Resume - Extensive 20+ year’s professional experience in instrumentation, control and aut...

Misco Jobs

Resume #36465

CONTACT INFORMATION:
View contact information...

OBJECTIVE:
Instrumentation & control engineer, in oil / gas and petrochemical industries.

Summary of Qualifications and Skills:
* Experienced in diverse oil and gas process types, from gas separation & treatment. Tank gauging, metering and proving systems, pumping stations, to oil exporting terminals. Also power generation and distribution low / medium tensions, RO units, water treatment and injection, machinery, HVAC systems, Salt washing plant, Ethylene plant & cryogenic storage
* Knowledgeable in PLC's and DCS. Conversant with ModBus, FieldBus and HART protocols
* Thorough field engineering skills, plus classified hazardous area installation & maintenance.
* Versed in measurement, instrument calibration, state of the art Calibrators & test equipment.
* Proficient with computers hardware, software and applications.
* Qualified problems solver, dependable team player/leader, attentive to details and accuracy.
* Engaged in every phase of engineering, procurement, planning, maintenance, supervision & consultancy ; from new equipment specifications, selection, installation, to design review, commissioning, start –ups, testing, reverse engineering and retro-fitting.

EMPLOYMENT HISTORY:
Senior Instrumentation and Control engineer. (RASCO- Ethylene plant)Libya, 1998-2005. For Producing & storing of 330 KT/Y Ethylene, 171 KT/Y Propylene, 130 KT/Y C4 Mix.
* Carried out cost effective preventive and corrective maintenance, troubleshooting & repair.
* Designed and recommended modifications, upgrading and revamping projects, to improve efficiency and productivity such as:
- Revamped cracked gas compressor Vibrations & Temperatures System to Bently Nevada Series 3500 system.
- Utilized Coriolis mass flow meters, Micro-Motion from Fisher-Rosemount, ABB Trio Mass & Yokogawa Vortex meters & InduSoft Web-Studio HMI/SCADA for materials balance system
* Integrated high technology with traditional equipment such as:
- Upgraded Transmation 990Z temperature monitoring system Data General NOVA Eclips to National Instrument DAQ and Bridge View system for about 2000 Tags.
- Replaced LNG compressors alarm and annunciators panel in Cryogenic storage Area.
* Completed design and drawing review, installation, commissioning and testing of ethylene refrigeration screw compressors units (UDEC) in Cryogenic storage Area.
* Revised design and modified ethylene tanks relief / breather system in Cryogenic Area.
* Had responsibility for instrumentation and control Turnaround and start up activities biennial 1999, 2001 and 2004 for ethylene plant, and 2002 turnaround for Cryogenic area.
* Innovated instrumentation Work Shop by new tools and state of the art test and calibration equipments with Cornerstone calibration management software package.
* Improved efficiency, productivity and leverage performance and standard through training of five engineers on equipment and systems operation and maintenance.
OJT Trainer, Marsa El-Hraiga Oil Terminal, Maárfa Co. and AGOCO, Libya 1996 – 1997
Five jetties for exporting crude oil and others oil products, in Tubruk.
* Carried out trainees & job evaluation, tasks and skills analysis, objective and achievements.
* Performed professionally OJT activities accordingly. Evaluated the results and conclusions.

Consultant engineer, Safi Salt washing plant & Aqaba terminal, CCIP, Jordan, 1995-1996
Producing and exporting 1.2 MT industrial salt and 30 KT refined table salt annually.
* Performed persistently specifications and design review, site modifications, documents and drawings check and approval for instrumentation and electrical equipment and systems.
* Supervised proficiently erections, installations, testing, start up, commissioning and snag list preparation, handing-over instrumentation, control & electrical systems for Arab Potash Co.

Engineering services lead engineer, SOC (South Oil Co.), Basrah, Iraq, 1989 – 1995, for producing and exporting 2.250 MBBLPD crude oil and most associated gas.
* Had responsibilities for operating, maintaining, designing, projects, planning and budgeting the engineering services activities such as:
- Instrumentation & precision equipment central workshop includes PC's, office automation, fire & gas detection systems, wells test separators and degassing station instrumentation.
- Supervised electrical central workshop and electrical distribution medium and low tension.
- Managed general repair and machinery workshop, mobile machineries and equipment.
- Supervised the HVAC systems and Air conditioning central workshop.
- RO units, water treatment, pumping stations & more than 500 km (4 to 36 IN's) pipelines.
* Rehabilitated equipments, systems and installations for South Oil Company.
* Involved in many committees and projects feasibility study groups.
* Participated in many projects as site / project engineer for south oil company.

