & Instrumentation and having total 16 1/2 years hands-on experience on Control & Instrumentation systems (Maintenance and Projects ) being used mainly in Power plants /Steel /Pulp & Paper and Cement .
joined as shift driller and elevated to drilling superintendent. experienced in directional drilling. exposure in design, planning, drilling and completion of wells.
Looking for a challenging career with a progressive company as an instrument & controls specialist to demonstrate international versatile experience and leadership capabilities in the field of instrumentation and controls.
Professional engineer,17 years, heavy & conventional oil, oil sands & gas. Expertise-hydraulic fracturing, well testing, reserve analysis, property evaluation, simulation, log analysis, workover & stimulation, water flooding, steam stimulation, SAGD, horizontal well. International. Multilingual.
Graduate in Petroleum Engineering.
Steam and Power Specialist
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   [ 26 ]   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2009 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com