Resume - 13 years post qualification experience in FEED, detailed Engineering and Enginee...

Misco Jobs

Resume #38375

CONTACT INFORMATION:
View contact information...

EDUCATIONAL QUALIFICATIONS:
Master Degree(M.Tech) in Thermal Engineering/ Propulsion Engineering with First Class from College of Engineering –Trivandrum, India in 1991.

Bachelor's Degree(B.Tech) in Mechanical Engineering with First Class from College of Engineering –Trivandrum, India in 1988.

CAREER SUMMARY
13 years post qualification experience in FEED, detailed Engineering and Engineering Management for Chemicals/ Fertilizer, Petrochemicals(Ethylene, Poly Ethylene,Poly Propylene,etc), Refinery, Oil and Gas industry(Onshore & Offshore, Upstream & Downstream) and detailed engineering in Pressure vessels, Heat Exchangers, Columns Filters Separator, Skid mounted Equipment, Double pipe Heat Exchanger, Silos, Reactor, etc. I am well conversant with design software such a PV elite, Code calc, B-Jac etc. Extensive communication with client and vendor/ Engineering subcontractor at all project stages for their queries, approval of project documents and resolution of Vendor's / Subcontractor's deviation and concession request.

In addition, I have experience of engineering contract administration and supervision of teams of draftsmen and design Engineers. Conversant with ASME Sec.VIII Div.1 & Div2, ASME Sec.I TEMA, API & PD5500 code requirements. I am also conversant with the project specification requirements of various oil companies such as Saudi Aramco, Shell, Gasco, Zadco, Adnoc, QGPC, ADCO, KNPC, Adgas, QAPCO, Sumitomo, etc.

Conversant with preparation of design calculations, User design specification(Div.2), Manufacturer's design Report(Div.2), Manufacturer's data report(Div.1), R form for repair job and material ordering specification based on code & client requirement.

Carrying out Preparation / Review / Approval of Complete detailed mechanical design of pressure vessels and Heat Exchanger using design software and preparation / checking / approval of equipment datasheet or drawings. Preparation / Review / Approval of project specifications and issue of material requisitions, bid evaluation, estimation and selection of suppliers

Familiar with various international material codes like ASME,ASTM, API, BS, DIN etc. Involved in preparation and implementation of ASME quality system and procedure of "U", "U2", "S", "PP" and NBBI'S R stamp requirement and ISO 9001 requirement.

SUMMARY OF EXPERIENCE
October 2005 to Till date Sumitomo Chemical Engineering Co. Ltd. Japan
One of the EPC in the field of Petrochemical
Position: Specialist Engineer (Static Equipment)
November 2004 to May 2005 CTCI Corporation Taipei, Taiwan. Leading EPC contractor in Taiwan(Agency Hire, short term contract) Position: Sr. Mechanical Engineer (Static Equipment)

March 2001 to June 2004 Gulf Specialized Mechanical & Engineering Services Co. LLc (Formerly Deutsche Babcock Services), Epc Contractor Abu Dhabi, UAE.
Position: Head of Engineering

June 1999 to March 2001: Adyard Abu Dhabi LLc, Epc Contractor Abu Dhabi, UAE.
Position: Design Engineer

Jan 1998 to Feb 1999: RE Engineering, Fabrication Company, Bahrain.
Position: Design Engineer

From May 1995 To May 1997 Gulf Engineering Company For Heat Exchanger
Limited, Fabrication Company, Saudi Arabia
Position: Design and Estimation Engineer.

January 1994 To April 1995 Cad Design System, Engineering Consultancy
Trivandrum, India
Position: Design Engineer(Static Equipment)

July 1991 To January 1994 Soft Code, Engineering Consultancy,Trivandrum
Position: Design Engineer

June 1989 To January 1990 Travancore Titanium Products Limited,
Titanium Di-Oxide production Unit, Trivandrum
(Government under taking company)
Position: Mechanical Engineer

JOB HISTORY: (For details of technical work exprience refer to Appendix)

A) M/s Sumitomo Chemical Engineering Co. Ltd. Tokyo, Japan.

Working as a Specialist Engineer (Static Equipment) for the Rabigh Refinery / Petrochemical Project(for Poly propylene and Polyethylene plant), Rabigh, Saudi Arabia.
Client- Joint Venture of Saudi Aramco & Sumitomo Chemical company
Project Management Consultant- Foster Wheeler Energy Ltd. UK
EPC- Sumitomo Chemical Engineering Co. Ltd. Chiba, Japan

B) M/s CTCI Corporation, Ctci Tower,77, Sec.2, Tun Hwa South Road, Taiwan.