Area instrumentation engineer SOC / Basrah / Iraq, 1983 – 1989, Cadre 6 engineers and 40 technicians.
* Maintained and supervised SCADA systems for offshore terminal and Iraqi strategic pipeline 2 X 42 inches 800KM, oil depot, main pumping station PS1 and booster stations PS2, 3 & 4.
Includes Electrical system distribution medium/ low tension & emergency power generation.
* Maintained and supervised Toshiba TOSBAC ACOS-600s computer systems.
* Maintained and supervised Instrumentation workshop, test separators, degassing& pumping station 0.4 MBBLPD Crude oil & light condensate separation project mechanical completion.
* Designed, approved modification and budgeting for above systems.

EDUCATION:
B.Sc. in Electrical Engineering, Basrah University, Iraq.

TRAINING COURSES:
* Canada Calgary / SAIT Polytechnic, Courses in DCS; Bailey NET90, Delta V, and Allen- Bradley PLC-5 Applications.
* Canada, Calgary / CCIS, Employment Communication workshop.
* USA/ Brown & Root Inc., TRW Controls Co., Data General Corp., Grove valves Co., S&R Tools, Maintenance Mechanical Corp., and FMC Chicksan, for offshore terminal equipment & systems.
* Iraq / Oil Operations Comp. / instrumentation and control systems for degassing, water pumping and injection stations included CLARK, GEC and RUSTINE gas turbines control systems.
* Norway / Kongsberg + NATCO/ VIKING KG2-3 gas turbine generator and Ingersoll Rand, JP-180 Gas Turbine (OJT in Basrah) Electro-Mechanical course and OJT,
* Japan / Toshiba / TOSBAC ACOS-600s computer systems. Maintenance package and OJT.
* Japan / NEC + DEC/ remote control system / south Iraq LPG project / SCADA & computers.
* Iraq-Baghdad/ supervisory skills and Management Skills Courses.
Complete list of courses and certificates available upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 951 to 1000 of 7051)

Go to Search Parameters...

Brief Description

Production Completion Engineer

I am Vasu Jajala working in Shell Nig.Ltd. As a Construction Instrument Supervisor. I have 16 years plus of practical experience in the field of Process/Machine Control Instrument of Offshore & Onshore, Petrochemical, Petroleum refinery, Oil/Gas and QATAR LNG industries.

A proactive and analytical Mechanical Engineer with over 12 years experience of Working in a Multinational and Multi cultural work environment in fabrication operations, welding processes, project management, quality / process enhancement ,maintenance with highly regarded organizations.

Over 15 years of relevant experience in Mechanical Engineering and management. Over 5 years of technical authorship in Oil & Gas Industry. Extensive knowledge of machinery, equipment and heavy duty vehicles, maintenance and repair strong practical skills and managerial abilities.

sedimentologist with 16 years of experience in siliclastic and carbonate rock:core descripton, petropgraphic analysisand diagenesis interpretation

Professional Geologist with over 16 years worldwide experience working for major operating companies in asset management/development teams, exploration and production. Worked on a wide variety of clastic and carbonate reservoirs. Key competences are listed below.

Sr. Piping Designer - CadWorx/AutoPlant

An ambitious and highly skilled Petroleum engineer with extensive experience in reservoir engineering, well testing, reservoir fluid analysis, ISO certification, production, management, product development and launch, and customer support.

Contracts specialist with Engineering background having more than two decades experience in both Operating and Contracting companies.

Piping Design Engineer with 15 years of international experiences in the EPCM environment. Performed at a various level in the engineering design to construction site for oil sands projects, refineries, petrochemical, pump station & pipeline, and onshore facilities.

Senior Reservoir Engineer with 15+ years of broad based international experience gained in reservoir simulation, field appraisal, field development planning, reservoir surveillance, reservoir management, wellsite operations and working in integrated multi-disciplinary study teams.

Graduate, Electrical Engineering Degree Holder, Working In Indian Petrocehmicals Corporation, India Since Last 19 Years - As A Senior Technician (Supervisory Post)

Senior process engineer upstream oil and gas design consultancy. Ammonia plant operation manager. Process engineer for chemical petrochemical plants

Reservoir Engineer

PDMS Instrumentation Designer

Well experienced in the field of Mechanical maintenace of rotating equipments like compressors, pumps,turbines in Petrochemical and Oil & Gas Industry in India and Middle East. Worked with Shell affiliate NOCIL in India, Reliance India and Sabic, KSA as Mech.Technician & Supervisor.

