Resume - Process Instrument & Control and Analytical Insrument Specialist

Misco Jobs

Resume #40817

CONTACT INFORMATION:
View contact information...

SUMMARY OF QUALIFICATIONS:
Educational Qual: I.Sc
Tech. Qual: I.T.I. (Inst. Tech.) N.C.T.V.T (Govt of India).Ist Class

OBJECTIVE:
I am hereby applying for the abovementioned rotational job. My expected salary is 1500 USD pm

WORK EXPERIENCE:
22 years in Nocil a Shell Company. (From 1980 to 2002)as Inst Foreman

4 mths in ARAMCO, Rastanura, Saudi Arabia. (From 2003 Jan to May 2003)
as Analyzer Tech

Presently working in Relene Petrochemicals Ltd. Reliance as Instrument Consultant

Systrm Worked on:
1) Dcs:
1 Toshiba, Japan (Toosdic 247,247A)
2 Yokogawa, Japan(Centu-xl) Unix based system.

2) Plc:
1 Allen-Bradley (AB 3/10, AB 5/30)
2 Honeywell

Jobs involved:
1) Commissioning of system while converting from pneumatic controls to DCS. Commissioning of Plc while converting from relay logic
2) Tuning of controllers for best operating performance in cascade, auto and feed forward control by adjusting Pid settings.
3) Adding new control logics or modification of existing logic as per requirements.
4) Adding of new trips or trip logic (PLC-ladder diagram).
5) Troubleshooting of Dcs and Plc in case of problem.
6) Checking of proper trip logic operation prior to startup of plant for fail safe system in case of emergency.
7) Routine checks for healthiness of backup battery voltages, cooling fans, system cards, processor cards etc.
3)Field instruments electronic and pneumatic transmitters, receivers, recorders, controllers of flow, pressure,temperature and level of the make of Rosemount, Taylor, Foxboro, Chino, Toshiba 221/215,
Masoneilann, Fuji, Enraf, Magnetrols.
Speed measurement: Bentley Nevada digital tachometer7200 Tach.
Shaft displacement: Electronic weighmeter, for filling and dispatch, Avery Cth.
4) Control valves and Valve positioners.
a) Masoneilan diaphragm operated valves and positioners b) Neles cylinder operated valves c) Electro-pneumatic valves d) Honeywell-Yamatake control valves and positoners e) SMC positioners.
Jobs involved:
1) Servicing, overhauling, loop checking and general maintenance
2) Pressure testing, calibration, seat leak testing of control valves
3) Calibration check of working standards using secondary standard

ADDITIONAL INFORMATION:
1) Fire fighting procedures for hydrocarbon fire, electrical fire etc.
2) Use of protective equipments while working in plant for personal safety.
3) Work permit procedure to work in plant area.
4) Knowledge of duties in case of disaster as per laid down procedure-Emergency disaster plan.
5) Knowledge of first-aid procedure in case of emergency and handling of breathing apparatus.

Analytical instruments worked on:
A) On line G.C. of beckman 6710, 6750 process chromatographs, (USA) Analyzers.
B) Applied Automation (Hartmann and Braun) optichrom advance chromatograph
On line G.C. Analyzers with different column configuration and TCD/FID detectors
C)ABB 3100 G.C. Analyzer with TCD/FID detectors
D)Hartmann & Braun Optichrom Advance FTIR Analyzer.
Jobs involved:
1)Commissioning and shutdown of Analyzer prior to plant startup and shutdown 2)Calibration of analyzers using standard calibration gas for ISO 9002 certification. 3) Servicing of switching valves, sample regulators solenoid valves, sample conditioners.
4) Troubleshooting of electronic cards used in analyzers.
5) Routine checking of sample flows, carrier gas pressure, analyzer oven temperature, fuel and air pressure.
6) Taking chromatographs to check component elution times, adjustments of valve timings, component measurement timings for proper indication.
7) Column regeneration and replacement.
E) Houston Atlas Model 722R Hydrogen Sulfide Analyzer
F) Sarasota FD 810/850 Liquid Density Meter
G) Brookfield Model TT100 In-Line Viscometer
H) Precision Scientific 44860 On-Line Viscosimeter
I) Servomax Oxygen analyzer (Paramagnetic devices) for oxygen. Model oa S40 and 1100.
J) Teledyne oxygen analyzer Model 3000 TA (Micro fuel sensor) for oxygen in nitrogen.
K) On line Sodium analyzer in Demin water of make Polymetron 8582 SODIMAT.
L) Rosemount analytical dissolved oxygen sensor /transmitter model 430DO.
M) Dupont 560 moisture analyzer for cracked gas. Panametric dew point analyzer for instrument air.
N) LEL (lower explosive limit) detectors of following different models.
a) Monicon intelligent combustible gas detector and sensor model S500.
b Polytron drager LEL detector by catalytic combustion of flammable gas.
c) Organic Vapour Meter (OVM) model (sensitive photo-ionization detector).
O) Infra-red ethylene analyzer model 865 Beckman model 815 Rosemount Analytical.
P) pH analyzer/transmitter model 1050 with sensor model 396 of Rosemount.
Q) Model 1181T, two wire toroidal conductivity transmitter.
Jobs involved:
1. Routine checks for indication and working.
2. Commissioning and shutdown prior to plant start-up and shutdown
3. Calibration, zero-checking as per laid down procedures and troubleshooting if problem arises.
4. Scheduled calibration for ISO 9002 reports.

