Resume - Objective: Employment in petroleum production engineering, rig supervision, pro...

Misco Jobs

Resume #3423

CONTACT INFORMATION:
View contact information...

CAREER HISTORY

SAUDI ARAMCO, Udhailiyah, Saudi Arabia 2000 - present
Lead Site Foreman, Gas Well Completion Division
* On-site supervision for non-rig completion operations on deep, high pressure, gas wells. Assure safe operations with wells exhibiting; H2S concentrations up to 9%, flow potentials in excess of 100 MMSCFPD, erosive flow conditions, flowing temperature of up to 250 deg. F, and surface pressures in excess of 6500 psig. Operations included either multi-zone proppant or acid fracture stimulations with associated; high pressure coiled tubing, well testing, high pressure hydrocyclone / filtration, electric line, and slickline operations.
* Wide exposure to various sand control methodologies and / or sand management systems for both gas and condensate production operations.
* Developed a cost tracking system for an annual 48 well, $96MM gas well completion budget and a non-productive time tracking system.
* Trained and mentored nationals in proper techniques for a full range of field operations.

BRITISH PETROLEUM EXPLORATION, Anchorage, AK 1994-Jan. 1999
Lead Production Engineer, Milne Point Unit, AK (1994-Jan. 1999)
* Supervised and provided engineering support for completion operations on oil wells including: completion design, hydraulic fracture stimulation, gravel packing, frac pack stimulation, perforating, cased hole logging, coiled tubing clean outs, production testing, and rig preparation.
* Prioritized and scheduled well intervention operations, interfaced and scheduled work with alliance service companies providing well services, and minimized simultaneous operation conflicts.
* Extensive experience with utilization of electric submersible pumps (ESPs) in oil and injection water production under a wide range of conditions including; high viscosity, high sand content, horizontal wellbores, progressive cavity pumps, and down hole heat trace systems. Familiar with unique applications of ESPs e.g. dual-purpose water source production and injection pumps.
* Experience servicing wellbores that ranged in depth from 3000' to 23,000', with deviations from zero to 104 degrees, and with gas lift, ESP, jet pump, and rod pump lift mechanisms. Worked in, and compensated for, extreme low (arctic) weather conditions.
* Selected to lead a multidiscipline team, consisting of engineers, business manager, rig personnel, and technicians, in developing methods to reduce the cost of replacing failed ESPs by $1MM / year. The goal was met and exceeded by approximately 100%.
* Interfaced with drilling and workover rig teams and program writers to optimize capital project programs, i.e. completion of new wells or remediation of problem wells

Production Supervisor, Projects, Milne Point Unit, AK (1994)
* Coordinated field implementation of a twelve well coiled tubing deployed ESP pilot project.
* On-site engineering representative for a sixteen well pilot project exploring the use of various types of completion methodology for a poorly consolidated, high oil viscosity (heavy oil) reservoir.
* Led a Spill Response Team of twelve individuals as Operations Section Chief, a key member of the Incident Management System, in preparation for and response to spill incidents.
* Established and maintained on-site spill response equipment and coordinated support by an alliance service company providing the training and auxiliary equipment / services for spill cleanup.
* Interacted with various governmental agencies on operation and construction permitting as well as emergency preparedness.

CONOCO, INC. 1979-1993
Production Supervisor, Projects, Milne Point Unit, AK (1991-1993)
* Supervised and provided engineering support for completion operations on oil wells including: completion design, hydraulic fracture stimulation, gravel packing, frac pack stimulation, perforating, cased hole logging, coiled tubing clean outs, production testing, and rig preparation.
* Implemented multi-million dollar civil construction projects utilizing up to 150 construction employees and the completion of projects in a cost effective and timely manner through management and cost tracking practices; e.g. construction of gravel / ice roads, gravel excavation pit management, heavy equipment operations, and construction / installation of flow lines.
* Managed and conducted environmental studies and environmental remediation of impacted areas.
* Responsible for the full range of high exposure operations in a remote, arctic coastal environment involving extremely sensitive environmental issues, strict compliance requirements, complications brought on by severe weather / permafrost conditions, and extraordinary operational costs.
* Coordinated and set up well work operations, interfaced with program writers, prepared daily operation summaries for management, and Team Lead and Facility Superintendent fill in.

