Misco Jobs  |  Go to Job Seeker's Center »»   |  
 
«« previous resume Resume #37084 next resume »»
CONTACT INFORMATION:
View contact information...

I have more than 12 Years of in depth Experience in the field of Quality Control and Assurance, Supervision, Inspection and Pre-Commissioning of Electrical, Instrumentation and Cathodic Protection Systems for Oil and Gas Plants, Remote and Relief Manifolds, Gas Gathering Manifolds, Wellheads (Oil, Gas and Water Injection) Cross-Country Transmission Pipelines, Trunk lines, Flow lines, Main Line isolation Valve stations, Pump house, Intermediate scraper traps, In-let area, Electrical Sub-Stations and Overhead Power Transmission lines, in accordance with International Technical norms (NEC, NFPA, NESC) Saudi Armco and SCECO Engineering Standards.
* Installation of Power Transformers, Switchgears, Motor Control Centers, Switch racks, Disconnect switches, Circuit breakers, Emergency Diesel Generators, Direct Current system, Relay panels, Marshaling Racks, Remote terminal units, Well Shutdown Hydraulic panels, Instrument junction boxes, Battery chargers, Cathodic Protection Rectifiers, Photo vatic systems, Instruments.
* Installation of under ground and above ground Conduits, Cable trays, Duct banks, Power, Control and Instrument cables.
* Erection assembling and Pre commissioning of 69kv and 13.8kv Overhead Power Transmission lines.
* Construction of Electrical Substation Building, Central Control room, Marshalling rack room, Battery room, and Operation Support Building.
* Calibration of Instruments such as Pressure transmitters, Flow transmitters, Level transmitters, Temperature transmitters, Pressure switches, Temperature switches, Pressure indicators, Temperature indicators, Pressure relief valves and Temperature recorders.
* Installation and Testing of Ground Grids for Sub-stations, Well head facilities and Manifolds.
* Pre-commissioning and Testing of Switch rack Breakers, Transformers and Motor control centers and Hi-Pot Testing of power cables.
* Installation of Cathodic Protection system for Well heads, Transmission pipelines, Flow lines and Trunk lines, such as Deep anode bed, Distribution anode bed, Horizontal anode bed, & Temporary C P systems.
* Material Inspection and identification as per Project specification.
* Implementing Quality Control requirements on construction sites mainly in the installation of Electrical, Instrumentation and Cathodic Protection systems, Preparation of Quality Control Procedures and Inspection Test Plan in accordance with Saudi Aramco and applicable International standards.
* Prepare and Submit Electrical Test packages and Instruments Loop packages for clients approval and records, Maintain documents in respect of Quality requirement and Quality control check list, inspection test plans and Reports incorporate latest applicable industrial codes and Saudi Aramco engineering standards,
Experience: February 2003 to date. SUEDROHRBAU Saudi Arabia Limited
(a member of KOOP group Netherlands)
Kingdom of Saudi Arabia.
Certified Electrical & Instrumentation QA/QC Supervisor.

Here I worked More than 4 Years as a Certified Electrical & Instrumentation QA/QC Supervisor at Following Saudi Aramco Projects.

* Aramco Contract # 16122: Khurais Seawater Injection and Distribution Headers, Khurais.

* JCP Contract # 0074: Jubail Chevron Phillips (JCP) and Juaymah Gas Plant, Sales Gas, Propane, Supply from Juaymah Gas plant to Jubail Chevron Philips Plant, Jubail.

* Aramco Contract # 14789: HNRP NGL Plant, Hawiyah NGL Recovery Plant Upstream & Downstream Gas Pipelines, Project, (Hawiyah NGL to Hawiyah Gas Plant) Hawiyah.

* Aramco Contract # 14521: Shedgum Gas Plant, SHY-1 Expansion Phase 1 Pipeline Capacity Increase, Shedgum to Yanbu. (2 Grade Gasoline and Additional Capacity Projects) Shedgum.

* Aramco Contract # 14408: Onshore Maintain Potential Construction, Shedgum. (Trunk lines and Oil Well's)

* Aramco Contract # 13508: North T/L # 1, 2&3 and Associated wells to Haradh Increment III, Haradh.( T/L, F/L and Oil well's)

* Aramco Contract # 12727: Haradh Khuff Gas Project, Haradh.( Khuff & Jauff Gas Wells)

* Aramco Contract # 10935: Haradh Gosp-3, Haradh Al Crude Increment Phase III Pipeline Project, Haradh.

