Resume - Experienced on all refinery products and intermidiates. Competent assessor for I...

Misco Jobs

Resume #34657

CONTACT INFORMATION:
View contact information...

Subject: Application for the post of "Chemist-Oils"

Apropos to your advertisement on your website, inviting application for the subjected post, I the undersigned would like to offer my candidature for the same. Attached herewith is my curriculum vitae for your kind perusal.
Sir, I am a post-graduate in Chemistry and Marketing, with Twenty years experience in Quality Assurance Laboratory of Bharat Petroleum Corporation Limited, with five promotions. Last Fifteen years working as Management Staff at various capacities in laboratory.
Worked in all sections of laboratory. Also looking after maintenance of laboratory instrument and material requirement of laboratory. Quality management of laboratory is also part of my job.
I am trained on LIMS at Labsystem, UK and thus was a member of LIMS implementation team. Looking after administration for LIMS in coordination with Computer systems as additional responsibility.
I am qualified as technical assessor for ISO/IEC 17025 (Laboratory Quality Management System) and appointed as a technical assessor by National Board for accreditation for Laboratories, Government of India. So far I have conducted 22 audits of various industries.

Sir, given a chance to work with the esteemed organization, I assure you that, I shall work diligently & creatively to prove myself as an asset to the organization.
Thanking you in anticipation,
Yours truly,

CURRICULUM VITAE

QUALIFICATION
M. Sc. (Chemistry), University of BombayB.Sc. (Chemistry), University of BombayM.M.M. (Marketing), University of Bombay

EXPERIENCE
Working with Bharat Petroleum Corporation Limited (Oil Refinery) for last 20 years, in Quality control laboratory at various positions with five promotions. Last four years working as Area Incharge. Following is the brief description of overall experience.
Details Analyzed independently, all Petroleum products, Refinery intermediates, Crude oils, Catalyst for various tests as per IP/ASTM/SMS/UOP/BIS Standard test methods.Worked on modern state of the art instruments like GCs (includes models Hewlett-Packard, Perkin-Elmer &Chrompack) UV-Visible spectrometer, XRF Spectrometer, S (Microcoloumeter) & N2 (Chemiluminescence's) analyzer, KF Titration, Flame photometer, Atomic Absorption Spectrometer, Auto titration, BOCLE, HFRR, NIR Octane Analyzer, HPLC, CFR engines for RON, MON & Cetane Number, BOD/ COD, Oil in water analyzer and various other automatic instruments carrying ASTM/IP Tests.Analyzed Petrochemicals like Benzene, Toluene, MTBE, Hexane C3-C4 Streams and various types of Naphtha.Evaluated Crude Oils for quantity and quality parameters of potential products using Oldershaw manual apparatus as well as Fishers 800 AC /860AC Auto TBP / POTSTILL Instruments.Water testing: PH, Conductivity, various anions/cations, COD, BOD, Nitrogen, phenols, TS,TDS,TSS, Oil etc. as required for Boilers, DM Plants and Effluent treatment plant.

CAREER HISTORY
Dy.Manager Q.C. (Area In charge) (2000-Till date) Responsible for overall functioning of fuel laboratory, which includes all products, intermediates, technological samples testing and reporting.Reporting to Manager Q.C. and all shift officers, one Q.C.Officer, 36 Analysts and 8 Operators are reporting to this position.Responsible for day to day activities pertaining to testing in Fuel laboratory,Aviation laboratory, Engine laboratory and Water analysis.To liaise with operation /Technology for dealing of special testing required due to trouble shooting, tech studies etc.To guide the Officer in technical evaluation of offers for instruments,& chemicals.Reviewing of sample schedule and product specification as and when required.Establishment of new method with validation & calibration Responsible for quality Documents / Records as per ISO system requirement. Looking after smooth functioning of laboratory jobs.Liaison with outside bodies likes ONGC, BIS, NCL, ERTL, IDEMI,MPCB, NABL, DGCA, DGAQA, CEMILAC and Vendors Training to staff for testing, establishment of new tests, system requirement.Working as training faculty to our training center and outside.Responsible for total ISO- 17025 System requirement and achieved the accreditation in 2003.

