Resume - Throughout my 10+ years of technical experience as a Instrumentation and Control...

Misco Jobs

Resume #39561

CONTACT INFORMATION:
View contact information...

HIGHLIGHTS OF QUALIFICATIONS AND EXPERIENCE
* Instrumentation & Control Engineer, Member of APEGGA and ISA.
* Over 14 years of technical experience in design, pre-commissioning and swing. over of complex control systems in the Oil & Gas industry.
* Extensive on DCS (Bailey, Honeywell) & shut down systems (Triconex, August, HIMA System) and PLC's (Modicon). F&G system (HIMA).
* Prepared and conducted numerous hot swing over.
* Prepared numerous technical bid evaluations of safety and control systems.
* Assessment of safety layer matrix.
* Strong experience in the development of engineering documentation (Cause and Effect, P&ID..Etc) and HIPPS study.
* Design complex control loop interfaces to meet intrinsic safety, circuit and system diagnostic requirements.
* Support the Fieldbus integration with PKS Honeywell System during the FAT
* Leading Instrument and Control discipline, Man-hours and Manpower estimate of projects. Involved in the feasibility of project.

PROFESSIONAL EXPERIENCE
March 2005 – Present
Instrumentation and Control Lead – AKPSC, Calgary, Alberta, Canada
Responsibilities includes Basic and Detail Engineering of 1.443 MMSCFS Gas plant including storage facilities for 30 days, propane refrigerating compressors, 5 residue Compressors, Extraction, Fractionation, two flare (HP flare and Cryo flare) and Four HIPPS. The control system includes HIPPS system, DCS, FGS and ESD system.

November 2004 – March2005
Senior Control Systems Engineer – Fluor, Calgary, Alberta, Canada
Responsibilities included Coordination of the Control System Design between Honeywell Houston and Fluor Calgary, supporting FAT team on Honeywell PKS 201 at PanelMatic facility in Houston reviewing the Control Narratives and Man hours estimate of the Control System for USLD Unit (Diesel Unit in Philadelphia and Eagle Point).

June 2001 – November 2004
Control Systems Engineer – Honeywell, Calgary, Alberta, Canada
Responsibilities included Upgrading and Modernizing the Control System of Naphtha Hydrotreater and Hydrogen plants.

* Designed a complex loops wiring for PLC and DCS.
* Implemented very complex applications using CL program.
* Certify Intresincaly safe loops
* Developed Factory Acceptance Test Plan, Pre-commissioning Plan and Hot Swingover Plan of the Control System.
* Prepared the FAT and Pre-commissioning.
* Conducted a on line swing over of Hydrogen and Naphtha Hydrotreater plants.

July 1999-May 2001
Control Systems Engineer – Brown & Root, Houston, Texas, USA
Responsibilities included a complete design of the DCS and Shutdown System for Anadarko train 2, train 3 and train 4.

* Developed design criteria of the Control System.
* Prepared technical bid evaluation of the Shut down System.
* Assesment of safety layer matrix
* Organized the material requisition for the DCS and Shutdown System.
* Designed the DCS interfaces to communicate with 20 Foreign Devices, including the ASTON Power Management System.
* Implemented interfces between field devices and Control System.
* Supervised the Factory Acceptance Test for the Symphony INFI 90 DCS System and the August CS300E Safety System.
* Provided technical support for 60 RTU. Assisted in solution of installation problems and communication with the DCS.

October 1994 – January 1999
Control Systems Engineer – Brown & Root Algiers, Algeria
* Produced specifications and datasheets of instruments including control valves, pressure Safety valve and flow elements..etc using Instrucalc.
* Developed Control and Instrument design philosophy.
* Developed control system design specifications.
* Developed shutdown system design specifications
* Provide a technical input for Process and Instrumentation Drawings (P&IDs).
* Developed Cause and Effect diagram based on API 14C.
* Assessed the SIL of the Loops.
* Conducted the FAT of the control system.
* Conducted technical bids evaluation.
* Provide support for commissioning and start up teams.

