Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #34512 next resume »»
CONTACT INFORMATION:
View contact information...

WORK EXPERIENCE: 14 -1/2 yrs

EMPLOYMENT HISTORY
Engineers India Limited, New Delhi (Aug 1991 – Till Date)
Working with EIL since 1991 and at present Manager in piping department. Worked for FEED preparation of LNG regassification terminal and and detail engineering for major refinery projects like CDU/VDU, CCR & NHT, FCCU, DCU, WHFU, BBU.
Posted at EIL-Doha Qatar since Oct-2005.

NPCC, Abu Dhabi (Dec-2001 to Jun-2002)
Worked as senior piping engineer for various on-shore / off-shore projects

CLIENTELLE
Petronet LNG Ltd, Indian Oil Corporation Ltd, Bharat Petroleum Corp. Ltd, Hindustan Petroleum Corp. Ltd,. ZADCO, ADMA-OPCO, QAPCO.

PROFESSIONAL STRENGTHS AND RESPONSIBILITIES
- Preparing / review of FEED for major refinery projects
- Piping Material Specifications and Valve Specifications.
- NDT, Insulation and Painting specifications
- Technical specifications for pipes, flanges, fittings, valves, special items like special valves, strainers, traps, hoses, steam supply / condensate recovery manifolds etc.
- Schedule of Quantities for piping construction works.
- Material take-offs, material & purchase requisitions, bid evaluation, review of vendor drawings.
- Development of Equipment Layout, review of Piping Layout Drawings, Isometrics, Supporting.
- Stress analysis of critical lines using CAESAR-II, design of special supports.
- Review of structural, columns / vessels and exchangers drawings.
- Field engineering for piping at construction site.
- Supervision and Co-ordination with team of engineers and designers
- Coordination with other engineering disciplines, clients, vendors, construction.
- Man-hour Estimates, Monitoring Progress and Job Schedules
- Fully conversant with piping codes, standards and practices followed internationally like ASME B31.3, ASTM, API, ASME,BS, NACE

SKILLS
Trained in Intergraph's Plant Design system (PDS-Intergraph-USA)
Trained in AutoPlant Designer, AP-ISO, ISOGEN
Trained CAESER-II
Excellent computer skills (AutoCAD, MS Office, Visual Basic)
Familiar with standards, specifications and practices of international consultants, process licensers and engineering contractors.

TRAININGS
Plant Design Management System (PDMS)
Plant Design System (PDS)
ISO 9000 Quality Management

IMPORTANT PROJECTS WORKED ON
Replacement of HP Steam Line, QAPCO Qatar (Oct '05 – Till date)
Role: Lead piping engineer
Scope: Engineering
Main activities performed are site survey, finalizing revised routine, stress analysis of the new line, design of special supports, material summary.

LNG Regassification Terminal Capacity Expansion, Petronet LNG Ltd Dahej (Jan '05 – Sep '05)
Role: Lead piping engineer
Scope: FEED and Project Management Consultancy
Objective was capacity enhancement from 5 MMTPA to 10 MMTPA of existing regasification terminal. Main activities carried out were site survey, data collection, gathering feed-back from plant operators, deciding plot plan, finalizing tie-ins points, co-ordination with other disciplines, preparing specifications for piping material, insulation, painting, NDT, preparing preliminary MTO and issued for Bids.

CCRU and NHT Unit, Green Fuel Project, HPCL, Mumbai (Mar '2004 – Sep '2005)
Role: Lead Piping Engineer
Scope: Engineering
Main activities carried out were review of piping studies, co-ordination with PDMS modeling team, interacting with other engineering disciplines, progress reporting, review of material summary and providing inputs to bulk material procurement group.

FCCU Revamp, IOCL, Panipat (Feb '2005 – Sep '2005)
Role: Lead Piping Engineer
Scope: Engineering for additional charge heater, new boiler feed water drum and associated facilities.
Responsibilities were P&ID review, site survey, finalizing location for new facilities, finalizing tie-ins and review of piping routine, piping material summary, data sheets for piping speciality items.

CCRU Revamp, IOCL, Panipat (Dec '2004 – Sep '2005)
Role: Lead Piping Engineer
Scope: Additional equipments like heat exchangers, fractionator bottom pump, Wet Gas Compressor and associated facilities.
I was responsible for P&ID review, site survey, modification of equipment layout to accommodate new facilities, tie-ins schedule, and preliminary piping routine, piping material specification and piping material summary.

