Resume - Over 18 years experience in construction, installation and mechanical assemblies...

Misco Jobs

Resume #37744

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
Technical
- mechanical assemblies and fitting on rotating equipment(levelling,alignments, start up)
- programming on NC (3 and 5 axis)
- participation of leak test and hydro testing on pipes
- propulsion and auxiliaries

Management
- follow up and reporting of orders
- machining progress and reporting
- application of all quality standards and safety procedures
- supervising all mechanical vendor's activities
- reporting and progress on a data base
- follow up and clearance of punch list items

OBJECTIVE:
I simply expect a job where I can apply all my experience and learn more

WORK EXPERIENCE:
10/04 to date: TOTAL EXP ANGOLA
JV Technip/Saipem/Stoltoffshore (TSS) In Consortium With Samsung/Daewoo Shipyards
Dalia South Korea Samsung/Daewoo Shipyard - FPSO
Position: Commissioning Mechanical Engineer/supervisor

- Hull commissioning:
sea water system, fresh/potable water system (cooling system and accommodation supply), reverse osmosis plant, sewage unit, air service/instrument, cargo/ballast pumps with HPU unit (FRAMO system), diesel generators (WARTSILA) and machinery space, diesel supply and treatment, fire water pump, tandem methanol/crude oil off loading (quick coupling decoupling system), all tanks inspection including cargo tank, ballast tank, diesel storage, fresh water storage, OTP's review on all hull systems

- Topsides pre-commissioning and commissioning on all mechanical/rotating equipments on water treatment unit.
Sea water injection pumps(SOLAR turbines, SULZER pumps), water lift pumps(FRAMO) chemical water treatment, cooling & heating medium, air compressors(INGERSOL RAND)

- Permit to work, TOTAL safety procedures and OPERCOM system

04/04 to 09/04: ENTREPOSE CONTRACTING/BURLINGTON
MLN 405 Algeria - Oil and Gas
Position: Commissioning Mechanical Engineer/supervisor

- Disassembly and reinstallation all the YORK propane refrigeration unit with the vendor's representative.
- Dismantling screw compressor
- Dismantling, cleaning, drying and flushing all the pipe unit and condenser
- Line up motor and compressor
- Pre commissioning and commissioning activities

04/04 to 05/04: ENTREPOSE CONTRACTING/SONATRACH
MESDAR Algeria - Oil and Gas
Position: Commissioning Mechanical Engineer

- Pre-commissioning and commissioning mechanical engineer on MESDAR site in
Algeria for crude extraction, export and compression/gas injection.
- Pre-commissioning, Commissioning and start up on two 200m³/h vertical crude export pump in liaise with GUINARD PUMP vendor's rep.

11/02 to 03/04: ENTREPOSE CONTRACTING/BURLINGTON
MLN 405 Algeria - Oil and Gas
Position: Commissioning Mechanical Engineer

- Pre-commissioning and Commissioning mechanical engineer on MLN Site in
Algeria for crude extraction, export and compression/gas injection.
- Reports and assists to the Commissioning Manager, identifications of basics function per system.
- Liaise with client, subcontractors and vendors, participation in FAT activities, supervising of assembly for pre-commissioning and commissioning dossiers.
- On site, supervising for activities of commissioning discipline to ensure quality standard and safety Procedures are being followed including adherence to permit to work.
- Punch lists arrangement, recorded in appropriate documentation and punch list items are cleared.
- Training on permit to work by Burlington
- Leak tests with air on instrument air / nitrogen line / plant air line and inerting tanks / vessels with nitrogen unit to prepare first oil on plant.
- Supervising all pre-installation, installation (levelling, pre line up and line up) on centrifugal pumps (FLOWSERVE), re-injection pumps (PERONI), reciprocating compressors (NUOVO PIGNONE), centrifugal compressors (THERMODYN, NUOVO PIGNONE), condensers (GEABTT).
- Start up rotating machines with vendor's representative.

05/88 to 08/02: DCN CHERBOURG
SNLE-NG French Nuclear Submarine/Scorpene Pakistan And Chilean Classic Powered Submarine
Position: production engineer

- Shipbuilding, French nuclear submarines, Pakistan and Chilean classic powered submarines, heavy steelwork fabrications, computer assisted mechanical fabrication.
- Supervising mechanical assemblies and fitting on rotating equipment, work preparation and follow up, scheduling and computerised assisted production in mechanical engineering.
- Assistance and reports to the mechanical Manager for work progress, follow-up of orders.
- Programming on NC (3 and 5 axis), machining progress measurement and reporting to the mechanical engineer.
- In charge of feasibility studies and conception design (2D & 3D) for mechanical tools, order materials and organise, supervising the construction of them.
- Procurement and expediting materials relating to the NC machines for management and maintenance.