Sr.Q.A.Officer (1994-2000) (during this posting worked in all three section of laboratory)Allocation of jobs to subordinates, scrutinize the results and reporting to operations.Detail study of Test Run samples & reporting to Technology Dept. Preparation of Laboratory Reports, Tech Study Reports, Crude analysis Reports etc.Pollution control (Air/Water/Solid) is also part of my job.Looking after maintenance and servicing of Lab instruments.Installation & commissioning of new Instruments in laboratory / Training to subordinates on the instruments.Maintaining Laboratory stores, which includes Glassware, Chemicals and Spare Parts of Instruments.Preparation of manuals as required for ISO 9002/ISO14000 Certification and maintaining the quality documents.Calibration of all Instruments /Test methods and maintaining the records.Looking after administrative jobs of Laboratory, on the job Training to subordinates and overall problem solving.
Shift Officer (1990-94) Allocation of jobs to analysts and operators.Acting as shift in charge of laboratory. To get all the products, intermediate streams and water samples analyzed through Analysts.Get the results and scrutinized those results and report to the respective plants.Preparation of Quality certificate and laboratory reports.Overall problem solving and administrative jobs in shifts.

ANALYST "A" (1988-1990) Analysis of products, intermediates, crude oils, gases etc.Complex testing likes RON & MON Test on gasolines.Working on Gas Chromatograph and state of the art sophisticated instrumentsPreparation / Standardization of standard solutions.Carrying weekly correlation of instruments / test results.Safety checking and maintenance of instrumentsCarrying Calibration Of instruments.

ANALYST "B" (1986-1988) ANALYST "C" jobs and additional testing of ATF, MS, Benzene, Toluene, MTBE and Bitumen products.Analysis of water ex. D.M. Plant, Boiler House, MINAS Plant and Captive Power Plant Registration of samples received in laboratory and retention / removal of samples.

ANALYST"C" (1984-1986) Carry out the analysis of various products according to ASTM / IP / BIS standard test methods.
Products Handled LPG, Propane-propylene, Food Grade Hexane, Solvents, Naphtha, Handled Motor spirit, Kerosene, ATF, Turpentine, Diesel, Fuel oil, LSHS, Bitumen, Sulphur, Benzene, Toluene, MTBE etc.
Unit's Served Crude Distillation, Cat Cracking complex, Aromatics (Benzene & Toluene), Vacuum Distillation, Catalytic Reformer, New Solvent unit, Diesel Dehydro Desulphurisation, MTBE unit, Hydrogen plant, Hydro cracker, Sulphur recovery unit, Scheduling & Blending, Boiler house, D.M.plant and MINAS Water treatment plant. Tankages etc

COMPUTER KNOWLEDGE
Experience on MS Office - Word, Excel, Access and Power Point. Trained in UK on LIMS package.

COURSES COMPLETED:
Principles of Gas Chromatography University of Mumbai
Introduction To Computers APTECH, Mumbai
Laboratory Management System Auditor, ISO 17025 NABL, Delhi
Lab Information Mgmt System Software LabSystem, UK
Instruments Integration (YUCON) LabSystem, UK
Calibration of Instruments IDEMI, Mumbai
Personality Development BPCL, Mumbai
Operation Technology BPCL, Mumbai
* NABL Assessor Course ISO 17025 IIQM, JAIPUR
Assertive Behavior BPCL, Mumabai
Uncertainty Estimation ERTL & NABL Mumbai
Proficiency testing NABL & CII, Pune
* NABL: National accreditation board for Laboratories affiliated to APLAC

RECENT ACHIVEMENTS

ANLYTICAL:
1) Developed various analytical methods as & when required by our laboratory (e.g. Methanol in water, Benzene in MS, Benzene in FGH, C4 & Lighters in Crude Oil, Oil Content in water by spectroscopy etc.)
2) Developed different applications of available instruments in laboratory (Purity of Benzene, Toluene, MTBE etc.)
3) Suggested & implemented various ideas to save cost and manpower (Chemical Storing, using specialized reagents, Pen bath, VP Gauges etc.)