Panipat Refinery Expansion Project (PREP), IOCL Panipat (Jan '2004 – June '2005)
Role: Lead Piping Material Engineer
Scope: Bulk Piping Material procurement for PREP project
Main activities performed were preparation of Piping Material Specifications, NDT specification for PREP, co-coordinating group heads for material take-offs, processing BOM, preparing requisitions, evaluating bids, review of vendor drawings, co-ordination with construction planning, resolution of material queries from construction site.

Delayed Cocker Unit, PREP, (Licensed by M/s UOP) IOCL Panipat (Jan '04 – Apr '05)
Role: Lead Piping Engineer
Scope: Engineering
Main responsibilities were supervision, review of piping layout drawing, co-ordination with PDS model designers, preparation of tender inputs for construction, preparation of package for approval from Indian Boiler Regulation.

CDU/VDU Unit, Refinery Modernisation Project, B.P.C.L. Bombay (Jul '2002 – Dec '2003)
Role: Senior Piping Material Engineer
Scope: Engineering
Responsibilities were co-ordination with PDS modeling group for piping bill of materials, processing BOM, preparation of material requisitions, technical evaluation of bids, vendor drawing review, co-ordination with construction planning.

NPCC Abu Dhabi, Assignment from EIL (Dec-2001-Jun-2002)
Role: Senior Piping Engineer
Scope: Engineering, FEED Review
Worked for various projects for ZADCO, ADMA-OPCO
i) SATAH Dehydration / Desalting & Sour Water Treatment Facilities Project of M/s ZADCO.
ii) SATAH Amine Unit Bypass / Standby Export Compressor Project of M/s ZADCO.
My main responsibilities were to review FEED prepared by M/s Mott Macdonald and M/s TABODIN Abu Dhabi. I reviewed piping material specifications, valve specifications, indicative plot plan, preliminary piping layout, painting specification, piping material summary, evaluation of offers from vendors etc including co-ordination with other disciplines like process, site survey at Zakum Island, and endorsement of FEED package for detail engineering.

iii) Replacement of 14" Water Injection Pipe Line Project of M/s ADMA-OPCO.
Main activities were to review piping layout, isometrics, preparing purchase requisitions, evaluation of bids.

Field Engineering Cell, FCCU, Haldia Refinery M/s I.O.C.L (Aug '2000 – Apr '2001)
Role: Senior Piping Engineer (Field Engineering Cell)
Scope: Field Engineering
Worked as field engineer piping at construction site. Provided assistance to construction planning, construction engineer in resolving site constraints, modified piping routines as per site requirements, co-ordination with construction contractor to resolve bottle-necks.

FCC Unit Haldia Refinery M/s I.O.C.L Licensed by M/s SWEC (May '1999 – Aug '2000)
Role: Senior Piping Engineer
Scope: Engineering
Activities performed were developing equipment layout, deciding R/R section platforms, technological structure elevations, pipe pack, preparation of job piping material specifications, review of piping layout drawings, selection of vessel cleats, preparing IBR Package for steam lines, co-ordination and review of vendor packages for WGC compressor, Slurry filter, CO-incinerator. Review of supports, stress analysis of critical lines, design of special support and spring hangers.

Central India Refinery, Bina, MP India of M/s BORL (Nov '1997 - Dec '1998)
Role: Senior Piping Engineer
Scope: FEED Preparation
Preparation of FEED documents related to piping for grass root refinery. My involvement was to communicate with various licensors, preparing indicative plot plans for CDU/VDU, H2 Unit, CCR/NHT, Sulphur Block, HCU units of refinery. Prepared basic engineering design basis, piping material specifications and standards, preliminary piping MTO for the off-sites.

Wax Hydro finishing Unit, Digboi Assam, M/s I.O.C.L. (Nov '1996 - Dec '1997)
Role: Senior Piping Engineer
Scope: Engineering
My responsibilities were checking of piping layout drawings and isometrics, Material Take-offs, stress analysis and support marking, preparation of IBR package for steam lines, site query resolutions.

FCCU, Panipat Refinery, M/s I.O.C.L Licensed by M/s SWEC (Jun '1995 – May '1997)
Role: Senior Piping Engineer
Scope: Engineering
Main activities were development of equipment layout, area division for piping layout drawings, deciding platforms for reactor/regenerator section, deciding platforms for stripper and debutanizer columns, pipe-rack studies, piping layout of technological structure, modeling using Auto-Plant Designer, extraction of piping layout drawings and isometrics using ISOGEN. I was also involved in Material activities like take-offs, preparing requisitions.