Duties & Responsibilities:

* Co-ordinate function with client Inspection Department, site Engineer, Sub-Contractors and Project Management, preparing Inspection two weeks look ahead schedule. Checking of site and measurement of completed work. Attending the meeting with client Engineers, unit head and superintendent.
* Responsible for clearing the Technical Query's with consulting service department (CSD), client engineers and design department.
* Responsible for the Supervision, Inspection, Monitoring, Preparation and Implementation of Quality plan in Electrical, Instrumentation, Communication and Cathodic protection activities.
* Coordinate Quality procedures to construction department, Project management and client Inspectors, Coordinate the E-log book Answers and Corrective actions for client inspection comments, attending the weekly QA/QC meeting.
* Drawings review and check field installation in conformance with Saudi Aramco Standards, and International standards.
* Material receiving Inspections for identification and damages, Preparations of non-conformity reports in all deviations and violations of approved standards met during Inspections.
* Prepare request for inspection to client for inspections and acceptance of installations and Testing.
* Supervision of clearance of exception items lists, Prepare documentation & filing system of all Quality plan to delivery to client.
* Ensure all works done as per client drawing & other applicable industrial standards.

December 1997 to February 2003.
SUEDROHRBAU Saudi Arabia Limited.
(a member of KOOP group Holland)
Kingdom of Saudi Arabia.
Certified Electrical & Instrumentation QA/QC Inspector.

5 Years I worked as a Certified Electrical & Instrumentation QA/QC, Inspector, at Following Saudi Aramco Projects.

* Aramco Contract # 44658: Qatif Down Stream Pipeline Project, Qatif. ( Interconnect the pipeline between Qatif Gosp-1 to Berri Gas Plant, Juaymah Tank forms, Rastanura Refinery, Rastanura South Terminal and Qatif Gosp-2)

* Aramco Contract # 44496/01: Haradh Gas Plant Project, Haradh Gas Gathering Manifolds &Transmission Pipelines, Haradh. (Haradh, Waqar and Tinat Gas Gathering Manifolds, 69 kV / 13.8 kV Substation and Power Transmission Lines)

* Aramco Contract # 47206/02: South Haradh Khuff Gas Project, Haradh. (Khuff Gas Wells, Remote Header and Flow lines)

* Aramco Contract # 47206: Khuff Gas Projects, Hawiyah.( Khuff Gas Wells and Flow lines)

* Aramco Contract # 45845: Flow Line Central Arabia, Nuayyim.

* Aramco Contract # 45633: Shaybah Oil Field Development Project, Shaybah

* Aramco Contract # 45052: Flow Line Central Arabia, Hawtah.

* Aramco Contract # 45000: Electrical & Instrumentation, Hawtah.

Duties & Responsibilities:

* Responsible for Inspection and Monitoring of Electrical, Instrumentation, Communication and Cathodic protection activities.
* Inspection of Installation, Termination & Testing of electrical equipments, U/G and A/G conduits, cable trays and tubing for instruments, Photo vatic system for Cathodic protection, Instruments lab calibrations.
* Installation of Cathodic protection systems such as Deep anode bed, Distributed anode bed, Horizontal anode bed, & Temporary C P systems.
* Preparing Electrical & Instrument test packages.
* Installation Inspection of Over head power transmission lines such as pole framing, pole erection, hardware installation, conductor sagging, string, clipping & testing.
* Inspection of all Electrical, Instrumentation and Cathodic protection activities, Ensure all works done as per client drawing & other applicable industrial standards.
* Inspection for testing of Circuit breakers and Transformers.

June 1997 to December 1997.
SUEDROHRBAU Saudi Arabia Limited.
(a member of Suedrohrbau International German)
Kingdom of Saudi Arabia.
Electrical & Instrumentation Foremen.

6 Month I worked as a Electrical & Instrumentation Foremen.

* Aramco Contract # 45000: Electrical & Instrumentation, Hawtah.

Duties & Responsibilities:
Supervision of all Electrical and Instrumentation Works, Installation, Termination & Testing of Electrical equipments, conduits works, tubing, cable trays, Power, Control cables, Perform calibration of instruments, Installation of Photo-vatic systems for Cathodic protection, Assist Client during commissioning

August 1995 to June 1997.
Lewis Electrical and Re-winders, Karnataka, India.
Site Supervisor.

2 Years I worked with Lewis Electrical and Re-winders, Karnataka India, as a site Supervisor for their Sites and shop floor.

Duties & Responsibilities:

Management and supervision of construction and maintenance of Electrical works, such as installation of power panel, installation of lightings, power outlets, installation of the laundry equipment, cable pulling and termination to their respective equipment/devises, installation of motors and wiring systems for Ice plant, Milk Factory and sugar mills, electrical and plumbing installations of Public Housing, High standard Villa, Installation of submersible pumps for watering systems, Maintenance of power generator, water pumps, panel boards, rewinding of motors.