PROJECTS REFERENCES
Available upon request

EDUCATION
Control Systems Engineering degree, University of Algeria, June 1992

PROFESSIONAL AFFILIATION
Association of Professional Engineers, Geologists & Geophysicists of Alberta (APEGGA)
Instrumentation, Systems and Automation Society (ISA)

COMPUTER SKILLS:
Operating Systems: Windows NT 4.0/3.51, Open VMS 3.1 and MS-DOS.
Platforms: NT Workstation, DEC Station, Bailey INFI-90 Engineering Workstation, HMI Workstation FIX 32, and GUS Station.
Softwares: Instrucalc (Sizing of control valves, pressure relief valves, and orifice plates). Intools, Ladder Logic. Documentum, and Access

References: Available upon request.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 1401 to 1450 of 6546)

Go to Search Parameters...

Brief Description

Quality Specialist experienced in Quality Management System, being aware of specific Inspection Techniques, including NDT Techniques and offering over 25 years experience in QA/QC environment acquired in Mettallurgy and Construction (Prestressed Concrete Cylinder Pipes and Oil&Gas Inst.)

Integrity & RBI Inspection Engineer

I am a B.Tech degree holder in Instrumentation passed out from Madras Institute Of Technology, Madras, India and I am having Sixteen years of experience in the field of Instrumentation in maintenance, construction, commissioning and design in petrochemical, refinery, power plants

MS in Civil and Mechanical Engineering, in Alaska, Russian and English language, experienced in Numerical Wave Modeling, Coastal Engineering, Hydrographic Survey, adaptable to changing projects and work schedules and have a proven ability to quickly train on different subjects.

•Engineering, Project Management, Construction Management, Cost Control & Sub-Contract Co-ordination •Oil & Gas, Petro-chem, Cross country Piping •Shutdowns/ Tie-ins •Equipment Installation/ maintenance and commissioning •Structural Fabn & Erecn •Manpower and Resources Planning

I have been working in the UAE since October 2001 as Mechanical Maintenance Supervisor/Commissioning Engineer in the Oil/Gas and Power Industry. Prior to that I held senior positions in the Military as Ship's Chief Engineer, Engine Room I/C, Instructor and In charge of training.

Myanmar/ Singapore PR, MSc in Manufacturing and BEngg in Electrical Power, Total 7 year experience in electrical power, able to do LV design, maintenance, service and commissioning for marine and offshore industry

Maintenance, verification and run in hole of Quarz electronic memory down hole gauges for data acquisition involving static pressure survey, Flowing gradient survey, flowing pressure survey, maximum efficiency rate survey, injectivity / fall off survey, interference test, build up test.

I am qualified mechanical/piping engineer, with extensive experience in pipe stress analysis, hands on experience both in design and field operation.

Experienced, geotechnical engineer / exploration geophysicist

Instrumentation & Control Systems Engineer: Honeywell TPS and ABB Infi-90 Open DCS(Distributed Control Systems), Triconex and ICS Triplex TMR PLC(Programmable Logic Controller) and Process Control Instrumentation.

Project handling and management as piping engineer

Structural engineering, Specialised design engineer in oil & gas, industrial, commercial & residential structures, Holds a Postgraduate Degree in Civil Engineering with Specialisation on Structural Engineering

My skills are Electrical, Hydraulics and Pneumatics.

Reservoir Engineering/Simulation, Software development, Problem Resolution, Customer Service

CSWIP 3.1 Welding Inspector & International Welding Engineer

22 years of overall experience in Oil & Gas Industry in Operations, Project Management, Subsea Works, Facility Engineering, etc.

Machanical engineer as 14 years exprience in manufacturing of cathodic protection anodes ,design and manufacturing of electrochlorinators and special metal fabrication

9 and half Years of working experience in Petrochemical Refinery and Oil & Gas Production / Processing Plant's Instrumentation field (Reliance petroleum Ltd. India, Petroleum Development Oman (Shell-Oman govt joint organization), and Ras Gas-Qatar) as Maintenance Foreman/Technician-Analyzers.

„X Expertise in oil & gas/petrochemical, onshore piping and offshore top side piping.

A highly qualified and skilled Reservoir Engineer with over 7+ years of Domestic and International experience for the long-term management, development and optimization of large, mature fields and associated satellites.Expertise in Production/Petroleum and Reservoir Engineering particularly (expe

Extensive Work Experience

Over 10 years of experience in the field of Industrial Automation covering Conceptual Design, Detailed Design, Software coding and other Engineering services as applicable to Oil & Gas (onshore & offshore) projects and Utility projects.