Senior Production Specialist, Milne Point Unit, AK (1985-1990)
* Over seven years of experience (periodically throughout 1981 to 1990) as Rig Supervisor for both workover and drilling rigs. Ensured a smooth operation with up to 50 support, labor, and technical employees, while meeting strict deadlines.
* Managed the Department of Transportation regulated pipeline and oil sales; including operations in the processing facilities, corrosion monitoring, and chemical treatment.

Engineering Specialist, Milne Point Unit, AK (1981-1985)
* Integral member of the team tasked with the initial exploration, sanctioning, and development of the Milne Point Project (one of the top ten oil producing fields in the US); drilling and testing of the exploratory wells, project approval, and development of the upstream production infrastructure.
* Wrote drilling programs for well drilling operations.

Engineering Technician, Ventura, CA (1979-1981)
* Successfully completed a comprehensive volumetric reservoir study for a series of heavy oil reservoirs
* Engineering representative for engineering operations in the field

DRESSER ATLAS, Ventura, CA 1978-1979 Open Hole Engineer

EDUCATION

B.S. Earth Sciences (emphasis in Geology / Petroleum Eng.), PENNSYLVANIA STATE UNIVERSITY

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1351 to 1400 of 7054)

Go to Search Parameters...

Brief Description

Senior Drilling Engineer with more than 10 years experiences in Drilling, Measurement and Logging While Drilling. Outstanding background in field operations especially in drilling related job. International work experiences as Drilling Engineer, Directional Drilling Engineer, Rotary Steerable System

I am a chartered Engineer with ten years experience in the area of Instrumentation & Control. I have a 2(H)1 degree in instrumentation & Control from the University of Teesside, Middlesbrough, U.K. My experience spans trades, E+I design, senior/lead office roles in a global consultancy, site commiss

Instrument Technician with over 25 years experience in Project Engineering, Field Instrumentation, Inspection, PLC’s, and DCS’s. Experienced in a broad field of Hazardous and Volatile plants such as Hydrogen plants, LPG, Methyl Methacrolate and Resin plants as well as offshore platforms on the Natio

I am having experience in Both static & rotating equipments

BE Chemical

Basic and detail design of electrical power generation, distribution & utilisation system and various system studies as short circuit & earth fault study, relay co-ordination study, load flow study, motor starting & voltage drop study etc primarily in manual in the beginning of career and later in E

I AM INCLUDING MY RESUME SUMMARY WITH MY RESUME.

International employer with business operations located in Europe, South East Asia, and the USA that is in need of a tech savvy liaison for quality assurance validation of electronics and telecom equipment/applications.

I have over 22 years of experience in the drilling industry, and have worked in 21 countries. I have an extensive background in all aspects of drilling engineering, completions, production testing, well planning, contracts, operations, and logistics in remote land and offshore operations.

25 years exploration and production experience. Maintenance engineer.

Chartered offshore/structural engineer with seventeen years experience in design, analysis and reassessment of offshore and onshore structures in the in the North Sea and Middle East.

Exploration-Project Geologist, Petroleum Geologist, Well Site Geologist,

Highly motivated, results oriented with extensive and broad experience in the petroleum industry ranging from producing operations, reservoir and production engineering to management of a large technical staff.

Objective: Employment in petroleum production engineering, rig supervision, production operations supervision, or project management where seasoned experience, effective logistics, HSE practices, and practical technology can be brought together to attain corporate objectives.

Seeking challenging and rewarding career that will utilize my 13 years' work experience in the Oil Services Industry and more than 20 years of Physics, Mathematics and Computer knowledge.

I am interested in a position in the EHS field. I have a degree from University of Findlay

My experiences in mechanical works covered maintenance/construction of oil/gas processing plant and power plants. See attached Resume.

Over 14 Years of Strong Experience in Project Management, Estimation, Design & Procurement in Petroleum OIL,LUBES, Gas, and HVAC System.

Progressive and diversified experience in operation of gas pipeline transmission and oil field production. Proven track record in: Legal negotiations; Operations supervision; Budget management; System design; Project management; Conflict resolution.

Consulting Services Plant Construction & Modifications Reliability Inspections & Risk Assessment Maintenance Programs Pressure Equipment Design QA /QC Management Project Engineering & Management Procurement of Equipment Repairs and Alterations of Pressure Vessels and Storage Tanks.