View contact information...

«« previous resume

next resume »»

Search Results (Resumes 2001 to 2050 of 7051)

Go to Search Parameters...

Brief Description

I am a B.Tech degree holder in Instrumentation passed out from Madras Institute Of Technology, Madras, India and I am having Sixteen years of experience in the field of Instrumentation in maintenance, construction, commissioning and design in petrochemical, refinery, power plants

MS in Civil and Mechanical Engineering, in Alaska, Russian and English language, experienced in Numerical Wave Modeling, Coastal Engineering, Hydrographic Survey, adaptable to changing projects and work schedules and have a proven ability to quickly train on different subjects.

•Engineering, Project Management, Construction Management, Cost Control & Sub-Contract Co-ordination •Oil & Gas, Petro-chem, Cross country Piping •Shutdowns/ Tie-ins •Equipment Installation/ maintenance and commissioning •Structural Fabn & Erecn •Manpower and Resources Planning

I have been working in the UAE since October 2001 as Mechanical Maintenance Supervisor/Commissioning Engineer in the Oil/Gas and Power Industry. Prior to that I held senior positions in the Military as Ship's Chief Engineer, Engine Room I/C, Instructor and In charge of training.

Total work experience of 5 years as Chemical engineer. Core competency on steady state process simulation, optimization & de-bottlenecking in the field of Petrochemical & Refinery

Large Water treatment plant like RO plant, DM Plant, Ultra filtration plant, Pretreatment plant Operation, Maintenance and analysis. Large Power plant Boiler(High Pressure Boilers) Water Chemical Treatment and Analysis, Cooling Tower water chemical treatment and analysis, Environmental(Ambient air,

22 years of overall experience in Oil & Gas Industry in Operations, Project Management, Subsea Works, Facility Engineering, etc.

Geologist/Hydrogeologist, 18 years experience, environmental, sedimentary and glacial bedrock and soil deposits, 3-dimensional characterization of fracture zones in bedrock, LNAPL and DNAPL migration pathway analysis.

9 and half Years of working experience in Petrochemical Refinery and Oil & Gas Production / Processing Plant's Instrumentation field (Reliance petroleum Ltd. India, Petroleum Development Oman (Shell-Oman govt joint organization), and Ras Gas-Qatar) as Maintenance Foreman/Technician-Analyzers.

A highly qualified and skilled Reservoir Engineer with over 7+ years of Domestic and International experience for the long-term management, development and optimization of large, mature fields and associated satellites.Expertise in Production/Petroleum and Reservoir Engineering particularly (expe

Extensive Work Experience

Fourteen years experience in E&P oil industry. Good knowledge in drilling and production engineering. Extensive experience in well engineering operations in Completion, clean-up, DST, Stimulation, Coil-tubing, Logging, Well survey etc. Good skill in planning, organizing, communicating, interpersonal

An experienced Offshore Procurement Lead

14+ years of experiance in Engineering,Design Engineering specialising in Instrumentation field.

Process Instrument & Control and Analytical Insrument Specialist

I have 20+ years experience in all aspects of electical work, i.e. construction, testing and inspection and commissioning at home and abroad, onshore and offshore.

Reliability Engineer

A good team player with proven communication skills and ability to Motivate People, drive changes and strive for continual Improvement; Excellent People Management and Interpersonal Skills.

Scaffolding engineer Certified from CITB UK.

I have a M.S. in Petroleum Engineering with emphasis in flow assurance issues. Through my experience I have gain great communication and technical writing skills. Also been in a project has gave me the ability to work well both in teams and individually.

Piping designer, Pipe stress engineer

Mechanical Engineer (Piping- Lyout/PDS)

Working as a instrument technician in al- jubail petrochemical plant saudi arabia. involve in on line instrument and maintenace in low low density poly ehthelene plant(LLDPE) AND (LDPE) low density poly etheylene plabnmt.good knowlawdge of all type honey well ,yokogawa,foxboro and rosemount fisher

Designer/Drafter with Inventor experience.

Thorough technical/commercial knowledge and long experience on design, fabrication and sale of process equipment for oil/gas and energy industries

I am a Certified PeopleSoft Technology Consultant and a Certified PeopleSoft Installer and have worked as a PeopleSoft Systems Administrator for 7 years. I have implemented/upgraded Student Admin, Portal, HRMS and Fin. PeopleSoft systems on various platforms and can implement on any platform.

instrument supervisor libiya.

