Resume - Electrical Engineer with more than fourteen years’ experience in the filed of de...

Misco Jobs

Resume #34492

CONTACT INFORMATION:
View contact information...

CAREER PROFILE:
Teshmont Consultants LP Winnipeg, Manitoba,Canada
Senior Engineer
2004 to Present
* Working on Manitoba Hydro's PCB-filled Capacitor Replacement Project as a client engineer to replace 22 PCB filled filter capacitor banks with new environmentally safe equipment. Working on and performing following functions:

- Produced project documents e.g. scope of work, project implementation strategy, job responsibility sheets, progress reports, minutes of meetings, environmental management plan and etc.
- Wrote technical specifications for new high voltage equipment and EIPs for dismantling, installation and commissioning of equipment.
- Coordinating activities for the installation of new equipment and the disposal of PCB filled capacitors, PCB contaminated assemblies and contaminated soil.

* Involved in Dorsey Station Bipole 1 Synchronous Condensers Glycol Cooling Upgrade Project for Manitoba Hydro. Project includes design and engineering services for the replacement of outdoor glycol cooling system of six synchronous condensers. Design activities include:

- Preparation of design concept for provision of 600 V power supply, protection and monitoring of new glycol cooling fans preparation of equipment installation packages and commissioning procedures.
- Material Procurement activities include preparation of technical specifications for new cooling fan protection panels.

* Performed the budget estimate for new substations and substation modifications/upgrades. The activities included the following:

- Conceptualizing the scope of work and quantifying the subsystems.
- Estimating material for electrical system i.e. switchgear and other equipment, bus work, grounding, shielding, raceways, relaying and control, metering and other auxiliary systems.
- Coordination with different departments as Apparatus, Civil Construction, Civil Design, Protection Design, PC&M, SCADA and Commissioning to have their feed back on estimated material and construction/labor costs.

Projects completed:

- 66/12kV New St.Vital Substation conventional and GIS options, having two 66kV U/G cable feeders, two 66/12kV, 45MVA transformers and five 12kV feeders.
- 115kV, 54MVAR capacitor bank installation at Brandon Generation Station.
- 138/12kV 2MVA power transformer installation at Kelsey Terminal Station.
- Voltage sag mitigation at Whiteshell, different options.

* Completed the study and specified MOV ratings for series compensating capacitor for 500kV, 680km double circuit transmission line using electromagnetic transient program PSCAD/ EMTDC for power utility in Malaysia.

Powertek Global Inc,
Toronto, Ontario, Canada
Consultant
2002
* Completed interconnection/impact studies for IPPs connected with TVA network using advanced PSS/E.
* Carried out Load flow studies to identify system deficiencies in terms of over loading of transmission lines due to the connection of new power plants.
* Wrote final reports on load flow and impact studies.

Celestica Inc.
Toronto, Ontario, Canada
Engineering Technologist
2000-2002
* Resolved incoming quality issues and provided feedback to suppliers to improve their product.
* Coordinated with product designers to resolve technical issues relating to improve internal process.
* Inspected the manufactured electronics equipment for defects per standards IPC-610A.
* Performed the In-circuit testing for electronics assemblies using Unix based HP-3070 series-III and GenRad-87 computerized testing system.
* Performed failure analysis and trouble shooting of PCBs.
*
Water & Power Development Authority
Senior Engineer
1996-1999
* Performed load flow and short circuit studies for three IPPs to be interconnected to the existing WAPDA system.
* Carried out studies to determine impact of KAPCO, a U.K National Power based Power Company on WAPDA system using PSS/E software.
* Participated in troubleshooting activities at 220kV substation at KSK.
* Performed the commercial operation tests (COTs) like reliability run test, maximum capacity run, initial dependable capacity, reactive capability, no load, full load, load rejection and droop test of independent power producers (IPPs).
* Supervised the work of technical support personnel and provided technical diagnostic and engineering support.
* Prepared monthly outage reports for substations and generation stations in Lahore region and proposed future recommendations.
* Evaluated the technical data of electrical equipment and their approval.
* Carried out annual and monthly preventive maintenance schedules for 220kV & 132kV substations at Bund Road Lahore.

Water & Power Development Authority
Maintenance Engineer
1994-1996
* Assisted in the preparation, updating and delivery of training material for maintenance and operation staff.
* Tested substation of 235 MW WAPDA thermal project that involved upgrading of existing gas turbines to combined cycle plant by adding the steam turbine.
* Participated and supervised the field testing programs and equipment commissioning for 220kV switchyard of 5x24 MW Power Plant established by SEPCOL in private sector.
* Performed leakage current monitor (LCM) tests of lightning arresters, thermo-vision surveys and transformer oil testing.