Worked as Sr. Mechanical Engineer (Static Equipment) in Qatar Qapco EP-2 project
Client: Qapco, Qatar
Project Licencer: Stone & Webster
EPC contractor: JGC Japan & CTCI corporation Taiwan

C) M/s Gulf Specialized Mechanical & Engineering Services Co. LLc (Formerly Deutsche Babcock Services), Po Box 8865, Mussafah, Abu Dhabi, UAE

Worked as Head of Engineering for the following project.

Project: Qatar General Petroleum Corporation, Dukhan Field Expansion project, Qatar.
EPC: Siirtec NIGI S.P.A, Itali
Detail Engineering and manufacturing of Pressure Vessels and Column as per BS5500 Code and ASME SecVIII DIV-1

Project: Fujairah Water And Power Projects, Fujairah, U.A.E
Contractor: Technip Germany Gmbh
Detail engineering and manufacturing of Pressure Vessels & Column as per PD5500 -2000 Code

Project: EPS FPSO Atlantic (Turret) Project
Client: Single Buoy Moorings Inc (Sbm), Switzerland
Detail Engineering and Manufacturing of Pig Launcher / Receiver as per Sec VIII Div2

Project: DEWA-Evaporator Project
Client: DEWA, Dubai
Contractor: GSME, AbuDhabi
Detail Engineering and manufacturing of Evaporator.

D) M/s Adyard Abu Dhabi LLc, Po Box 7604, Mussafah, Abu Dhabi, UAE.
Worked as Design Engineer for the following project

Project: Adoc-Japan Expansion Project, Abudhabi
Client –AbuDhabi oil Company
EPC- Adyard AbuDhabi LLc
Detail Engineering and manufacturing for Expansion Project.

Project: MAFP Project, KNPC, Kuwait
Client: Mitsui Engineering & Shipbuilding Co.Ltd.,Tokyo, Japan
Detail Engineering and manufacturing of whole package.

Project: Cawthorne Channel Gas Ag Gathering Project, Nigeria
Client: Kcc Process Equipment, UK
Detail Engineering of Pressure Vessels (Sec VIII Div2) and Heat Exchanger as per
ASME Code

Client: Petrokemya, Al-Jubail, KSA
Contractor: Mitsuibishi Heavy Industries Ltd. Nagasaki, Japan.
Detail Engineering of U-Stamp Pressure Vessels and Heat Exchanger.

E) M/s RE Engineering, Po Box 29256, East Riffa, Bahrain.

Worked as Design Engineer for the following project
Design of U-Stamp Pressure Vessel & ISO Drawing Preparation For QGPC, Dukan, Qatar

Project: 1851, Bulk Plant Expasmeon, Jizan, K.S.A.
Client: Technipetrol Italia
Design and fabrication of static Equipments

Project: Debottle Necking Project
Client: Aramco Plant No. 429, Abqaiq, K.S.A.
Contrator: Technip, France.

Client: Saudi Arabian Oil Company, Riyadh, K.S.A.
EPC: Daewoo Arabia Ltd.
Api Tank For Saudi Arabian Oil Company, Plant No. Z51/Z81, K.S.A

F) M/s Gulf Engineering Company For Heat Exchanger Limited, Po Box 342, Al-Jubail 31951, KSA

Worked as Design & Estimation Engineer for the following project
Project: NHT/CCR Platformer Plant, Rastanura Refinery Project,
Client: Saudi Aramco,K.S.A.
EPC: JGC Corporation Yokohma, Japan
Design and detail Engineering of Equipment

Project: NAMA Project, Al-Jubail, K.S.A.
Client: PetroKemya KSA
EPC: Mitsui Engineering & Shipbuilding Co.Ltd.Tokyo, Japan
Design and detail Engineering of Pressure vessel, Heat Exchanger and API Tank

Client: Saudi Arabian Oil Company, Riyadh Refinery,Saudi Arabia
Fabrication of U-Stamp Pressure Vessel and Heat exchanger.

Client: United Arab Can Manufacturing Company, Can/End Plant, Dammam, K.S.A.
Contractor: Saudi Arabian Bechtel Company, Dhahran, K.S.A.
Fabrication packaged units

Project: Expansion Project For VCM Units Petrokemya, K.S.A
Client: PetroKemya KSA
EPC: John Brown, Houston, Texas
Fabrication of Static Equipment Packages.