Drilling Engineer with 4 years experience ,working for a leading Exploration and Production Operator.• Responsible for planning and executing well designs and workover programmes for producer and water injection wells.• Monitor follow all phases of the daily drilling and completion operations, perfo

i am project manager assistant in pressure vessel and road tanks,cylider and on/offsure projects in industrial inspection company

INSTRUMENTATION & CONTROLS ENGINEER with proven leadership skills, vast experience in the petrochemical and oil & gas industry. Worked for Technip, Tractebel, PDIL, GS E&C in india and aboard.

working as intrument and control technician in Total oil and gas platform Abu dhabi . Involved mainly in Trouble shooting and commissioning activities.

A competent and qualified Mechanical Engineer with over 20 years experience in functional areas of Project Management, Strategic Management, Mechanical Maintenance, Process Engineering, refurbishment, as well as other allied operations. Presently associated with Saudi Arabia Basic Industries Corpora

Thirteen years of experience in the field of project management, feasibility Studies, front end engineering, conceptual design, Project proposals, detail design, flexibility Analysis, procurement assistance in piping/pipeline design.

Process Engineer in Oil & Gas Consultancy.

Area of Interest AVO/AVA, Inversion, Reservoir characterisation using Pattern Recognition and Spectral Decomposition and Attenuation.

Completion and workover engineer (11.5 years experience)

Experience in field development plan, identification of workover requirements, well completion, acquisition of subsurface data, optimization of well performance and project management,

Schlumberger 17 years Coiled Tubing / Nitrogen services/Fracturing

Design and drafting OIl and Gas processign facilities, Structural, Piping, Civil. 7 Years experience with 3D CADWORX modelling on Canadian and international projects. Recently worked on Enterprise's Meeker II facility as well as Green River Gas Plant (PROPAK) early 90's.

Bilingual English-Spanish Project Manager with over 6 years of experience working for diverse industries including the Oil, the light and heavy construction, and the Steel Production.

I would like to apply with your company for the position of a INSTRUMENT SUPERVISOR /TECHNICIAN I have 11 years of oilfield ,gas plant ,power plant and some process plants experience as an SUPERVISOR, TECHNICIAN . I am having good work experiance with clients like ENI , IRAN PHASES 4 & 5 KOC -

Responsible for crude evaluation, expansion project related configuration studies, perspective planning and scenario analysis and retro analysis.

I have completed my Masters degree in Chemical Engineering from Lamar University. I have experience in ASPEN PLUS, ASPEN DYNAMICS, HYSYS, PRO-II for two years. I did my internship in Dynamic Engineering Purity Inc. for six months.

HYSYS simulations, process design, optimization, Process flow diagrams (PFD) and P&ID

Presently I am working with M/s B. S. Chaudhry & Co. as a Mud Engineer on E 760-II (1600 HP SCR), M 900-1 (900 HP), M 750 (750 HP), Cardwell-6, & Cardwell-7 since Jan.-2007 to till date continue at Mehsana Asset under MMC contract with ONGCL

Having experience in Mechanical Engineering in the field more than 10 years of Oil and Gas and Manufacturing industries mostly in engineering and inspections. Has worked in INDIA,and SINGAPORE on Onshore & Offshore.

Substation Automation engineer with 5 years of experience

DCS, Control system and Maintenance Engineer

Experienced Electronics and Communication Engineer for 13 years, performing electronics and communication task which includes bench troubleshooting, repair, maintenance, installation and commissioning. Performing Assistant Supervisory task.

E & I designer

First 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 [ 41 ] 42 43 44 45 46 47 48 49 50 Next Last

Seach Parameters


Change search parameters...
CATEGORIES: Engineering/Technicians; INDUSTRIES: Petroleum/Oil/Gas;
Change search parameters...
Keywords: (e.g. mining engineer)		Find results with:


Save this search parameters...
Post job with this search parameters...

Frequently Asked Questions

What's the most effective way to perform a search?
Go to Advanced Search
1. Select 'Industries', 'Categories', 'Education', and 'Experience' fields. Click 'Search' and look through results.
2. Enter one or two of the most important keywords. Click 'Search' and look through results.
3. To search within results add more keywords.

How can I find resumes that contain specific exact phrase?
To search for an exact phrase, just put quotation marks around two or more words, for example "mining engineer". Use this feature to narrow your results or to find words that can be typed differently, for example AutoCAD "Auto CAD".

More Frequenly Asked Questions...

Employer's Center

» Employers Home

» Feedback

» Help

» Post Jobs

» Edit/Delete Jobs

» Search Resumes

» Resumes By Email

» My Account

» Log In

» Log Out