Water & Power Development Authority
Protection Engineer
1992-1994
* Studied, analyzed and revised protection schemes for 220kV and 500kV Lahore- Tarbela transmission lines.
* Took part in commissioning and testing of metering systems for five IPPs Projects.
* Investigated, analyzed and solved indiscriminate tripping of substations and powerhouses of Lahore region.
* Performed relay settings for switchyard of 315 MW Steam Turbine Power Plant.
* Conducted inter-tripping testing of four 220kV Jamshoro- Guddu transmission lines.
Training
* 12 weeks Project Management training (PMP), 2004
* Microsoft Certified System Engineer (MCSE), 2002
* Management training- Project evaluation, Project scheduling and project monitoring,
WAPDA Academy Tarbela, 1992
* Technical Training including Distribution, Generation and Substations
Wapda Academy Faisalabad, 1991
Professional Affiliation
/ Membership
* Professional Engineer, Canada,
Registered Professional Member of Association of Professional Engineers and Geoscientists of Manitoba (APEGM)

PUBLICATION
Imran K. Khan, "Impact of Manual Versus Automatic Transfer Switching on the Reliability Levels of an Industrial Plant," IEEE Trans. Ind. Appl., vol. 41, no. 5, pp. 1329-1334, Sep./Oct. 2005.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 951 to 1000 of 6543)

Go to Search Parameters...

Brief Description

Lead engineer/Manager for DCS /PLC/ESD systems

Assist General Manager

IRCA Certified ISO QMS 2000 Lead Auditor (No:01181089) IRCA Certified ISO 14000 EMS Auditor IRCA Certified OHSAS 18001 OHSMS Auditor Certified Quality Auditor (ASQ CQA) Certified Welding Inspector AWS CWI Certified Quality Manager (CQM)

I have 33 years experience in design/construction project management on Petro-chemical Projects which include upstream oil and gas, refinery projects and chemical projects. I have managed both green-field and brown-field projects on schedule and within agreed budgets.

Qualified like Mettalurgical Engineer, specialty Metallurgical Processing, Internal Auditor for Quality Systems in accordance with ISO 9000 series, Computers abillities..

Instrument /control engineer

Experienced HDD Engineer

Petroleum Engineer with 9 years of experience in gas and petroleum reservoirs

Ability to manage multi projects and organize all procedures on and off sites to ensure the projects are completed on time and within the budget.

I have over 15 years experience working as Maintenance Planner in the Petroleum industry using Maximo and other computerized maintenance system

I have 17 years valuable experience: 6 years I was working in the gulf of suiz petroleum co. in Egypt. 11 years I was and still working in Abu Dhabi water and electricity authority in UAE.

·ICCP Design and Installation Principles · Quality Control – Pipeline Integrity Management, Data Management; Protective Coating Manufacturing Technology

Planning Engineer with a degree in Mechanical Engineering. Skilled in carrying out Daily Maintenance Planning & Plant Turnaround Planning. Expertise in using SAP PM & MM Modules. Conversant with Computerised Maintenance Management Systems. Hands-on experience in preparing MS Project Schedules.

Electrical Engineer with more than fourteen years’ experience in the filed of design, testing & commissioning and maintenance of substations up to 220kV; study, analysis, modifications, testing and trouble shooting of protection systems; power system analysis including IPP interconnections/impact

I have around 20 years oil and gas field experience,out of which about 5 years are in offshore.Presently I am working in an FPSO,in Mauritania,W.Africa.

CONSTRUCTION PROJECT MANAGEMENT: Managing all construction projects. Estimating time and material costs. Maintaining quality and cost control. Conducting weekly safety meetings.

Over 15 years oil industry experience with an unusually broad-ranging geological/petrophysical background. Proven ability to work efficiently as part of a small team due to well-developed technical and organisational skills. At ease with tasks requiring personal responsibility for attaining high sta

Field Instrument Engineer with a total of 19 years related experience with specialist knowledge of Control Valves. Qualified to Higher National Diploma level ( Mechanical Engineering , 1985 ).