For details of technical work exprience refer to Appendix

APPENDICES

WORK EXPERIENCE DETAILS
Sumitomo Chemical engineering Co. Ltd (EPC Division of Sumitomo Chemical company) Chiba, Japan

Responsibility:
* Preparation of Technical bid evaluation and selection of suppliers.
* Preparation of MR, Equipment data sheets & Project Specification
* Review and approval of Static Equipment Design Calculations and Drawings according to codes and purchaser standards.
* Co-ordination with Projects department and Planning department
* Attend technical meeting with purchaser and Vendors..
* Review of material specification & Vendors NDE procedure
* Shop visit and monitor the project progress.
* Checking of Skeleton Drawing, fabrication drawing & P&ID

CTCI Corporation, Ctci Tower,77, Taipei106, Taiwan, R.O.C
Position: Sr. Mechanical Engineer(Static Equipment)

* Technical bid evaluation & selection of Suppliers.
* Review and approval of Vendor Heat exchanger and Pressure Vessel Design Calculations and Drawings according to Codes and Purchaser Standards.
* Co-ordination with Projects department and Planning department
* Preparation of Equipment data sheets, project specification and MR
* Checking P&ID, Skeleton Drawings and fabrication drawings
* Attend technical meeting with purchaser and Vendors.
* Review of material specification & Vendors NDE procedure
* Shop visit and monitor the project progress.

Gulf Specialized Mechanical & Engineering Services Co. Llc (Formerly Deutsche Babcock Services), Abu Dhabi, UAE.
Position: Head of Engineering

* Review of Mechanical Design Calculations, Material Specification and Drawings according to codes and standards.
* Liaise with client, Third party inspector and Authorized inspectors for engineering related issues.
* Preparation User design specification (Div.2), Manufacturer's design Report(Div.2), Manufacturer's data report(Div.1), and R form for repair job.
* Review and approval of subcontracted Design and fabrication drawings
* Co-ordination with Projects dept, Planning dept, Fabrication shops and procurement dept.
* Preparation of Equipment data sheets & project specification
* Attend technical meeting with client and subcontractor.
* Work allocation and coordination with a group of design engineer and draftsmen.
* Monitor / control the engineering dept activities.
* Conducting internal quality Audit of other department.
* Review of material procurement sketch
* Development of design package for ASME "U", "S" & "U2" stamp accreditation approval.
* ISO 9001 procedure implementation.

Adyard Abu Dhabi Llc, Epc Contractor Po Box 7604, Abu Dhabi, UAE.
Position: Design Engineer

* Preparing Mechanical Design Calculations, Material Specification and Drawings review according to codes and standards.
* Liaise with client, Third party inspector and Authorised inspectors for engineering related issues.
* Preparation User design specification(Div.2), Manufacturer's design Report(Div.2), Manufacturer's data report(Div.1), and R form for repair job.
* Review of subcontracted Design and fabrication drawings.
* Preparation of fabrication schedule using Primavera Project Planner(P3) and MS project.
* Co-ordination with Projects dept, Planning dept, Fabrication shops and procurement dept.
* Attend technical meeting with client and subcontractor.
* Work allocation and coordination with Design Engineer and Draftsman.
* Conducting internal quality Audit and ISO procedure implementation.
* Preparation of data sheets procurement sketch and GA drawings in AutoCAD
* Development of design package for ASME "U" &"U2" stamp accreditation approval.

RE Engineering, Po Box 29256, East Riffa, Bahrain.
Position: Design Engineer
* Preparing Mechanical Design Calculations, Material Specification and Drawings review according to codes and standards.
* Liaise with client, Third party inspector and Authorized inspectors for engineering related issues.
* Manufacturer's data report(Div.1), and R form for repair job.
* Review of subcontracted Design and fabrication drawings
* Co-ordination with Projects dept, Planning dept, Fabrication shops and procurement dept.
* Preparation of fabrication schedule using Primavera Project Planner (P3) and MS project
* Attend technical meeting with client and Conducting internal quality Audit
* Work allocation and coordination with Design Engineer and Draftsman.
* Technical Data Sheets preparation.
* Preparation of data sheets procurement sketch and GA drawings in Acad
* Development of design package for ASME "U" stamp accreditation approval. ISO procedure implementation.

Gulf Engineering Company For Heat Exchanger Limited, Al-Jubail, KSA Position: Design and Estimation Engineer.