QUALITY SYSTEM
1) Prepared calibration procedure & record manual for QA Laboratory for ISO-17025
2) Prepared quality annual for QA Laboratory for ISO-17025
3) Provided basic system information for QAL operating manual for IS0 9001
4) Procured all standard calibrated equipments & chemicals as required by ISO-17025 calibration of in use laboratory equipments and instruments.
5) Maintained all QAL documents for last five years for ISO-9001system.
6) Worked as trainer for ISO-17025 quality management system to create awareness in employees.
7) Qualified as Auditor for National Accreditation Board For Laboratories (NABL: ISO 17025 Quality Management System)

POROJECTS
1) Developed a complete project of Laboratory Modernization & up gradation of Our company.
2) Prepared internal design as required for the modernization project with the help of outside consultant.
3) Selected required state of the art sophisticated instruments for procurement.
4) Prepared specifications for the instruments, Technically evaluated the offers of the instruments and installed / commissioned the instruments.
5) Obtained training for LIMS (Lab Information Management System) package at M/s Labsystem, UK.
6) Prepared & loaded all static data as required for LIMS software.
7) Trained the employees about applications & use of LIMS software.
8) Deal with M/s. Process-biz for development of web page of laboratory.
9) Deal with M/s. Process-biz for online Q.C./REPORT generation through LIMS database to avoid extra license

Present Salary Indian Rs. 75000 per year + Housing + Facilities
Expected Salary 60000-70000 US $ per year
Present Location Mumbai, India
Preferred Laocation East Asia/ Middle east

INSTRUMENTS HANDLED

Instrument Model Manufacturer Technique
Potentiometer PHAN Indian Potentiometry
"S"Analyser LAB X 3500 Oxford Instruments XRF Spectrometer
"S"Analyser LAB X 3000 Oxford Instruments XRF Spectrometer
"S"Analyser 825R-D/856 Houston Atlas Instrument Rateometric-colorimetry
CFR Engine for RON/MON 1954 Model Waukesha Instruments Single cylinder/ Compression
Spectrometer GBC 916 GBC Scientific Spectrometer
Spectrometer GS 865 D INDIAN Spectrometer
Photometer SQ 118 WTW, Germany Spectrometer
Tintometer PPF990/P Lovibond Colorimeter
Distillation-Manual Walter Herzog ASTM D 86/ IP 123
Distillation-Automatic MC 628/627 Walter Herzog ASTM D 86/ IP 123
Viscometer-Manual INDIAN ASTM D 445
Viscometer-Automatic MC 490-491 Walter Herzog ASTM D 445
Penetrometer-Manual MK V1 StanHope -Seta IP 49
Penetrometer-Automatic PNR 10 Petrotest IP 49
Pour Point-Automatic CPP 97-6 ISL, France IP 15
Pour Point-Manual Simple bath INDIAN IP 15
Bending Apparatus Kohler IP 80
BOD Instrument TS 606/2 WTW Germany Oxytop
Densitimeter DMA 248 Anton Par Hormonic Oscillation
Densitimeter Portable DMA 35 Anton Par Hormonic Oscillation
CFPP MC-840 Walter Herzog IP 309
WSIM 1140 Emcee Electronics ASTM D 3948
Flash Point MP 329/MC 305 Walter Herzog PMCC/ABLE
Freezing Point SC 860 Walter Herzog IP 16
OIL Content OCMA 3000 Horiba Inatruments Near IR
Softning Point RB 36 ISL France IP 58
Turbiditimeter 300 T Merck, Germany Turbidimetry
"S" Analyser Euroglass-1200 Euroglass Coulometry
"S" Analyser Euroglass-3000 Euroglass "UV Absorbance'
ATF Lubricity BOCLE VTU BOCLE
HAS Lubricity HFRR PCS Instruments HFRR
Gas cromatograph 5880 Hewlet Packrd Capillary Column
Gas cromatograph 5880 Hewlet Packrd Multicolumn GC- RGA
Gas cromatograph 5890 Hewlet Packrd Multicolumn GC-PONA
Gas cromatograph 6890 Hewlet Packrd Capilary GC-DHA
Gas cromatograph CPA 1000 Chrompack Capillary Column
Gas cromatograph 1115-Auto XL Perkin Elmer Multicolumn GC- RGA
HPLC Series 200 Perkin Elmer PAH of diesel
"N2" Analyser DN 110 MCI Total nitrogen content
KF Coulometer DL39 Mettler Total water content
KF Titrator DL18 Mettler Total Water content
CFR Engine for Cetane no. Waukesha Instruments Cetane number
Benzene in MS Chemito GC Chemito Intruments Benzene in MS
Oxygenates in MS Chemito GC Chemito Instrument Oxygenates in MS
Benzene Purity Chemito GC Chemito Instrument Benzene Purity Analysis

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1 to 50 of 6899)

Go to Search Parameters...