More than 13 years of multi-international reservoir engineering experiences in gas and oil developments from sandstone and carbonate in land fields and offshore,including different stages of appraisal and development planning & management, well test, reservoir characterization & simulation, economic

A Petroleum Engineering professional with sixteen years of diversified E&P experience in onshore environments with an Indian national oil company, Oil India Limited and Cairn-Energy India Pty. Ltd (incorporated in Autralia)

Degree on Industrial Engineering. More than 15 years intensive involvement in Oil and Gas Industry (the last 9 years in supervisory level). Received various assignments such as Gas Plant Operator, Board Operator, Metering Technician, Field Engineer, Mechanic Supervisor and Offshore Supervisor.

16+ years working experience with major E&P companies in North Africa & SE Asia. Have extensive experience in supervising and implementation of reservoir management strategies, predict performance and optimize future depletion and field development planning.

I have commitment to safety, exceptional service and continuous improvement.

Petroleum Engineer looking for drilling or production work. 20+ years experience. Worked SE Asia, LA Gulf Coast, FSU, Saudi Arabia and Venezuela. Experience covers on site and office engineering in drilling and production.

Electronics Engineer, 12+ yrs experience, Project Management, Instrumentation design & detailed engineering, Maintenance / Oil & Gas and Chemical Industry.

QA/QC Engineer with AWS,CSWIP 3.1,QMS Lead Auditor,ASNT Level II in RT,UT,MPI,PT,VT

Was working like mechanical engineer, technician in ops & commissioning departments

Sr. Static Equipment Engineer

Drilling engineer with experience in directional drilling and programmer skills

Over 17 years of experience in Oil, gas and power projects such as LNG plants, offshore projects,refineries, gas based simple cycle, cogeneration and combined cycle plants, steam turbine based plants etc.

Mechanical Engineer Graduated as DI. Sulzer Metco AG (Switzerland) CH Wohlen Valuarc Thermal Spray Zinc. Metallization Arc spray School of Thermal Spraying Technology UK. Qualified applicator for all types of fireproofing and modern coating systems. A.I.O.C permit to work system.

I am a qualified, talented professional with excellent work experience(10+ years) *in Design, Erection and Commissioning of Control systems (DCS-ABB P14) in Power/Desalination Plants and fair knowledge of LV Switchgear*.

Computer Literate: Words, Excel, CADD (Micro Station), Familiar with National Electrical Code, NFPA, IEEE, Saudi Aramco CADD Standard and Engineering Standard and other International Standard.

I work for the Libyan national oil corporation as a HSE consultant, I have a very good computer skills, and I am bilangual (English and Arabic)

Project Mechanical Engineer with 10 year oil gas experience

i am original pipeline line engineer ,as well as project engineer

Compressor stations, Heat exchangers, Nitrogen pre-coolers, Turbine expanders, Cryogenic distribution lines, Cryogenic storage tanks, Vacuum, Control, CMMS

Document Management Sytem PM+ or Active Project, Diploma In MEchanical Engineering

Oil and Gas (15 years) Condition Monitoring (13 years) Reliability Engineer (8 years) Training (10 years)

My entire experience relates to substation & transmission line construction, maintenance, protection & instrumentation and project/design review engineer

Project Manager with Plus 13 years of rich experience of Piping & Pipeline in conjunction with Instrumentation, Civil & Electrical in Gas & Oil Industries both onshore & offshore including plus three years of Gulf experience in different trades of Piping.

18 Years of Experience in Detailed engineering in Preparation and Drafting, checking related to power Projects and Refinery & Petrochemicals. In both Indian & Global projects.

Presently I am working with ABB Lummus, Singapore in the post of Senior Structural Engineer.

GNPOC(Grater Nile Petroleum Operating Co.Ltd.Sudan.Through Ipedex. Senior Production Operator in CPF. Since Dec 2nd 2004

Drilling Engineer / Foreman (onshore)with 14 years field supervisory experience and 5 years engineering/planning experience.

1. 16 years of experience & 14 years as Licensed Engineer. 2. Problems Solver with high standards of quality. 3.

Drilling supervisor with 19 yrs of experience on land rigs exploratory, development, workover , horizontal, multilateral wells available . Excellent communication skills, result oriented, get after it attitude, hard working , safe approach, overseas experienced. IWCF valid. References on request.

i can all design for instrument Offshore & Onshore

Electrical Engineer, QA/QC Engineer, Pre-commissioning Engineer

Foreman/Mechanic in the feild of Diesel generator,I T I Fitter, 25 Year Experience

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 [ 20 ] 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out