12/84 to 04/88: DCN CHERBOURG
SNLE and AGOSTA French Nuclear Submarines
Position: fitter mechanical technician

- Mechanical technician jointed to a dedicated team for assemblies checks and start-up of mechanicals assemblies.
- Heavy steel Structures/mechanical/hydraulic blocks assembly.
- Mechanical fittings on propellers, scratching on cone-shaped.
- Assembly and fitting of mechanicals assemblies / structures and alignments.
motors / pumps Coupling and alignments and start-up rotating machines with vendor's representative

EDUCATION & CERTIFICATION:
04/02 to 06/02 Intensive courses of technical English in FIM in Cherbourg (6 weeks)
Good understanding and speaking English

05/99(1 week) Course Certificate on warming-up in DCN Cherbourg

04/98(8 weeks) Courses certificates on NC programming and Language 3 and 5 axis (last version) in
Cisigraph/Matra Datavision/ NUM in Paris

05/97(1 week) Course Certificate of WBS in DCN Cherbourg

09/87 to 06/88 Certificate of technician in work preparation and methods in the Cherbourg
French navy school

09/83 to 12/83 Training in steam machine

09/81 to 06/83 Graduated Technician in mechanical engineer in the Cherbourg French Navy school in Cherbourg

2 days each year HSE courses

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1901 to 1950 of 7051)

Go to Search Parameters...

Brief Description

On line analyzer & Field Instruments Installation & commissioning Experience, DCS & PLC maintenance level experience

B.Tech from IITK, 6 yr exp. in piping stress on CAESAR II, Triflex. Review of lines on PDMS & Smart review. worked with bechtel, chemtex, Citec(Finland)

A Logging Analyst in the Syrian Petroleum Company. A Petrophysicist in Al Furat Petroleum Company, responsible for many fields for all petrophysical operations and formation evaluations. Petrophysics section head, Wireline logging, perforation and core analysis contract holder.

Extensive Wonderware software experience including Industrial Application Server and System Platform products. Expert industrial PC skills. Extensive experience with Microsoft Virtual Server and Terminal Server products.

I have involved in petrochemical, oil/gas, and heavy industrial projects. I have strong academic achievements, excellent interpersonal skills, and positive attitude, Commitment and desire to perform engineering design. I am also exceptionally well organized and highly motivated and able to pull toge

To obtain a challenging position in your organization where my technical and management skills can be effectively honed and utilized and to gain practical experience in the realm of Civil/Structural Engineering.

Over Eight years of multidisciplinary Civil Engineering experience

Instrumentation & Maintenance industrial Engineer

Substation primary design engineer for high voltage substation

DEEE with 4 years Triconex Knowledge

I had passed bachelors degree in safety and fire engineering.Passed NEBOSH international certificate in occupational Safety and health.

I have 13 years in piping design and drafting field for Oil and gas industry

I possess hands on experience in developing EMS (ISO 14001) and OHSMS (OHSAS 18001) procedures in line with International best practices, performing HSE audits, leading EIA and Risk Assessment study teams, assisting in development of emergency response / contingency plans e.t.c,

Vast experience of planning, Management reporting, Refinery Economics,Vast experience in Petroleum Refining. Confident and result-oriented, Able to analyze and apply problem solving and decision-making techniques to achieve desired objectives within target deadlines.

16+ years experience HVAC Engineer with intension to work in Oil and Gas field

Sr. Projejct Document Controller-Exp of 12 years in Oil & Gas/Power Project Industry

Thirteen (13) years of extensive and diversified experience in managing and leading variety of upstream Oil & Gas handling, Chemical & Petrochemical Projects.

About 16 yrs of experience in the field of Civil Engineering Design, Construction & Inspection and Document Control for turn over (Piping Test Packages, Punch list & etc) & dbase management using MS Access program.

Electrical Intrument & Control System

Lead Mechanical Engineer, 17 years of experience in preparation of Specification/ Material Requisition/ Proposal/ Scope of Work; Design Basis and calculations, Technical & Cost Evaluation; Vendor Drawing Review, Static, Rotating and Material Handling Equipment and Mechanical Packages

Senior Piping Designer with 20+ years experience. AutoCAD, AutoPlant, Excel, Access, Word, Outlook.