Summary:
I worked on different Gas & Oil field projects with Saudi Aramco as an Electrical and Instrumentation QA/QC Supervisor / Inspector. I worked on different major projects in different plants all over the Saudi Arabia like Berri Gas plant Jubail, Juaymah Gas plant Juaymah, Rastanura refinery Rastanura, Juaymah tank forms Juaymah, Rastanura south terminal Rastanura, Shedgum NGL plant Shedgum, Haradh Gas plant Haradh, Jubail Chevron Philips plant Jubail, Hawiyah NGL Recovery plant (HNRP) Hawiyah, Qatif Gosp-1 and Gosp-2 (Gas and Oil separation plant) Qatif, Haradh Gosp-3 and Gosp-2 Haradh, Hawiyah Water Injection plant (WIP) Hawiyah, and different Gas gathering manifolds and Oil and Gas well sites. And comprehensively familiar with the all the concerning standards, procedures and all safety pre-cautions for a safe construction and testing commissioning work.

Desired Position/ Motto of life:
Any appropriate position according to the above mentioned experience and hidden hardworking which can ends in the thriving achievement of the given goals and challenging targets. And I believe on taking the full responsibility and fulfilling it at my level best.

View contact information...
«« previous resume next resume »»
Search Results (Resumes 5551 to 5600 of 6429)Go to Search Parameters...
Brief Description
I am a Chemical Engineer with Masters in petrochemicals and polymers. Problem analysing and solving capabilities supported by strong technical background and enhanced by effective communication skills are my major competencies.
Project Management, Telecommunication
Diploma in Chemical Engineering and 11 yrs. of experience of refinery and petrochemical plant operation as a field/panel operator.
Skills in various disciplines such as Welding Inspection, Plant Inspection which includes static equipments and piping, Material Testing, Failure Analysis and Lifting Inspection.
Entry Level mechanical engineer
QS/ISO 9000, FMEA/ Control Plan/PPAP
Professional Engineering,construction & Commissioning of electronics and pneumatic Experience types of instruments such as transmitters, pr. switches, control valves, RTD's Leveltroll, I/P converters, mass flow meters,
Planning & Coordination Engineer
I have over 19 years of experience working in the Petroleum Pipeline Industry doing a variety of roles. Until very recently, I have been on a special assignment as a “Lead Project Inspector” on a new Pipeline Delivery Facility, but also have other additional managerial & supervisory responsibilities
Sr. Planner, Scheduler, Risk Management using Monte Carlo Simulation
Design and Construction, Engineering, Calculations, Quality control, Installation and Start Up of new Equipment, Electrical and Electronics Repair and Maintenance
Hands-on skill in Allen Bradley PLC, SLC, Panel Builder 32, RS logix, Frequency Drives,HMI software, SCADA-DCS, Industrial Mechanics and in Broadcast Transmitter.
Bachelor of Engineering (Electronics & Instrumentation) & Master of Technology (Process Control & Instrumentation). Experience in Advanced Process Control & Instrumentation. Total years of experience: 3 Years
Electrical, Instrumentation, SCADA
7-years High School. Experience covers surface and subsurface production maintenance operations, onshore and offshore facilities’ maintenance, engineering projects execution, drilling equipment maintenance, planning and training aspects in various supervisory and management roles.
Gas turbine controls mark
2 years experience in power plant chemist, 3 years experience in industrial water treatment, well known water chemistry and corrosion chemistry, process and troubleshooting
Health safety and environment officer
Mechanical Engineer with 16 years experience in Saudi Arabia, Abu Dhabi, Malaysia, and India. Working in Oil and Gas Industry and Power Plant Construction / Commissioning and Maintenance.
Quick learning capabiliy of any hard assignment. Objective: To work hard for a long-term position in a reputed organization that provides healthy and challenging environment, where I can utilize my skills, professional experience and educational backgrounds to benefit mutual growth and success.
Service Support/ Product Support Heavy Equipment Maintenance Manager
Long experience, professional skills, mastered business sectors: Oil - Petrochemical plants, Banks, Government organizations, Multinational organizations, Hotels & Commercial companies all with its different type of applications, working environments and unique needs.
CAD Designer (electrical/instrument) Extensive years of experience in AutoCAD (Rel. 2004)
I am a recent graduate mining engineer that possesses the following skills: analyzing complex numerical information, working enthusiastically and productively under pressure, dealing professionally with teammates, and working efficiently in a variety of teams and on my own initiative.