* Preparing Mechanical Design Calculations, Material Specification and Drawings review according to codes and standards.
* Liaise with client, Third party inspector and Authorized inspectors for engineering related issues.
* Manufacturer's data report(Div.1), and R form for repair job.
* Review of subcontracted Design and fabrication drawings
* Co-ordination with Projects dept, Planning dept, Fabrication shops and procurement dept.
* Attend technical meeting with client. Conducting internal quality Audit
* Work allocation and coordination with Engineer & Draftsman.
* Technical Data Sheets preparation.
* Preparation of data sheets, procurement sketch and GA drawings in Acad
* Development of design package for ASME "U" stamp accreditation approval. ISO procedure implementation
* Estimation of pressure vessel and Heat exchanger.
* Tender document preparation.

DESIGN SOFTWARE USED
* CODE CALC VER 6.1 - For The Design Of Pressure Vessel And Heat Exchanger Components.
* PV Elite VER 2004 - For The Design Of Pressure Vessel And Its Components, Wind And Earthquake Load Calculation.
* BJAC - Teams - For Mechanical Design Of Heat Exchanger And Pressure Vessels.
* STAAD Pro –Structural Design Package.

Well conversant with different computer packages can able to work independently with different software.
* AutoCAD 2004
Can Able To Generate Drawings Using Autocad A Computer Aided Drafting Package, Also Write Program To Generate Drawing Using Auto Lisp.

Conversant With The Following Software
* Microsoft Project, MS office, Microsoft Access, Word Perfect,
* Auto Desk 3d Studio
* Oracle With Developer 2000
* Visual Basic 6.0 With Ms Access & C++
* Primavera Project Planner(P3) Ver. 2
* Web Design
HTML, Frontpage, Adope Photo Shop And Flash

SPECIAL TRAINING COURSES ATTENDED
* Iso 9000 Awareness Training Conducted By National Inspection And Technical Testing Co. (Tuv/Fahss), K.S.A. With The Co-Operation Of IQM Middle East.
* Iso Internal Quality Auditors Conducted By National Inspection And Technical Testing Co. (Tuv/Fahss), K.S.A. With The Co-Operation Of IQM Middle East.
* Design, Inspection & Repair Of Pressure Vessels As Per Asme Sec.Viii Div.1, 4 Days Seminar Conducted By Harvard Technology Middle East, Abu Dhabi, UAE.
* 6 month project (Thermal analysis in Cryogenic Tank for M.Tech thesis ) done at Indian Space Research center in Trivanrum.

MEMBERSHIP
* Member Of Institution Of Engineers (India), Member No. M127324-2
* Life Member Of The Indian Society For Technical Education, Member No. Lm 13987 Since 1993.

REFERENCES:
Available upon request

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1151 to 1200 of 6543)

Go to Search Parameters...

Brief Description

Boat technision, aircraft technision and designer

INSTRUMENT ENGINEER, WORKED ON FIRE & GAS, ESD SYSTEM, STEAM TURBINE, STARTUP BLOWER. GOOD KNOWLEDGE OF PLC, DCS & SCADA.

Highly motivated and experienced MAINTENANCE SUPERVISOR.

ndt, api, aws inspections supervisor 35 years exp. chemical palnt, pipeline and oil field, currently 17 years at chemical plant supervise mech. Intgrity and PSM programs, plant site maintenance supervisor, ground, rr track, ditches, building, etc

As a technological process engineer at The Main Platform I am alternatively dealing with two kinds of jobs: in the field and in the control room.

17 years experience as a Piping/Mechanical Draftsman/Designer in the Oil & Gas industries (Offshore and Onshore facilities). Proficient use of design software include AutoCAD 2008i, PDMS to model and generate 2D drafting and also MDS design software to design and model pipe support.

Senior Mechanical Engr. with a vast amount of process in engineering, operation, optimization of oil and gas production facilities (Well completions, artificial lift and gathering systems) Harnesses best-practice project management methodologies

Lead or Senior Electrical Designer

Maintenance Manager mining and oil&gas

Seeking position as…Welding Engineer/Welding Inspector Leveraging an experienced track record for improving company performance and profitability.

Senior Geologist

DCS, PLC, SCADA and training.

13 years post qualification experience in FEED, detailed Engineering and Engineering Management for Chemicals/ Fertilizer, Petrochemicals(Ethylene, Poly Ethylene,Poly Propylene etc), Refinery, Oil and Gas industry (Onshore & Offshore, Upstream & Downstream) and detailed engineering in Pressure vesse

I am a Mechanical Engineer with 16 Years of experience as "Piping Engineer" in engineering of Offshore plants i.e Fixed platforms, FPSO, FPU and Onshore plants ex. Refineries, Petrochemicals, Polyester Plant etc. I am having vast experience of working with Leading International Clients.