Fourteen years experience in E&P oil industry. Good knowledge in drilling and production engineering. Extensive experience in well engineering operations in Completion, clean-up, DST, Stimulation, Coil-tubing, Logging, Well survey etc. Good skill in planning, organizing, communicating, interpersonal

An experienced Offshore Procurement Lead

14+ years of experiance in Engineering,Design Engineering specialising in Instrumentation field.

Process Instrument & Control and Analytical Insrument Specialist

I have 20+ years experience in all aspects of electical work, i.e. construction, testing and inspection and commissioning at home and abroad, onshore and offshore.

Thorough technical/commercial knowledge and long experience on design, fabrication and sale of process equipment for oil/gas and energy industries

Innovative and motivated Electrical and Electronics Engineer with 15 years lead experience in Commissioning, Operations of Combined Cycle Gas Power Plants and Thermal Power Plants and Maintenance of Combined Cycle Gas Power Plants and Thermal Power Plants Control & Instrumentation and Electrical S

I am a Certified PeopleSoft Technology Consultant and a Certified PeopleSoft Installer and have worked as a PeopleSoft Systems Administrator for 7 years. I have implemented/upgraded Student Admin, Portal, HRMS and Fin. PeopleSoft systems on various platforms and can implement on any platform.

INSTRUMENTATION & CONTROLS ENGINEER with proven leadership skills, vast experience in the petrochemical and oil & gas industry. Worked for Technip, Tractebel, PDIL, GS E&C in india and aboard.

working as intrument and control technician in Total oil and gas platform Abu dhabi . Involved mainly in Trouble shooting and commissioning activities.

Free! Wellsite - Operations Geologist: Over 25 years experience ( Canada/North Africa) ; Offshore / Onshore Operations; Exploration / Development Drilling; Directional / Horizonital Wells/Geosteering;Supervision of Personnel/ Contractors; OJT of Local nationals:

A competent and qualified Mechanical Engineer with over 20 years experience in functional areas of Project Management, Strategic Management, Mechanical Maintenance, Process Engineering, refurbishment, as well as other allied operations. Presently associated with Saudi Arabia Basic Industries Corpora

Thirteen years of experience in the field of project management, feasibility Studies, front end engineering, conceptual design, Project proposals, detail design, flexibility Analysis, procurement assistance in piping/pipeline design.

Process Engineer in Oil & Gas Consultancy.

Area of Interest AVO/AVA, Inversion, Reservoir characterisation using Pattern Recognition and Spectral Decomposition and Attenuation.

Completion and workover engineer (11.5 years experience)

Experience in field development plan, identification of workover requirements, well completion, acquisition of subsurface data, optimization of well performance and project management,

Piping Designer with 8 years experience in Oil & Gas Engineering and Construction. Have knowledge about Working Specification, Procedure, and International Codes. And also understand about Structural, Instrumentation, NDE and Oil & Gas Process.

9 years of experience in Corrosion Engineering Activities for Oil and Gas Producing Company.

I am hardworking, trustworthy and responsible. I can work under pressure with minimum supervision. I like to take challenges which has a growing and rewarding concepts; love to share and learn new ideas in my working environment.

B.Sc (physics-instrumentation), ACAD and Microstation expert, Designing 12 years experience

Extensive working experience as piping engineer and piping/mechanical pre-commissioning & commissioning engineer.

Experience in Machinery Design and Manufacturing Management. Seven years experience in Sheet fed Offset Printing Machinery Design. Masters degree in Mechanical Engineering and Management

Experienced Electronics and Communication Engineer for 13 years, performing electronics and communication task which includes bench troubleshooting, repair, maintenance, installation and commissioning. Performing Assistant Supervisory task.

xsteel detailer/checker

Throughout my 10+ years of technical experience as a Instrumentation and Control Systems Engineer, I have acquired a strong knowledge. I am currently working for Aker Kvaerner in Canada, leading a group of engineers to design 1.443 MMSCFS gas plant located in Iran

Work experience in the Oil Industry in production, operations and good reservoir skills. Good computing skills, interpersonal relations, ability to work in a team environment.

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 [ 29 ] 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out