Brief Description

Free! Petroleum Engineer with 12 years of progressive experience gained from active involvement in all phases of oil and gas exploration and production(Deep Water and Onshore. Vast experience in Well and Reservoir Surveillance, Integrated Production Systems Modeling, Production Engineering and Technology

Free! Qualified safety professional with proven national and international track record, demonstrated, through a successful 11-year safety and health management career, his ability to lead poorly performing facilities to top quartile performance.

Free! Planning / Scheduling,Project engineering,Subcontracts administration,Primavera, Open Plan,MS Office,Pipeline design/construction/replacement

Free! 15 years plus of domestic North Sea and international experience in the Petroleum Industry. These facets include oil and gas production and exploration (drilling), petroleum refining, chemicals and power generation. Areas of expertise include plant operation, construction supervision, and commission

Free! Experienced Supervisor in the Electric Submersible Pump Industry

Free! As an ambitious, inquisitive, self motivated engineer, I have been working as a workover & completion engineer since 2004. Cementing, acidizing, fishing, drilling, offshore gas well completion, deep shore well completion are the main subjects of my experience.

Free! Geoscience professional including experience on 3D seismic interpretation on Landmark workstation. Also experienced industry negotiator with particular experience in unitisation and marginal fields farm-out negotiations. Good at team working and cross-cultural interactions.

Free! If you are seeking a project expert in the energy, oil, and gas industries, who brings a comprehensive background beginning in on-site project management, and expands into in-country executive, driving new business, contracts and client relationships. I would be an excellent candidate for your consi

Free! HIGHLIGHTS: Geology, Oil sands, Heavy oil and bitumen recovery, Drilling, Well logging, Advanced Petroleum Technology; Methodical, efficient thought procces, positive and professional attitude, job task planning and organizing

Free! A highly skilled Senior Inspector Welding/Construction Supervisor with over 30 years as a specialist in the fabrication industry in Europe, The Middle and Far East.

Free! I have been working in this field for over 10 years now. Done work in both maintenance and construction in the past. In dealing with the Start-up/Commissioning of various projects, I have gained knowledge of Computer control systems, DCS, PLC, Pneumatics and dealing with customers one-on-one.

Free! Helicopter view, fast analysing, creative in finding solutions, mind setter for safety

Free! Instrument Engineer and technician with 27 years experience in design, installation, commissioning, start-up, operations and maintenance of oil and gas facilities worldwide.

Free! 19 years in Oil and Petrochemical with Project Management, Commissioning and Maintenance/Reliability background as well as all associated mechanical equipment and safety system. BS in ME and MS in Engineering Science. in English and Mandarin.

Free! Experienced Safety engineer, CSP. Bilingual Spanish/English. Authorized to work in the European Community.

Free! Experianced in budgeting and planning, Experiance in leadership and mentoring of apprentice instrument hands,

Free! 15+ years experience HSE oilfield operations. Experience includes seismic, drilling, completions, construction with extensive exposure to heli-portable. Experience in North Africa, all areas of Canada including Artic. Client rep for large oil/gas producers.

Free! E&I Supervisor with 28 years service in all divisions of the electrical industry

Reservoir Engineer, Heavy Oil Recovery, EOR, Production Optimization, Simulation Studies

Twenty years instrument and control systems experience includes positions as: lead instrument and control system engineer on onshore and offshore design and construction projects for oil and gas plants, refineries, pipelines and chemical plants

I am NACE Certified corrosion specialist, fellow member in the institute of corrosion. I have BSc and MSc in chemical engineering and PhD in corrosion engineering with long experience in R&D, oil and gas industry.

QA/QC (PIPING & WELDING), CSWIP 3.2,

As a Principal Process Engineer supervised and executed over 20 basic engineering designs (grassroots and revamps) of ethylbenzene, and styrene monomer units. Participated in 6 startups, 5 of which overseas. Also supervised or participated in numerous technical proposals and feasibility studies.