Oil gas tankage [farm tank-speherical - double wall] fabrication/construction management. QAQC mangement - construction safety management

Associate myself with an organization, which has potential for both organizational and individual development and scope for learning and to enhance my skills team output and competent professional.

A Marine Maintenance engineer with International exposure and managerial experience. Last post as Technical superintendent at Tokyo, shipping related.

Experience in O&M of gas turbine &steam turbine

15 years experience of planning, design and implementation of Networks, Telecommunications, Systems implementation and integration, with IT teams around world using my expertise and Multi-language skills: English, Russian, Portuguese, Spanish.

Engineering services to the community and the industries and future progression as a chemical engineer in all related fields such as designing oil and gas industries and mining

ESD logic design and analysis, Process Control design, analysis, and tuning, Honeywell system configurations and implementations, Triconex system configurations and implementations , Design Scope Writing, Conducting review meetings, acceptance tests, and commissioning

ME (Structural Engineering) From Regional Engineering College (NIT), Trichy, India,STAAD/Pro, Active member in AISC

Civil/Structure engineer with local/international experience, more than 13 years experience in detail engineering design and supervision of infrastructure projects (bridge, overpass, etc), industrial, residential and commercial projects.

Over twenty years experience spent in the oil and petrochemical industry. Experienced in all aspects of electrical commissioning operations and maintenance. With design reviews and Vendor site visits through to fats. with the ability to liase with other disciplines on gas turbine and diesel generato

MAINTENNACE PLANNING / MAINTENANCE /PROJECT/CONSTRUCTION

Piping Designing / Mechanical Draughtsman including development of Layouts, Details, Isometrics, P&IDs etc. as per piping specifications for Onshore, Offshore, Refineries, Process Industries, Chemical, Power and Desalination Plant.

BE. Professional with 15 + Years of Sound Exposure in Project management, Engineering services, utility Operations, Erection, commissioning & Management

Mechanical and Marine Engineering. - Experience in Diesel Engines, Generators, Gas Turbines and Steam Turbines. - Experiences in Computerised Maintenance Management System (CMMS) and PMS - Electronic Maintenance Management System.

Effective communication, team building, annovative

Mechanical Supervisor(Power Plant). Have work experience in Pakistan Navy also.

Over 11 years Elec & Instrument &Control Engineering and Detail Design in Downstream Oil&Gas,Petrochem, Energy. Field Instrument Specs, Construction Dwgs, Site Supervision, FAT of Control Systems, Supervisory Role.

I am a Senior Structural Engineer with detailed design, field engineering, fabrication supervision and hook-up experience in the offshore oil and gas industry. I have gained a solid technical background and practical outlook by working on site in the oil and gas industry.

Expert in Well Stimulation (Hydraulic Fracturing, Acidizing) and Sand Control and highly experienced in sand face completion, production optimisation and FDP

Laborer

HSE technician, Safety officer, HSE Advisor

Piping Designer PDS administra

I have done 3 years apprenticeship in well-established organisation in Mumbai in naval dockyard

Sixteen years of experience in Design and Analysis of offshore and onshore structures. Varied Experience in design of structures from Fixed offshore platforms, FPSO, Refineries to concrete structures. Working experience in various multinational engineering firms and various working locations.

Chemical Engineer having 15 years of experience in Refinery. Skills possesed include in depth knowledge of process design using simulation software and knowledge of various international codes.

Operations Manager - 18-yrs experience - Russia, China, SE Asia, Europe & US. Background in drilling, production & well servicing. Experienced with G&G & reservoir. Extensive experience in tendering & contract negotiation. Line management responsibility of budgets of >$250M.

Having a Diploma in Mech. Engg. with 18 years of Experience in Designer

Energetic and productive professional with broad-based experience in Maintenance Planning, Shutdown Planning and Project Management in Line with the Computerized Maintenance Management System.

I have total Twenty-one years hand on working experience in Electrical maint. and operation fields in various organization.

Control Electrical HV &LV equipment and Instrumentation Installation & Test, Cable wiring

Petroleum Engineer

9 yr experience in Design,development,implementation & Delivery of SCADA Projects

More 15 years experience in Blasting/Painting Inspector and Supervisor both offshore and onshore work in oil and gas/Plant and FPSO project.Familliar with the all painting specification and colour code

6 years overall experiance in oil & Gas / Petrochemical Industries

A Chemical Engineer (B. Sc., M.Sc.)

I have 9 yrs experience as a Planning Engineer in Oil and Gas sector, please let me know if any suitable vacance available for my knowledge and Experience.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 [ 24 ] 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out