QA/QC Engineer in onshore oil field with ASNT Level -II in UT RT PT MT . M.TECH and B.TECH in Mechanical Engineering.B.TE

Electricial technician now i am working in mask oil qatar

PDS(2.5Years),SmartPlant,Navisworks,MicrostationV7.1(3Years),AutoCad2006(5 years),MS-Office

Skill: 11 Years Structural designer ( Including 2 Y rs. in PDMS , 2 Yrs. in PDS & Micro-Station ,3 Yrs. in X-Steel , 4 Yrs. Auto-Cad ) Qualification: B.E Production Engineering - First class – April 2009 – MIT Anna University, Diploma in Mechanical Engineering – First class - April 1998.

I start my profession life from Techno Agriculture when I done Agriculture machinery repairing. After that I went to Saudi Oger and work on Hydraulic

Total 7+ years of experience in Refinery, Petro chemical, Power Plants (steel & RCC structures) and Industrial Buildings.

Project Engineer with filed experience in Marine industry, oil & gas and renewable energy industry

A qualified mechanical engineer having a litany of professional courses with 11+ years of extensive track record in heading key engineering divisions and technical operations/maintenance, across diverse geographical locations in the Oil & Gas industry, seeking a managerial/engineering position with

Rock physics / Petrophysics

“Petroleum and Gases” University Ploiesti, Romania

Over 6 years of experience in analysis and design of steel and concrete structures

15 Years Geospatial Experience. Oil/Gas, Pipeline Design/Engineering, Land Management, Geospatial RDMS

I am an Instrument Designer with more than 25 years experience, predominantly in the Oil and Gas Industry. I have extensive supervisory experience in multi-discipline and multi-national working enviroments.

Lead Auditor - ISO 9001:2000 Series; CSWIP 3.2 Senior Welding Inspector; CSWIP 3.4 Radiographic Film Interpreter for Group A & B materials; CSWIP - BGas Grade 2 Painting Inspector; 28 years of oil and gas industry experience both onshore and offshore. 5 years Refinery experience as Plant Inspector.

Talented and accomplished Naval Architect with extensive FPSO, FSO Conversion, Ship Design and Shipbuilding background particularly in the areas of trim and stability, strength of ships and ship structures. Proven ability to design FSO, FPSO and various types of ships. Able to liaison between tech

Well established Petroleum Exploration and System Analyst with over 15 years of experience in the international petroleum industry combined with a PhD in Petroleum Geochemistry.

I am a fully qualified and experienced Health, Safety and Environmental professional with 14 years upstream Oil & Gas industry experience working around the world for International Oil companies

Registered Professional Engineer in Ontario, Canada, Mechanical Engineer BSc. & M.Eng.

Project Management and General Management Professional

Project /construction director/manager FPFO, Jacket and decks, Modules, loading terminals (shallow and deep water)

Has proven ability in design engineering, fabrication drawing detailing, material quantity estimation, fabrication, and installation & commissioning supervision. Familiar with international design codes, standards, procedures, and engineering practices.

Sr. piping design

Professional Civil Engineer with over 11 years of experience in the oil and gas industry focused in the analysis and design of different types of structures, such as frameworks, pipe racks, bridge trusses, operation platforms, vertical tanks supports and their foundation, and retaining walls.

A geologist with experience in the oil industry involving exploration and development projects in Guatemala South Peten basin, geological information database management, mud logging in oil drilling activities, oil tanks gauging(1996-2004). Logging geologist in USA (Nov 2005-Mar 2009)

Experienced and motivated Ph.D mechanical Engineer

Oilfield Experience 34 years. 33 years with Well Services. I began my career as Well services Technician and my last jobs with Well Services as a Team Leader responsible for Slick Line operation in both Gas and Oil wells.

Civil engineer/pipeline precommissioning

multi-disciplined autocad designer

Performing work as per international standards following operational excellence management system

Extensive 20+ year’s professional experience in instrumentation, control and automation for Oil, Gas and Petrochemical industries.

I have sufficient exposure in dealing with International Audit and Inspection like MCA-UK., U.S.F.D.A., MCC - South Africa, WHO Etc. Man Management is my proven skill for years. Maintain focus on achieving bottom line result while formulating and implementing the advanced technolog and productivity.

Experienced Drilling and DHS Supervisor

M.Tech Geo-Engineering, 9 years of proven industry experience in Geology, GIS, RS, Image processing, QA & Testing, Performance Engineering on Financial, Accounting, CRM, ERP, Retail, B2C Web & Client Server applications like ESRI arcGIS, ERDAS, MapInfo, AutoCAD, Java, J2EE & .Net, Data Warehousing

Perform all oil and gas estings, envirmental testings, wwtp testing, utility relating testing, chemical preprations, well testings, auxlery fireman, first aider, isorelating working, hse relating working, master in chemistry,

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 [ 20 ] 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out