Ammonia, LPG/LNG, freon, electrical and water systems

I am Nace certified Coating Inspector Level 3 & ACA Certified Corrosion Technologist . My basic qualification is B.Sc.( Che), Mechanical Engineer I am having Total 24+ yers of experience in the field of Coating. 10 years in Oil & Gas Inspection on offshore & Onshore

Instrumentation and control engineer and instructor Phd neural fuzzy modelling and identification, optimization using genetic algorithms

21 years experience in corrosion engineering, monitoring and applying corrosion mitigation strategies to oil/gas/petrochemical industry. Detailed experience in cathodic protection (CP), pipeline integrity, chemical treatment, corrosion monitoring, coatings and corrosion/mechanical damage assessment.

21 Years Experience of Process Engineering in Refinery/Oil & Gas

A geologist currently working with a major oil companies, specialized in reservoir characterization, formation evaluation, operation geology and geosteering in clastic reservoirs. Develop expertise while working in Australia, Saudi Arabia, North Sea, India and several other international projects.

Professional Mechanical Engineer, Gas Pipeline Engineer, Metering Station Engineer, Project planning and Control Engineer, Project Engineer, Drilling Engineer, Project Manager

My skill in maintenance and repair of heavy equipments,compressors and pumps

Reserve Management, Project Economics,Exploration Risk Analysis, Acquisitions

I exerted with different degrees the most of geophysicist tasks and particularly the supervision of seismic processing and interpretation projects. I am particularly interested in the static corrections in dunes areas. I have a personal work on the subject that has yielded good results

Petroleum Geologiwst, oil and gas exploration and production, geologic mapping

Bachelor Science degreed as Civil Engineer with 23 years of professional experience in different job positions in petrochemical, fertilizer, power plant and open coal mine, related with design, engineering, construction and maintenance of reinforced concrete structures and steel structures.

Engineer - Geologist of Oil and Gas Exploration

Senior Production Technologist

I hold the B. Sc. and Master’s degrees in Geophysical Engineering from Polytechnic University of Tirana (1977), Albania. Thirty years of diversified experience in well logging, administrative projects, and quality control. Providing petrophysical support to the integrated study

30+ years of EPC and consultancy Process experience. Conceptual design, Simulation (Hysys / proII) of oil & gas and refinery processes. Expertise in oil & gas gathering stations, gas sweetening, dehydration; Water treatment and injection systems; NGL units employing Turbo-Expanders; Refinery units.

More than 30 years experience in civil structural design, consulting and supervision in upstream, downstream, and pipeline of oil and gas fields

Experienced on all refinery products and intermidiates. Competent assessor for ISO 17025

Indian, working for U. S. Dollar Seven hundred twenty million hydro-carbon handling project in NIGERIA and received excellent employee award Seeking Director / ManagerHSE/Environmental/Civil Education: Ph.D. (IIT Bombay) and Safety Diploma

Designing , Praparation & Checking of high pressure transmission pipelines

„w Trained competence through training in Electrical Design Software Analysis (EDSA) and Project Management Techniques

Petroleum Reservoir Engineer,

Experienced in multidiscipline project engineering.

Senior Mechanical Equipment Engineer, 23 years in LNG, Oil, Gas and Petrochemical with Project Management, Commissioning and Maintenance/Reliability background for heavy gas turbines, compressors, turboexpanders as well as all associated mechanical, instruments,electrical equipment and safety system

More than 28 years as a Petroleum/Reservoir Engineer in Exploration and Production Company with heavy emphasis on reservoir management: India (Oil and Natural Gas Corporation Ltd.), Kuwait (Kuwait Oil Company), Abu Dhabi (Zakum Development Company) and Oman (PDO-Shell).

Project Manager with 26 years experience managing Oil and Gas FEED, EPC, PMC, EPIC, and EPCM projects . Responsible for Senior Project Engineers, Contracts Administrators, Project Controls Engineers, Safety Engineers, and QA/QC personnel. Worked with and managed expatriate and multi-cultu

I am a graduated, experienced, professional marine engineer. 29 plus years of valuable engineering hands-on experience in the Maritime and Offshore Industry.

First [ 1 ] 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out