Resume - I am Diploma Engineer in electrical and post diploma holder in Instrumentataion ...

Misco Jobs

Resume #36578

CONTACT INFORMATION:
View contact information...

Subject: Application for the post of Engineer (Inst.)

Respected sir,
With reference to above, I enlist my candidature for the same.
I am Diploma holder in Electrical engineering and Post Diploma in Instrumentation and control. I am in Instrumentation field since last twenty-eight years. During the span of 28 years, I have worked in various positions and in various projects in inspection, erection, commissioning and maintenance of Pneumatic, Electronics, Electrical, DCS, PLC instruments in heavy and continuous chemical, petrochemical, Pharmaceutical, Fertilizer, crude oil industries.
I had worked in Indian Dyestuff Industries Limited as Head of the Department since last sixteen years for the maintenance of Pthalic Anhydride (petrochemical division), Cynuric chloride plant instruments. I was responsible for maintenance, procurement of instruments and its spares, erection and commissioning of project/revamping of plant instruments and ISO-9002 activity.

I am well conversent with PLC system, DCS system, Boiler instrument, Air compressor, Chilling plant, Spray drier instrumentation, ISO – 9002 activity and its documentation, audit system.
I also have Electrical supervisor permit.
At present I am Working in Bentini/ Namfatt JV at Sudan (Africa) for the Petrodar operating company Limited, Sudan at Melut oil development project for pumping station 5, Erection and commissioning.

CV

QUALIFICATION:

Sr Name Of Examination Name Of Institute Year Of Passing % Of Marks
1 Radio service work (Two years part time course). Birla visvakarma vidyalaya. V.V.Nagar 1974 55
2 Diploma in Electrical Engineering B&B Polytechnic. V.V.Nagar. 1975 56
3 Post Diploma in Instrumentation and Control. A.V.Parekh technical Institute. Rajkot. 1976 66
4 Electrical Supervisor permit

EXPERIENCE:

SR Company Name & Its Business Position Held & Duration Nature Of Job

1
Modi Alkalies & Chemicals Ltd.
Caustic soda and chemicals manufacturing. Assistant Engineer
25.1.82 to 9.6.85 Worked with M/S UDHE at Mumbai for procurement & inspection of project instruments, erection, commissioning, Maintenance of instruments.
2 Gujarat Lyka Organics Ltd.
Bulk Drug Manufacturing Maintenance Executive (inst.).
13.6.85 to 17.3.86 Erection, commissioning and maintenance of plant instruments.
3 Indian Dyestuff Industries Ltd.
Chemicals & Dyes manufacturing Instrument Engineer.
18.3.86 to 30.03.04 Responsible for department administration, Procurement of instrument and its spares, break down & preventive maintenance. Revamping of Pthalic anhydride & Cynuric chloride plant. Responsible for ISO-9002 activity for instrumentation.
4 SWIL Copper Ltd
Copper plant Engineer
1.4.04 to 1.9.04 Responsible of commissioning activity and maintenance
5 Gujarat Borosil Limited
Glass sheet plant Inst. Engineer 10.8.4 to28.2.5 Project work, Maintenance of plant instruments
6 Bentini-Namfat JV
Crude oil pumping station E & I Engineer
(Inst) March 05 Responsible for erection activity of pumping station instrumentation.
Salary Drawn: $ 1500/ month + perks
Expected Salery: As per company's rule.
Curriculum Vitae

EDUCATIONAL DETAILS:
PDIC: passed Post Diploma in Instrumentation & Control from Technical Examination board with 66% in 1976

DEE: passed Diploma in Electrical Engineering from Technical examination board with 66% in 1975

Radio service work: passed Radio Service work part time two year course with55% in 1975

Electrical Supervisor: I have Electrical supervisor permit

Computer knowledge: MS Office2000 – word, Excel

PROFESSIONAL WORK EXPERIENCE (Total 28 years)
Name of organisation: Gujarat Alkalies & chemicals Ltd.
Designation/Duration: Supervisor 10th Feb78 to 9thJan1982

Name of organisation: Modi Alkalies & chemicals Ltd.
Designation/Duration: Assistant Engineer (Inst) 25th Jan 1982 to 9th June 1985

Name of organisation: Gujarat Lyka Organics Ltd.
Designation/Duration: Maint. Executive (Inst) 13thJune1985 to17th March 1986