Bitumen Blowing Unit, M/s M.R.P.L., Mangalore (Jan '94 - Feb '95)
Role: Piping Engineer
Scope: Engineering
Main responsibilities were Material take-offs, stress analysis of critical lines, supporting, checking of isometrics.

CONTRIBUITIONS
I was co-coordinator from piping department in development of Integrated Piping Material Control and Procurement Software for handling piping material processing and purchase requirements including data transfer and co-ordination with construction sites using unique piping item coding system.

I developed software for calculation of pipe wall thickness, branch reinforcement and pressure limitations for mitre as per ANSI B31.3 using MS Excel and Visual Basic

I developed software for Hydrostatic Test Pressure Calculation as per ANSI B31.3 using MS Excel & Visual Basic.

PIPING STANDARDIZATION & COMPUTERIZATION CELL ACTIVITIES
Being a part of standardization cell of piping department main responsibilities were:
- Incorporation of new ideas to improve working methods and facilities
- Revising standard piping material specifications, valve material specifications time-to-time.
- Updating Technical Specifications for Piping Items.
- Revising departmental standards and specifications.
- Preparation and revision of departmental quality documents.

PERSONAL DETAILS
Upon request

View contact information...
«« previous resume next resume »»
Search Results (Resumes 1551 to 1600 of 6558)Go to Search Parameters...
Brief Description
I have vast experience in site works and have a good knowledge of soil and rock anchors, drilling and grouting works, cast in place concrete piles, vibropiles, drilling drainage holes and weep holes, thin-wall works, slurry-trench, dewatering, sheet piles, deep excavation, pipeline construction.
Lead Engineer, Shift Engineer, Preventive & Predictive Mechanical Maintenance Engineer
Seeking a position to utilize my skills and abilities in the Civil Engineering Field that could offer professional growth while being resourceful, innovative and flexible.
Pressure vessels, Heatexchangers and tanks designre
Project Construction and Commissioning Coordinator, Concentrating for MD Totco System Mud Logging Systems
Manager, design systems, HSE mechanical service
Bachelor Mech Engg, FEED preparation and review, preparing PMS, piping standards and specifications, developing plot plan, piping layout and isometrics review, piping MTO, MR/PR, bid evaluation, dwg approval, stress analysis using CAESAR-II, Tender inputs for construction
EDUCATION: Bachelor of Engineering in Mechanical from Govt. Engineering College, Jabalpur, India in April 1984 Diploma in Personnel Management from Indian Institute of Management Studies, New Delhi, India in 1987
I am presently working as a procurement coordinator since may 2002. projects include OLG PROJECT in oman and Pearl GTL Project in qatar. Prior to that, i was a quantity surveyor from august 1996 to april 2002
B.Sc. Degree, WellView, DIMS, Drilling and Drilling Fluids Programming, strong computer skills in VB and Office
I have 12 years experience on design and manufacturing industries. Moreover I completed 4 design courses (Stress Analysis, Finite Element Analysis, Structural design, Computer Aided Mechanical Design) and 5 manufacturing (Manufacturing of Composites, Mechanical forming and shaping of metals)
Included in this resume are details of my experience on gas pipelines. I have welding inspection qualifications and have experience of NDT techniques which are used in the pipeline industry. I also have experience of construction on gas pipelines while working for Transco.
* Over 4 years of reservoir engineering experience in USA and Canada * 8 years of petroleum engineering/well completion experience in China * Expertise in using BOAST 98, SGM, ECLIPSE and IMEX
Results oriented, highly focused professional offering over 14 years of experience in oil & gas research with strong working knowledge of lease terms and provisions. Proven team leader committed to reaching company objectives
Am a chemical Engineering Graduate with 6 months work experience at Kaduna Refining & Petrochemical Company. A Safety expert & a plant operator. posses good team spirit & can work under pressure.
7 Years of Professional Experience in Industrial Automation (LNG, Oil & Gas and Pharmaceutical)
A Bsc in chemistry with a wide range of experiences in the mud &work over and completion fluid engineering. Able to work on my own initiative and as part of a team. Proven leadership skills involving managing, developing and motivating teams to achieve their objectives. Presentable, dynamic, adapt
Working as an Electrical technician in Gas purification plant, dealt with zone classified equipments,experience of UPS,PLC,Switchgears,power generation,well head solar control,CP system, fire pumps control,different projects,CMMS,RCM, I have B.Sc (Bachlor of Science) and DAE of ELECTRICAL
4 yrs experience as Pipe Stress Engineer for the Oil and Gas and Petrochemical Industry