Civil-water resources-water distributtion- pipe - sewer design-hdrology-awards-high computer skills
Chemical Engineering 5 years degree with Production Management specialization
Chemical engineer with more that 6 yrs of experience in the field of process and projects
Site Manager, Supervisor, Commissioning, Start up, Troubleshoot,
Industrial Marketing & Sales; Mining; Explosives; Business Strategy; CRM; BPR
12 Years of Experience in the field of QA/QC Supervision Inspection of Electrical,Instrumentation and CathodicProtection Systems for Oil & Gas Producing Utilities, Remote & Relief Manifolds, Wellheads (Oil, Gas and Water Injection) Cross-Country Transmission Pipelines, Trunk lines, Flow lines, etc
QA Manager,Quality Engineer, QA/QC Supervisor, Auditor, Instructor,Multi-Discipline Field Inspector
Key skill: Design and Implementation of quality management system Education: Degree in Mechanical Engineering (A.M.I.E) from “The Institution of Engineers”-India Certifications: ISO 9000:2000 Series QMS Lead Auditor - course conducted by B.V.Q.I.
I have extensive experience in a wide range of Instrumentation and control systems; covering a range of job functions in various industries i.e. process, chemical and petro-chemical, on-shore oil & gas, pharmaceutical. Involvement in all areas of instrumentation engineering: electrical interfaces an
QHSE Assistant with 4 years experience, 8 years in the Oil & Gas Sector, advanced PC Skills and Statistical Techniques.
Consultant in the following areas: Crude/ lpg Transportation-Storage-Shipping, Loss Control Surveyor, Petroleum Inspection: Crude Oil Loading / Discharging at Terminals, Refineries, Shore and Ship Tanks Sampling, Measurements & Lab. Analyses, Contracts Analyses and Advice, Shortage Investigation
Wealth of experience gained within an International Company in all aspects of Wireline, LWD, well placement and ‘geosteering’ in both onshore and offshore projects. To secure employment within a challenging exploration or developmental role to fully utilise six years of field experience.
Chemical Engineer from Indian Institute of Technology(IIT)-Delhi
Electrical and Instrument system design and commissioning, Project Engineering, Control and Automation Engineering. I am degree qualified in Electrical and Instruments
HSE advisor to the upstream oil & gas industry with 13 years experience in Australia, Russia, Nigeria and the Middle East.
Chemical Engineer with Environmental Engineering experience
Results Driven Project Manager w/16yrs Industry Experience. Master of Civil Engineering/BSc Petroleum Engineering/Certified PMP/EPC Management/AFE Management/Contracts Review/Risk Analysis/Global Client Experience/Global Team Development: Lead by insistence on personal accountability and growth.
Well experienced as an Electrical Field Maintenance and Construction QA/QC & Foreman in Oil and Gas Facilities, Refineries, Airport and Mining Industries with a demonstrated ability to lead Maintenance and Construction Projects.
Service / Maintenance Engineer, Electro-Mechanical, Mechanically biased
Senior Mechanical Engineer, Bachelor Of Engineering
I write to you seeking QA/QC Engineer’s position ( NACE Level II Sr. Coating Inspector & NACE Corrosion Technician ), which can utilise my experience in Quality Assurance, Quality Control and Operations field in coating Industry. In this context, I enclose my resume for your consideration.
Maintenance Planning scheduling, Maximo, Ms Office- Word, Excel, Power Point etc. Excellant English communications, Dedicated, organized, time management, result oriented, punctual and hard working
Experienced heavy duty mechanic. Worked in workshop and field service. Managed workshop and fleet of field service vehicles. Engineering experience include testing and reporting on ADT’s. Currently employed by Bell Equipment Co. (Hitachi AH500 – AH300). Got experience on lots of different machines
I have spent about 8 years, applying innovative approaches to spatial data development, Integration and Management practices in my various capacities.
Cwi/QA/QC Manager
Operations Manager or Shift Supervisor in a Power Plant
First   Prev   101   102   103   104   105   106   107   108   109   110   111   [ 112 ]   113   114   115   116   117   118   119   120   121   122   123   124   125   126   127   128   129   Last
Seach Parameters

Change search parameters...
CATEGORIES: Engineering/Technicians;
INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)Find results with:
Save this search parameters...
Post job with this search parameters...
Frequently Asked Questions
What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...
Employer's Center


» Employers Home
» Feedback
» Help

» Post Jobs
» Edit/Delete Jobs
» Search Resumes
» Resumes By Email

» My Account
» Log In

» Log Out
 
©1999-2008 Misco Jobs. All rights reserved.  Contact: support@miscojobs.com