Name of organisation: Indian Dyestuff Industries Limited.
Designation/Duration: Instrument Engineer (Inst) 18 th March1986 to 31st Jan 2004

Name of organisation: Tyco – Hoffincons Ltd (Swill copper limited project)
Designation/Duration: Supervisior 1st Feb2004 to 9th Aug 2004

Name of organisation: Gujarat Borosil Ltd.
Designation/Duration: Instrument Engineer 10th Aug 2004 to 28th Feb 2005

Name of organisation: Bentini – N F Energy JV (Sudan oil pump Stn project)
Designation/Duration: E & I Engineer (Instrument) since 3rd March 2005

JOB PROFILE:
At present I am Working in Bentini/ N F Energy JV at Sudan (Africa) for the Erection & Commissioning of instrumentation of crude oil pumping station of Melut basin oil development project of M/S PETRDAR OPERATING COMPANY LIMITED Sudan.
I am Diploma holder in Electrical engineering and Post Diploma in Instrumentation and control. I am in Instrumentation field since last twenty-eight years. During the span of 28 years, I have worked in various positions and in various projects in inspection, erection, commissioning and maintenance of Pneumatic, Electronics, Electrical, DCS, PLC instruments in heavy and continuous chemical, petrochemical, Pharmaceutical, Fertilizer industries.
I had worked in Indian Dyestuff Industries Limited as Head of the Department for sixteen years for the maintenance of Pthalic Anhydride (petrochemical division), Cynuric chloride plant instruments. I was responsible for maintenance, procurement of instruments and its spares, erection and commissioning of project/revamping of plant instruments and ISO-9002 activity.

I am well conversant with PLC system, DCS system, Boiler instrument, Air compressor, Chilling plant, Spray drier instrumentation, ISO – 9002 activity and its documentation, audit system.

Salary Drawn: $ 1500/ month + perks + Accommodation, Food, transport

Expected Salary: As per company's rule

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1551 to 1600 of 7053)

Go to Search Parameters...

Brief Description

E & I Technician

i am an fabrication enginner working with saudi aramco gas oil seperation project as a approved qa qc mechanical supervisor since june 2007

Automation, Instrument and Control Engineer Manager

I have B.S in Mechanical Engineering from Bushehr University in IRAN and I have more than 8 years of experience in Oil&Gas field and Power Plant companies, especially in piping division.

B.Sc.(Engineering) Metallurgy and Materials Science.

Certified Cost Engineer. Graduate Mechanical Engineer with over Eighteen Years experience in preparing Project Cost Proposals / Tendering including Estimation / Quantity Survey, Costing and all related activities. Completed Eleven Years in Gulf (Bahrain).

Fifteen years experience in the area of Seismic Data Processing including 2D and 3D land, transition zone, marine and OBC processing. Specialized areas including demultiple applications, imaging techniques, and Amplitude versus offset.

7-year offshore structural engineer with M.S degree

power system protection engineer with avery good experiance in protective relays testing control scheme troublshooting

Instrument Supervisor

Project Planner/Scheduler (Primavera P3 & MS Project Planning Software, MS Word / Excel). Vast experience in Steel Works Business - Planning, Fabrication / Erection (Storage Tanks & Steel Structures), Gas Plant / Pipelines. Completed Structural Engineering and 4 years in BS Mech'l Engineering.

Maintenance supervisor / Reliability specialist / Project Management

Broad base of experience within the Pulp/Paper, Pharmaceutical/Chemical and Bio-Technology industries involving design, engineering, construction, and commissioning. Management of projects (automation, instrumentation and electrical/instrumentation systems), quality, personnel and resources.

Developing & producing plot plans using PDMS 11.2 (CLS), pipe modelling (PDMS-PMS), Equipment modelling (PDMS-EMS), producing Piping Study & General Arrangement Drawings(PDMS-CAST), Producing Isometrics(Isodraft) & used Review Reality station for reviewing the plant model.

Certified ( Project Controls, AACE, #1366), published Engineer (BSPE and MBA) with over 15 years of direct field experience in Operations, budget design, Inventory control, Drilling Engineering, Oil Well Fire Control, Well design and Turnkey Bid estimates.