Wireline supervisor or wireline consultant

Geoscientist with experience of working in a multidisciplinary team in a major E and P company. Experienced in Seismic modelling and Interpretation, and reservoir modelling. Holds an M.Sc in Petroleum Geoscience.

Process Engineer with over 11 years oil and gas engineering background. Design experience of Liquefied Natural Gas import terminals and process simulation experience of base load liquefaction trains.

Structural engineer with over 14 years experience in EPC projects (grass root and revamp) in refineries, petrochemical plants, spinning mill, cement plant & other industrial units.

OBJECTIVE: To utilize my experience in manufacturing and construction. Using various software programs, and engineering disciplines, (24,000hrs) Of AUTOCAD experience.

More than 14 years process & project engineer experience in Oil & Gas and Oil Refinery.

CAREER OBJECTIVE A suitable, challenging, and rewarding position in Petroleum Engineering.

Working Experiences as Senior Process Engineer from 1992 - 2003 in LNG/ LPG Plant of PT. Badak NGL in Bontang East Kalimantan Indonesia. I have been working for PT. Badak NGL over 20 years. Previous Job experienced in PT. Badak as Senior Production Planning Engineer from 1983 - 1991.

ERP Consultant (functional and technical) : MFG-PRO and Progress, Axapta, Movex, SAP Software Development Project Manager : Visual Basic, Oracle, Access, SQL-Server

I have multilingual skills and am fluent at Russian, Turkish and good atdrilling

Proactive and skilled professional with a solid supervisory background and experience developed on projects in Venezuela

Good Capability and ability to get goal the project with safety, quality, planning and costing

Using FEM packages (COSMOS, ALGOR) to analyze structures and components (Stress, Stiffness, Fatigue, etc). Document drafting and review (Calculations, P&IDs, MITPs, etc.).

More than 23 years experience as Sr. rotating techn/foreman in the refinery, responsible for the repair, troubleshooting, modification, preventive and predictive maint. of all rotating equipt.; ensure safety, planning, scheduling of personnels, preparations of tools and spare parts.

Stress Analysis of critical lines connected to static as well as rotating equipments like exchangers, columns, reactors, pumps, compressors. Super high pressure steam lines, lines connected to ‘cold box’ (Cryogenic lines), and expansion loop sizing for rack lines, analysis of pressure safety valves

A highly experienced MBA professional with exceptional interpersonal and communication skills and an external extensive background in the following broad-based competencies: Procurement/Supply Chain Management Strategic Planning; Contract Negotiation; Business Development

Wire line logging: done a special six months course on wire line loggingIn which I Have studied all the logs their specifications, uses, tools, interpretation etc, like gamma ray, sp log sonic log, neutron porosity logResistivity & conductivity log, density &photo electric factor log etc.

Crude oil storage tank construction experience as per API 650/653

i am looking for dimensional survey engineer job. i have complite Diploma in Marine & Offshore Technology.i have been work for Keppel fels Shipyard 3yers. Dyna-Mac shipyard 1.5years. now working for Norce offshore in Indonesia for DLB Projct.

I Mr. Noel C. Atienza 12 almost 12 years experience in oil and gas as a senior mechanical technician, including as a machinery supervisor. I'm permanent residence in singapore

a great job seeker of electrical field

Pipeline Integrity Engineer / Project Engineer / Design Engineer

Technical Assistant to Reservoir/Production/Petroleum Engineering.

BSc Chemical Engineer Having Six Year experience in Petrochemical Industry

Currently working in SNC LAVALIN ENGG INDIA LTD. Mumbai and deputed to SNC LAVALIN EUROPE B.V. BRANCH to Shaybah, saudi arabia as a PDS ADMINISTRATOR. My job profile is related to Piping Engineering and PDS(PLANT DESIGN SOFTWARE),RIS (Relational Interface

Controls and Instrumentation Engineer / ESD-Triconex & DeltaV SIS/ 6+year Exp

Provide structural engineering, construction management, real estate due diligence and expert witness services.

Innovative Professional with 26 years of progressive experience in engineering design, maintenance planning and management, including 16 years in the Oil/Gas industry.

Over 18 years experience in construction, installation and mechanical assemblies, heavy

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 [ 39 ] 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out