A drilling professional with over 20 years experience. Able to work effectively in both field and office drilling positions with the ability to achieve results. I can offer proven technical, planning, execution, leadership, decision making, risk management and communication skills.

Wide ranging petroleum engineer with successful record in reservoir development planning/management, 17 years: BHP, PGS, BP, Agip, Burlington, Phillips, Marathon, UT Austin(1982-85), NL Baroid, international experience in Nigeria, Kuwait, Egypt, Angola, Norway, Algeria, Syria, NorthSea

Cost Engineer with gas pipeline & oilfield production background also some power plant and mining background.

Having completed my service at the age of 60 in Sept, 2000, I still want to live a busy life. Earn and live a better living exploiting 36 years of my experience in oil well drilling industry.

International Experience Superior Client Performance Evaluation

1. Project Manager for the engineering, procurement, construction and installation of Substructures (Jackets), Topsides, and Gas Compression Modules, FPSOs, Submarine Pipelines, Submarine Cables, Mooring Buoys and PLEMs ¨C Offshore Oil and Gas Industry.

Oil and gas phd in geology

Qualified and experience AutoCAD Designer familiar with the technical language of the oil and gas industries Civil & Structural drawings using AutoCAD, Isometrics, Process and Instrumentation drawings. Experienced with one of Shell’s major projects in the Niger Delta (Forcados Yokri Integrated Pro.

Five plus years of process engineering experience in the field of refinery and petrochemical with esteemed organizations in India and world.

Drilling Systems Offshore Instrumentation Engineer with 12 years experience

(IRCA, UK Certified Lead Auditor QMS ISO 9001:2008)

Diploma in Civil Engineering Studied

Seeking as an Engineer – Instrumentation in Automation, Design & Detailed engineering activities serving core industries that can utilize my skills and provides potential to enhance my knowledge and to attain goal of company.

Graduate Civil Engineer and Structural Engineering M.Sc., 6 years experienced in Offshore structures. Experience in jackets (FEED and Detail) and Semi-submersible (FEED and Detail) projects. Easy learning and excellent skills in softwares such as SACS, ANSYS, ABAQUS, GT Strudl, Solid Works, Patran,

Piping

MSc( Material Sciences & Technology),Certified Welding inspector-(AWS ¡V CWI) Certificate No. 05102011, CSWIP 3.1 Certificate No.26154. SAUDI ARAMCO (WELDING & MATERIAL INSPECTOR) APPROVAL No. SAP # 70004856, Well versed with international standards and ASME, API, AWS, ASNT and ARAMCO Standards.

Piping design and supervision experience, across a number of fields

2D and 3D seismic experience, QC- and seismic field engineer, basic knowdledges of process (Promax), strong Knowledges of sismic design (Mesa), Data base managment (office tools)

I am specialized in Process Analysers and Analyser System House house servicing and commisioning.Having More than 9 Year Experience .

I have a broad range of experience in both technical operations as well as management. Currently I am a Well Test Supervisor but I would like to look for position as a Well Services Engineer or Completion Supervisor. It is my career decision to be a specialist in all well services and completion.

Drilling Engineer

E&P Hydrography , GIS, Geoinfo Mgmt,Land Surveying, GPS, Coordinates Ref Sys, Survey QC Rep,Construction Surveying,Geomatics Records Mgmt, ASSAI – EP Catalogue

Now i present work with odebrecht company as QA/QC MANAGER

Senior Control Systems Engineer (PLC/SCADA), technically responsible for all software and hardware modifications, design review leader, functional safety assessor, HNC instrumentation & control.

Sr. Production Geologist / Team Leader, New Oil

Currently working with Kuwait Oil Company working on Integrity Management with BP consultant. Advance Safety Audits in various GC’s, Booster Stations, Insurance recommendations, QRA recommendations, HSEMS implementation and Audits.

Maintenance / Relaibility / Rotating Equipment Planning Engineer - Suitable Position

Self-motivated and with 16 years experience. Have a strong background in the major aspects of Petroleum engineering, workover program design and implementation, production management, Seeking challenging position as Workover & Drilling Rig Supervisor, underbalanced drilling Engineer, Production Eng.

Fifteen years of shipyard experience (technical and management), overall twenty-one years of mechanical design and project management in large industrial sites.

Operational, process, construciton, commissioning jobs

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 [ 28 ] 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out