Education: Master in Chemistry Various certifications on Drilling Technology and Oil and Gas operations. Worked as Mud Engineer with MI Overseas. BakerHughes INREQ and IDF schlumberger in middle east. Worked as lab chemist with QGPC Qater, Mud Engineer with ADC Saudi Arabia ETC

Pr. Management-Estimating man hours, developing WBS CBS, Progress measurement techniques, monitoring by Primavera, project control, invoicing. Engineering-Prep. basic Instr data sheet, detailed ENGINEERING of DCS, FGS, SDS, control logic, SAFE. Commissioning -Elect system of process platforms

I am experienced in long & short range mine planning, scheduling, budgeting, design of safety procedures & standards, production & destress blasting, mine backfill, ventilation, ground control, geomechanics modeling & design of stable openings (using the bifurcation theory in mechanics).

Senior controls and Scada Systems Analyst

Mechanical Engineer Bsc. Hons. Project Engineer. Commissioning Engineer

Directional Driller with horizontal experience in shale and lime. Also have workover and completion experience,

Piping Stress Engineer

Registered civil engineer with Master’s degrees and 5 years of work experience primarily in structural design

Experience on process design of oil and gas industry units, engineering and tender documents preparation. Well familiar with process codes and standards and design requirements

Piping Engineer

Programming/maintenance of PLC/DCS controllers and SCADA systems. Maintenance of electrical/electronic and pneumatic/hydraulic instrument equipment. Maintenance of fire/gas detection systems (turbines, oil/gas production facilities). Excellent communication and management skills.

I am experienced in Air separation Units (Oxygen plants, Nitrogen plants, Argon plants) and Carbon dioxide plants. I am a plant manager and looking after all the activities involving in mafucturing and selling

I am Diploma Engineer in electrical and post diploma holder in Instrumentataion & control having 28 years experience in petro chemical, Heavy chemical , Oil & gas industries in a diffr\erent position in project, maintenance of instrumentation.

Instrumentation Automation Engineer 9+ Yrs Exp

Seeking very challengeable, risky and more responsible jobs to acquire a technical/management position where engineering experience and managerial skills will significantly contribute to product and process development

Control room operator, commissioning, precommissioning, plant start up, normal shut down, fire and gas, process, production, turbine.

Technical and sound Instrument engineer

15 years in the oil and gas industry including WesternGeco and Halliburton – Landmark Graphics Corporation. Areas of expertise include seismic data management, seismic and well data loading and conversion.

I am a Senior Instrumentation Technologist with 15+ years experience in the Instrumentation Engineering field; and I am well versed in project execution from FEED through to commission and start-up with a strong emphasis on efficiency and safety.

IT , Hysys,English language

Duties and Responsibilities:

Senior coatings/painting inspector

I am an Instrumentation and Control Engineer with a Doctorate Degree. I am experienced in designing and developing advanced controllers

Rotating equipment Engineer

QA/QC Inspection Engineer

Over Eight (8) years of total experience in Process Engineering which includes Basic Engineering, Detailed Engineering for Oil & Gas Offshore (fixed platform) & Onshore Processing Unit, Underground Gas Storage Facilities, Hydrogen Generation Unit, Naphtha Splitter Unit and Flow Assurance Study fo

Electrical commissioning technician / completions

I have spent 12 Years working as a DC Surveyor / Piping Designer in an onshore/offshore environment. Two of the main construction projects that I have been involved in was the BP Holstein and the Chevron Tahiti Spars. I have also spent a substantial amount of time working in petrochemical refineries

Considerable expertise in dealing with corrosion control of oil and gas installations, resulting from over twenty years of relevant experience in upstream, midstream and downstream activities in oil and gas industry.

Control System professional with 18 years experience and PMP and Six Sigma Green belt certified

Acting as QA/QC Manager/Cordinator (Welding, Inspection & NDT), with more 15 years of experience in the Middle East and European Union in the field of Oil & Gas and power piping projects. Experienced in work with multinational engineering companies (ALSTOM. TOTAL, KAVAERNOR¡K)

Experienced Instrumentation & Control system Engineer, interest in Projects, Proposals and Commissioning

Surface and Interfecial Sciences, Condensed Matter Physics, materials Sciences, UHV Techniques, Analytical Chemistry.

I have 12 years experience in drilling oil wells(development and exploration) and operation monitering. I have a bachelors degree in mechanical engineering.

Drilling/Energy Professional, functional/technical business experience on IT, project management, operations, sales, supplier summit, strategic development. Oracle Certified Professional (OCP) DBA and EIT Texas. Strengths - drilling, workover, Petroleum engineering, IT implementation, Oracle

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 [ 32 ] 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out