Proactive multilingual HSE Advisor/Trainer with 7 years onshore experience in multicultural working environment. Strong interpersonal and presentation skills. Team player with abilities to develop safety programs conducive to results.
Coiled Tubing Engineer with strong background in wired coiled tubing applications (E-Coil). Competently served as Coiled Tubing Technical Engineer, Operations Supervisor (personnel & equipment logistics) and Senior Coiled Tubing Engineer. Working knowledge with industry standard software.
Bachelor's Degree (4 years) in Civil Engineering, Construction Engineering, Design and Engineering, Mechanics,Hands on experiance in STAADpro 2006, MathCAD-12, AutoCAD, Smart Plant Review Soft, MS Office
Chemical engineer with storngpetrochemical operational background,strong analytical ability,rich experience of percommisioning,commisioning ans startup of plant,was involved in major debottlenecking of the plant
Major expertise are as follows Stress analysis in CAESAR-II software for static and dynamic load cases (viz. Static, Wind, Modal, Analogue, Safety relief, Slug flow and Seismic Analysis). Engineering of pipe support including spring hangers.
Geophysicist Engineer./ Reservoi -Petrel- Modeller
Ensure accuracy, programs are to exist for the inspection, testing, calibration, and routine maintenance of measurement equipment and adequate records are to be kept
Production Planning & Scheduling / Coordination Engineer
MSc in Petroleum Engineering, simulation, reservoir engineering, welltest
12 years experience in industrial and general maintenance field.
AutoCADR2004, SolidWorks-2005/2006 & IDEAS V9.1 (3D Master Modeling in Design & Drafting), Microprotol® V32.0 (Software package for Mechanical Design & Strength Calculation of Pressure Vessel & Heat Exchanger), PIPENET (Software for Hydraulic Calculation), KYPIPE (Software for Low Pressure Sewage
site manager at syrian gas company
B.Sc. in Civil Engineering from BUET, Dhaka, Bangladesh having 10 years of experiences as a practicing engineer particularly with consulting and construction works. working experience with national and international consultants.worked in Road,bridge,subsoil investion an glycol gas plant project
Electrical/Instrument Construction-Field Eng, 25yrs+ on/offshore oil & gas project experience.
Structural engineer
Drilling Engineer, 14 years experience in drilling / supervision on Algerian oil & gas fields. Database administration skills.
18 years of experience in operation and commissionng of oil&gas,refinary and petrochemicals.
Chemical engineer. 19 years experience in ammonia, syngas, Hydrogen, HyCO Plants
A Bachelor of Science in Electrical Engineering and a Bachelor of Science in Mechanical Engineering graduate, a license Electrical Engineer with over 18 years experience in power plant operations, testing and commissioning of coal fired thermal power plant and nuclear power plant.
Having 15 years of extensive experience for Planning & Scheduling work in Petrochmeical & Oil Industry.
Analyser engineer with 15 years experience
Experience in the field of piping-oil and gas refinery,chemical plants,working with mnc
B.Sc in mech. engineering, more than 15 years experience in the field of water desalination and power generation.Contract administration, material procurement, inventory control, operation and maintenance of steam/gas turbine, boilers and associated equipments.
Triconex Engineer with 15+ Years Experience.
I am basically an Instrumentation Engineer from India, I have worked in the field of process industries in India. I am working in saudi Arabia as control system engineer. I have worked with BMS, Scada, DCS, CCMS control systems. Also I have worked for the installation of UPSs of 1KVA to 500KVA UPSs
12 Years experience in Design & Detailed Engineering of Piping Systems for FPSO, Fixed Platform, Oil & Gas, Refinery, Petrochemical & Fertilizers plants . Currently working in Hyundai Heavy Industries (HHI) in South Korea as Manager (Piping).
11 years working as NDT& Welding Inspector , highly familiar with : ASME, API, ASTM, ANSI and AWS D1-1 codes and standard.
HSE /SAFETY -Engineer /Specialist /Advisor /Officer - with 7 years of experience in Oil & Gas
Process Engineer in WorleyParsons, a leading global company working in oil and gas industries. Briefly, my job description includes performing PFDs, PI&D, Safety review/approval, process simulations, equipment sizing, process calculations, and optimization and conceptual studies.
Directilnal Drilling
Diploma In Electrical Engineering - Worker's Institute of Technology
First   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   [ 32 ]   33   34   35   36   37   38   39   40   41   42   43   44   45   46   47   48   49   50   Next   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help
» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email
» My Account
» Log In
» Log Out
 
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com